Synthesis and properties of the amino‐functionalized multiple‐walled carbon nanotubes/polyimide nanocomposites

The 1,6‐hexanediamine‐functionalized multi‐walled carbon nanotubes(a‐MWNTs)/polyimide(PI) nanocomposite films were prepared through in‐situ polymerization followed by mixture casting, evaporation, and thermal imidization. To increase the compatibility of carbon nanotubes with the matrix polyimide, a‐MWNTs was used as the filler. According to the results, a‐MWNTs were homogeneously dispersed in the nanocomposite films. With the incorporation of a‐MWNTs, the mechanical properties of the resultant films were improved due to the strong chemical bonding and interfacial interaction between a‐MWNTs and 4,4′‐oxydiphthalic anhydride(ODPA)/4,4′‐Oxydianiline(ODA) polyimide matrix. The thermal stability of the a‐MWNTs/polyimide nanocomposite was also improved by the addition of a‐MWNTs. The electrical tests showed a percolation threshold at about 0.85 vol% and the electrical properties were increased sharply. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Preparation and characterization of alkylated carbon nanotube/polyimide nanocomposites

BACKGROUND: The development of carbon nanotube‐reinforced composites has been impeded by the difficult dispersion of the nanotubes in polymers and the weak interaction between the nanofiller and matrices. Efficient dispersion of carbon nanotubes is essential for the formation of a functional nanotube network in a composite matrix. RESULTS: Multiwalled carbon nanotubes (MWNTs) were incorporated into a polyimide matrix to produce MWNT/polyimide nanocomposites. To disperse well the MWNTs in the matrix and thus improve the interfacial adhesion between the nanotubes and the polymer, ‘branches’ were grafted onto the surface of the nanotubes by reacting octadecyl isocyanate with carboxylated MWNTs. The functionalized MWNTs were suspended in a precursor solution, and the dispersion was cast, followed by drying and imidization to obtain MWNT/polyimide nanocomposites. CONCLUSION: The functionalized MWNTs appear as a homogeneous dispersion in the polymer matrix. The thermal stability and the mechanical properties are greatly improved, which is attributed to the strong interactions between the functionalized MWNTs and the polyimide matrix. Copyright © 2009 Society of Chemical Industry     

Amino‐functionalized multiple‐walled carbon nanotubes‐polyimide nanocomposite films fabricated by in situ polymerization

For the preparation of high‐quality polymeric carbon nanocomposites, it is required that carbon nanotubes are fully compatible with matrix polymers. For this purpose, amino‐functionalized multiple‐walled carbon nanotubes (a‐MWNTs) were synthesized. The a‐MWNTs/polyimide nanocomposite films were prepared through in situ polymerization. According to the spectroscopic characterizations, the a‐MWNTs were homogeneously dispersed in the nanocomposite films as the acid‐functionalized MWNTs. The mechanical properties of the polyimide composite were also studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

聚氨酯/多壁碳纳米管复合薄膜的制备及其热稳定性研究

通过溶液共混的方法制备出聚氨酯(PU)/多壁碳纳米管(MWNTs)纳米复合薄膜,重点研究了MWNTs的加入对PU热稳定性能的影响。结果表明,加入质量分数3%的MWNTs,使PU的耐热性得到一定的提高;用Kissinger方法得出的降解活化能由198.01kJ/mol提高到250.05kJ/mol,薄膜的力学性能得到改善,拉伸强度提高了63.5%,伸长率提高了4.2%;TEM分析表明,质量分数3%的MWNTs在PU/MWNTs纳米复合薄膜中得到均匀分散。     

Effects of dispersion and arrangement of clay on thermal diffusivity of polyimide‐clay nanocomposite film

