One‐step synthesis of bis‐macromonomers of poly(1,3‐dioxolane) catalyzed by Maghnite‐H+

Telechelic poly(1,3‐dioxolane) (PDXL) bis‐macromonomers bearing methyl methacrylate end groups were prepared by cationic ring‐opening polymerization of 1,3‐dioxolane (DXL), in the presence of methacrylic anhydride, catalyzed by Maghnite‐H⁺ (Mag‐H⁺), in bulk and in solution. Maghnite is a montmorillonite sheet silicate clay, which exchanged with protons to produce Mag‐H⁺. The influence of the amount of Mag‐H⁺, monomer (DXL), and methacrylic anhydride on monomer conversion was studied. The polymerization yield and the molecular weight of α,ω‐bis‐unsaturated PDXLs prepared depend on the amount of Mag‐H⁺ used and the reaction time. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Maghnite‐H+, a solid catalyst for the cationic polymerization of α‐methylstyrene

The polymerization of α‐methylstyrene (AMS) catalyzed by Maghnite‐H⁺ (Mag‐H) was investigated. Mag‐H is a montmorillonite sheet silicate clay, exchanged with protons. It was found that the cationic polymerization of AMS is initiated by Mag‐H at ambient temperature in bulk and in solution. The effect of the amount of Mag‐H, the temperature, and the solvent was studied. The polymerization rate increased with increase in the temperature and the proportion of catalyst, and it was larger in nonpolar solvents. These results indicated the cationic nature of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from Mag‐H. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ring‐opening bulk polymerization of five‐ and six‐membered cyclic phosphonates using maghnite,a nontoxic proton exchanged montmorillonite clay

A new method of preparation of poly(alkylene H‐phosphonate)s by ring‐opening bulk polymerization of the five‐ and six‐membered cyclic phosphonates monomers using the nontoxic Maghnite‐H⁺ as the initiator is described. Cyclic phosphonate monomers have been first synthesized. In particular, a new one‐step synthesis of 2‐hydro‐2‐oxo‐1,3,2‐dioxaphospholane is reported with a yield of 70%. The efficiency of the montmorillonite sheet silicate clay which exchanged with protons, called Maghnite‐H⁺, as cationic initiator has been proved and the resulting biomimetic poly(alkylene H‐phosphonate)s have been characterized. The Maghnite‐H⁺ regenerated after one turn‐over has showed to be still efficient as initiator for the ring‐opening polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,cationic polymerization and curing reaction with epoxy resin of 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane

A new spiro ortho carbonate, 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane was prepared by the reaction of 2‐methoxybenzyl‐1,3‐propanediol with di(n‐butyl)tin oxide, following with carbon disulfide. Its cationic polymerization was carried out in dichloromethane using BF₃‐OEt₂ as catalyst. The [¹H], [¹³C]NMR and IR data as well as elementary analysis of the polymers obtained indicated that it underwent double ring‐opening polymerization. The polymerization mechanism is discussed. The curing reaction of bisphenol A type epoxy resin in the presence of the monomer and a curing agent was investigated. DSC measurements were used to follow the curing process. In the case of boron trifluoride‐o‐phenylenediamine (BF₃‐OPDA) as curing agent, two peaks were found on the DSC curves, one of which was attributed to the polymerization of the epoxy group, and the other to the copolymerization of the monomer with the isolated epoxy groups or homopolymerization. However, when BF₃‐H₂NEt was used as curing agent, only one peak was present. IR measurement of the modified epoxy resin with various weight ratios of epoxy resin/monomer was performed in the presence of BF₃‐H₂NEt as curing agent. The results demonstrate that the conversion of epoxy group increases as the content of monomer increases. The curing process and the structure of the epoxy resin network are discussed. © 2000 Society of Chemical Industry     

Polymerization of cyclic monomers. VII. Synthesis and radical polymerization of 1,3‐bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes

1,3‐Bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes 1 [RO: CH₃O (a), C₂H₅O (b)] were synthesized by the esterification of the corresponding 1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐carboxylic acids with resorcinol. The structure of the new vinylcyclopropanes was confirmed by elemental analysis and infrared (IR), ¹H nuclear magnetic resonance (¹H‐NMR), and ¹³C nuclear magnetic resonance (¹³C‐NMR) spectroscopy. The radical polymerization of difunctional 2‐vinyl‐cyclopropanes in bulk with 2,2′‐azoisobutyronitrile (AIBN) results in hard, transparent, crosslinked polymers. During the bulk polymerization of the crystalline bis[(1‐methoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzene 1a, an expansion in volume of about 1% took place. The radical solution polymerization of 1a resulted in a soluble polymer with pendant 2‐vinylcyclopropane groups. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1775–1782, 1999     

