Grafting of hydrophilic monomers onto aminopropyl‐functionalized sodium montmorillonite via surface‐initiated redox polymerization

Hydrophilic polymer/sodium montmorillonite (Na‐MMT) hybrid nanomaterials were prepared via surface‐initiated redox polymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (PAMPS‐g‐MMT), acrylamide (PAAm‐g‐MMT) and styrenesulfonic acid sodium salt (PSSA‐g‐MMT) from surface of aminopropyl‐functionalized sodium montmorillonite (AMMT) dispersed in an aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and aminopropyl groups on the surface of AMMT were used as oxidant and reducing groups, respectively. AMMT was prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of Na‐MMT. Hydrophilic monomers (AMPS, AAm and SSA) were then grafted onto AMMT dispersed in water via redox initiation at 40 °C. Structure, morphology and thermal properties of the AMMT, PAMPS‐g‐MMT, PAAm‐g‐MMT and PSSA‐g‐MMT hybrid materials were characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric (TGA) analyses, respectively. FTIR results indicated that hydrophilic monomers were successfully grafted onto the surface of MMT. Grafting amounts of the hydrophilic polymers were estimated from TGA thermograms to be 28.8, 118.8 and 14.4% for PAMPS, PAAm and PSSA, respectively. XRD patterns showed an exfoliated morphology for PAMPS‐ and PAAm‐grafted MMT hybrid nanomaterials and an intercalated/exfoliated morphology for the PSSA‐grafted MMT one. The effect of the nature of hydrophilic monomer on the grafting efficiency is discussed in detail. © 2013 Society of Chemical Industry     

2,2,6,6‐Tetramethylpiperidine‐1‐oxyl‐mediated living mini‐emulsion polymerization of styrene under ambient pressure in a semi‐batch process: effect of ascorbic acid

2,2,6,6‐Tetramethylpiperidine‐1‐oxyl (TEMPO)‐mediated living mini‐emulsion polymerization of styrene with feeding of an ascorbic acid aqueous solution throughout the polymerization was performed at 90 °C under ambient pressure. The concentrations of sodium dodecylbenzenesulfonate (SDBS) and ascorbic acid were varied to study the shell polymerization mechanism of latex particles and evolution of growing chains. Interactions between SDBS and ascorbic acid and incompatibility between ascorbic acid and styrene were evident from UV‐visible analyses. High hydrophilicity of ascorbic acid in the aqueous phase was proved using a gravimetric method. Accordingly, the formation of a surface barrier on particles was proposed because of the interactions between SDBS and ascorbic acid. For higher SDBS concentration, the surface barrier on the particles was denser. Therefore, the polymerization rate decreased with increasing SDBS concentration. However, the polymerization rate increased with increasing ascorbic acid concentration. This was due to a higher consumption rate of TEMPO by ascorbic acid. Free TEMPO tended to reside in surface zones of the particles because of the surface activity between the aqueous and oil phases. The surface zones were thus the main loci where TEMPO was consumed by ascorbic acid. The estimated number‐average molecular weight (M_n) of growing chains increased in a linear fashion with conversion. This indicated that the growing chains were produced via living mini‐emulsion polymerization. For these growing chains, the estimated M_n and final polydispersity increased with increasing SDBS concentration. This was caused by a decrease in TEMPO concentration in the surface zones of particles with increasing SDBS concentration. The ‘livingness’ of polystyrene was identified by conducting bulk polymerization of chain extension. Based on the results obtained, a shell polymerization mechanism of latex particles was proposed, and living mini‐emulsion polymerization was limited to the surface zones of particles. Copyright © 2010 Society of Chemical Industry     

Application of a new unimolecular initiator in the synthesis of (α,ω) ketone functionalized polystyrene in nitroxide mediated polymerization

