Swelling behavior of novel protein‐based superabsorbent nanocomposite

A novel superabsorbent nanocomposite based on hydrolyzed collagen was synthesized by simultaneously graft copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) and acrylamide (AAm). Sodium montmorilonite (Na‐MMt) was used as clay. Methylenebisacrylamide (MBA) and ammonium persulfate (APS) were used as crosslinker and initiator, respectively. The effect of reaction variables such as nanoclay content, MBA and APS concentrations as well as the AMPS/AAm weight ratio on the water absorbency of nanocomposites was investigated. Although the water absorbency was decreased by increasing of MBA concentration, an optimum swelling capacity was achieved for clay, APS, and AMPS/AAm variables. The structure of nanocomposite was identified using FTIR spectroscopy, XRD patterns, and scanning electron microscopy graphs. The effect of swelling media comprising various dissolved salts and different pHs was studied. Also, water retention capacity was studied, and the results showed that inclusion of Na‐MMt nanoclay causes an increase in water retention under heating. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Chitosan‐modified nanoclay–poly(AMPS) nanocomposite hydrogels with improved gel strength

BACKGROUND: Making (nano)composite structures is one of the efficient approaches for strengthening hydrogels extended in recent years. The present paper deals with the synthesis and properties of novel nanocomposite hydrogels based on 2‐acrylamido‐2‐methylpropane‐1‐sulfonic acid (AMPS). Initially, a bio‐modified clay, chitosan‐intercalated montmorillonite (chitoMMT), was prepared. Then, this was incorporated into the polymerization of AMPS in the presence of a macro‐crosslinker, i.e. poly(ethylene glycol) dimethacrylate, to yield super‐swelling nanocomposite hydrogels. The swelling capacity as well as some structural, rheological and thermomechanical properties of the hydrogels were studied and compared with those of the clay‐free counterpart. RESULTS: ChitoMMT exhibited no toxicity, which was confirmed using cell‐culture testing. A chitoMMT content of ca 6% was found to be the most favourable content of the bio‐modified clay for achieving a product with improved properties (i.e. the highest gel content, the highest gel strength and optimal thermal stability). Based on a dynamic mechanical thermal analysis study, an increased glass transition temperature (98.2 °C) and improved rubbery modulus (up to 238% higher than that of the clay‐free counterpart) were recorded. Thermogravimetric analysis verified that the thermal stability of nanocomposite samples was higher than that of clay‐free samples. CONCLUSION: Owing to the non‐toxicity of the incorporated chitoMMT, the strengthened hydrogels may be considered as potential candidates for bio‐applications. Copyright © 2009 Society of Chemical Industry     

Effect of sodium montmorillonite nanoclay on the water absorbency and cationic dye removal of carrageenan-based nanocomposite superabsorbents

Nanocomposite superabsorbents were synthesized by simultaneously solution copolymerization of acrylamide (AAm) and sodium acrylate (Na-AA) in the presence of carrageenan biopolymer and sodium montmorillonite (Na-MMt) nanoclay. Potassium persulfate (KPS) and methylenebisacrylamide (MBA) were used as initiator and crosslinker, respectively. The structure and morphology of the nanocomposites were investigated using XRD, FTIR, scanning electron microscopy (SEM), and TEM techniques. The influence of nanoclay and carrageenan contents as well as monomer weight ratios on the degree of swelling of nanocomposites was studied. The optimum water absorbency was obtained at 10 wt% of clay, 10 wt% of carrageenan, and 1:1 of monomers weight ratio. The obtained nanocomposites were examined to remove of crystal violet (CV) cationic dye from water. The effect of carrageenan and clay content on the speed of dye adsorption revealed that while the rate of dye adsorption is enhanced by increasing the clay content up to 14 wt% of clay, it was decreased as the carrageenan increased in nanocomposite composition. The results showed that the pseudo-second-order adsorption kinetic was predominated for the adsorption of CV onto nanocomposites. The experimental equilibrated adsorption capacity of nanocomposites was analyzed using Freundlich and Langmuir isotherm models. The results corroborated that the experimental data fit the Freundlich isotherm the best.     

