Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

Competitive adsorption of Pb, Cu and Cd ions from aqueous solutions by multiwalled carbon nanotubes

The individual and competitive adsorption capacities of Pb²⁺, Cu²⁺ and Cd²⁺ by nitric acid treated multiwalled carbon nanotubes (CNTs) were studied. The maximum sorption capacities calculated by applying the Langmuir equation to single ion adsorption isotherms were 97.08 mg/g for Pb²⁺, 24.49 mg/g for Cu²⁺ and 10.86 mg/g for Cd²⁺ at an equilibrium concentration of 10 mg/l. The competitive adsorption studies showed that the affinity order of three metal ions adsorbed by CNTs is Pb²⁺>Cu²⁺>Cd²⁺. The Langmuir adsorption model can represent experimental data of Pb²⁺ and Cu²⁺ well, but does not provide a good fit for Cd²⁺ adsorption data. The effects of solution pH, ionic strength and CNT dosage on the competitive adsorption of Pb²⁺, Cu²⁺ and Cd²⁺ ions were investigated. The comparison of CNTs with other adsorbents suggests that CNTs have great potential applications in environmental protection regardless of their higher cost at present.     

Microwave preparation and adsorption properties of EDTA‐modified cross‐linked chitosan

A novel chitosan‐based adsorbent (CCTE) was synthesized by the reaction between epichlorohydrin O‐cross‐linked chitosan and EDTA dianhydride under microwave irradiation (MW). The chemical structure of this new polymer was characterized by infrared spectra analysis, thermogravimetric analysis, and X‐ray diffraction analysis. The results were in agreement with the expectations. The static adsorption properties of the polymer for Pb²⁺, Cu²⁺, Cd²⁺, Ni²⁺, and Co²⁺ were investigated. Experimental results demonstrated that the CCTE had higher adsorption capacity for the same metal ion than the parent chitosan and cross‐linked chitosan. In particular, the adsorption capacities for Pb²⁺ and Cd²⁺ were 1.28 mmol/g and 1.29 mmol/g, respectively, in contrast to only 0.372 mmol/g for Pb²⁺ and 0.503 mmol/g for Cd²⁺ on chitosan. Kinetic experiments indicated that the adsorption of CCTE for the above metal ions achieved the equilibrium within 4 h. The desorption efficiencies of the metal ions on CCTE were over 93%. Therefore, CCTE is an effective adsorbent for the removal and recovery of heavy metal ions from industrial waste solutions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Removal of heavy‐metal ions by magnetic beads containing triazole chelating groups

The aim of this study was to prepare magnetic beads that could be used for the removal of heavy‐metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [m‐poly(EGDMA–VTAZ)] beads were produced by suspension polymerization in the presence of a magnetite Fe₃O₄ nanopowder. The specific surface area of the m‐poly(EGDMA–VTAZ) beads was 74.8 m²/g with a diameter range of 150–200 μm, and the swelling ratio was 84%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA–VTAZ) beads was 14.8%. The maximum binding capacities of the m‐poly(EGDMA–VTAZ) beads from aquous solution were 284.3 mg/g for Hg²⁺, 193.8 mg/g for Pb²⁺, 151.5 mg/g for Cu²⁺, 128.1 mg/g for Cd²⁺, and 99.4 mg/g for Zn²⁺. The affinity order on a mass basis was Hg²⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺> Zn²⁺. The binding capacities from synthetic waste water were 178.1 mg/g for Hg²⁺, 132.4 mg/g for Pb²⁺, 83.5 mg/g for Cu²⁺, 54.1 mg/g for Cd²⁺, and 32.4 mg/g for Zn²⁺. The magnetic beads could be regenerated (up to ca. 97%) by a treatment with 0.1M HNO₃. These features make m‐poly(EGDMA–VTAZ) beads potential supports for heavy‐metal removal under a magnetic field. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of Zn2+‐chelated poly(HEMA‐MAH) cryogel for affinity purification of chicken egg lysozyme

