Antibody purification from human plasma by metal‐chelated affinity membranes

The aim of this study is to investigate in detail the feasibility of poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐(L )‐histidine methyl ester), PHEMAH membranes for purification of immunoglobulin G (IgG) from human plasma. PHEMAH membranes were prepared by photo‐polymerization technique. Then, Zn²⁺, Ni²⁺, Co²⁺, and Cu²⁺ ions were chelated directly on the PHEMAH membranes. Elemental analysis assay was performed to determine the nitrogen content and polymerized MAH was calculated as 168.5 μmol/g. The nonspecific IgG adsorption onto the plain PHEMA membranes was negligible (about 0.25 mg/mL). A remarkable increase in the IgG adsorption capacities were achieved from human plasma with PHEMAH membranes (up to 68.4 mg/mL). Further increase was observed with the metal‐chelated PHEMAH membranes (up to 118 mg/mL). The metal‐chelate affinity membranes allowed the one‐step separation of IgG from human plasma. The binding range of metal ions for surface histidines from human plasma followed the order: Cu²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺. Adsorbed IgG was eluted using 250 mM EDTA with a purity of 94.1%. IgG molecules could be repeatedly adsorbed and eluted with the metal‐chelated PHEMAH membranes without noticeable loss in their IgG adsorption capacity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of azo‐functionalized ion‐imprinted polymeric resin for selective extraction of nickel(II) ions

The work presented involved the fabrication and evaluation of an ion‐imprinted azo‐functionalized phenolic resin for selective extraction of Ni²⁺ ions from aqueous media. The azo‐containing ligand was first synthesized by coupling of a p‐aminophenol diazonium salt with resorcinol. The ligand was coordinated with Ni²⁺ ion template before condensation polymerization with formaldehyde and resorcinol was performed. The Ni²⁺ ions were extracted from the crosslinked resin matrix to finally afford the Ni²⁺ ion‐imprinted Ni‐PARF adsorbent. The synthetic steps were extensively investigated using elemental analysis and Fourier transform infrared, NMR and energy‐dispersive X‐ray spectroscopies. Also, the surface morphologies along with the surface areas of the adsorbent resin were evaluated using scanning electron microscopy and Brunauer–Emmett–Teller techniques, respectively. Batch experiments indicated that the pseudo‐second‐order kinetic equation provided the best fit with the experimentally obtained kinetic data and equilibrium was reached after 40 min. The isotherm studies were also in a good fit with the Langmuir model and the maximum adsorption capacities of Ni²⁺ ions with respect to both Ni‐PARF and control non‐imprinted C‐PARF adsorbents were around 260 and 100 mg g^?1, respectively. In the presence of Co²⁺, Cu²⁺, Zn²⁺ and Pb²⁺ as competing coexisting ions, the relative selectivity coefficients of Ni‐PARF for Ni²⁺ were, respectively, 84.91, 44.97, 30.41 and 32.20. Regeneration experiments indicated that after eight adsorption/desorption cycles, the Ni‐PARF adsorbent still maintained around 97% of its initial efficiency. © 2018 Society of Chemical Industry     

Ion‐imprinted PHEMA based monolith for the removal of Fe3+ ions from aqueous solutions

Molecular recognition based Fe³⁺ imprinted monolith was prepared for selective removal of Fe³⁺ ions from aqueous solutions. The precomplexation was achieved by the coordination of Fe³⁺ ions with N‐methacryloyl‐(L )‐cysteine methyl ester (MAC) to form the complex monomer (MAC‐Fe³⁺). The polymerization step was then carried out in the presence of MAC‐Fe³⁺ complex and hydroxyethyl methacrylate (HEMA) monomer by bulk polymerization to constitude a Fe³⁺‐imprinted polymer (PHEMAC‐Fe³⁺). The specific surface area of PHEMAC‐Fe³⁺ monolith was found to be 35.2 m²/g, with a swelling ratio of 60.2% after the template was removed from the monolith by 0.1M EDTA solution. The maximum adsorption capacity of PHEMAC‐Fe³⁺ monolith for Fe³⁺ ion was 0.76 mg/g. The adsorption behavior of the monolith has been successfully described by the Langmuir isotherm. It was determined that the relative selectivity of PHEMAC‐Fe³⁺ monolith was 59.7 and 37.0 times greater than that of the nonimprinted PHEMAC monolith as compared with the Cd²⁺ and Ni²⁺ ions, respectively. The PHEMAC‐Fe³⁺ monolith was recovered and reused many times without any significant decrease in its adsorption capacity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of functionalized ion‐imprinted phenolic polymer for efficient removal of copper ions

