Super-Thermite (Al/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>) Fluorocarbon Nanocomposite with Stimulated Infrared Thermal Signature via Extended Primary Combustion Zones for Effective Countermeasures of Infrared Seekers

Super-thermites can offer large amount of energy up to 16736 J/g. Flares based on super-thermites can offer superior thermal signature to countermeasure infrared (IR) guided missile seekers. This study reports on the sustainable fabrication of mono-dispersed Fe₂O₃ nanoparticles of 3 nm average particle size. Colloidal Fe₂O₃ nanoparticles were harvested from their synthesis medium and re-dispersed in acetone. Fluorocarbon polymers (teflon and viton) as well as aluminum metal fuel were integrated into Fe₂O₃/acetone colloid. The colloid mixture was granulated and mold pressed to develop the desired grain. The impact of Fe₂O₃ nanoparticles on thermal signature was assessed using (FT-MIR 1–6 µm) spectrometer. Flame propagation was investigated by video imaging of combustion wave. Combustion zones were quantified using image analysis. Quantification of flame temperature and main IR emitting species was performed using ICT thermodynamic code (virgin 2008). Nanocomposite flare with 12 wt% Fe₂O₃ offered an increase in the intensity of β band by 230% to that of reference formulation. The primary reaction zone was extended by 164%. Super-thermite particles not only offered superior spectral performance but also altered the combustion mechanism.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanofiller on ion conductivity,transmittance, and glass transition temperature of PEI:LiTFSI:PC:EC polymer electrolytes

In the present study, ion conductivity, optical properties, and glass transition temperatures are characterized for polymer electrolytes composed of poly(ethyleneimine) (PEI), lithium bis(trifluoromethane)sulfonylimide (LiTFSI) salt, propylene carbonate (PC), and ethylene carbonate (EC). It was doped with nanoceramic particles in different ratio (0–15 wt.%) to see the effect of ceramic particles. The salt concentration was fixed as 1.04 mol.kg^?1. Although valuable improvement in ion conductivity could not be achieved due to nano-Al₂O₃ fillers, ion conductivity results are placed between 10^?2 and 10^?4 S/cm. Differential scanning calorimetry (DSC) measurements and optical measurements of all electrolytes were performed between ?80 and 140 °C, in the wavelength range between 400 and 700 nm for sample with 80 μm thickness, respectively. The results showed that transmittance of electrolytes decreased monotonically for increasing Al₂O₃ contents. In particular, its transmittance value at 550 nm where human sight is at its greatest sensitivity went from 100% without nanoparticles to 50% for 15 wt% of Al₂O₃.     

Adsorption of CO<Subscript>2</Subscript> by iron-exchanged heteropolyacid Fe<Subscript>1.5</Subscript>PMo<Subscript>12</Subscript>O<Subscript>40</Subscript> supported on mesoporous cellular foams

Novel low-temperature swing adsorbents that preferably adsorb CO₂ were synthesized by varying loading of heteropolyacid Fe_1.5PMo₁₂O₄₀ (Fe–PMA) supporting on mesoporous cellular foams (MCFs) by wetting impregnation. The synthesized materials were characterized by various physicochemical, thermal and spectral techniques and the CO₂ adsorption capacity of the materials were evaluated. Solid adsorbents showed a significantly high adsorption capacity toward CO₂ due to the chemisorptions of CO₂. The CO₂ adsorption capacities of the materials decreased as the temperature increased. The results showed that the adsorption capacity reached a level of 81.8 mg CO₂/g-adsorbent at 25 °C for the 20 wt% Fe–PMA–MCFs. These results indicated that the iron (Fe²⁺) complexes acted as efficient catalysts for the separation of CO₂. The as-synthesized adsorbents were selective, thermally stable, long-lived, and could be recycled at a temperature of 110 °C.     

Synthesis and Characterization of Ferromagnetic BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Nanocrystals Using Novel Ionic Precursor Complex [Fe(opd)<Subscript>3</Subscript>]<Subscript>2</Subscript>[Ba(CN)<Subscript>8</Subscript>]

The following investigation reports the synthesis of novel complex [Fe(opd)₃]₂[Ba(CN)₈] and preparation of BaFe₂O₄ nanoparticles through thermal decomposition without using any surfactant. The complex was characterized via Furrier transform infrared spectroscopy (FT-IR), ultra violet-visible spectroscopy (UV–vis), conductivity measurement and elemental analysis. The synthesized crystals of inorganic precursor complex was transferred to furnace, where they were calcined under normal atmosphere condition at 900 °C for 4 h. Formation of BaFe₂O₄ was supported by FT-IR and energy-dispersive X-ray analysis. Hexagonal structure of nano-oxide was confirmed on powder X-ray diffraction. Furthermore, uniform morphology of nanocrystals were reported by scanning electron microscopy. The saturation magnetization (22 emu/g), remanent magnetization (6 emu/g) and coercivity (400 Oe) reported on vibrating sample magnetometer curve illustrates the promising industrial and medicinal applications of prepared mixed oxide.     