Supermacroporous poly(2‐hydroxyethyl methacrylate) [poly(HEMA)]‐based monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with N‐methacryloyl‐L ‐histidine methyl ester (MAH) as functional comonomer and N,N′‐methylene‐bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for affinity purification of lysozyme from chicken egg white. The monolithic cryogel containing a continuous polymeric matrix having interconnected pores of 10–50 μm size was loaded with Zn²⁺ ions to form the metal chelate with poly(HEMA‐MAH) cryogel. Poly(HEMA‐MAH) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA‐MAH) monolithic cryogel was 5.62 g H₂O/g cryogel. Poly(HEMA‐MAH) cryogel containing 45.8 μmol MAH/g was used in the adsorption/desorption of lysozyme from aqueous solutions. The nonspecific adsorption of lysozyme was very low (7.5 mg/g). The maximum amount of lysozyme adsorption from aqueous solution in phosphate buffer was 209 mg/g at pH 7.0. It was observed that lysozyme could be repeatedly adsorbed and desorbed with the poly(HEMA‐MAH) cyogel without significant loss of adsorption capacity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.     

Dye‐affinity hollow‐fibres and their lysozyme adsorption–desorption characteristics

Dye‐affinity adsorption is increasingly used for protein separation. Hollow‐fibres have advantages as adsorbents in comparison to conventional bead supports because they are not compressible and can eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow‐fibres to which Reactive Green HE‐4BD was attached for adsorption of lysozyme. The hollow‐fibre was characterized by scanning electron microscopy. These dye‐carrying hollow‐fibres (26.3 µmol g^?1) were used in the lysozyme adsorption–elution studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached hollow‐fibres was studied in a batch system. The non‐specific adsorption of lysozyme on the polyamide hollow‐fibres was 1.8 mg g^?1. Reactive Green HE‐4BD attachment significantly increased the lysozyme adsorption up to 41.1 mg g^?1. Langmuir adsorption model was found to be applicable in interpreting lead adsorption by Reactive Green HE‐4BD attached hollow fibres. Significant amount of the adsorbed lysozyme (up to 95%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pH 8.0. In order to determine the effects of adsorption conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We concluded that polyamide dye‐affinity hollow‐fibres can be applied for lysozyme adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these dye‐attached hollow‐fibres are suitable for lysozyme adsorption. © 2001 Society of Chemical Industry     

Adsorption for metal ions of chitosan coated cotton fiber

A kind of adsorbent for metal ions, cotton fiber coated by high loading of chitosan (SCCH) was prepared. Its structure was characterized by elemental analysis, scanning electronic microscopy (SEM), Fourier transform infrared spectrum (FTIR), and wide‐angle X‐ray diffraction (WAXD). The adsorption properties of SCCH for Cu²⁺, Ni²⁺, Pb²⁺, Cd²⁺, such as saturated adsorption capacities, static kinetics, and isotherm were investigated. The adsorption for Ni²⁺, Pb²⁺, and Cd²⁺ was controlled by liquid film diffusion, but by particle diffusion for Cu²⁺. The adsorption process for Cu²⁺, Ni²⁺, Cd²⁺ could be described with Langmuir or Freundlich equation, but only with Freundlich equation for Pb²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dithiocarbamate functionalized Al(OH)3‐polyacrylamide adsorbent for rapid and efficient removal of Cu(II) and Pb(II)

Heavy metal ions such as Cu²⁺ and Pb²⁺ impose a significant risk to the environment and human health due to their high toxicity and non‐degradable characteristics. Herein, Al(OH)₃‐polyacrylamide chemically modified with dithiocarbamates (Al‐PAM‐DTCs) was synthesized using formaldehyde, diethylenetriamine, carbon disulfide, and sodium hydroxide for rapid and efficient removal of Cu²⁺ and Pb²⁺. The synthesized adsorbent was characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis, scanning electron microscopy–energy dispersive X‐ray spectroscopy analysis, and transmission electron microscope measurements. Al‐PAM‐DTCs showed rapid removal of Cu²⁺ (<30 min) and Pb²⁺ (<15 min) with high adsorption capacities of 416.959 mg/g and 892.505 mg/g for Cu²⁺ and Pb²⁺ respectively. Al‐PAM‐DTCs also had high capacities in removing suspended solids and metal ions simultaneously in turbid bauxite suspensions. FTIR, thermodynamic study, and elemental mapping were used to determine the adsorption mechanism. The rapid, convenient, and effective adsorption of Cu²⁺ and Pb²⁺ indicated that Al‐PAM‐DTCs has great potential for practical applications in purification of other heavy metal ions from aquatic systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45431.     