In this work, an ion‐imprinted polymeric material based on functionalized phenolic resin was developed for the efficient selective removal of Cu²⁺ ions from aqueous solution. p‐Aminophenol‐isatin Schiff base ligand (HPIS) was first synthesized and combined with Cu²⁺ ions to prepare the corresponding complex [Cu(PIS)₂]. The Schiff base ligand along with its copper complex was fully investigated and characterized before anchoring in a base‐catalyzed condensation copolymerization with formaldehyde and resorcinol. The Cu²⁺ ions were removed from the obtained resin construction and the resulting Cu²⁺ ion‐imprinted material (Cu‐PIS) was employed for the selective extraction of Cu²⁺ ions under different pH values, initial concentrations and contact time conditions. The optimum pH for the removal process was chosen as 6 and the maximum adsorption capacity was 187 ± 1 mg g^–1. Also, the kinetics showed a better fit with the pseudo‐second‐order equations. The selectivity of the prepared Cu‐PIS was also evaluated in a multi‐ionic species containing Ni²⁺, Cd²⁺, Pb²⁺, Co²⁺ besides Cu²⁺ ions and the determined parameters confirmed a superior recognition capability toward the imprinted Cu²⁺ ions. © 2019 Society of Chemical Industry     

Preparation of Zn2+‐chelated poly(HEMA‐MAH) cryogel for affinity purification of chicken egg lysozyme

Supermacroporous poly(2‐hydroxyethyl methacrylate) [poly(HEMA)]‐based monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with N‐methacryloyl‐L ‐histidine methyl ester (MAH) as functional comonomer and N,N′‐methylene‐bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for affinity purification of lysozyme from chicken egg white. The monolithic cryogel containing a continuous polymeric matrix having interconnected pores of 10–50 μm size was loaded with Zn²⁺ ions to form the metal chelate with poly(HEMA‐MAH) cryogel. Poly(HEMA‐MAH) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA‐MAH) monolithic cryogel was 5.62 g H₂O/g cryogel. Poly(HEMA‐MAH) cryogel containing 45.8 μmol MAH/g was used in the adsorption/desorption of lysozyme from aqueous solutions. The nonspecific adsorption of lysozyme was very low (7.5 mg/g). The maximum amount of lysozyme adsorption from aqueous solution in phosphate buffer was 209 mg/g at pH 7.0. It was observed that lysozyme could be repeatedly adsorbed and desorbed with the poly(HEMA‐MAH) cyogel without significant loss of adsorption capacity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Antibody purification using porous metal–chelated monolithic columns

A novel monolithic material was developed to obtain efficient and cost‐effective purification of IgG from human plasma. The porous monolith was obtained by bulk polymerization in a glass tube of 2‐hydroxyethyl methacrylate (HEMA) and N‐methacryloyl‐(L )‐histidine methyl ester (MAH). The poly(HEMA‐MAH) monolith had a specific surface area of 214.6 m²/g and was characterized by swelling studies, porosity measurement, FTIR, scanning electron microscopy, and elemental analysis. Then the monolith was loaded with Cu²⁺ ions to form the metal chelate. Poly(HEMA‐MAH) monolith with a swelling ratio of 74% and containing 20.9 μmol MAH/g was used in the adsorption/desorption of IgG from aqueous solutions and human plasma. The maximum adsorption of IgG from an aqueous solution in phosphate buffer was 10.8 mg/g at pH 7.0. Higher adsorption was obtained from human plasma (up to 104.2 mg/g), with a purity of 94.1%. It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA‐MAH) monolith without significant loss of adsorption capacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 395–404, 2006     