The ketone functionalized N‐alkoxyamine, a derivative of 4‐oxo‐2,2,6,6‐tetramethylpiperidin‐1‐oxyl (4‐oxo‐TEMPO) was synthesized and applied as an initiator in the nitroxide mediated polymerization of styrene in bulk at 120°C. In the presence of the prepared initiator: 1‐phenyl‐1‐(4‐oxo‐2,2,6,6‐tetramethylpiperidinoxy)propanone polymers with well‐defined molecular weight were obtained. By contrast, when an accelerator such as acetic anhydride (10%) was added to the system, lower control of polymerization was observed. Additionally, the functionality of polymers was evaluated on the basis of a quantitative investigation of UV–visible spectra of 2,4‐dinitrophenylhydrazone formed from the polymers and the synthesized initiator. The UV–vis spectra of the hydrazone derivatives obtained from polymers by means of 2,4‐dinitrophenylhydrazone made it possible to confirm that the polymers prepared in the presence of the ketone functionalized N‐alkoxyamine retain the ketone functionality on the polymer chain. The functionality for the obtained polymers exceeded 1 significantly. The obtained (α, ω) telechelic polymers are of great importance in the synthesis of new biohybrid materials such as bioconjugates with proteins or peptides as well as new polymer nanostructures. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Synthesis of poly[(decanoic acid)‐block‐styrene] diblock copolymers and their self‐assembly behavior in aqueous medium

Diblock copolymers, poly[(10‐hydroxydecanoic acid)‐block‐styrene] (PHDA‐b‐PSt), were synthesized by combining enzymatic condensation polymerization of HDA and atom transfer radical polymerization (ATRP) as of St PHDA was first obtained via enzymatic condensation polymerization catalyzed by Novozyme‐435. Subsequently, one terminus of the PHDA chains was modified by reaction with α‐bromopropionyl bromide and the other terminus was protected by chlorotrimethylsilane. The resulting monofunctional macroinitiator was used subsequently in ATRP of St using CuCl/2,2′‐bipyridine as the catalyst system to afford diblock copolymers including biodegradable PHDA blocks and well‐defined PSt blocks. Polymeric nanospheres were prepared by self‐assembly of the PHDA‐b‐PSt diblock copolymers in aqueous medium. Copyright © 2008 Society of Chemical Industry     

Synthesis and reactivity of functionalized alkoxyamine initiators for nitroxide‐mediated radical polymerization of styrene

The synthesis and examination of different functionalized (2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical) TEMPO‐containing alkoxyamine initiators for nitroxide‐mediated radical polymerization of styrene are reported. Initiators with ester and carbonate functional groups were synthesized by a low‐temperature radical‐abstraction reaction of the functionalized ethylbenzene in the presence of TEMPO to introduce the functional groups onto the initiating chain‐end of polystyrene. An initiator with two alkoxyamine groups symmetrically located at each end of a carbonate bond was also synthesized and used for nitroxide‐mediated styrene polymerization. Styrene polymerization using these initiators followed first‐order kinetics up to approximately 60 min at 140 °C or 30% monomer conversion. Alkoxyamines bearing an acetoxy or tert‐butylcarbonate group at the p‐position of 1‐(2,2,6,6‐tetramethyl‐1‐piperidinyloxy)ethylbenzene behave in a similar way to the unfunctionalized initiator. With an initiator containing two alkoxyamine groups, the resulting polymer molecular weight was twice that of the polymer obtained from initiators with only one alkoxyamine group, as expected from propagation from both chain‐ends. Upon hydrolysis of the carbonate bond, it was revealed that equivalent polymer chain growth occurred from each alkoxyamine site in the difunctional initiator. Copyright © 2003 Society of Chemical Industry     

Graft copolymerization of thiophene onto polystyrene synthesized via nitroxide‐mediated polymerization and its polymer − clay nanocomposite

A new strategy for graft copolymerization of thiophene onto a polystyrene (PSt) backbone by a multi‐step process is suggested and the effects of an organoclay on the final properties of the graft copolymer sample are described. For this purpose, first poly(styrene‐co‐4‐chloromethyl styrene) [P(St‐co‐CMSt)] was synthesized via nitroxide‐mediated polymerization. Afterwards, the chlorine groups of P(St‐co‐CMSt) were converted to thiophene groups using the Kumada cross‐coupling reaction and thiophene‐functionalized PSt multicenter macromonomer (ThPStM) was synthesized. The graft copolymerization of thiophene monomers onto PSt was initiated by oxidized thiophene groups in the PSt chains after addition of ferric chloride (FeCl₃), an oxidative catalyst for polythiophene synthesis, and FeCl₃‐doped polythiophene was chemically grafted onto PSt chains via oxidation polymerization. The graft copolymer obtained was characterized by ¹H NMR and Fourier transform infrared spectroscopy, and its electroactivity behavior was verified under cyclic voltammetric conditions. Finally, PSt‐g‐PTh/montmorillonite nanocomposite was prepared by a solution intercalation method. The level of dispersion of organoclay and the microstructure of the resulting nanocomposite were probed by means of XRD and transmission electron microscopy. It was found that the addition of only a small amount of organoclay (5 wt%) was enough to improve the thermal stabilities of the nanocomposite.© 2013 Society of Chemical Industry     