Antibody purification from human plasma by metal‐chelated affinity membranes

The aim of this study is to investigate in detail the feasibility of poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐(L )‐histidine methyl ester), PHEMAH membranes for purification of immunoglobulin G (IgG) from human plasma. PHEMAH membranes were prepared by photo‐polymerization technique. Then, Zn²⁺, Ni²⁺, Co²⁺, and Cu²⁺ ions were chelated directly on the PHEMAH membranes. Elemental analysis assay was performed to determine the nitrogen content and polymerized MAH was calculated as 168.5 μmol/g. The nonspecific IgG adsorption onto the plain PHEMA membranes was negligible (about 0.25 mg/mL). A remarkable increase in the IgG adsorption capacities were achieved from human plasma with PHEMAH membranes (up to 68.4 mg/mL). Further increase was observed with the metal‐chelated PHEMAH membranes (up to 118 mg/mL). The metal‐chelate affinity membranes allowed the one‐step separation of IgG from human plasma. The binding range of metal ions for surface histidines from human plasma followed the order: Cu²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺. Adsorbed IgG was eluted using 250 mM EDTA with a purity of 94.1%. IgG molecules could be repeatedly adsorbed and eluted with the metal‐chelated PHEMAH membranes without noticeable loss in their IgG adsorption capacity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thiourea modified hyper‐crosslinked polystyrene resin for heavy metal ions removal from aqueous solutions

A hyper‐crosslinked resin chemically modified with thiourea (TM‐HPS) was synthesized, characterized, and evaluated for the removal of heavy metal ions (Pb²⁺, Cd²⁺, and Cu²⁺) from aqueous solutions. The structural characterization results showed that a few thiourea groups were grafted on the surface of the resin with a big BET surface area and a large number of narrow micropores. Various experimental conditions such as pH, contact time, temperature, and initial metal concentration of the three heavy metal ions onto TM‐HPS were investigated systematically. The results indicated that the prepared resin was effective for the removal of the heavy metal ions from aqueous solutions. The isotherm data could be better fitted by Langmuir model, yielding maximum adsorption capacities of 689.65, 432.90, and 290.69 mg/g for Pd²⁺, Cd²⁺, and Cu²⁺, respectively. And the adsorption kinetics of the three metal ions followed the pseudo‐second‐order equation. FTIR and XPS analysis of TM‐HPS before and after adsorption further revealed that the adsorption mechanism could be a synergistic effect between functional groups and metal ions and electrostatic attraction, which may provide a new insight into the design of highly effective adsorbents and their potential technological applications for the removal of heavy metal ions from aqueous solutions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45568.     

L-cystein modified bentonite-cellulose nanocomposite (cellu/cys-bent) for adsorption of Cu2+, Pb2+, and Cd2+ ions from aqueous solution

In this study, L-cystein modified bentonite-cellulose (cellu/cys-bent) nanocomposite was synthesized and characterized by XRD, FTIR, SEM with EDS, TGA, and TEM techniques. In order to optimize the process the effect of various operational parameters such as pH, adsorbent dosage, contact time, and temperature were also investigated. The adsorption experiments were carried out in initial concentrations range of 20-100 mg L^?1and the adsorbent affinity for metal ions was found to be in order of Cu²⁺ > Pb²⁺ > Cd²⁺. The optimum pH for adsorption of Cu²⁺ and Cd²⁺ was observed at 5 while for Pb²⁺ it was pH 6. Based on the Langmuir model, the maximum adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ at 50^?C was found to be 32.36, 18.52, and 16.12 mg g^?1, respectively. The Langmuir isotherm and pseudo-second order model were found to be better fitted than the other isotherms and kinetic models. The results of thermodynamic parameters confirmed the process to be endothermic and spontaneous in nature.     