Synthesis of novel copper ion-selective material based on hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate)

A novel hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate) using a double-imprinting approach for the Cu²⁺ selective separation from aqueous medium was prepared. In the imprinting process, both Cu²⁺ ions and surfactant micelles (cetyltrimethylammonium bromide – CTAB) were employed as templates. The hierarchically imprinted organic polymer named (IIP-CTAB), single-imprinted (IIP-no CTAB) and non-imprinted (NIP-CTAB and NIP-no CTAB) polymers were characterized by SEM, FTIR, TG, elemental analysis and textural data from BET (Brunauer–Emmett–Teller) and BJH (Barrett–Joyner–Halenda). Compared to these materials, IIP-CTAB showed higher selectivity, specific surface area and adsorption capacity toward Cu²⁺ ions. Good selectivity for Cu²⁺ was obtained for the Cu²⁺/Cd²⁺, Cu²⁺/Zn²⁺ and Cu²⁺/Co²⁺ systems when IIP-CTAB was compared to the single-imprinted (IIP-no CTAB) and non double-imprinted polymer (NIP-CTAB), thereby confirming the improvement in the polymer selectivity due to double-imprinting effect. For adsorption kinetic data, the best fit was provided with the pseudo-second-order model for the four materials, thereby indicating the chemical nature of the Cu²⁺ adsorption process. Cu²⁺ adsorption under equilibrium was found to follow dual-site Langmuir–Freundlich model isotherm, thus suggesting the existence of adsorption sites with low and high binding energy on the adsorbent surface. From column experiments 600 adsorption–desorption cycles using 1.8 mol L⁻¹ HNO₃ as eluent confirmed the great recoverability of adsorbent. The synthesis approach here investigated has been found to be very attractive for the designing of organic ion imprinted polymer and can be expanded to the other polymers to improve performance of ion imprinted polymers in the field of solid phase extraction.     

Synthesis and characterization of alternating copolymers containing bipyridine and phenylene vinylene for fluorescent chemosensors

Alternating copolymers containing bipyridine and phenylene vinylene were synthesized through a Wittig condensation reaction of their corresponding diphosphonium salts and dialdehydes. The molecular weights of the resulting polymers were relatively low because of the low solubility in the reaction solvents. The optical properties of the polymers were substantially affected by the repeating units of phenylene vinylene. The absorption spectra of the copolymers in the solid state exhibited a bathochromic shift compared to those carried out in solution. The effective conjugation length could be extended with the addition of Cu²⁺, Ni²⁺, and Zn²⁺ ions into the polymer solutions in a 1 : 1 ratio of the bipyridine to the phenylene vinylene units. All of the polymer solutions behaved as a turn‐off fluorescent chemosensor upon the addition of a variety of the metal ions. The sensing behavior to various metal ions revealed that the polymers were highly sensitive to the Cu²⁺, Ni²⁺, and Zn²⁺ ions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42795.     

Formation of thermosensitive copolymer beads having phosphinic acid groups and adsorption ability for metal ions

Hydrophilic thermosensitive copolymer beads having phosphinic acid groups were prepared by suspension copolymerization of acryloyloxypropyl n‐octylphosphinic acid (APPO), N‐isopropyl acrylamide (NIPAAm), and tetraethyleneglycol dimethacrylate (4G). The thermosensitivity and the adsorption ability of the copolymer beads for metal ions beads were studied. The APPO‐NIPAAm‐4G copolymer beads were obtained in a good yield by suspension copolymerization of monomers (APPO, NIPAAm, and 4G) dissolved in chloroform, in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃. The APPO‐NIPAAm‐4G copolymer beads had higher adsorption ability for lanthanide metal ions (Eu³⁺, Sm³⁺, Nd³⁺, or La³⁺) than for main transition metal ions (Cu²⁺, Ni²⁺, or Co²⁺). Furthermore, it was also found that the APPO‐NIPAAm‐4G copolymer beads had selective adsorption ability between lanthanide metal ions, and the order of adsorption ability for lanthanide metal ions was as follows: Eu³⁺ > Sm³⁺ > Nd³⁺ > La³⁺. The selective adsorption for these metal ions from their mixed solutions was performed by both a batch method and a column method. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 449–460, 2006     

