Molecular junctions based on aromatic coupling

If individual molecules are to be used as building blocks for electronic devices, it will be essential to understand charge transport at the level of single molecules. Most existing experiments rely on the synthesis of functional rod-like molecules with chemical linker groups at both ends to provide strong, covalent anchoring to the source and drain contacts. This approach has proved very successful, providing quantitative measures of single-molecule conductance, and demonstrating rectification and switching at the single-molecule level. However, the influence of intermolecular interactions on the formation and operation of molecular junctions has been overlooked. Here we report the use of oligo-phenylene ethynylene molecules as a model system, and establish that molecular junctions can still form when one of the chemical linker groups is displaced or even fully removed. Our results demonstrate that aromatic pi-pi coupling between adjacent molecules is efficient enough to allow for the controlled formation of molecular bridges between nearby electrodes.     

Dissecting contact mechanics from quantum interference in single-molecule junctions of stilbene derivatives

Electronic factors in molecules such as quantum interference and cross-conjugation can lead to dramatic modulation and suppression of conductance in single-molecule junctions. Probing such effects at the single-molecule level requires simultaneous measurements of independent junction properties, as conductance alone cannot provide conclusive evidence of junction formation for molecules with low conductivity. Here, we compare the mechanics of the conducting para-terminated 4,4'-di(methylthio)stilbene and moderately conducting 1,2-bis(4-(methylthio)phenyl)ethane to that of insulating meta-terminated 3,3'-di(methylthio)stilbene single-molecule junctions. We simultaneously measure force and conductance across single-molecule junctions and use force signatures to obtain independent evidence of junction formation and rupture in the meta-linked cross-conjugated molecule even when no clear low-bias conductance is measured. By separately quantifying conductance and mechanics, we identify the formation of atypical 3,3'-di(methylthio)stilbene molecular junctions that are mechanically stable but electronically decoupled. While theoretical studies have envisaged many plausible systems where quantum interference might be observed, our experiments provide the first direct quantitative study of the interplay between contact mechanics and the distinctively quantum mechanical nature of electronic transport in single-molecule junctions.     

Effects of hydration on molecular junction transport

The study of charge transport through increasingly complex small molecules will benefit from a detailed understanding of how contaminants from the environment affect molecular conduction. This should provide a clearer picture of the electronic characteristics of molecules by eliminating interference from adsorbed species. Here we use magnetically assembled microsphere junctions incorporating thiol monolayers to provide insight into changing electron transport characteristics resulting from exposure to air. Using this technique, current-voltage analysis and inelastic electron tunnelling spectroscopy (IETS) demonstrate that the primary interaction affecting molecular conduction is rapid hydration at the gold-sulphur contacts. We use IETS to present evidence for changing mechanisms of charge transport as a result of this interaction. The detrimental effects on molecular conduction discussed here are important for understanding electron transport through gold-thiol molecular junctions once exposed to atmospheric conditions.     

Long-range electron tunnelling in oligo-porphyrin molecular wires

Short chains of porphyrin molecules can mediate electron transport over distances as long as 5-10 nm with low attenuation. This means that porphyrin-based molecular wires could be useful in nanoelectronic and photovoltaic devices, but the mechanisms responsible for charge transport in single oligo-porphyrin wires have not yet been established. Here, based on electrical measurements of single-molecule junctions, we show that the conductance of the oligo-porphyrin wires has a strong dependence on temperature, and a weak dependence on the length of the wire. Although it is widely accepted that such behaviour is a signature of a thermally assisted incoherent (hopping) mechanism, density functional theory calculations and an accompanying analytical model strongly suggest that the observed temperature and length dependence is consistent with phase-coherent tunnelling through the whole molecular junction.     

Precision control of single-molecule electrical junctions

There is much discussion of molecules as components for future electronic devices. However, the contacts, the local environment and the temperature can all affect their electrical properties. This sensitivity, particularly at the single-molecule level, may limit the use of molecules as active electrical components, and therefore it is important to design and evaluate molecular junctions with a robust and stable electrical response over a wide range of junction configurations and temperatures. Here we report an approach to monitor the electrical properties of single-molecule junctions, which involves precise control of the contact spacing and tilt angle of the molecule. Comparison with ab initio transport calculations shows that the tilt-angle dependence of the electrical conductance is a sensitive spectroscopic probe, providing information about the position of the Fermi energy. It is also shown that the electrical properties of flexible molecules are dependent on temperature, whereas those of molecules designed for their rigidity are not.     