Synthesis of chelating resins with iminodiacetic acid and its wastewater treatment application

The chelating resins have high potential applications for the selective removal and recovery of metal ions from industrial waste solutions. The hydrophilic acrylate monomer with the iminodiacetic acid chelating group was prepared from glycidyl methacrylate and iminodiacetic acid at 60°C. The microbeads, prepared from acrylate monomer with the iminodiacetic acid chelating group, were employed by inversion suspension polymerization. In the pH range of 2–6, a reasonably good equilibrium sorption capacity is maintained for Cr³⁺ (ca. 2.7 mmol/g) and Cu²⁺ (ca. 1.8 mmol/g) in the chelating resins. The adsorption of Cd²⁺ and Pb²⁺ on microbeads is clearly affected by the pH of the solution, such that these ions' adsorption capacity increased with the pH of the aqueous solution. The adsorption of Cd²⁺ (ca. 1.25–1.87 mmol/g) and Pb²⁺ (ca. 0.99–1.89 mmol/g) showed a maximum at approximately pH = 5 and 6, respectively. The adsorption isotherms of Cr³⁺ and Cu²⁺ adsorbed on microbeads were following the Langmuir isotherm, but the adsorption behavior of Cd²⁺ and Pb²⁺ were not. The concentration of alkaline earth–metal cations on the range of 0–200 ppm had no influence on metal ions adsorbed capacity of chelating resins. Additionally, NTA (nitrilotriacetic acid) had no significant influence on metal ion adsorption by chelating resins. Furthermore, phenol pollutant can be adsorbed effectively by metal ions chelated microbeads; therefore, the microbeads were useful not only in recovering metal ions but also in the treating phenol pollutants in wastewater. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1353–1362, 2002; DOI 10.1002/app.10243     

Functionalized nanostructured silica by tetradentate-amine chelating ligand as efficient heavy metals adsorbent : Applications to industrial effluent treatment

Organofunctionalized nanostructured silica SBA-15 with tri(2-aminoethyl)amine tetradentate-amine ligand was synthesized and applied as adsorbent for the removal of Cu²⁺, Pb²⁺, and Cd²⁺ from both synthetic wastewater and real paper mill and electroplating industrial effluents. The prepared materials were characterized by XRD, N₂ adsorption-desorption, TGA, and FT-IR analysis. The Tren-SBA-15 was found to be a fast adsorbent for heavy metal ions from single solution with affinity for Cu²⁺, Pb²⁺, than for Cd²⁺ due to the complicated impacts of metal ion electronegativity. The kinetic rate constant decreased with increasing metal ion concentration due to increasing of ion repulsion force. The equilibrium batch experimental data is well described by the Langmuir isotherm. The maximum adsorption capacity was 1.85 mmol g^?1 for Cu²⁺, 1.34 mmol g^?1 for Pb²⁺, and 1.08 mmol g^?1 for Cd²⁺ at the optimized adsorption conditions (pH=4, T=323 K, t=2 h, C₀=3 mmol L^?1, and adsorbent dose=1 g L^?1). All Gibbs energy was negative as expected for spontaneous interactions, and the positive entropic values from 103.7 to 138.7 J mol^?1 K^?1 also reinforced this favorable adsorption process in heterogeneous system. Experiment with real wastewaters showed that approximately a half fraction of the total amount of studied metal ions was removed within the first cycle of adsorption. Hence, desorption experiments were performed by 0.3M HCl eluent, and Tren-SBA-15 successfully reused for four adsorption/desorption cycles to complete removal of metal ions from real effluents. The regenerated Tren-SBA-15 displayed almost similar adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ even after four recycles. The results suggest that Tren-SBA-15 is a good candidate as an adsorbent in the removal of Cu²⁺, Pb²⁺, and Cd²⁺ from aqueous solutions.     