One-pot method fabrication of superparamagnetic sulfonated polystyrene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/graphene oxide micro-nano composites

In this work, using monodispersed sulfonated polystyrene (SPS) microspheres as carriers, FeCl₃·6H₂O and FeSO₄·7H₂O as precursors, NaOH as precipitant in the presence of graphene oxide (GO), SPS/Fe₃O₄/GO micro-nano composites were fabricated by a simple one-pot method employing an inverse coprecipitation in-situ compound technology. The SPS/Fe₃O₄/GO micro-nano composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffractometer, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms and vibrating sample magnetometer. The results show that the SPS/Fe₃O₄/GO micro-nano composites were fabricated with SPS as core, GO and Fe₃O₄ nanoparticles as shell. The SPS/Fe₃O₄/GO micro-nano composites had larger BET specific surface area, average pore width and micropore volume than the pure SPS microspheres. Meanwhile, the SPS/Fe₃O₄/GO micro-nano composites had superparamagnetism and hydrophilic property. The saturation magnetization (M_s) of the SPS/Fe₃O₄/GO micro-nano composites was 10.86 emu/g, which was enough to ensure the convenient magnetic separation of solid and liquid phase.     

Synthesis and thermal behavior of Fe<Subscript>3</Subscript>O<Subscript>2</Subscript>(BO<Subscript>4</Subscript>) oxoborate

Iron oxoborate Fe₃O₂(BO₄) has been first produced in solid-phase chemical reactions. Its thermal behavior in the temperature range 20–900°C is studied with the use in-situ high-temperature powder X-ray diffraction. It is shown that Fe₃O₂(BO₄) begins decomposing with the formation of Fe₂O₃ in the temperature range 660–900°C. Thermal expansion is sharply anisotropic at room temperature (α_max/α_min = 7) and becomes more isotropic with an increase in the temperature (α_max/α_min = 1.2). The degree of oxidation of Fe³⁺ has been confirmed by Mössbauer spectroscopy (at a room temperature), and two nonequivalent positions in the structure have been detected, which are occupied by iron atoms with the octahedral environment of the oxygen atoms.     

‘Optical and FT Infrared Absorption Spectra of Soda Lime Silicate Glasses Containing nano Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Effects of Gamma Irradiation

The optical absorption spectra of undoped soda lime silicate glass together with two glasses doped with either (1 % nano Fe₂O₃ ) or with both (1 % Nano Fe₂O₃ + 5 % cement dust) have been measured from 200 to 2400 nm before and after gamma irradiation with a dose of 8 Mrad. The undoped glass reveals strong UV absorption with two distinct peaks which are attributed trace ferric iron ions present as impurity. Upon gamma irradiation , this base glass exhibits three peaks at 240,310 and 340 nm and the resolution of an induced broad visible band centered at 530 nm. The two doped glasses show an additional small visible band at about 440 nm and followed by a very broad band centered at 1050 nm. Upon gamma irradiation, the two doped samples reveal the decrease of the intensities of the spectrum. The two additional bands are related to ferric (Fe⁺³) ions to the band at (440 nm) while and the broad band at 1050 nm is due to ferrous iron (Fe⁺²) ions. The decrease of the intensities of the UV-visible spectrum upon irradiation can be related to of capturing freed electrons during irradiation . Infrared spectra of the glasses reveal repetitive characteristic absorption bands of silicate groups including bending modes of Si–O–Si or O–Si–O, symmetric stretching , antisymmetric stretching and some other peaks due to carbonate , molecular water , SiOH vibrations . Upon gamma irradiation, the IR spectra reveal a small change in the base spectrum while the IR spectra of the two doped glasses remain unchanged. The change of the IR spectrum of the base glass is related to suggested changes in the bond angles or bond lengths of the mid band structural units. The doped glasses show resistance to gamma irradiation because the nano Fe₂O₃ can capture released electrons and positive holes.     

