Synthesis and structural refinement of fully dehydrated fully Zn<Superscript>2+</Superscript>-exchanged zeolite Y (FAU), |Zn<Subscript>35.5</Subscript>|[Si<Subscript>121</Subscript>Al<Subscript>71</Subscript>O<Subscript>384</Subscript>]-FAU

The single-crystal structure of |Zn_35.5|[Si₁₂₁Al₇₁O₃₈₄]-FAU per unit cell, a = 24.794(1), dehydrated at 673 K and 1 × 10^?6 Torr, has been determined by single-crystal X-ray diffraction techniques in the space group \( Fd\bar{3}m \) at 294(1) K. The structure was refined using all intensities to the final error indices (using the 930 reflections for which F _o > 4σ(F _o)) R ₁ = 0.0448 (based on F) and wR ₂ = 0.1545 (based on F ²). About 35.5 Zn²⁺ ions per unit cell are found at an unusually large number of crystallographic distinct positions, six. The 0.5 Zn²⁺ ion per unit cell is located at the center of double 6-ring (D6R, site I; Zn(I)-O(3) = 2.642(3) Å and O(3)-Zn(I)-O(3) = 81.23(12) and 98.77(12)°). Two different site-I′ positions (in the sodalite cavities opposite D6Rs) are occupied by 14 and 3 Zn²⁺ ions per unit cell, respectively; these Zn²⁺ ions are recessed 0.67 Å and 1.02 Å, respectively, into the sodalite cavities from their 3-oxygens plane (Zn(I′a)-O(3) = 2.094(3) Å, Zn(I′b)-O(3) = 2.23(5) Å, O(3)-Zn(I′a)-O(3) = 110.32(12)°, and O(3)-Zn(I′b)-O(3) = 100.9(30)°). Site-II′ positions (in the sodalite cavities opposite S6Rs) are occupied by 6 Zn²⁺ ions, each of which extends 0.63 Å into the sodalite cavities from their 3-oxygens plane (Zn(II′)-O(2) = 2.164(3) Å and O(2)-Zn(II′)-O(2) = 112.00(12)°). Twelve Zn²⁺ ions are found at two nonequivalent sites II (in the supercage) with occupancies of 7 and 5 ions, respectively; these Zn²⁺ ions are recessed 0.52 Å and 0.96 Å, respectively, into the supercage from their 3-oxygens plane (Zn(IIa)-O(2) = 2.138(12) Å, Zn(IIb)-O(2) = 2.28(4) Å, O(2)-Zn(IIa)-O(2) = 114.2(10)°, and O(2)-Zn(IIb)-O(2) = 103.7(25)°).     

Crystal structure of Pb<Subscript>6</Subscript>O[(Si<Subscript>6</Subscript>Al<Subscript>2</Subscript>)O<Subscript>20</Subscript>]

The crystal structure of Pb₆O[(Si₆Al₂)O₂₀)] is investigated using X-ray diffraction. The compound has tetragonal symmetry, space group I4/mmm, a = 11.7162(10) Å, c = 8.0435(12) Å, and V = 1104.13(2) ų. The structure is refined to R ₁ = 0.036 for 562 unique reflections with [F ₀] ≥ 4σF. The structure contains two symmetrically independent positions of the Pb²⁺ cations coordinated by five O atoms (Pb²⁺-O^2? = 2.34–2.68 Å). The TO₄ tetrahedra (T = Si, Al) form tubular [(Si₆Al₂)O₂₀] chains extended along the c axis. The O₄ oxygen atom is not bonded to the Si and Al atoms and is octahedrally coordinated by six Pb atoms with the formation of an oxo-centered OPb₆ octahedron. The assumption is made that, in some of lead silicate and aluminosilicate glasses, a number of oxygen atoms are located outside the tetrahedral structure and represent segregation centers of the Pb²⁺ cations due to the formation of oxo-centered complexes.     