Functional copolymer/organo‐MMT nanoarchitectures. II. Dynamic mechanical behavior of poly(MA‐co‐BMA)s‐organo‐MMT clay nanocomposites

Functional copolymer/organo‐silicate [N,N′‐dimethyldodecyl ammonium cation surface modified montmorillonite (MMT)] layered nanocomposites have been synthesized by interlamellar complex‐radical copolymerization of preintercalated maleic anhydride (MA)/ organo‐MMT complex as a ‘nano‐reactor’ with n‐butyl methacrylate (BMA) as an internal plasticization comonomer in the presence of radical initiator. Synthesized copolymers and their nanocomposites were investigated by dynamic mechanic analysis, X‐ray diffraction, SEM, and TEM methods. It was found that nanocomposite dynamic mechanical properties strongly depend on the force of interfacial MA … organo‐MMT complex formation and the amount of flexible n‐butyl ester linkages. An increase in both of these parameters leads to enhanced intercalation and exfoliation in situ processes of copolymer chains and the formation of hybrid nanocomposites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and kinetic analysis of PS‐b‐PBA block copolymer by 4‐oxo‐TEMPO capped polystyrene macroinitiators

Polystyrene‐block‐poly(n‐butyl acrylate) block copolymers were prepared from 4‐oxo‐2,2,6,6‐tetramethylpiperidinooxy (4‐oxo‐TEMPO) capped polystyrene macroinitiators at a high temperature, 165°C. It was found that the number‐average molecular weight of PBA chains in block copolymers could reach above 10,000 rapidly at early stage of polymerization with a narrow polydispersity index of 1.2–1.4, but after that, the polymerization seemed to be retarded. Furthermore, according to the kinetic analysis, the concentration of 4‐oxo‐TEMPO was increased mainly by the hydrogen transfer reaction of hydroxylamine (4‐oxo‐TEMPOH) to growing radicals during polymerization. This increase in 4‐oxo‐TEMPO concentration could retard the growth of polymer chains. The rate constant of the hydrogen transfer reaction of 4‐oxo‐TEMPOH to growing radicals, k_H, estimated by the kinetic model is about 9.33 × 10⁴M^‐1s^?1 at 165°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study of a new titanium dual initiator for the synthesis of poly(ε‐caprolactone)‐b‐polystyrene block copolymers by the combination of coordination and nitroxide mediated polymerizations

Poly ε‐caprolactone‐polystyrene block‐copolymers (PCL‐b‐PSt) were synthesized using a modified titanium catalyst as the dual initiator. Alcoholysis of Ti(OPr)₄ by 4‐hydroxy 2,2,6,6 tetramethyl piperidinyl‐1‐oxyl (HO‐TEMPO) gave a bifunctional initiator Ti(OTEMPO)₄. Poly ε‐caprolactone prepolymer end‐capped with the nitroxide group was first prepared by ring opening polymerization of ε‐caprolactone with this initiator at high conversion. The nitroxide‐end‐capped structure and molar mass (M_n) of the polymers were demonstrated by typical UV absorption band. This analytical technique indicates a near‐quantitative nitroxide functionality and a M_n in good agreement with size exclusion chromatography (SEC) ones. This polyester prepolymer was used to further initiate the radical polymerization with styrene and reach the block copolymers (PCL‐b‐PSt). All the prepolymers and block copolymers were characterized by SEC and NMR spectroscopy. Additionally, the preparation of star polymers bearing two kinds of arms (PCL and PSt) was envisaged and a preliminary result was given. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of DMF on the polymerization of tert‐butyl acrylate initiated by 4‐oxo‐TEMPO‐capped polystyrene macroinitiator