Effect of surface modification of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles on the preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polystyrene composite particles via miniemulsion polymerization

Fe₃O₄ nanoparticles were modified by n-octadecyltrimethoxysilane (C18TMS) and 3-trimethoxysilylpropylmethacrylate (MPS). The modified Fe₃O₄ nanoparticles were used to prepare Fe₃O₄/polystyrene composite particles by miniemulsion polymerization. The effect of surface modification of Fe₃O₄ on the preparation of Fe₃O₄/polystyrene composite particles was investigated by transmission electron microscopy, Fourier transform infrared spectrophotometer (FT-IR), contact angle, and vibrating sample magnetometer (VSM). It was found that C18TMS modified Fe₃O₄ nanoparticles with high hydrophobic property lead to the negative effect on the preparation of the Fe₃O₄/polystyrene composite particles. The obtained composite particles exhibited asymmetric phase-separated structure and wide size distribution. Furthermore, un-encapsulated Fe₃O₄ were found in composite particles solution. MPS modified Fe₃O₄ nanoparticles showed poor hydrophobic properties and resulted in the obtained Fe₃O₄/polystyrene composite particles with regular morphology and narrow size distribution because the ended C=C of MPS on the surface of Fe₃O₄ nanoparticles could copolymerize with styrene which weakened the phase separation distinctly.     

A Resumable Fluorescent Probe BHN-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> Hybrid Nanostructure for Fe<Superscript>3+</Superscript> and its Application in Bioimaging

A multifunctional fluorescent probe BHN-Fe₃O₄@SiO₂ nanostructure for Fe³⁺ was designed and developed. It has a good selective response to Fe³⁺ with fluorescence quenching and can be recycled using an external magnetic field. With adding EDTA (2.5?×?10^?5 M) to the consequent product Fe³⁺-BHN-Fe₃O₄@SiO₂, Fe³⁺ can be removed from the complex, and its fluorescence probing ability recovers, which means that this constituted on-off type fluorescence probe could be reversed and reused. At the same time, the probe has been successfully applied for quantitatively detecting Fe³⁺ in a linear mode with a low limit of detection 1.25?×?10^?8 M. Furthermore, the BHN-Fe₃O₄@SiO₂ nanostructure probe is successfully used to detect Fe³⁺ in living HeLa cells, which shows its great potential in bioimaging detection.     

Structure and electrochemical characterization of LiNi<Subscript>0.3</Subscript>Co<Subscript>0.3</Subscript>Mn<Subscript>0.3</Subscript>Fe<Subscript>0.1</Subscript>O<Subscript>2</Subscript> cathode for lithium secondary battery

A lithium insertion material having the composition LiNi_0.3Co_0.3Mn_0.3Fe_0.1O₂ was synthesized by simple sol-gel method. The structural and electrochemical properties of the sample were investigated using X-ray diffraction spectroscopy (XRD) and the galvanostatic charge-discharge method. Rietvelt analysis of the XRD patterns shows that this compound can be classified as α-NaFeO₂ structure type (R3m; a=2.8689(5) Å and 14.296(5) Å in hexagonal setting). Rietvelt fitting shows that a relatively large amount of Fe and Ni ion occupy the Li layer (3a site) and a relatively large amount of Li occupies the transition metal layer (3b site). LiNi_0.3Co_0.3Mn_0.3Fe_0.1O₂ when cycled in the voltage range 4.3–2.8 V gives an initial discharge capacity of 120 mAh/g, and stable cycling performance. LiNi_0.3Co_0.3Mn_0.3Fe_0.1O₂ in the voltage range 2.8–4.5 V has a discharge capacity of 140 mAh/g, and exhibits a significant loss in capacity during cycling. Ex-situ XRD measurements were performed to study the structure changes of the samples after cycling between 2.8–4.3 V and 2.8–4.5 V for 20 cycles. The XRD and electrochemical results suggested that cation mixing in this layered structure oxide could be causing degradation of the cell capacity.     

Synthesis of polyvinyl alcohol hydrogel grafted by modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: characterization and doxorubicin delivery studies

During the last two decades, serious efforts have been directed towards the synthesis and coating magnetic nanoparticles for biomedical applications. Among many different types of polymeric coating materials that have been utilized in previous studies, we have selected polyvinyl alcohol (PVA). In this study, we report a novel type of magnetite nanocomposite-based PVA hydrogel. For this purpose, first, Fe₃O₄ nanoparticles were modified through hexamethylene diisocyanate (HMDI) and then PVA was modified by bromoacetyl bromide to produce bromoacetylated PVA. The modified PVA was cross-linked through various diamines such as ethylene-diamine, propylene-diamine and hexamethylenediamine. The prepared weak tridimensional PVA hydrogels were further reacted through unreacted hydroxyl groups with Fe₃O₄, modified by HMDI to form magnetite hard tridimensional hydrogels. The swelling behavior of the prepared magnetite nanocomposites were investigated and showed a fast initial swelling followed by a mild increase until attaining equilibrium. The structural, morphological, thermal and magnetic properties of the synthesized magnetite nanocomposites were confirmed by FTIR, thermal gravimetric analysis, vibrating sample magnetometer and scanning electron microscopy. The doxorubicin anti-tumor drug was loaded on a selected synthesized magnetic hydrogel and in vitro drug release studies were done in phosphate buffer solution in 37 °C.     