Polymer‐clay nanocomposites are well‐known high‐performance materials with a superior tensile modulus. However, in the case of composites with polyimide (PI), additional functions require study because PI is a high‐performance material in itself. Significant enhancement of thermal conductivity, which is closely related to the state of clay dispersion, is expected for a polymer‐clay nanocomposite. In this study, variations in the thermal diffusivity of PI‐clay nanocomposite films prepared by different methods were investigated. The thermal diffusivity of PI‐clay nanocomposite film increased at low clay content only when unmodified clay was used, where the clay morphology was a layered structure dispersed on a nanometer scale. Moreover, the thermal diffusivity could be enhanced by controlling the tensile stress induced by spontaneous shrinkage of the film during thermal imidization. These results demonstrated that the thermal diffusivity of PI‐clay nanocomposite films is significantly affected by the dispersion and/or arrangement states of the clay. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effects of thermal imidization on mechanical properties of poly(amide‐co‐imide)/multiwalled carbon nanotube composite films

In this study, experimental and numerical studies were performed to investigate the relationship among the functionalization method, weight fraction of MWCNTs, thermal imidization cycle, and mechanical properties of various PAI/MWCNT composite films. Poly(amide‐co‐imide)/multiwalled carbon nanotube composite films were prepared by solution mixing and film casting. The effects of chemical functionalization and weight fraction of multiwalled carbon nanotubes on thermal imidization and mechanical properties were investigated through experimental and numerical studies. The time needed to achieve sufficient thermal imidization was reduced with increasing multiwalled carbon nanotube content when compared with that of a pure poly(amide‐co‐imide) film because multiwalled carbon nanotubes have a higher thermal conductivity than pure poly(amide‐co‐imide) resin. Mechanical properties of pure poly(amide‐co‐imide) and poly(amide‐co‐imide)/multiwalled carbon nanotube composite films were increased with increasing imidization time and were improved significantly in the case of the composite film filled with hydrogen peroxide treated multiwalled carbon nanotubes. Both the tensile strength and strain to failure of the multiwalled carbon nanotube filled poly(amide‐co‐imide) film were increased substantially because multiwalled carbon nanotube dispersion was improved and covalent bonding was formed between multiwalled carbon nanotubes and poly(amide‐co‐imide) molecules. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Efficient dispersion of multi‐walled carbon nanotubes by in situ polymerization

Multi‐walled carbon nanotube (MWNT)‐reinforced polyimide nanocomposites were synthesized by in situ polymerization of monomers in the presence of acylated MWNTs. The acyl groups associated with the MWNTs participated in the reaction through the formation of amide bonds. This process enabled uniform dispersion of MWNT bundles in the polymer matrix. The resultant MWNT–polyimide nanocomposite films were optically transparent with significant mechanical enhancement at a very low loading (0.5 wt%). Evidence has been obtained for improved interactions between the nanotubes and the matrix polymer. Copyright © 2006 Society of Chemical Industry     

Multiwalled carbon nanotube polymer composites: Synthesis and characterization of thin films

The aim of this article was to elucidate the basic relationships between processing conditions and the mechanical and electrical properties of multiwalled carbon nanotube reinforced polymer composites. In conventional chopped fiber reinforced polymer composites, uniform distributions of fibers throughout the matrix are critical to producing materials with superior physical properties. Previous methods have dispersed carbon nanotubes by aggressive chemical modification of the nanotubes or by the use of a surfactant prior to dispersion. 1 , 2 Here, ultrasonic energy was used to uniformly disperse multiwalled nanotubes (MWNTs) in solutions and to incorporate them into composites without chemical pretreatment. Polystyrene (PS) solutions containing MWNTs were cast and spun to yield thin film MWNT composites. The rheology of PS/MWNT suspensions was modeled using the Carreau equation. MWNTs were found to align at the shear rates generated by the spin casting process. The tensile modulus and strain to failure of samples compared well to classical micromechanical models, increasing with MWNT loading. The composite films showed lower strains at the yield stress than neat PS films. The presence of MWNTs at 2.5 vol % fraction approximately doubles the tensile modulus, and transforms the film from insulating to conductive (surface resistivity, ρ, approaching 10³ Ω/□). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2660–2669, 2002     

Incorporation of 4‐aminobenzene functionalized multi‐walled carbon nanotubes in polyaniline for application in formic acid electrooxidation