Adsorption characteristics of metal ions by CO2-fixing Chlorella sp. HA-1

Single and binary metal systems were employed to investigate the removal characteristics of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by Chlorella sp. HA-1 that were isolated from a CO₂ fixation process. Adsorption test of single metal systems showed that the maximum metal uptakes were 0.767 mmol Pb²⁺, 0.450 mmol Cd²⁺, 0.334 mmol Cu²⁺ and 0.389 mmol Zn²⁺ per gram of dry cell. In the binary metal systems, the metal ions on Chlorella sp. HA-1 were adsorbed selectively according to their adsorption characteristics. Pb²⁺ ions significantly inhibited the adsorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions, while Cu²⁺ ions decreased remarkably the metal uptake of Cd²⁺ and Zn²⁺ ions. The relative adsorption between Cd²⁺ and Zn²⁺ ions was reduced similarly by the presence of the other metal ions.     

Synthesis of sulfhydryl chitin and its adsorption properties for heavy metal ions

This article discusses the preparation of the water‐insoluble adsorbent sulfhydryl chitin (s‐chitin), by treatment of the chitin with sulfhydryl acetic acid in the presence of sulfuric acid as a catalyst. Its structure was confirmed by elemental analysis, FTIR spectra analysis and near‐IR spectra analysis. We also investigated the adsorption properties of sulfhydryl chitin for Cu^II, Cd^II, Pb^II, Cr^III, and Ni^II. Based on the research results of adsorption capacity, the effect of pH value on adsorption, adsorption kinetics experiments, and selective adsorption experiments were observed. It has been shown that the s‐chitin has much better adsorption for Pb^II, Cu^II, and Cd^II than chitin itself. The adsorption capacities of s‐chitin for Pb^II, Cu^II, and Cd^II were 108.3, 94.7, and 57.1 mg/g, respectively. It also had good adsorption properties for heavy metal ions. The adsorption capacities were also affected by the acidity of medium. The adsorbed Cu^II, Cd^II, and Pb^II could be eluted by diluted chlorhydric acid. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 151–155, 2000     

Stability constants of amidoximated chitosan‐g‐poly(acrylonitrile) copolymer for heavy metal ions

Amidoximated chitosan‐g‐poly(acrylonitrile) (PAN) copolymer was prepared by a reaction between hydroxylamine and cyano group in chitosan‐g‐PAN copolymer prepared by grafting PAN onto crosslinked chitosan with epychlorohydrine. The adsorption and desorption capacities for heavy metal ions were measured under various conditions. The adsorption capacity of amidoximated chitosan‐g‐PAN copolymer increased with increasing pH values, and was increased for Cu²⁺ and Pb²⁺ but a little decreased for Zn²⁺ and Cd²⁺ with increasing PAN grafting percentage in amidoximated chitosan‐g‐PAN copolymer. In addition, desorption capacity for all metal ions was increased with increasing pH values in contrast to the adsorption results. Stability constants of amidoximated chitosan‐g‐PAN copolymer were higher for Cu²⁺ and Pb²⁺ but lower for Zn²⁺ and Cd²⁺ than those of crosslinked chitosan. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 469–476, 1999     

Cd2+, Cu2+, Pb2+, Sr2+, and Y3+ binding characteristics of 17β‐estradiol molecularly imprinted polymer particles incorporated with dicyclohexano‐18‐crown‐6 for urine bioassay