Sorption properties of the iminodiacetate ion exchange resin,amberlite IRC‐718, toward divalent metal ions

The sorption properties of the commercially available cationic exchange resin, Amberlite IRC‐718, that has the iminodiacetic acid functionality, toward the divalent metal‐ions, Fe²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ were investigated by a batch equilibration technique at 25°C as a function of contact time, metal ion concentration, mass of resin used, and pH. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Fe²⁺ and that the metal‐ion uptake follows the order: Fe²⁺ > Cu²⁺> Zn²⁺ >Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Adsorption characteristics of metal ions by CO2-fixing Chlorella sp. HA-1

Single and binary metal systems were employed to investigate the removal characteristics of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by Chlorella sp. HA-1 that were isolated from a CO₂ fixation process. Adsorption test of single metal systems showed that the maximum metal uptakes were 0.767 mmol Pb²⁺, 0.450 mmol Cd²⁺, 0.334 mmol Cu²⁺ and 0.389 mmol Zn²⁺ per gram of dry cell. In the binary metal systems, the metal ions on Chlorella sp. HA-1 were adsorbed selectively according to their adsorption characteristics. Pb²⁺ ions significantly inhibited the adsorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions, while Cu²⁺ ions decreased remarkably the metal uptake of Cd²⁺ and Zn²⁺ ions. The relative adsorption between Cd²⁺ and Zn²⁺ ions was reduced similarly by the presence of the other metal ions.     

Selective removal of copper ions from multi‐component aqueous solutions using modified silica impregnated with LIX 84

A silica support impregnated with 2‐hydroxy‐5‐nonylacetophenone oxime (LIX 84) was prepared after surface modification by ‐aminopropyltriethoxysilane. Fixed‐bed tests were conducted to investigate the capabilities of the prepared adsorbent with respect to the selective removal of copper ions from multi‐metal solutions. Break‐through curves were obtained using the modified silica for a solution containing Cu²⁺, Cd²⁺, Ni²⁺, Co²⁺ and Zn²⁺, as well as an industrial electronics wastewater sample. The copper adsorption capacities for the multi‐metal solution and the wastewater were 0.175 and 0.198 mmolg⁻¹, respectively under the conditions used in this study. The copper recovery ratios for the modified silica treated with the multi‐metal solution and the wastewater were 86 and 91%, respectively after treating with 0.1 moldm⁻³ HNO₃. The results show that the modified silica, prepared here, has potential value for the selective removal of copper ions from multi‐component aqueous solutions containing multi‐metals using a fixed‐bed reactor. © 2000 Society of Chemical Industry     

Preparation of a surface molecular‐imprinted adsorbent for Ni2+ based on Penicillium chrysogenum

A new chitosan molecular‐imprinted adsorbent was prepared from the mycelium of waste biomass. The results showed that an adsorbent using Penicillium chrysogenum mycelium as the core material was better than one derived from peanut coat. The adsorption capacity of the surface‐imprinted adsorbent for Ni²⁺ was enhanced by increasing the chitosan concentration in the imprinting process. Epichlorohydrin was better than glutaraldehyde as a cross‐linking agent; the optimal imprinted Ni²⁺ concentration for preparing the surface‐imprinted adsorbent was 2 mg (Ni²⁺) g^?1 of mycelium. The adsorption capacity of the surface‐imprinted adsorbent was 42 mg g^?1 (at 200 mg dm^?3 initial metal ions concentration) and twice that of the mycelium adsorbent. The surface‐imprinted adsorbent can be reused for up to 15 cycles without loss of adsorption capacity. Copyright © 2005 Society of Chemical Industry     