Incorporation of carbon nanotubes (CNTs) in conducting polymer can lead to new composites with enhanced electrical and mechanical properties. However, the development of such composites has been hampered by the inability to disperse CNTs in polymer matrix due to the lack of chemical compatibility between polymers and CNTs. Covalent sidewall functionalization of carbon nanotube provides a feasible route to incorporate carbon nanotube in polymer. In this work, 4‐aminobenzene groups were grafted onto the surface of multi‐walled carbon nanotube (MWNT) via C? C covalent bond. Polyaniline (PANI)/MWNT composites were fabricated by electrochemical polymerization of aniline containing well‐dissolved functionalized MWNTs. The obtained composites can be used as catalyst supports for electrooxidation of formic acid. Cyclic voltammogram results show that platinum particles deposited in PANI/MWNT composite films exhibit higher electrocatalytic activity and better long‐term stability towards formic acid oxidation than that deposited in pure PANI films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polypropylene/carbon nanotube composites prepared with a environmentally benign processes

Polypropylene (PP)/multiwalled carbon nanotube (MWNT) composites were prepared with an environmentally benign processes. The surface functionalization of the MWNTs was performed with water as a solvent, and the functionalized MWNTs were mixed with PP to form composites with a melt process. The effects of the MWNTs on the mechanical and thermal properties of the composites were studied. The tensile strength and modulus of the composites increased with the amount of MWNTs. The thermal stability was also improved by the reinforced MWNTs. The MWNTs also improved the oxidative stability of the composite on UV irradiation. Although pure PP degraded almost completely after 12 h of irradiation, the composite reinforced with MWNTs retained some level of mechanical strength after UV irradiation. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,structure and properties of polyimide–silica hybrid composites based on biphenyltetracarboxylic dianhydride

A simple and efficient way of synthesizing nanocomposite films using a dispersion technique is reported, with the resulting films having improved mechanical and thermal properties. Nano‐SiO₂ was used in a biphenyltetracarboxylic dianhydride‐based poly(amic acid) precursor and found to be dispersed up to 7 wt% without any additives. The composites were cast to make 10 µm solid films to establish structure and property relationships between liquid and solid film. The structures of the liquid composite materials were studied using NMR and Fourier transform infrared spectroscopy. Solid film properties such as tensile strength, contact angles and thermal behaviour were evaluated for comparison. The properties of the composite films were found to be enhanced compared to polyimide film itself. Atomic force microscopy and macroscale mechanical measurements showed that composite films with more dipolar bonding interactions have higher elastic moduli and are more deformable. They yield higher adhesion energies, and therefore composite coatings offer greater adhesion. There was a limitation in the film formation beyond 5 wt% of silica. Copyright © 2011 Society of Chemical Industry     

Preparation of polyimide/siloxane‐functionalized graphene oxide composite films with high mechanical properties and thermal stability via in situ polymerization

An effective approach to prepare polyimide/siloxane‐functionalized graphene oxide composite films is reported. The siloxane‐functionalized graphene oxide was obtained by treating graphene oxide (GO) with 1,3‐bis(3‐aminopropyl)‐1,1,3,3‐tetra‐methyldisiloxane (DSX) to obtain DSX‐GO nanosheets, which provided a starting platform for in situ fabrication of the composites by grafting polyimide (PI) chains at the reactive sites of functional DSX‐GO nanosheets. DSX‐GO bonded with the PI matrix through amide linkage to form PI‐DSX‐GO films, in which DSX‐GO exhibited excellent dispersibility and compatibility. It is demonstrated that the obvious reinforcing effect of GO to PI in mechanical properties and thermal stability for PI‐DSX‐GO is obtained. The tensile strength of a composite film containing 1.0 wt% DSX‐GO was 2.8 times greater than that of neat PI films, and Young's modulus was 6.3 times than that of neat PI films. Furthermore, the decomposition temperature of the composite for 5% weight loss was approximately 30 °C higher than that of neat PI films. © 2015 Society of Chemical Industry     

Multi-walled carbon nanotube/polyimide composite film fabricated through electrophoretic deposition