Maghnite‐H+ as a cationic catalyst in the synthesis of poly(1,3‐dioxolane) and α,ω‐methacryloyloxy‐poly(1,3‐dioxolane)

The polymerization of 1,3‐dioxolane catalyzed by Maghnite‐H^+; (Mag‐H⁺), a montmorillonite sheet silicate clay exchanged with protons, was investigated. The cationic ring‐opening polymerization of 1,3‐dioxolane was initiated by Mag‐H⁺ at different temperatures (20, 30, 50, and 70°C) in bulk and in a solvent (dichloromethane). The effects of the amount of Mag‐H⁺ and the temperature were studied. The polymerization rate and the average molecular weights increased with an increase in the temperature and the proportion of the catalyst. These results indicated the cationic nature of the polymerization and suggested that the polymerization was initiated by proton addition to the monomer from Mag‐H⁺. Moreover, we used a simple method, in one step in bulk and in solution at room temperature (20°C), to prepare a telechelic bismacromonomer: α,ω‐bisunsaturated poly(1,3‐dioxolane). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 78–82, 2006     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Synthesis and characterization of water soluble poly(N‐acetyl)iminoethylene and poly(ethyleneimine) by ion‐exchanged clay montmorillonite

The cationic polymerization of 2‐méthyl‐2‐oxazoline was carried out at 0°C in acetonitrile using an acid‐exchanged montmorillonite as acid solid ecocatalyst (Maghnite‐H⁺). The effect of the amount of catalyst, solvent, and times of polymerization on yield and viscosity of polymer was studied. A typical reaction product (PMOX) was analyzed by infrared and nuclear magnetic resonance spectroscopy as well as by gel‐permeation chromatography and MALDI‐TOF MS. The polymers presented similar spectrometric results and narrow molecular weight distribution. The poly(N‐acetyl)iminoethylene was hydrolyzed in acid medium obtaining a linear poly(ethyleneimine). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3741–3750, 2006     

Synthesis of copolymer from 1,3,5‐trioxane and 1,3‐dioxolane catalyzed by Maghnite‐H+

Copolymers (polyoxymethylene) were prepared by cationic copolymerization of 1,3,5‐trioxane (TOX) with 1,3‐dioxolane (DOX) in the presence of Maghnite‐H⁺ (Mag‐H⁺) in solution. Maghnite is a Montmorillonite sheet silicate clay, with exchanged protons to produce Mag‐H⁺. Various techniques, including ¹H‐NMR, ¹³C‐NMR, FT‐IR spectroscopy, and Ubbelohde viscometer were used to elucidate structural characteristics properties of the resulting copolymers. The influence of the amount of catalyst, of dioxolane (DOX), temperature, solvent, and time of copolymerization on yield and on intrinsic viscosity of copolymers was studied. The yield of copolymerization depends on the amount of Mag‐H⁺ used and the reaction time. We also propose mechanisms involved in the synthesis of copolymer (polyoxymethylene). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Cationic polymerization of ethylene oxide with Maghnite‐H as a clay catalyst in the presence of ethylene glycol

The activated‐monomer cationic ring‐opening polymerization of ethylene oxide, initiated with ethylene glycol and using an acid‐exchanged montmorillonite clay called Maghnite‐H⁺ as an effective catalyst, was carried out to obtain the corresponding homopolymers with narrow polydispersity ratios. The molecular weights of the obtained polymers were controlled with the feed ratio of the monomer to the initiator. The effects of the amount of the catalyst and time on the polymerization yield and viscosity of the polymers were studied. The structure was confirmed with proton nuclear magnetic resonance and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ring‐opening polymerization of styrene oxide with Maghnite‐H+ as ecocatalyst

The polymerization of styrene oxide was carried out at 20°C in chloroform with an acid‐exchanged montmorillonite as acid solid ecocatalyst (Mag‐H⁺). The effect of the amount of catalyst, solvent, and concentration of monomer on yield and molecular weight of polymer was studied. A typical reaction product (PSTO) was analyzed by infrared and nuclear magnetic resonance spectroscopy, as well as by gel‐permeation chromatography and MALDI‐TOFMS. The mechanism of the polymerization appears to be cationic. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1681–1687, 2006     