Carrageenan‐g‐poly(acrylamide)/poly(vinylsulfonic acid,sodium salt) as a novel semi‐IPN hydrogel: Synthesis,characterization, and swelling behavior

A semi‐interpenetrating polymer network (semi‐IPN) hydrogel based on kappa‐carrageenan (κC) and poly (vinylsulfonic acid, sodium salt) (PVSA) was prepared by graft copolymerization of acrylamide (AAm) using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. FTIR spectroscopy was used for confirming the structure of the final product. It was found that the chemical composition of the Semi‐IPN hydrogel is equal to the initial homopolymers and monomer feed compositions. The swelling capacity of the hydrogel was shown to be affected by the MBA, APS, and AAm concentration as well as κC/PVSA weight ratio. The swelling behavior of the hydrogel was also investigated in various pHs and salt solutions. Since the highly swelling biopolymer‐based hydrogel exhibits low salt‐sensitivity, it may be referred to as an anti‐salt superabsorbent hydrogel. The swelling kinetics of the superabsorbent hydrogels was studied as well. POLYM. ENG. SCI., 47:1388–1395, 2007. © 2007 Society of Plastics Engineers     

Swelling properties of CMC‐g‐poly (AAm‐co‐AMPS) superabsorbent hydrogel

A series of biopolymer‐based superabsorbent hydrogels based on carboxymethyl cellulose has been prepared by free‐radical graft copolymerization of acrylamide and 2‐acrylamido‐2‐methylpropan sulfonic acid (AMPS) in aqueous solution using methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator. The effect of variables on the swelling capacity such as: acrylamide/AMPS weight ratio, reaction temperature, and concentration of the initiator and crosslinker were systematically optimized. The results indicated that with increasing the amount of AMPS, the swelling capacity is increased. FT‐IR spectroscopy and scanning electron microscope analysis were used to confirm the hydrogel structure. Swelling measurements of the synthesized hydrogels in different salt solutions indicated considerable swelling capacity. The absorbency under load of the superabsorbent hydrogels was determined by using an absorbency under load tester at various applied pressures. A preliminary swelling and deswelling behaviors of the hydrogels were also studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Chitosan modified MMT‐poly(AMPS) nanocomposite hydrogel: Heating effect on swelling and rheological behavior

Vulnerability of hydrogels against thermal circumstances may be substantially eliminated via incorporating nanoclay to prepare nanocomposite hydrogels. In this research, chitosan‐intercalated montmorillonite (ChitoMMT) was used as a bionanoclay to yield novel nanocomposite hydrogels based on 2‐acrylamido‐2‐methylpropanesulfonic acid. The bionanoclay is suitable especially for preparing biomaterials used in biomedical, food, and pharmaceutical applications, unlike conventional commercial nanoclays (alkyl ammonium‐intercalated MMT) which are not appropriate for bio‐applications due to toxicity of the intercalant particularly where the clay content is high. Two different crosslinkers (i.e., methylene bisacrylamide, and polyethyleneglycol dimethacrylate) were employed to synthesize the nanocomposites. The variations in swelling, rheological and thermal properties of the hydrogels were essentially attributed to thermally induced crosslink cleavage/formation depending upon the crosslinker nature. The nanocomposites comprised superior thermal properties in comparison with the clay‐free hydrogel counterpart. They can preserve substantially their swelling ability for longer heating periods. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Hydrogel‐forming agar‐graft‐PVP and κ‐carrageenan‐graft‐PVP blends: Rapid synthesis and characterization