The metal ion binding characteristics of molecularly imprinted polymer (MIP) submicron particles prepared using 17β‐estradiol (E2) as a template, and incorporated with dicyclohexano‐18‐crown‐6 (DCH18C6), were studied using differential pulse anodic stripping voltammetry. When Sr²⁺ was added to DCH18C6‐E2‐MIP particles already occupied by Cd²⁺, Cu²⁺, and Pb²⁺ inside the binding sites, a displacement reaction was observed: Cd²⁺/Cu²⁺/Pb²⁺‐DCH18C6‐E2‐MIP + Sr²⁺ = Sr²⁺‐DCH18C6‐E2‐MIP + Cd²⁺/Cu²⁺/Pb²⁺. This demonstrated that DCH18C6 had stronger binding affinity for Sr²⁺ than Cd²⁺ Cu²⁺ or Pb²⁺. Strong DCH18C6 binding affinity was also observed for Y³⁺. Atomic emission spectrometry showed that DCH18C6‐E2‐MIP particles (150 mg/mL) resulted in 52% binding of Sr²⁺ (2000 ppm, at pH 6.3 ± 0.1 and ionic strength of 0.1M NaNO₂). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Removal of metal ions using lignite in aqueous solution—Low cost biosorbents

Turkish lignite can be used as a new adsorption material for removing some toxic metals from aqueous solution. The adsorption of lignite (brown young coals) to remove copper (Cu²⁺), lead (Pb²⁺), and nickel (Ni²⁺) from aqueous solutions was studied as a function of pH, contact time, metal concentration and temperature. Adsorption equilibrium was achieved between 40 and 70 min for all studied cations except Pb²⁺, which is between 10 and 30 min. The adsorption capacities are 17.8 mg/g for Cu²⁺, 56.7 mg/g for Pb²⁺, 13.0 mg/g for Ni²⁺ for BC₁ (Ilg?n lignite) and 18.9 mg/g for Cu²⁺, 68.5 mg/g for Pb²⁺, 12.0 mg/g for Ni²⁺ for BC₂ (Beysehir lignite) and 7.2 mg/g for Cu²⁺, 62.3 mg/g for Pb²⁺, 5.4 mg/g for Ni²⁺ for AC (activated carbon). More than 67% of studied cations were removed by BC₁ and 60% BC₂, respectively from aqueous solution in single step. Whereas about 30% of studied cations except Pb²⁺, which is 90%, were removed by activated carbon. Effective removal of metal ions was demonstrated at pH values of 3.8–5.5. The adsorption isotherms were measured at 20 °C, using adsorptive solutions at the optimum pH value to determine the adsorption capacity. The Langmuir adsorption isotherm was used to describe observed sorption phenomena. The rise in temperature caused a slight decrease in the value of the equilibrium constant (K_c) for the sorption of metal ions. The mechanism for cations removal by the lignite includes ion exchange, complexation and sorption. The process is very efficient especially in the case of low concentrations of pollutants in aqueous solution, where common methods are either economically unfavorable or technically complicated.     

Ion imprinted beads embedded cryogels for in vitro removal of iron from β-thalassemic human plasma

Molecular recognition based Fe³⁺ imprinted poly(GMA-MAC) (MIP) beads embedded PHEMA composite cryogel was prepared for selective removal of Fe³⁺ ions from β-thalassemia patient plasma. The precomplexation was achieved by the coordination of Fe³⁺ ions with N-methacryloyl-(L )-cysteine methyl ester (MAC-Fe³⁺). MIP beads were prepared by dispersion polymerization in the presence of MAC-Fe³⁺ complex and glycidyl methacrylate (GMA) monomer. Then the MIP beads were embedded into poly(hydroxyethyl methacrylate) (PHEMA) cryogel. The specific surface area and the swelling degree of the PHEMA-MIP composite cryogel were found to be 76.8 m²/g and 7.7 g H₂O/g cryogel, respectively. The maximum adsorption amount of Fe³⁺ ions was 2.23 mg/g. The relative selectivity of PHEMA-MIP composite cryogel towards the Fe³⁺ ions was 135.0, 61.4, and 57.0 times greater than that of the PHEMA-NIP cryogel as compared with the Ni²⁺, Zn²⁺, and Fe²⁺ ions, respectively. PHEMA-MIP composite cryogel was recovered and reused many times without any significant decrease in its adsorption capacity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012