Novel Colloidal Nanothermite Particles (MnO<Subscript>2</Subscript>/Al) for Advanced Highly Energetic Systems

Nanothermites (metal oxide/metal) are tremendously exothermic and run with self sustaining oxygen content. Manganese oxide is one of the most effective oxidizers for nanothermite applications. This paper reports on the sustainable fabrication of different nanoscopic forms of colloidal manganese oxides including: MnO₂ nanoparticles of 20 nm average particle size and Mn₂O₃ nanorods of 50 nm diameter and 1 µm length. TEM micrographs demonstrated mono-dispersed particles and rods. XRD diffractograms revealed highly crystalline materials. MnO₂ nanoparticles (oxygen content 37 wt%) can offer high oxidizing ability compared with Mn₂O₃ nanorods (oxygen content 30 wt%). The integration of colloidal particles into energetic matrix can offer enhanced dispersion characteristics; consequently stoichiometric binary mixture of MnO₂ and Al nanoparticles were re-dispersed in organic solvent. The integration of developed colloidal nanothermite particles into tri-nitro toluene offered enhanced shock wave strength by 35% using ballistic mortar test. Thanks to nanotechnology which offered sustainable manufacture and subsequent integration of one of the most effective nanothermite particles into highly energetic system.     

Simple One-Pot Preparation of In<Subscript>2</Subscript>O<Subscript>3</Subscript> Nano-particles Using a Supramolecular 3D Framework Polymer

An indium(III) three-dimensional coordination framework, [In₂(OH)₃(O₄C₈H₄)_1.5] _n (1), was synthesized by hydrothermal method and characterized by elemental analyses, X-ray powder diffraction (XRD) and IR spectroscopy. Indium(III) oxide nanoparticles was prepared by direct thermal decomposition of 1 at 450 °C in air. The indium(III) oxide nanoparticles were characterized by scanning electron microscopy, X-ray powder diffraction (XRD) and energy-dispersive X-ray analysis (EDAX). This study demonstrates the coordination polymer frameworks may be suitable precursors for a simple one-pot preparation of nanoscale metal oxide materials with different and interesting morphologies.     

MWCNTs-TiO<Subscript>2</Subscript> core-shell nanoassemblies for fabrication of poly(vinylidene fluoride) based composites with high breakdown strength and discharged energy density

Dielectric polymer composites with high breakdown strength and discharged energy density have potential applications in modern electric power systems. In this study, composites comprising MWCNTs-TiO₂ core-shell nanoparticles and poly(vinylidene fluoride) (PVDF) were fabricated by a solution casting method, followed by a melting and quenching process. The obtained composites are γ-phase PVDF dominated and present a dense structure. By the incorporation of MWCNTs-TiO₂ core-shell nanoparticles, the dielectric constant of composites can be significantly enhanced while the dielectric loss of composites remains low. Because of the core-shell structure of well-dispersed MWCNTs-TiO₂ and their strong interactions with matrix, high breakdown strength above 175 V/μm can be achieved in the composites. Additionally, the composites exhibit enhanced discharged energy density, which can be as high as 6.4 J/cm³ at 250 V/μm, while the maximum discharged energy density obtained in pure PVDF is only 2.6 J/cm³ (270 V/μm).     

Facile fabrication approach for a novel multifunctional superamphiphobic coating based on chemically grafted montmorillonite/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-polydimethylsiloxane binary nanocomposite

In this paper, a novel multifunctional superamphiphobic coating for anticorrosion was successfully prepared on aluminum substrate via a simple spraying technique. Al₂O₃ nanoparticles were chemically grafted onto montmorillonite (MMT) nanosheets via coupling effect of NH₂-C₃H₆-Si(OC₂H₅)₃ (KH-550) and then modified by low surface energy material polydimethylsiloxane (PDMS). The ethylene tetrafluoroethylene (ETFE) composite coating with 25 wt% MMT/Al₂O₃-PDMS binary nanocomposite exhibited well-designed nano/μ structures and possessed superamphiphobicity with high contact angles towards water (164°), glycerol (158°) and ethylene glycol (155°). This coating demonstrated outstanding self-cleaning ability and strong adhesive ability (Grade 1 according to the GB/T 9286). The superhydrophobicity could be maintained after 8000 times abrasion or annealing treatment for 2 h under 350 °C. The coating still retained high water-repellence after immersion in 1 mol/L HCl (146°), 1 mol/L NaOH (144°) and 3.5 wt% NaCl (151°) solutions for 30 d. It should be noted that this superamphiphobic coating revealed excellent long-term corrosion protection with extremely low corrosion rate (4.3 × 10^?3 μm/year) and high protection performance (99.999%) after 30 d immersion in 3.5 wt% NaCl solutions based on electrochemical corrosion measurements. It is believed that such integrated functional coating could pave new way for self-cleaning and anticorrosion applications under corrosive/abrasive environment.     