Characterization of Adsorptive Capacity and Investigation of Mechanism of Cu2+, Ni2+ and Zn2+ Adsorption on Mango Peel Waste from Constituted Metal Solution and Genuine Electroplating Effluent

Abstract

The present study reports the potential of mango peel waste (MPW) as an adsorbent material to remove Cu²⁺, Ni²⁺, and Zn²⁺ from constituted metal solutions and genuine electroplating industry wastewater. Heavy metal ions were noted to be efficiently removed from the constituted solution with the selectivity order of Cu²⁺ > Ni²⁺ > Zn²⁺. The adsorption process was pH-dependent, while the maximum adsorption was observed to occur at pH 5 to 6. Adsorption was fast as the equilibrium was established within 60 min. Maximum adsorption of the heavy metal ions at equilibrium was 46.09, 39.75, and 28.21 mg g for Cu²⁺, Ni²⁺, and Zn²⁺, respectively. Adsorption data of all the three metals fit well the Langmuir adsorption isotherm model with 0.99 regression coefficient. Release of alkali and alkaline earth metal cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and protons H⁺ from MPW, during the uptake of Cu²⁺, Ni²⁺, and Zn²⁺, and EDX analysis of MPW, before and after the metal sorption process, revealed that ion exchange was the main mechanism of sorption. FTIR analysis showed that carboxyl and hydroxyl functional groups were involved in the sorption of Cu²⁺, Ni²⁺, and Zn²⁺. MPW was also shown to be highly effective in removing metal ions from the genuine electroplating industry effluent samples as it removed all the three metal ions to the permissible levels of discharge legislated by environment protection agencies. This study indicates that MPW has the potential to effectively remove metal ions from industrial effluents.     

Effect of adsorbed metal ions and buffer nature on IgG separation from human plasma by column chromatography using an ion exchange resin,Amberlite IRC‐718

Fractionation of human plasma on ion exchanger resin was performed on Amberlite IRC‐718 saturated with metal ions. Depletion of human immunoglobulin G was carried out by column chromatography using Tris‐HCl, pH 7 at different concentrations. Results showed that, when Cu⁺² and Ni⁺² were adsorbed on the resin, one or two fractions of purified IgG were obtained, respectively. Whereas Fe⁺² and Zn⁺², both retain IgG and serum albumin or serum albumin alone. Furthermore, the Ni⁺²‐resin retention of serum proteins is too strong that the use of 700 mMTris‐HCl cannot liberate any other proteins than nonadsorbed serum albumin. In conclusion, this investigation demonstrates that immobilized metal ion affinity chromatography with Cu²⁺, Ni²⁺, and Fe²⁺ immobilized on Amberlite IRC‐718 has the potential to be developed as part of a process to purify IgG out of untreated human plasma as acceptable adsorption and elution levels of IgG could be achieved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and adsorption properties,toward some heavy metal ions,of a new polystyrene‐based terpyridine polymer

A novel polymeric ligand having 2,2′:6′,2″‐terpyridine as pendant group was prepared through a Williamson type etherification approach for the reaction between 4′‐hydroxy‐2,2′: 6′,2″‐terpyridine and the commercially available 4‐chloromethyl polystyrene. The chelating properties of the new polymer toward the divalent metal ions (Cu²⁺, Zn²⁺, Ni²⁺, and Pb²⁺) in aqueous solutions was studied by a batch equilibration technique as a function of contact time, pH, mass of resin, and concentration of metal ions. The amount of metal‐ion uptake of the polymer was determined by using atomic absorption spectrometry. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Pb²⁺ and that the metal‐ion uptake follows the order: Pb²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Column studies on metal ion removal by dyed cellulosic materials

Cellulosic materials, namely bleached bamboo pulp, jute fibers, and sawdust dyed with a reactive dye of monochlorotriazine type were used in the column studies for removal of different metal ions. The use of an adsorption column makes the process continuous, so that it is economically viable on an industrial scale. After the adsorption of metal ions such as Cu²⁺, Pb²⁺, Hg²⁺, Fe²⁺, Fe³⁺, Zn²⁺ and Ni²⁺, the adsorbents were successfully regenerated by using dilute acids. These columns were then used repeatedly for adsorption either of the same salt for more than ten times or of different salts in succession. No loss in adsorption power was observed.     