Synthesis and crystal structure of a new oxohalide CdPb<Subscript>2</Subscript>O<Subscript>2</Subscript>Cl<Subscript>2</Subscript>

A new compound, CdPb₂O₂Cl₂, is synthesized by the method of solid-phase reactions. The compound has monoclinic symmetry, space group C2/m, a = 12.392(8) Å, b = 3.8040(14) Å, c = 7.658(5) Å, β = 122.64(5)°, and V = 304.0(3) ų. The structure contains one symmetrically independent position of the Pb²⁺ cation coordinated by three O^2? anions (Pb²⁺-O^2? = 2.29–2.34 Å) and five Cl^? anions (Pb²⁺-Cl^? = 3.35–3.57 Å). The Cd²⁺ cation has a symmetric coordination with the formation of two bonds Cd-O = 2.15 Å and four bonds Cd-Cl = 2.73 Å. The oxygen atom is tetrahedrally coordinated by three Pb²⁺ cations and one Cd²⁺ cation, which leads to the formation of oxo-centered heterometallic OPb₃Cd tetrahedra. The tetrahedra are linked together into chains through common Pb atoms and into layered complexes due to sharing of the equatorial Cd atoms. The chlorine atoms are located above the cavities of the oxo-centered layer.     

Modification of Cu/Zn/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst by Activated Carbon Based Metal Organic Frameworks as Precursor for Hydrogen Production

In this study, Cu/Zn/Al₂O₃-AC (AC?=?activated carbon) catalyst was synthesized and evaluated for dimethoxymethane (DMM) reformation to hydrogen. The Cu/Zn/Al₂O₃-AC catalyst was prepared using high surface area metal organic frameworks (MOFs) consisting of Cu₃(BTC)₂ (MOF-199) and Zn₄O(BDC)₃ (MOF-5) for Cu(II) and Zn(II) sources respectively, as precursors while γ-Al₂O₃ was applied as support. The synthesized catalyst was investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Brunauer–Emmett–Teller analysis (BET), Temperature programmed desorption (NH₃-TPD) and Energy-dispersive X-ray spectroscopy (EDX) techniques. Complete DMM conversion was observed over Cu/Zn/Al₂O₃-AC catalyst (Cu:Zn:Al mole ratio of 6:3:2) under atmospheric pressure, T?=?533 K, GHSV?=?20 NL h^?1 g_cat^?1, N₂/H₂O/DMM?=?24/5/1 volume percent (vol%) with hydrogen productivity of 12.8 L H₂ h^?1 g_cat^?1 and 64% hydrogen concentration. Application of MOFs as precursors and modified activated carbon as an acidic component provided the catalyst with the porous structure and high specific surface area for the hydrolysis of DMM, subsequently, high selectivity and productivity of hydrogen was obtained.     

Crystal structure of new compound (Rb,K)<Subscript>2</Subscript>Cu<Subscript>3</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>2</Subscript>

A new compound of (Rb,K)₂Cu₃(P₂O₇)₂ is obtained by high-temperature reactions from a mixture of RbNO₃, KNO₃, Cu(NO₃)₂, and (NH₄)₄P₂O₇. The crystal structure was solved by direct methods and refined to R ₁ = 0.056 for 5022 independent reflections. The compound belongs to a rhombic crystal system, P2₁2₁2₁, Z = 8, a = 9.9410(7) Å, b = 13.4754(6) Å, c = 18.6353 (3) Å, and R = 0.056. The basis of the structure is a complex copper-phosphate skeleton of the composition of [Cu₃(P₂O₇)₂]^2–, which can be regarded as consisting of two types of heteropolyhedral layers parallel to the (001) plane. The layers are alternated with each other, forming a frame, in the cavities of which the positions of alkali cations are located, statistically populated with K⁺ and Rb⁺ ions. Based on the refined populations of the positions of alkali cations, an exact chemical formula of the compound can be written as Rb_1.28K_0.72Cu₃(P₂O₇)₂. The compound is the most complex among those known to this day of the composition of A₂ ^IB₃ ^II(P₂O₇)₂ (A = Li, Na, K, Rb, or Cs; B = Ni, Cu, or Zn).     

Structure and electrochemical characterization of LiNi<Subscript>0.3</Subscript>Co<Subscript>0.3</Subscript>Mn<Subscript>0.3</Subscript>Fe<Subscript>0.1</Subscript>O<Subscript>2</Subscript> cathode for lithium secondary battery