In situ formation of highly conducting covalent Au-C contacts for single-molecule junctions

Charge transport across metal-molecule interfaces has an important role in organic electronics. Typically, chemical link groups such as thiols or amines are used to bind organic molecules to metal electrodes in single-molecule circuits, with these groups controlling both the physical structure and the electronic coupling at the interface. Direct metal-carbon coupling has been shown through C60, benzene and π-stacked benzene, but ideally the carbon backbone of the molecule should be covalently bonded to the electrode without intervening link groups. Here, we demonstrate a method to create junctions with such contacts. Trimethyl tin (SnMe(3))-terminated polymethylene chains are used to form single-molecule junctions with a break-junction technique. Gold atoms at the electrode displace the SnMe(3) linkers, leading to the formation of direct Au-C bonded single-molecule junctions with a conductance that is ～100 times larger than analogous alkanes with most other terminations. The conductance of these Au-C bonded alkanes decreases exponentially with molecular length, with a decay constant of 0.97 per methylene, consistent with a non-resonant transport mechanism. Control experiments and ab initio calculations show that high conductances are achieved because a covalent Au-C sigma (σ) bond is formed. This offers a new method for making reproducible and highly conducting metal-organic contacts.     

Molecular Transport Junctions: Clearing Mists

Recent progress in the measurement and modeling of transport in molecular junctions has been very significant. Tunnel transport in the Landauer–Imry regime is now broadly understood for several systems, although a detailed understanding of the role of contact geometry is still required. We overview some clear indications from recent research and note the quite reasonable agreement between measured and calculated conductance in metal–molecule–metal junctions. The next challenge lies in obtaining a microscopic understanding of charge transport that involves reduction or oxidation of molecules.     

Nanoparticle Linker‐Controlled Molecular Wire Devices Based on Double Molecular Monolayers

Highly conductive molecular wires are an important component for realizing molecular electronic devices and have to be explored in terms of interactions between molecules and electrodes in their molecular junctions. Here, new molecular wire junctions are reported to enhance charge transport through gold nanoparticle (AuNP)‐linked double self‐assembled monolayers (SAMs) of cobalt (II) bis‐terpyridine molecules (e.g., Co(II)(tpyphS)₂). Electrical characteristics of the double‐SAM devices are explored in terms of the existence of AuNP. The AuNP linker in the Co(II)(tpyphS)₂–AuNP–Co(II)(tpyphS)₂ junction acts as an electronic contact that is transparent to electrons. The weak temperature dependency of the AuNP‐linked molecular junctions strongly indicates sequential tunneling conduction through the highest occupied molecular orbitals (HOMOs) of Co(II)(tpyphS)₂ molecules. The electrochemical characteristics of the AuNP–Co(II)(tpyphS)₂ SAMs reveal fast electron transfer through molecules linked by AuNP. Density functional theory calculations reveal that the molecular HOMO levels are dominantly affected by the formation of junctions. The intermolecular charge transport, controlled by the AuNP linker, can provide a rational design for molecular connection that achieves a reliable electrical connectivity of molecular electronic components for construction of molecular electronic circuits.     

Creation of stable molecular junctions with a custom-designed scanning tunneling microscope

The scanning tunneling microscope break junction (STMBJ) technique is a powerful approach for creating single-molecule junctions and studying electrical transport in them. However, junctions created using the STMBJ technique are usually mechanically stable for relatively short times (<1?s), impeding detailed studies of their charge transport characteristics. Here, we report a custom-designed scanning tunneling microscope that enables the creation of metal-single molecule-metal junctions that are mechanically stable for more than 1?minute at room temperature. This stability is achieved by a design that minimizes thermal drift as well as the effect of environmental perturbations. The utility of this instrument is demonstrated by performing transition voltage spectroscopy-at the single-molecule level-on Au-hexanedithiol-Au, Au-octanedithiol-Au and Au-decanedithiol-Au junctions.     

Vibronic coupling in semifluorinated alkanethiol junctions: implications for selection rules in inelastic electron tunneling spectroscopy

Determining the selection rules for the interaction of tunneling charge carriers with molecular vibrational modes is important for a complete understanding of charge transport in molecular electronic junctions. Here, we report the low-temperature charge transport characteristics for junctions formed from hexadecanethiol molecules having varying degrees of fluorination. Our results demonstrate that C-F vibrations are not observed in inelastic electron tunneling spectroscopy (IETS). Because C-F vibrations are almost purely dipole transitions, the insensitivity to fluorine substitution implies that Raman modes are preferred over infrared modes. Further, the lack of attenuation of the C-H vibrational modes with fluorine substitution suggests that either the scattering cross section is not an additive quantity or the physical position of a vibrational mode within the junction influences whether the transition is observed in IETS.     