Grafting of agar and κ‐carrageenan with polyvinylpyrrolidone (PVP, average molecular weight 10,000 D) in an aqueous medium at a pH of about 7 produced agar‐graft‐PVP and κ‐carrageenan‐graft‐PVP blends capable of forming hydrogels. The reaction was carried out with microwave irradiation in the presence of a water‐soluble initiator, potassium persulfate. Optimum microwave irradiation conditions for obtaining hydrogels of the grafted products were achieved. The structural characteristics and thermal stability of the grafted blends were studied by Fourier transform infrared, ¹³C‐NMR, and thermogravimetric analyses. Appearance of new IR bands at 1661, 1465, and 1426 cm^?1 in the grafted products indicated the insertion of PVP into the polysaccharide structure. Powder X‐ray diffraction studies revealed the enhanced crystallinity in the products compared to in the control polysaccharides as well as PVP. Agar and κ‐carrageenan were grafted to a considerable degree, with 62.5 E % and 125 G % for agar‐graft‐PVP and 65.5 E % and 131 G % for κ‐carrageenan‐graft‐PVP. Optical micrographs of the grafted blends indicated considerable changes in the morphology of the agar and the κ‐carrageenan, substantiating the X‐ray diffraction data. A plausible mechanism for the crosslinking of PVP to agar and κ‐carrageenan is proposed. These hydrogels exhibited enhanced water‐holding capacity despite weaker gel strength than that in the respective control polysaccharides. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3654–3663, 2006     

New smart carrageenan‐based superabsorbent hydrogel hybrid: Investigation of swelling rate and environmental responsiveness

Synthesis of novel natural‐based superabsorbents with improved properties is of prime importance in many applications. In this article we report an efficient synthesis of new polysaccharide‐based superabsorbent hybrid composing carrageenan, acrylic acid, sodium acrylate, and 2‐hydroxyethyl acrylate through homogenous solution polymerization process. Infrared spectroscopy and thermogravimetric analysis (TGA) were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy (SEM). To deeper studies on the structure‐property relation in SAP hydrogels, three hydrogels with different acrylic acid/2‐hydroxyethyl acrylate (AA/HEA) weight ratios were synthesized and swelling capacity in various media was assessed. The hydrogel hybrid was also tested to be swollen and deswollen alternatively in 0.01 and 0.1 M sodium chloride solution. Moreover, the swelling‐deswelling capability of the hydrogel in alternatively changed methanol‐water mixtures was studied. Additionally, the swelling kinetics of the synthesized hydrogels were examined. The absorbency under load (AUL) of hydrogel was also investigated by using an AUL tester at various applied pressures. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Waste polystyrene foam‐graft‐acrylic acid/montmorillonite superabsorbent nanocomposite

A novel superabsorbent nanocomposite based on partially neutralized acrylic acid, waste polystyrene foam, and sodium type montmorillonite (Na‐MMT) powder was synthesized through emulsion polymerization using N, N′‐methylenebisacrylamide as a crosslinker, 2,2′‐azo‐bisiso‐butyronitrile, ammonium persulfate, and sodium sulfite as mixed redox initiators. The effects of such factors as amount of Na‐MMT, crosslinker, initiator, and neutralization degree on water absorbency of the superabsorbent were investigated. The composites were characterized by Fourier transform infrared spectroscope, X‐ray diffraction, thermo gravimetric analysis, and scanning electron microscope. The results show that acrylic acid monomer successfully grafted onto the polystyrene chain, the layers of Na‐MMT were exfoliated and dispersed in the composite at nano size after copolymerization. The introduction of waste polystyrene foam in the composite increased the water absorbency rate. The addition of Na‐MMT not only enhanced the thermal stability of the composites but also increased its water absorbency, and the optimal water absorbencies of distilled water and saline water (w_NaCl = 0.9%) of the nanocomposites were more than 1180 g H₂O/g and 72.6 g H₂O/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2341–2349, 2007     

Porous Carrageenan-<Emphasis Type="Italic">g</Emphasis>-polyacrylamide/bentonite superabsorbent composites: swelling and dye adsorption behavior

A novel superabsorbent composite based on kappa-Carrageenan (κC) was prepared by graft copolymerization of acrylamide (AAm) onto κC in the presence of bentonite powder using methylenebisacrylamide (MBA) as a crosslinking agent, ammonium persulfate (APS) as an initiator, and sodium carbonate as a pore-forming agent. The swelling behavior in distilled water and in solutions with different pH values was investigated. The results indicated that with increasing carrageenan/bentonite weight ratio, the swelling capacity is increased but the gel content is decreased. The swelling rate of the hydrogels was improved by introducing sodium carbonate as pore-forming agent. The prepared superadsorbent composites were used as adsorbent for a cationic dye, methylene blue. Isotherm of adsorption and the effect of pH, adsorption dosage, contact time and initial dye concentration on dye adsorption were also studied. The results showed that maximum adsorption capacity of methylene blue on the prepared adsorbents is 156.25 mg g^?1 and adsorption is well-described by Langmuir isotherm model.     