BACKGROUND: In a number of studies it has been shown that 2,2,6,6‐tetramethylpiperidinooxy (TEMPO)‐mediated polymerization of acrylates is not facile. Therefore, the object of the study reported here was to prepare poly[styrene‐block‐(tert‐butyl acrylate)] (PS‐b‐PtBA) block copolymers using 4‐oxo‐TEMPO‐capped polystyrene macroinitiator as an initiator, in the presence of small amounts of N,N‐dimethylformamide (DMF). The kinetic analysis and the effect of DMF on the reaction mechanism are also discussed. RESULTS: PS‐b‐PtBA block copolymer was prepared through polymerization of tert‐butyl acrylate (tBA) initiated by 4‐oxo‐TEMPO‐capped polystyrene macroinitiator at 135 °C. The polymerization rate of tBA could be increased by adding a small amount of DMF, and the number average molecular weight of the PtBA block in PS‐b‐PtBA reached 10 000 g mol^?1 with narrow polydispersity. The activation rate constant k_act?tBA of alkoxyamine increased and the recombination rate constant k_rec?tBA decreased with increasing DMF concentration. CONCLUSION: DMF was shown to be a rate‐enhancing additive for the polymerization of tBA using a 4‐oxo‐TEMPO‐capped polystyrene macroinitiator. From the kinetic analysis, it was concluded that the improvement of polymerization with the addition of DMF was due to an increase in k_act?tBA and a decrease in k_rec?tBA. Copyright © 2008 Society of Chemical Industry     

A Semi‐Batch Process for Nitroxide Mediated Radical Polymerization

Summary: A semi‐batch process using nitroxide mediated polymerization, was explored for the design of low molecular weight solvent‐borne coatings, typical of those used in the automotive industry. While living radical polymerization (LRP) offers many advantages in the control of polymer chain microstructure that may confer important physical and chemical property benefits to coatings, adapting LRP to a semi‐batch process poses significant challenges in the design and operation of the process. Using styrene monomer, various two‐component initiating systems (free radical initiator, 4‐hydroxy‐TEMPO) were studied to understand the effects of different initiators on the course of polymerization. In addition, an alkoxyamine was synthesized and used as the initiating source. The initiators Luperox 7M75 and Luperox 231 give higher polymerization rates and reasonable control over polymerization, while benzoyl peroxide (BPO), Vazo 67, and the alkoxyamine are less effective. The number of polymer chains in the final product is always less than the theoretical value, reflecting poor initiation efficiency, probably resulting from undesirable termination reactions that become important due to the nature of the semi‐batch process. Adding camphorsulfonic acid (CSA) or charging initiator concurrently with monomer during semi‐batch feed, can increase the polymerization rate while maintaining the living character of the polymerization. The copolymerization of styrene and butyl acrylate is also shown to exhibit living character.

Schematic representation of the exchange reaction to produce N‐TEMPO capped polymer chains.     

Synthesis and characterization of poly(acrylonitrile)/montmorillonite nanocomposites from surface‐initiated redox polymerization

We have developed a facile method to prepare polyacrylonitrile/montmorillonite (PAN/MMT) nanocomposites using the surface‐initiated redox polymerization of acrylonitrile (AN) in the aqueous phase. The MMT silicate surfaces were first treated with diethanolamine, and the modified MMT (DEA‐MMT) was subsequently used together with the Ce(IV) salt to serve as a redox system. The PAN chains growing on a surface‐tethered DEA expand the interlayer space, and thus lead to intercalated/exfoliated nanocomposites. The nano‐morphology of the prepared nanocomposites depends on the AN/OH molar ratio in feed. An exfoliated PAN/MMT nanocomposite was obtained when the feeding AN/OH molar ratio = 300 was used. The molecular weight of PAN in the nanocomposites prepared by the present method is also dependent on the AN/OH molar ratio in feed and can be up to ca. 160,000 g/mol. The differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA) analyses show that the increasing fraction of exfoliated silicate structures should enhance the contact interface between the silicate and polymer, resulting in the higher glass transition temperature and thermal stability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Influence of the type of quaternary ammonium salt used in the organic treatment of montmorillonite on the properties of poly(styrene‐co‐butyl acrylate)/layered silicate nanocomposites prepared by in situ miniemulsion polymerization