Supramolecular spin valves

Magnetic molecules are potential building blocks for the design of spintronic devices. Moreover, molecular materials enable the combination of bottom-up processing techniques, for example with conventional top-down nanofabrication. The development of solid-state spintronic devices based on the giant magnetoresistance, tunnel magnetoresistance and spin-valve effects has revolutionized magnetic memory applications. Recently, a significant improvement of the spin-relaxation time has been observed in organic semiconductor tunnel junctions, single non-magnetic molecules coupled to magnetic electrodes have shown giant magnetoresistance and hybrid devices exploiting the quantum tunnelling properties of single-molecule magnets have been proposed. Herein, we present an original spin-valve device in which a non-magnetic molecular quantum dot, made of a single-walled carbon nanotube contacted with non-magnetic electrodes, is laterally coupled through supramolecular interactions to TbPc(2) single-molecule magnets (Pc=phthalocyanine). Their localized magnetic moments lead to a magnetic field dependence of the electrical transport through the single-walled carbon nanotube, resulting in magnetoresistance ratios up to 300% at temperatures less than 1 K. We thus demonstrate the functionality of a supramolecular spin valve without magnetic leads. Our results open up prospects of new spintronic devices with quantum properties.     

Kondo effect by controlled cleavage of a single-molecule contact

Conductance measurements of a molecular wire, contacted between an epitaxial molecule-metal bond and the tip of a scanning tunnelling microscope, are reported. Controlled retraction of the tip gradually de-hybridizes the molecule from the metal substrate. This tunes the wire into the?Kondo regime in which the renormalized molecular transport orbital serves as a spin impurity at half-filling and the Kondo resonance opens up an additional transport channel. Numerical renormalization group simulations suggest this type of behaviour to be generic for a common class of metal-molecule bonds. The results demonstrate a new approach to single-molecule experiments with atomic-scale contact control and prepare the way for the ab?initio simulation of many-body transport through single-molecule junctions.     

Single-molecule devices: materials,structures and characteristics

This review article provides a brief survey of materials, structures and current state-of-the-art techniques used to measure the charge conduction characteristics of single molecules. Single molecules have been found to exhibit several unique functionalities including rectification, negative differential resistance and electrical bistable switching, all of which are necessary building blocks for the development and configuration of molecular devices into circuits. Conjugated organic molecules have received considerable interest for their low fabrication cost, three dimensional stacking and mechanical flexibility. Furthermore, the ability of molecules to self-assemble into well-defined structures is imperative for the fabrication of molecule based circuits. The theoretical formalisms are presented for studying single-molecule Coulomb blockade effects, ballistic transport in a molecular chain and electromagnetic coupling between a surface-plasmon field and a single molecule. Moreover, the experimental current–voltage results are discussed using basic principles of carrier transport mechanisms.     

The study of charge transport through organic thin films: mechanism, tools and applications

In this paper, we discuss the current state of organic and molecular-scale electronics, some experimental methods used to characterize charge transport through molecular junctions and some theoretical models (superexchange and barrier tunnelling models) used to explain experimental results. Junctions incorporating self-assembled monolayers of organic molecules - and, in particular, junctions with mercury-drop electrodes - are described in detail, as are the issues of irreproducibility associated with such junctions (due, in part, to defects at the metal-molecule interface).     

Molecular Signatures in the Transport Properties of Molecular Wire Junctions: What Makes a Junction “Molecular”?

The simplest component of molecular electronics consists of a single-molecule transport junction: a molecule sandwiched between source and drain electrodes, with or without a third gate electrode. In this Concept article, we focus on how molecules control transport in metal-electrode molecular junctions, and where the molecular signatures are to be found. In the situation where the molecule is relatively short and the gap between injection energy and molecular eigenstates is large, transport occurs largely by elastic tunneling, stochastic switching is common, and the vibronic signature can be found using inelastic electron tunneling spectroscopy (IETS). As the energy gaps for injection become smaller, one begins to see stronger molecular signatures - these include Franck-Condon-like structures in the current/voltage characteristic and strong vibronic interactions, which can lead to hopping behavior at the polaron limit. Conformational changes induced by the strong electric field lead to another strong manifestation of the molecular nature of the junction. We overview some of this mechanistic landscape, focusing on significant effects of switching (both stochastic and controlled by the electric field) and of molecular vibronic coupling.     