Synthesis of well‐defined comblike hydroxy‐functionalized atactic polystyrene promoted by metallocene/tin/poly(phenyl glycidyl ether)‐co‐formaldehyde

Well‐defined comblike atactic polystyrene functionalized with hydroxyl groups was synthesized via living/controlling radical polymerization promoted by metallocene complexes in the presence of poly(phenyl glycidyl ether)‐co‐formaldehyde as the initiator and Sn as a reducing agent. The effect of the polymerization conditions, such as the ratio of initiator to monomer, temperature, and polymerization time, and the structure of the metallocene complex on the polymerization process were investigated. The resulting polymers were characterized by gel permeation chromatography, multiangle laser light scattering, ¹H‐NMR, and ¹³C‐NMR. The results show that the polymer had a narrow molecular weight distribution in the range 1.1–1.4 and the number‐average molecular weight of the polymer linearly depended on the monomer conversion within the polymerization timescale, which confirmed that living radical polymerization characteristics prevailed in the polymerization process. Both the number of arms and the number of hydroxyl groups in each polymer molecule were about four, which suggested that they arose from the epoxy functional groups of the initiator. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of polymer from bis‐3,4‐ethylenedioxythiophene substituted acenaphthenequinoxaline

A new electrochoromic polymer poly(8,11‐bis(3,4‐ethylenedioxy thiophen‐2‐yl)acenaphtho[1,2‐b]‐quinoxaline) (PBEAQ) was synthesized by electrochemical polymerization of the corresponding monomer (BEAQ) in a 0.1 M tetraethylammonium tetrafluoroborate (TEABF₄) dichloromethane–acetonitrile (2 : 1, v : v) solution. The monomer and polymer were characterized by elemental analysis, ¹H‐NMR, IR, and UV‐vis spectroscopy. The electrochemical and optical properties of polymer were investigated by cyclic voltammetry and UV‐vis spectroscopy. Cyclic voltammetry and spectroelectrochemistry studies demonstrated that the polymer can be reversibly reduced and oxidized (both n‐ and p‐doped) between ?2 V and +1.5 V vs. Ag/Ag⁺. The polymer had a transmissive light blue color in the oxidized state and reddish color in the reduced state. Undoped polymer shows UV‐vis absorption peaks at 615 nm in solution, 650 nm in solid state, and has an optical band gap of 1.5 eV. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(1‐octene) synthesis using high performance supported titanium catalysts

Poly(1‐octene) was synthesized by polymerization of 1‐octene using high performance MgCl₂‐supported TiCl₄ in combination with triethyl aluminum (TEAl) as cocatalyst in n‐hexane for 2 h. Two catalysts, C₁ (diester catalyst) having di‐isobutyl phthalate as internal donor and C₂ (monoester catalyst) having ethyl benzoate as internal donor were utilized for the atmospheric polymerizations to evaluate the influence of structurally different internal donors on the productivity, rate of polymerization and molecular weight profiles. The kinetic profile assessed in terms of variation of reaction parameters like temperature, cocatalyst to catalyst molar ratio and monomer concentration was found to be dependent on them. From these kinetic analyses, optimize conditions for polymerizations of 1‐octene using diester as well as monoester catalyst were elucidated. The difference in the performance of diester and monoester catalyst system can be explained in terms of stability of active titanium species and chain transfer process. NMR spectroscopy of synthesized poly(1‐octene) indicate predominantly isotactic nature. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane (MTN) has been achieved with tert‐butyl perbenzoate (TBPB) as initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical (TEMPO) at 125 °C. The molecular weight polydispersity of the polymers is obviously lower than that of polymers obtained by conventional procedures. As the [TEMPO]/[TBPB] molar ratio increased, the polydispersity decreased and a polydisperty as low as 1.2 was obtained at high TEMPO concentration. With the conversion of the monomer increasing, the molecular weight of the polymers turned higher and a linear relationship between the M_w and the monomer conversion was observed. The monomer conversion, however, did not exceed 30 %. © 2000 Society of Chemical Industry     