Hybrid latices of poly(styrene‐co‐butyl acrylate) were synthesized via in situ miniemulsion polymerization in the presence of 3 and 6 wt % organically modified montmorillonite (OMMT). Three different ammonium salts: cetyl trimethyl ammonium chloride (CTAC), alkyl dimethyl benzyl ammonium chloride (Dodigen), and distearyl dimethyl ammonium chloride (Praepagen), were investigated as organic modifiers. Increased affinity for organic liquids was observed after organic modification of the MMT. Stable hybrid latices were obtained even though miniemulsion stability was disturbed to some extent by the presence of the OMMTs during the synthesis. Highly intercalated and exfoliated polymer‐MMT nanocomposites films were produced with good MMT dispersion throughout the polymeric matrix. Materials containing MMT modified with the 16 carbons alkyl chain salt (CTAC) resulted in the largest increments of storage modulus, indicating that single chain quaternary salts provide higher increments on mechanical properties. Films presenting exfoliated structure resulted in the largest increments in the onset temperature of decomposition. For the range of OMMT loading studied, the nanocomposite structure influenced more significantly the thermal stability properties of the hybrid material than did the OMMT loading. The film containing 3 wt % MMT modified with the two 18 carbons alkyl chains salt (Praepagen) provided the highest increment of onset temperature of decomposition. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nitroxide-mediated radical polymerization of styrene in miniemulsion: model studies of alkoxyamine-initiated systems

A mathematical model has been developed to describe the behavior of the nitroxide-mediated miniemulsion polymerization (NMMP) of styrene initiated by alkoxyamine initiators. The model includes mechanisms describing reactions in the aqueous and organic phases, particle nucleation, the entry and exit of oligomeric radicals, and the partitioning of nitroxide and styrene between the aqueous and organic phases. The influence of nitroxide partitioning on the polymerization kinetics was examined by modeling systems initiated by the alkoxyamines BST and hydroxyl-BST; BST and hydroxyl-BST are benzoylstyryl radicals terminated by the nitroxides TEMPO and 4-hydroxyl-TEMPO, respectively.Predicted monomer conversions, number average molecular weights and polydispersities were in agreement with experimentally measured values. Simulations and mathematical analysis showed that the rate of styrene NMMP is not strongly influenced by the partitioning properties of TEMPO and 4-hydroxyl-TEMPO because of the complex interaction between reaction equilibrium, phase equilibrium, termination and thermal initiation. However, in the absence of styrene thermal initiation, nitroxide partitioning was found to have a significant influence on the polymerization kinetics. The model was also used to make quantitative estimates of: the population of active and dormant polymer radicals derived from both alkoxyamine initiators and thermal initiation; the population of dead polymer chains; and the number molecular weight distributions of living and dead polymer chains.     

Preparation of poly(styrene‐co‐butyl acrylate)/montmorillonite nanocomposite by emulsion polymerization: Characterization and nanoscratch behavior

Organic–inorganic hybrid poly(styrene‐co‐butyl acrylate)/organically modified montmorillonite (PSBA/organo‐MMT) latex particles have been prepared by in situ emulsion polymerization. The effects of modifier variety and the level of organo‐MMT have been investigated on the basis of the characteristics and mechanical properties of the resulting hybrid emulsion polymers. Although the more hydrophilic intercalated organic modifiers increased the latex particle size, the hydrophobic ones decreased the particle size. A more heterogeneous copolymer chain intercalation was seen by widespread XRD reflection as the organo‐MMT (organoclay) level increases. The tapping mode atomic force microscopy (AFM) and transmission electron microscopy (TEM) were used to determine the dispersion state of organoclay particles inside the nanocomposite copolymer films. Dynamic mechanical thermal analysis (DMTA) showed that adding the organoclay to the copolymer decreased the maximum loss tangent (tanδ) value and caused the shift to a lower temperature. Interestingly, the incorporation of organoclay decreased the glass storage modulus of the copolymer, while increased the rubbery storage modulus to some extent. In addition, a standard indenter for the nanoscratching of copolymer nanocomposite films was used under low applied loads of 150 and 250 μN. The nanoscratch results showed that incorporation of a 3 wt % hydrophobic organoclay, e.g., Closite15A, in the copolymer matrix enhanced considerably the near‐surface hardness and grooving resistance of the nanocomposite film at room temperature. In fact, copolymer nanocomposite films with higher near‐surface hardness and tanδ curve broadening exhibited more nanoscratch resistance through a specific variety of viscoelastic deformation, which did not create a bigger groove. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Interfacial‐initiated seeded emulsion polymerization: preparation of polystyrene/poly(methacrylic acid) core/shell particles in the absence of surfactant