Atomic-scale engineering of electrodes for single-molecule contacts

The transport of charge through a conducting material depends on the intrinsic ability of the material to conduct current and on the charge injection efficiency at the contacts between the conductor and the electrodes carrying current to and from the material. According to theoretical considerations, this concept remains valid down to the limit of single-molecule junctions. Exploring this limit in experiments requires atomic-scale control of the junction geometry. Here we present a method for probing the current through a single C(60) molecule while changing, one by one, the number of atoms in the electrode that are in contact with the molecule. We show quantitatively that the contact geometry has a strong influence on the conductance. We also find a crossover from a regime in which the conductance is limited by charge injection at the contact to a regime in which the conductance is limited by scattering at the molecule. Thus, the concepts of 'good' and 'bad' contacts, commonly used in macro- and mesoscopic physics, can also be applied at the molecular scale.     

Simultaneous measurements of electronic conduction and Raman response in molecular junctions

Electronic conduction through single molecules is affected by the molecular electronic structure as well as by other information that is extremely difficult to assess, such as bonding geometry and chemical environment. The lack of an independent diagnostic technique has long hampered single-molecule conductance studies. We report simultaneous measurement of the conductance and the Raman spectra of nanoscale junctions used for single-molecule electronic experiments. Blinking and spectral diffusion in the Raman response of both p-mercaptoaniline and a fluorinated oligophenylyne ethynylene correlate in time with changes in the electronic conductance. Finite difference time domain calculations confirm that these correlations do not result from the conductance modifying the Raman enhancement. Therefore, these observations strongly imply that multimodal sensing of individual molecules is possible in these mass-producible nanostructures.     

Thermoelectricity in fullerene-metal heterojunctions

Thermoelectricty in heterojunctions, where a single-molecule is trapped between metal electrodes, has been used to understand transport properties at organic-inorganic interfaces. (1) The transport in these systems is highly dependent on the energy level alignment between the molecular orbitals and the Fermi level (or work function) of the metal contacts. To date, the majority of single-molecule measurements have focused on simple small molecules where transport is dominated through the highest occupied molecular orbital. (2, 3) In these systems, energy level alignment is limited by the absence of electrode materials with low Fermi levels (i.e., large work functions). Alternatively, more controllable alignment between molecular orbitals and the Fermi level can be achieved with molecules whose transport is dominated by the lowest unoccupied molecular orbital (LUMO) because of readily available metals with lower work functions. Herein, we report molecular junction thermoelectric measurements of fullerene molecules (i.e., C(60), PCBM, and C(70)) trapped between metallic electrodes (i.e., Pt, Au, Ag). Fullerene junctions demonstrate the first strongly n-type molecular thermopower corresponding to transport through the LUMO, and the highest measured magnitude of molecular thermopower to date. While the electronic conductance of fullerenes is highly variable, due to fullerene's variable bonding geometries with the electrodes, the thermopower shows predictable trends based on the alignment of the LUMO with the work function of the electrodes. Both the magnitude and trend of the thermopower suggest that heterostructuring organic and inorganic materials at the nanoscale can further enhance thermoelectric performance, therein providing a new pathway for designing thermoelectric materials.     

Simultaneous determination of conductance and thermopower of single molecule junctions

We report the first concurrent determination of conductance (G) and thermopower (S) of single-molecule junctions via direct measurement of electrical and thermoelectric currents using a scanning tunneling microscope-based break-junction technique. We explore several amine-Au and pyridine-Au linked molecules that are predicted to conduct through either the highest occupied molecular orbital (HOMO) or the lowest unoccupied molecular orbital (LUMO), respectively. We find that the Seebeck coefficient is negative for pyridine-Au linked LUMO-conducting junctions and positive for amine-Au linked HOMO-conducting junctions. Within the accessible temperature gradients (<30 K), we do not observe a strong dependence of the junction Seebeck coefficient on temperature. From histograms of thousands of junctions, we use the most probable Seebeck coefficient to determine a power factor, GS(2), for each junction studied, and find that GS(2) increases with G. Finally, we find that conductance and Seebeck coefficient values are in good quantitative agreement with our self-energy corrected density functional theory calculations.     

Mechanically Controllable Break Junctions for Molecular Electronics

A mechanically controllable break junction (MCBJ) represents a fundamental technique for the investigation of molecular electronic junctions, especially for the study of the electronic properties of single molecules. With unique advantages, the MCBJ technique has provided substantial insight into charge transport processes in molecules. In this review, the techniques for sample fabrication, operation and the various applications of MCBJs are introduced and the history, challenges and future of MCBJs are discussed.