Synthesis of hydrosoluble polymers of oxazoline using Maghnite‐H as catalyst

2,4,4‐Triméthyl‐2‐oxazoline was polymerized, using an acid exchanged montmorillonite clay as catalyst, with the aim to study the influence of the methyl group size in the initiation and propagation processes. The effect of amount of catalyst temperature, time, and solvent on the polymerization yield and viscosity of the polymers were studied. The polymers obtained were characterized by spectrometric methods and their average molecular weights were determined by viscosimetrie and GPC data. The polymers presented similar spectrometric results and narrow molecular weight distributions. The kinetics indicated that the polymerization rate is first order with respect to monomer concentration. The polymerization results showed that the methyl groups present in the monomer affected the initiation process. Mechanism studies showed that polymerization of TMOX involves nucleophilic ring opening by attack of nitrogen to cleave the CH₂? O bond of the oxazoline ring. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1792–1800, 2007     

Zinc‐based catalyst for the ring‐opening polymerization of cyclic esters

A zinc‐based catalyst zinc bis[bis(trimethylsilyl)amide] was used for the polymerization of cyclic esters including L ‐lactide (L ‐LA) and 2‐methyl‐2‐carboxyl‐propylene carbonate (MBC). The polymerization of L ‐lactide in THF could be carried out successfully under mild conditions in very short time by using the zinc catalyst and alcohols as the initiators. Kinetic study in solution polymerization prooved the polymerization has high monomer conversion degree close to 100% and the molecular weight of the resulting polyester has linear increase with the increase of [M]₀ /[I] (molar ratio of monomer to initiator). Sequential polymerization of L ‐LA and MBC in THF also showed high MBC conversion of 94% with a narrow molecualr weight maintained, indicating a living nature of this polymerization. The zinc catalyst system has also been used for the L ‐LA bulk polymerization with a high monomer conversion. ¹³C NMR indicated the polymer possesses high regioregularity and the minor regioirregular component was owing to the D ‐LA in the monomer inserted into the polymer mainchain during the transesterifcation. Interaction between monomer and zinc catalyst has been found to be a key factor to sustain a homogenous solution during the initiating procedure. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

One‐step synthesis of triarm block copolymers via simultaneous reversible‐addition fragmentation chain transfer and ring‐opening polymerization

One‐step synthesis of star copolymers by reversible addition–fragmentation chain transfer (RAFT) and ring‐opening polymerization (ROP) by using a novel dual initiator is reported. Triarm block copolymers comprising one polystyrene (or polyacrylamide) arm and two poly(β‐butyrolactone) arms were synthesized in one‐step by simultaneous RAFT polymerization of styrene (St) (or acrylamide, designated as AAm) and ROP of β‐butyrolactone (BL) in the presence of a novel trifunctional initiator, 1,2‐propanediol ethyl xanthogenate (RAFT‐ROP agent). This dual initiator was obtained through the reaction of 3‐chloro‐1,2‐propanediol with the potassium salt of ethyl xanthogenate. The principal parameters such as monomer concentration, initiator concentration, and polymerization time that affect the one‐step polymerization reaction were evaluated. The characterization of the products was achieved using Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H‐NMR), ¹³C‐nuclear magnetic resonance (¹³C‐NMR), Gas chromatography–mass spectrometry (GC–MS), gel‐permeation chromatography (GPC), thermogravimetric analysis (TGA), and fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fe‐mediated ARGET atom transfer radical polymerization of methyl methacrylate in ionic liquid‐based microemulsion

Poly(methyl methacrylate) (PMMA) was synthesized by activator regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP) of MMA in ionic liquid‐based microemulsion with polyoxyethylene sorbitan monooleate (Tween 80) as surfactant. The polymerization was carried out at 25°C with CCl₄ as initiator, FeCl₃·6H₂O/N,N,N′,N′‐tetramethyl‐1,2‐ethanediamine (TMEDA) as catalyst complex in the presence of reducing agent ascorbic acid (VC). The polymerization kinetics showed the feature of controlled/″living″ process as evidenced by a linear first‐order plot. The well‐controlled polymers were obtained with narrow polydispersity indices and the ionic liquid‐based microemulsions were transparent with a particle size less than 30 nm. The obtained polymer was characterized by ¹H NMR and gel permeation chromatography. The chain extension was successfully achieved by the obtained PMMA macroinitiator/FeCl₃·6H₂O/TMEDA/VC initiator system based on ARGET ATRP method. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013