Mechanical properties of polystyrene‐montmorillonite nanocomposites—Prepared by melt intercalation

A series of polymer‐clay nanocomposite (PCN) materials, consisting of thermoplastic polystyrene (PS) sample and dispersing inorganic organoclay platelets, were successfully prepared. First, organoclay was prepared by performing cationic exchange reactions between the sodium ions existing in the interlayer region of the clay mineral and intercalation agent, followed by dispersing the organophilic clay into a PS basis through the melt intercalation approach performed by a twin‐screw mixing method. The as‐prepared PCN materials in the form of a pellet subsequently characterized using the powder X‐ray diffraction (XRD) and the transmission electron microscopy (TEM). In this study, it is found that the wear resistance of PS to be effectively enhanced by the incorporation of low loading organophilic clay platelets. The surface morphological image for the neat PS and PS‐clay after a wear resistance test has also been compared and identified by the scanning electron microscopy (SEM). Furthermore, the effect of organoclay on three other different measurement types of mechanical properties for as‐prepared PCN materials, e.g., flexural tests, impact tests, and micron‐nano indenter tests were performed and compared. Generally, PCN materials exhibited an obvious enhancement of mechanical properties of neat polymer by an incorporated low loading of organophilic clay platelets into a polystyrene matrix used for the evaluation of mechanical properties as‐prepared samples. For example, mechanical strength (excepting flexural strength) almost remain same beyond 3 wt % clay loading in PS, whereas much detrimental effect being observed in the wear loss in case of PCNs with 5 wt % clay than 3 wt %. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Multi‐responsive hydrogels based on N‐isopropylacrylamide and sodium alginate

Hydrogels consisting of sodium alginate and N‐isopropylacrylamide covalently crosslinked with N,N′‐methylenebisacrylamide were prepared. The mixed‐interpenetrated networks obtained were characterized using elemental analysis, Fourier transform infrared and Raman spectroscopy, swelling measurements and environmental scanning electron microscopy. The thermo‐ and pH‐responsive properties of these hydrogels were evidenced by their swelling behaviour, which depended also on the amount of crosslinking agent and hydrogel composition. Copyright © 2010 Society of Chemical Industry     

Design and development of temperature sensitive porous poly(NIPAAm‐AMPS) hydrogels for drug release of doxorubicin‐a cancer chemotherapy drug

Temperature sensitive polymer network porous hydrogels were developed with N‐Isopropylacrylamide (NIPAAm) and AMPS (2‐acrylamido‐2‐methyl‐1‐propanesulfonicacid), as well as with sucrose as porogen by crosslinking with hydrophilic crosslinker N,N¹‐methylenebisacrylamide (MBA). The temperature responsive behaviour, the swelling/deswelling kinetics of the hydrogels were investigated. The structural and morphological characterizations of the developed hydrogels were obtained from FTIR spectroscopy and scanning electron microscopy (SEM). The increment in the lower critical solution temperature (LCST) of NIPAAm hydrogels can be done with the help of AMPS and it is confirmed with differential scanning calorimetry (DSC) as well as temperature dependent swelling curves. The model cancer chemotherapy drug Doxorubicin (Dox) was loaded into theses hydrogels and the release studies as well as the released profiles of the drug showed that more than 8–54% of the loaded drug was released in the first half‐an‐hour at a buffer solution of 7.4 and the rest of the drug was released slowly. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Quantification of surface forces of thermoplastic elastomeric nanocomposites based on poly(styrene‐ethylene‐co‐butylene‐styrene) and clay by atomic force microscopy