Synthesis of spinel Ni<Subscript>0.75</Subscript>Zn<Subscript>0.25</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> and the properties of a coating obtained by gas-flame spraying

Ferrite Ni_0.75Zn_0.25Fe₂O₄ was prepared by the solid-state synthesis and thermal decomposition of the complex oxalate Ni_0.75Zn_0.25Fe₂(C₂O₄)₃ · 6H₂O. The oxalate precursor and the products obtained at different stages of the thermal decomposition were identified by differential thermal analysis and X-ray and X-ray photoelectron spectroscopy. The properties of a ferromagnetic coating deposited on a substrate by gasflame coating were studied. The magnetic properties of the Ni-Zn ferrite product and the ferromagnetic coating were also investigated.     

Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

Water absorption,residual mechanical and thermal properties of hydrothermally conditioned nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> enhanced glass fiber reinforced polymer composites

The durability of the nano-Al₂O₃ enhanced glass fiber reinforced polymer (GFRP) composites in hydrothermal environment is necessary for hydro/hygro thermal applications. The present investigation emphasizes the effect of nano-Al₂O₃ filler concentration on moisture absorption kinetics, residual mechanical and thermal properties of hydrothermally treated GFRP nano-composites. Nano-Al₂O₃ particles were mixed with epoxy matrix through temperature assisted magnetic stirrer and followed by ultrasonic treatment. It has been observed that, the addition of 0.1 wt% of nano-Al₂O₃ into the GFRP nano-composites reduces the moisture diffusion coefficient by 10%, as well as improves the flexural residual strength by 16% and interlaminar residual shear strength by 17% as compared to the neat epoxy GFRP composites. However, the glass transition temperature has not been improved by the addition of nano-Al₂O₃ filler. Weibull design parameters have been determined for dry and hydrothermally conditioned nano-composites. A good agreement between the experimental and the simulated stress–strain results has been observed. The interface failure mechanism has been evaluated by field emission scanning electron microscope to support the new findings.     

High toughening and low friction of novel bismaleimide composites with organic functionalized serpentine@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>

A novel hybrid particles Srp@Fe₃O₄/OA, composed of phyllosilicate Serpentine (Srp), magnetic Fe₃O₄ and oleic acid (OA), has been explored via a two-step process. Then the as-prepared Srp@Fe₃O₄/OA particles were firstly mixed with bismaleimide resin (BMI) to constructe a series of Srp@Fe₃O₄/OA/BMI composites, the mechanical properties, tribological properties and thermal stability of the Srp@Fe₃O₄/OA/BMI composites are subsequently investigated. The characterization results indicate that the 0.3 wt% Srp@Fe₃O₄/OA/BMI composite shows the maximum impact strength (19.0 kJ·m^?2) and minimum friction coefficient (0.21), higher 52.7% and lower 55% than those of the neat BMI resin, respectively. The significantly enhanced toughness and tribological performance of the Srp@Fe₃O₄/OA/BMI composites are mainly due to the increase of the free volume and the uniformly distribution of Srp@Fe₃O₄/OA, as well as the good interfacial adhesion between BMI matrix and Srp@Fe₃O₄/OA particles.     

Improvement in dielectric and mechanical performance of CaCu<Subscript>3.1</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12.1</Subscript> by addition of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

The properties of CaCu_3.1Ti₄O_12.1 [CC3.1TO] ceramics with the addition of Al₂O₃ nanoparticles, prepared via a solid-state reaction technique, were investigated. The nanoparticle additive was found to inhibit grain growth with the average grain size decreasing from approximately 7.5 μm for CC3.1TO to approximately 2.0 μm for the unmodified samples, while the Knoop hardness value was found to improve with a maximum value of 9.8 GPa for the 1 vol.% Al₂O₃ sample. A very high dielectric constant > 60,000 with a low loss tangent (approximately 0.09) was observed for the 0.5 vol.% Al₂O₃ sample at 1 kHz and at room temperature. These data suggest that nanocomposites have a great potential for dielectric applications.