Synthesis and adsorption properties of macroporous cross‐linked polystyrene that contains an immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole with tetraethylene glycol spacers

A novel chelating resin macroporous cross‐linked polystyrene immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole via a hydrophilic tetraethylene glycol spacer (PS‐TEG‐BMT) is synthesized and the structure is characterized by means of Fourier transform infrared spectroscopy (FTIR), energy dispersive X‐ray microanalysis (EDX), and elementary analysis. Its adsorption capacity for several metal ions such as Hg²⁺, Ag⁺, Ni²⁺, Pb²⁺, Cd²⁺, Fe³⁺, Bi³⁺, Zn²⁺, and Cu²⁺ are investigated. The initial experimental result shows that this resin has higher adsorption selectivity for Hg²⁺ and Ni²⁺ than for the other metal ions and the introduction of hydrophilic TEG spacer is beneficial to increase adsorption capacities. The result also shows that the Langmuir model is better than the Freundlich model to describe the isothermal process of PS‐TEG‐BME resin for Hg²⁺. Five adsorption‐desorption cycles demonstrate that this resin are suitable for reuse without considerable change in adsorption capacity. POLYM. ENG. SCI., 45:1515–1521, 2005. © 2005 Society of Plastics Engineers     

Reversible immobilization of glycoamylase by a variety of Cu2+‐chelated membranes

Glycoamylase (AMG) is an γ‐amylase enzyme which catalyzes the breakdown of large α(1,4)‐linked malto‐oligosaccharides to glucose. It is an extracellular enzyme and is excreted to the culture medium. In this study, AMG was immobilized on a variety of metal affinity membranes, which were prepared by chelating Cu²⁺ ions onto poly(hydroxyethyl methacrylate) (PHEMA) using N‐methacryloyl‐(L )‐histidine methyl ester (MAH), N‐methacryloyl‐(L )‐cysteine methyl ester (MAC), and N‐methacryloyl‐(L )‐phenylalanine methyl ester (MAPA) as metal‐chelating comonomers for reversible immobilization of AMG. The PHEMAH, PHEMAC, PHEMAPA membranes were synthesized by UV‐initiated photo‐polymerization and Cu²⁺ ions were chelated on the membrane surfaces. Cu²⁺‐chelated membranes were characterized by swelling tests, SEM, contact angle measurements, elemental analysis, and FTIR. AMG immobilization on the Cu²⁺‐chelated membranes was performed by using aqueous solutions of different amounts of AMG at different pH values and Cu²⁺ loadings. Durability tests concerning desorption of AMG and reusability of the Cu²⁺‐chelated membranes yielded acceptable results. It was computationally determined that AMG possesses four likely Cu²⁺/Zn²⁺ binding sites, away from the catalytic site, to which the metal‐chelated membranes can be efficiently used. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Chelating polymer bearing triazolylazophenol moiety as the functional group

The chelating polymer-bearing triazolylazophenol moiety as the functional group was synthesized, its metal adsorption properties for 6 divalent heavy metal ions; Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ were investigated. The capacity of the polymer for Cu²⁺ achieved 8.7 mEq/g in pH 5.3 solution. The polymer showed remarkable color changes from orange to red violet or blue violet with its chelations to the heavy metal ions. The metal adsorption rates of the polymer were rapid in performing complete capacity saturation of heavy metal ions in about 30 min. The capacities varied little the presence of alkali or alkaline earth metal ions in solutions. The perfect elimination of metals from the polymer–M²⁺ chelates were performed with mineral acid solutions. The metal ions; Cu²⁺ and Ni²⁺ in plating-process solutions were effectively removed by the chelating polymer, and the polymer can be practically used for the removal of these ions from waste water.