A lithium insertion material having the composition LiNi_0.3Co_0.3Mn_0.3Fe_0.1O₂ was synthesized by simple sol-gel method. The structural and electrochemical properties of the sample were investigated using X-ray diffraction spectroscopy (XRD) and the galvanostatic charge-discharge method. Rietvelt analysis of the XRD patterns shows that this compound can be classified as α-NaFeO₂ structure type (R3m; a=2.8689(5) Å and 14.296(5) Å in hexagonal setting). Rietvelt fitting shows that a relatively large amount of Fe and Ni ion occupy the Li layer (3a site) and a relatively large amount of Li occupies the transition metal layer (3b site). LiNi_0.3Co_0.3Mn_0.3Fe_0.1O₂ when cycled in the voltage range 4.3–2.8 V gives an initial discharge capacity of 120 mAh/g, and stable cycling performance. LiNi_0.3Co_0.3Mn_0.3Fe_0.1O₂ in the voltage range 2.8–4.5 V has a discharge capacity of 140 mAh/g, and exhibits a significant loss in capacity during cycling. Ex-situ XRD measurements were performed to study the structure changes of the samples after cycling between 2.8–4.3 V and 2.8–4.5 V for 20 cycles. The XRD and electrochemical results suggested that cation mixing in this layered structure oxide could be causing degradation of the cell capacity.     

Low-temperature anti-icing reagents in the Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-Mg(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-CO(NH<Subscript>2</Subscript>)<Subscript>2</Subscript>-H<Subscript>2</Subscript>O system and their properties

The polytherms of ice melting in sections of the Ca(NO₃)₂-Mg(NO₃)₂-CO(NH₂)₂-H₂O system with different component ratios were studied in the temperature interval from 0 to −40°C. A series of nitrate and nitrate-carbonate reagents that are promising for the creation of anti-acing reagents were found, which form eutectics with ice at temperatures from −25 to −39°C. Their properties, viz., melting properties with respect to ice and corrosiveness on metals and alloys, were determined. An effective corrosion inhibitor was selected.     

Synthesis and crystal structure of the low-temperature modification of Li<Subscript>12</Subscript>Zn<Subscript>4</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>5</Subscript>

The crystal structure of a low-temperature modification of the Li₁₂Zn₄(P₂O₇)₅ compound has been determined by full-profile analysis from the X-ray powder diffraction data. The compound crystallizes in the monoclinic crystal system (a = 5.130(1) Å, b = 13.454(1) Å, c = 8.205(1) Å, β = 90.36(1)°, space group P2₁/n, Z = 4) and has a framework structure in which the zinc and lithium atoms statistically occupy equivalent positions.     

Effect of the relative volume of the conducting phase on the electroconductivity of glasses in the Na<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The effect of the relative volume of the conducting phase on the electroconductivity of phase-separated glasses in the ternary system Na₂O–B₂O₃–SiO₂, whose compositions are on the same glass transition isotherm at 550°C, is investigated. It is demonstrated that the electroconductivity of phase-separated sodium borosilicate glasses does not depend on the relative volume of the conducting phase (within the limits from 0.3 to 0.9) under the condition that its composition invariable.     

Thermal behavior of reedmergnerite NaBSi<Subscript>3</Subscript>O<Subscript>8</Subscript> and searlesite NaBSi<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>2</Subscript>

The results of studying the thermal behavior of natural boron albite–reedmergnerite NaBSi₃O₈ and aqueous boricilicate–searlesite NaBSi₂O₅(OH)₂ obtained by the method of hydrothermal synthesis are presented. In the investigated temperature range, reedmergnerite (30–780°C) does not undergo phase transformations. Thermal expansion is sharply anisotropic, which is a characteristic feature of the expansion of feldspars. Aqueous borosilicate searlesite (25–750°C) is amorphized above 400°C as a result of dehydration and cristobalite crystallizes from the amorphous phase. The expansion of searlesite is relatively isotropic.     

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and their catalytic performance for low-temperature CO<Subscript>2</Subscript> reforming of CH<Subscript>4</Subscript>

A series of Zr-doped ordered mesoporous Al₂O₃ with various Zr contents were synthesized by evaporation-induced self-assembly strategy and the Ni-based catalysts supported on these Al₂O₃ materials were prepared by impregnation method. These catalysts with large specific surface area, big pore volume, uniform pore size possess excellent catalytic performance for the low-temperature carbon dioxide reforming of methane. The activities of these catalysts were tested in carbon dioxide reforming of methane reaction with temperature increasing from 500 to 650?°C and the stabilities of these catalysts were evaluated for long time reaction at 650?°C. It was found that when Zr/(Zr?+?Al) molar ratio?=?0.5%, the Ni/0.5ZrO₂–Al₂O₃ catalyst showed the highest activity, and exhibited superior stabilization compared to the Ni-based catalyst supported on traditional ordered mesoporous Al₂O₃. The “confinement effect” from mesoporous channels of alumina matrix is helpful to stabilize the Ni nanoparticles. As a promoter, Zr could stabilize the ordered mesoporous framework by reacting with Al₂O₃ to form ZrO₂–Al₂O₃ solid solution. Since ZrO₂ enhances the dissociation of carbon dioxide, more oxygen intermediates are given to remove the carbon formed during the reaction.     