Atomic force microscopy was used for qualitative phase morphological mapping as well as quantitative investigation of surface forces measured at constituting blocks and clay regions of a thermoplastic elastomeric nanocomposite based on triblock copolymer: poly(styrene‐ethylene‐co‐butylene‐styrene) (SEBS) and organically modified nano‐clay. The roughness and power spectral density analyses of surface topography provided the increment in random roughness of the nanocomposite surface compared to pristine SEBS surface. The same surfaces were examined by means of single point force‐distance, and force‐volume measurements. Large adhesive force of 25 nN and contact force of 260 nN were found in soft polyethylene (PEB) segments and higher cantilever deflection of 210 nm was found for clay regions of SEBS‐clay nanocomposite. Mapping of elastic modulus of the glassy and rubbery blocks and clay regions was probed by employing Hertzian and JKR model from respective approaching and retracting parts of force‐distance curves. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and swelling behavior of macroporous poly(acrylamide‐co‐sodium methacrylate) superabsorbent hydrogels

Macroporous superabsorbent hydrogels (SAHs) composed of acrylamide (AAm) and sodium methacrylate (NMA) were prepared by aqueous solution polymerization in the presence of a glucose solution. Their swelling capacity was investigated as a function of the concentrations of the glucose solution, sodium methacrylate, crosslinker, initiator, and activator. The porosity of the poly(acrylamide‐co‐sodium methacrylate) superabsorbent hydrogels was confirmed using scanning electron microscopy. The SAHs were characterized by IR spectroscopy. To estimate the effect on the swelling behavior, three types of crosslinkers were employed: N,N′‐methylenebisacrylamide, 1,4‐butanediol diacrylate, and diallyl phthalate. Network structural parameters such as initial swelling rate, swelling rate constant, and maximum equilibrium swelling were evaluated by water absorption measurement. The equilibrium water content (EWC%) of the AAm–NMA macroporous SAHs was found to be in the range of 93.31–99.68, indicating that these SAHs may have applications as biomaterials in the medicinal, pharmaceutical, and veterinary fields. Most of the SAHs prepared in this investigation followed non‐Fickian‐type diffusion, and few followed a case II– or super–case II‐type diffusion. The diffusion coefficients of these macroporous SAHs were investigated. Further, the swelling behavior of these SAHs also was investigated at different pHs and in different salt solutions and simulated biological fluids. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3202–3214, 2006     

Synthesis and characterization of in situ sodium‐activated and organomodified bentonite clay/styrene–butadiene rubber nanocomposites by a latex blending technique

In this article, we describe a method used to prepare an in situ sodium‐activated, organomodified bentonite clay/styrene–butadiene rubber nanocomposite master batch via a latex blending technique. The clay master batch was used for compound formulation. Octadecyl amine was used as an organic intercalate. The clay was purchased from local suppliers and was very cheap. Sodium chloride was used for in situ activation of the clay. The wide‐angle X‐ray diffraction data indicated that the in situ sodium activation helped to increase the intergallery distance from 1.28 to 1.88 nm. A transmission electron micrograph indicated intercalation and partial exfoliation. The thermal properties were relatively better in the case of the sodium‐activated, organomodified bentonite‐clay‐containing compound. A substantial improvement in physical properties such as the modulus, tensile strength, tear strength, and elongation at break was observed in the case of the in situ sodium‐activated compound. A cation‐exchange capacity equivalent (of the clay) of 1.5 times the octadecyl amine was the optimum dose for the modification. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Adsorption capacity,kinetics, and mechanism of copper(II) uptake on gelatin‐based hydrogels