Composite polymer particles with hydrophobic polystyrene (PSt) as the core and hydrophilic poly(methacrylic acid) (PMAA) as the shell were prepared through two‐stage emulsion polymerization without any surfactant. In the first step, narrowly distributed PSt seed particles were prepared by surfactant‐free emulsion polymerization with 2,2′‐azobis(2‐methylpropionamide) dihydrochloride (AMPA) as the initiator. In the second step, hydrophilic PMAA shells were fabricated onto PSt seed particles through redox interfacial‐initiated seeded emulsion polymerization with cumyl hydroperoxide (CHPO)/ferrous sulfate/ethylenediaminetetraacetic acid (EDTA)/sodium formaldehydesulfoxylate (SFS), where the initiation took place mainly at the interface between PSt seed particles and the aqueous medium. The composite particles were characterized with transmission electron microscopy, fourier transform infrared spectroscopy and dynamic light scattering, and the results show that a core/shell structure was successfully built. Hydrodynamic radius (R_h) of the composite particles increased with the amount of polymerized monomers in the seeded emulsion polymerization. Copyright © 2006 Society of Chemical Industry     

Preparation and characterization of PSt‐b‐PHEMA metal hybrids

The block copolymer polystyrene‐b‐poly[2‐(trimethylsilyloxy)ethylene methacrylate] (PSt‐b‐PTMSEMA) was synthesized using atom‐transfer radical polymerization (ATRP). The hydrolysis of PSt‐b‐PTMSEMA led to the formation of an amphiphilic block copolymer, polystyrene‐b‐poly(2‐hydroxylethyl methacrylate) (PSt‐b‐PHEMA), which was characterized by GPC and ¹H‐NMR. TEM showed that the PSt‐b‐PHEMA formed a micelle, which is PSt as the core and PHEMA as the shell. Under appropriate conditions, the nickel or cobalt ion cause chemical reactions in these micelles and could be reduced easily. ESCA analysis showed that before reduction the metal existed as a hydroxide; after reduction, the metal existed as an oxide, and the metal content of these materials on the surface is more than that on the surface of the copolymer metal ion. XRD analysis showed that the metal existed as a hydroxide before reduction and existed as a metal after reduction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2883–2891, 2002; DOI 10.1002/app.10278     

A facile strategy for the functionalization of poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] materials

Recently, a new type of phosphazene‐containing material, poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] (PZS), was successfully prepared. PZS materials including PZS nanotubes, PZS nanofibers and PZS microspheres show excellent thermal stability, biocompatibility and biodegradability. Moreover, PZS‐containing materials such as silver nanowire/PZS, carbon nanotube/PZS and Fe₃O₄/PZS nanotubes have also been prepared. Therefore, we explored a specific method for the functionalization of these PZS and PZS‐containing materials to expand their scope of application. As a model of various PZS and PZS‐containing materials, PZS microspheres (PZSMs) were functionalized via surface‐initiated atom transfer radical polymerization (ATRP). Polymerization of styrene occurred at surface sites covalently derivatized with ATRP initiators to form PZSM–polystyrene. The number‐average molecular weight (M_n) of grafted polymer chains could be well controlled. Furthermore, PZSM–polystyrene was still active for further block copolymerization of methyl methacrylate. Both styrene‐ and acrylate‐type monomers could be directly polymerized or block copolymerized from the surface of PZS and PZS‐containing materials using surface‐initiated ATRP. M_n of grafted polymer chains could be well controlled. This facile strategy could pave the way for a wider range of applications of these materials. Copyright © 2010 Society of Chemical Industry     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002