Zr K-edge XAS study on ZrO<Subscript>2</Subscript>-pillared aluminosilicate

The ZrO₂-pillared clay with high acidic property has been prepared by reacting 1 wt% colloidal suspension of Na⁺-montmorillonite with 1 N aqueous solution of ZrOCl₂·8H₂O and by subsequent heating. The evolution of local structure around zirconium of the intercalant stabilized in-between aluminosilicate layers upon intercalating, drying, and pillaring condition has been systematically studied by X-ray absorption spectroscopy, and compared to those of reference compounds such as ZrO₂, and ZrOCl₂ · 8H₂O and its 1 N aqueous solution. The intercalated zirconium species was identified as the Zr-tetramer, [Zr₄(OH)₁₄(H₂O)₁₀]²⁺, with an average molecular volume of 10 × 10 Å² and a thickness of 4.5 Å. Also it becomes more condensed upon drying and eventually transforms to a zirconium oxide pillar upon calcination.     

Nonionic polymeric surfactant template for mesoporous NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> formation

Mesostructured NiCo₂O₄ is synthesized in presence of nonionic glucose based polymeric surfactant, β-C₁₀Alkyl Poly Glucoside (β-C₁₀APG). Formed NiCo₂O₄ mesostructures have pore size in the range of 25–65 Å and surface area of 202.9 m²/g. Formed particles are rod shape with 2d hexagonal pattern and Fd3m space group point symmetry. The formation of mesostructure phase is explained by coordination bond formation between metal ions with surfactant head. β-C₁₀APG has the potential to be explored as green template for mesopore formation.     

Synthesis and characterization of zeolite mazzite analogue in Na<Subscript>2</Subscript>O–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–Piperazine–H<Subscript>2</Subscript>O

Zeolite Mazzite (MAZ) analogue was synthesized directly using piperazine as a structure directing agent. The reactive gel composition used was (5.0–7.0) piperazine:(6.0–7.0) Na₂O:Al₂O₃:20.0SiO₂:400H₂O. Using this composition, the reaction time was shortened greatly to 4 days and the crystallization time was reduced as well. The DTA data showed that piperazine, in as-synthesized zeolite omega decomposed easily. The decomposition of the piperazine occurred at 400–480°C. NH₃-TPD analysis proved that zeolite H-omega from piperazine had strong surface acidity with ammonia desorption temperature up to 590°C.     

Highly efficient photocatalytic degradation of methylene blue using carbonaceous WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> composites

Recent improvements in the performance of photocatalysts made it possible to tackle pollution through environment friendly methods. This study investigates the modification of the photocatalytic activity of TiO₂ by employing WO₃ and conductive polymers, namely, polyaniline (Pani) and polypyrrole (Ppy). Basing on our previous improvement of TiO₂ using a conductive polymer and activated carbon (AC), this study determines the activated carbon forms of TiO₂. The prepared composites are characterized using X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared, thermogravimetric analysis, Brunauer–Emmet–Teller, and UV–Vis spectroscopy. The specific surface area of the mesoporous composites is as follows: WO₃/TiO₂·AC (Pani) > WO₃/TiO₂·AC (Ppy) > WO₃/TiO₂·Pani > WO₃/TiO₂·Ppy (127 > 98 > 68 > 44 m² g^?1), which exhibited a similar trend to the photocatalytic performances (100 > 95 > 91 > 72 % conversion rate). This result could be attributed to higher porosity, surge of charge separation, and photo-responding range extension induced by the synergistic effect of WO₃, conducting polymers, and TiO₂ in the samples.     