Gelatin‐based hydrogels were synthesized and characterized for use as Cu²⁺‐ion sorbents. Gelatin was crosslinked in the presence of two different monomers, that is, acrylamide (AAm) and/or 2‐hydroxypropyl methacrylate, with N,N‐methylenebisacrylamide, ammonium persulfate, and sodium bicarbonate. The as‐prepared hydrogels were further characterized by scanning electron microscopy, Fourier transform spectroscopy, and the study of their swelling behavior as a function of temperature, time, and pH to evaluate their structure–property relationships. The hydrogels were observed to be good sorbents of Cu²⁺, and a maximum uptake of 84.8% was observed within 2 h at 37°C and with 10 ppm of the Cu²⁺‐ion solution for the gelatin and polyacrylamide hydrogel, which also exhibited the maximum retention capacity at 14.9 mg/g after four feeds. All of the experimental data exhibited good matches with the Langmuir isotherm and followed pseudo‐second‐order kinetics. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of bentonite on the physical properties and drug‐release behavior of poly(AA‐co‐PEGMEA)/bentonite nanocomposite hydrogels for mucoadhesive

A series of nanocomposite hydrogels for mucoadhesive were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and intercalated bentonite clay by photopolymerization. The microstructures were identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase of bentonite, whereas the gel strength and Young's modulus of the present gels increased with an increase of bentonite. However, the adhesive force of the present gels did not decrease with an increase of bentonite. XRD results indicated that the exfoliation of bentonite was achieved in the xerogels and swollen gels. Finally, the drug‐release behaviors for these gels were also assessed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2934–2941, 2004     

Novel carrageenan-based hydrogel nanocomposites containing laponite RD and their application to remove cationic dye

Novel hydrogel nanocomposites were synthesized by solution polymerization of acrylamide in the presence of carrageenan biopolymer and laponite RD clay. Laponite was used as an inorganic cross-linker. Ammonium persulfate was applied as an initiator. The structure and morphology of the nanocomposites were investigated using XRD, scanning electron microscopy, and transition electron microscopy techniques. The influence of both laponite nanoclay and the carrageenan content on the swelling degree of nanocomposites was studied and it was found that all nanocomposites containing carrageenan component have a high swelling degree compared to a nanocomposite without carrageenan. The obtained nanocomposites were examined to remove a cationic crystal violet (CV) dye from water. The effect of carrageenan and clay contents on the speed of dye adsorption revealed that while the rate of dye adsorption is enhanced by increasing the clay content, it was depressed as the carrageenan content increased in nanocomposite composition. The results showed that the pseudo-second-order adsorption kinetic was predominant in adsorption of CV onto nanocomposites. The experimental equilibrated adsorption capacity of nanocomposites was analyzed using Freundlich and Langmuir isotherm models. The results indicated that the experimental data fit the Langmuir isotherm best. Maximum adsorption capacity was obtained for carrageenan-free nanocomposite with 79.8?mg?g^?1 of adsorbed CV onto nanocomposite.     

Study of the effect of organic clay on the shear‐induced crystallization of high‐density polyethylene through dynamic‐packing injection molding

Organic nanoparticles as heterogeneous nucleators have a great effect on the crystallization of polymer matrices in nanocomposite systems, and the effect will be enhanced under shear flow. A home‐made dynamic‐packing injection molding (DPIM) device was developed to explore the effect of organic clay on the shear‐induced crystallization of high‐density polyethylene (HDPE). Differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and scanning electron microscopy (SEM) were used to characterize the flow‐induced crystalline structure of HDPE/clay nanocomposite injection moldings. It was found that higher crystallinity and thicker crystal planes which contribute to the improvement of mechanical properties were achieved in HDPE/clay nanocomposite samples prepared by DPIM. DSC results clearly showed that an increase of about 16% in crystallinity was achieved in dynamic HDPE/clay nanocomposite samples compared with traditional unfilled HDPE samples. WAXD confirmed that dynamic HDPE/clay nanocomposite samples had maximum crystal sizes at the (110) and (200) planes of 335 and 305 Å, respectively. SEM images indicated that the arrangement of crystalline structures in dynamic HDPE/clay samples was altered slightly compared with unfilled HDPE samples prepared using the same processing parameters. The results showed that organic clay was beneficial for increasing crystallinity and crystal size in the HDPE/clay nanocomposite system under shear flow. Meanwhile the arrangement of crystalline structures was insignificantly affected by the organic clay, and the preferred regular arrangement of lamellae could still be formed in the dynamic HDPE/clay nanocomposite system. Copyright © 2010 Society of Chemical Industry