Uniform color coating of multilayered TiO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> films by atomic layer deposition

Thin film optics, based on light interference characteristics, are attracting increasing interest because of their ability to enable a functional color coating for various applications in optical, electronic, and solar industries. Here, we report on the dependence of coloring characteristics on single-layer TiO₂ thicknesses and alternating TiO₂/Al₂O₃ multilayer structures prepared by atomic layer deposition (ALD) at a low growth temperature. The ALD TiO₂ and Al₂O₃ thin films were studied at a low growth temperature of 80°C. Then, the coloring features in the single-layer TiO₂ and alternating TiO₂/Al₂O₃ multilayers using both the ALD processes were experimentally examined on a TiN/cut stainless steel sheet. The Essential Macleod software was used to estimate and compare the color coating results. The simulation results revealed that five different colors of the single TiO₂ layers were shown experimentally, depending on the film thickness. For the purpose of highly uniform pink color coating, the film structures of TiO₂/Al₂O₃ multilayers were designed in advance. It was experimentally demonstrated that the evaluated colors corresponded well with the simulated color spectrum results, exhibiting a uniform pink color with wide incident angles ranging from 0° to 75°. This article advances practical applications requiring highly uniform color coatings of surfaces in a variety of optical coating areas with complex topographical structures.     

Migration processes in the glass forming melts of the Na<Subscript>2</Subscript>O–BaO–Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The specific conductivity and tracer of diffusion of sodium and barium ions have been determined and the values of the transport numbers and correlation factor for diffusion have been calculated in two melts of the Na₂O–BaO–Ga₂O₃–SiO₂ system.     

Crystallization of glasses in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The crystallization of strontium borate glasses containing 16.7–43.0 mol % SrO is investigated. New crystalline compounds of the hypothetical compositions 2SrO · 3B₂O₃ (metastable) and SrO · 5B₂O₃ (stable below 750°C), as well as the metastable diborate modification β-SrO · 2B₂O₃, are revealed, and their X-ray powder diffraction data are obtained. It is demonstrated that, with a deficit of strontium oxide, the 4SrO · 7B₂O₃ compound forms solid solutions. Strontium triborate SrO · 3B₂O₃, which was previously prepared only through the dehydration of crystal hydrates, is produced using crystallization of glasses. The thermal stability of this compound is studied. The influence of the dispersity on the stability of different crystalline phases is discussed. Variants of the phase diagram for the SrO · B₂O₃-B₂O₃ system in the case of monolithic and dispersed samples are proposed from analyzing the experimental results and the data available in the literature.     

Kinetics and mechanism of the formation of hollandites in the BaO(Cs<Subscript>2</Subscript>O)-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> system from initial mixtures prepared by different methods

The mechanism and kinetics of formation of solid solutions based on hollandite in the BaO(Cs₂O)-Al₂O₃-TiO₂ system are investigated using the initial mixtures prepared by two methods: (i) mechanical grinding and mixing of the initial components and (ii) coprecipitation from aqueous solutions of the salts. It is established that the mechanism of formation of hollandite in the system under investigation depends on the degree of dispersion of the initial mixtures used in the synthesis. When the synthesis is performed with the initial mixture prepared by mechanical grinding and mixing of the initial reactants (the particle size is equal to 50–300 nm), hollandite is formed at temperatures in the range 1100–1250°C in the presence of the accompanying phase Cs₂Al₂Ti₂O₈. When the synthesis is performed with the initial mixture prepared by coprecipitation from aqueous solutions of salts (the particle size is equal to 10–12 nm), hollandite is formed at temperatures in the range 850–1050°C. The investigation into the kinetics of formation of the hollandite phase from the above mixtures made it possible to determine the temperature-time conditions for the synthesis of this titanate in the form of a powder with a particle size of approximately 50 nm or in the form of a dense ceramic material with a particle size of ～200 nm.     

Synthesis and properties of binary spinels in a NiO–CuO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The conditions for the formation of a spinel structure from a NiO–CuO–Fe₂O₃–Cr₂O₃ oxide mixture using several technological approaches have been examined. Addition of KCl is accompanied with the formation of two spinel-like phases, whereas in the absence of KCl just one solid solution of nickel–copper ferrite–chromite with the structure of a cubic spinel is formed. At the temperature of thermal treatment of 900°C, the presence of an admixture phase of the delafossite (CuCrO₂) type was established. The conditions for the fabrication of samples containing two spinel phases (cubic and tetragonal) characterized with the most developed surface and manifesting = increased catalytic activity in the reaction of the decomposition of an organic substance by hydrogen peroxide have been formulated. The studied features of spinel synthesis can be of interest for developing materials with an active surface promising for application as adsorbents of catalysts and sensors.