Multi-walled carbon nanotube (MWCNT)/polyimide composite films were fabricated through electrophoretic deposition (EPD) of MWCNT-polyamic acid colloidal suspension which was derived from carboxylated-MWCNTs and poly(pyromellitic dianhydride-co-4,4′-oxydianiline) (PMDA-ODA). Under electric field, both negatively charged MWCNTs and PMDA-ODA colloid particles migrate onto a positively charged anode simultaneously, and are converted to a coherent MWCNT/polyimide composite film in the ensuing imidization reaction. Uniform dispersion of MWCNTs in the composite film was observed using transmission electron microscopy. The thickness of the prepared composite film can be tuned by varying processing conditions such as deposition time and anode conductivity. The electrical conductivity of the composite film increased with increasing the concentration of MWCNTs in EPD suspension. The mechanical reinforcement of polyimide using MWCNTs was evaluated by tensile testing and nanoindentation testing.     

Mechanical,thermal, and electrical conducting properties of CNTs/bio‐degradable polymer thin films

The objective of this study is to increase mechanical, thermal, and electrical properties of plasticizer free thermoplastic bio polymer, BIOPLAST GS 2189 (BP), a blend of poly lactic acid (PLA) and potato starch. This polymer is highly suitable for sheet molding, film processing; blown film extrusion and injection molding and fully biodegradable. Structural, mechanical, thermal, and electrical properties of these films were manipulated by reinforcement of multiwalled carbon nanotubes (CNTs) in BP. Thin films of various (1–5 wt %) percentages of CNTs/BP were prepared by using a high‐speed spin coating technique. These as‐prepared films are ～60–100 µm in thickness. The thickness measurements of these films were carried out using micrometry and optical microscopy. The maximum tensile strength (200%) and modulus (150%) was observed for 4 wt % loading of CNTs in BP as compared with the neat BP thin film. The X‐ray diffraction results show that the addition of CNTs in BP increases the crystallinity of BP. Electrical conductivity of this film also increased by 48% as compared with the neat BP polymer films. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thin films of organic polymer composites with inorganic aerogels as dielectric materials: polymer chain orientation and properties

Summary High temperature poly(p-phenylene biphenyltetracarboximide) nanocomposite films with inorganic particulates, which are applicable to the fabrication of microelectronic devices, were prepared from the poly(amic acid) and silica aerogels with a size of ca. 150 nm in diameter by solution blending and subsequent conventional polyimide film formation process. The structure and properties were measured. By the composite formation, the optical and dielectric properties were improved due to the low dielectric constant characteristic of silica aerogels, whereas the interfacial stress and thermal expansion coefficient were significantly degraded by a large disturbance in the polymer chain in-plane orientation caused by silica aerogels despite of their low thermal expansivity. This indicates that in the rigid type of polymer composites with inorganic particulates, the orientation of polymer chains still plays a critical role on the physical properties.     

The effect of different modified multiwalled carbon nanotubes on tribological behaviors of poly(furfuryl alcohol) composite coatings

Three kinds of modified multiwalled carbon nanotubes (MWNTs) with different length were obtained by grafting carboxylic groups on long MWNTs or copolymer groups on short and long MWNTs. The modified MWNTs were examined by infrared spectroscopy, thermal gravimetric analysis, X‐ray photoelectron spectroscopy, and field emission scanning electron microscopy (FESEM). Afterward, the modified MWNTs were introduced into poly (furfuryl alcohol) (PFA), and the tribological behaviors of the resultant PFA composite coatings were investigated using a ring‐on‐block wear tester under dry friction condition. The dispersion of MWNTs in PFA composites and the worn surfaces were investigated by FESEM. The results indicated that the MWNTs dispersion and the tribological behaviors of PFA composite coatings could be obviously improved by modification with the copolymer. More significantly, under similarly uniform dispersion of MWNTs, the tribological properties of PFA composite coatings with short nanotubes presented better results when compared with those with long nanotubes because of the influence of nanotube length on the degree of modification of the MWNTs surfaces. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal and morphological studies on γ‐Fe2O3 polystyrene composites and the affect of additives

γ‐Fe₂O₃polystyrene (PS) composite films were prepared by a gel‐casting technique to obtain monodisperse composite films. To understand the effect of additives on the prepared composite films, additives such as rice husk ash and thiourea were made to disperse into the PS matrix. The as‐prepared γ‐Fe₂O₃ PS composite films, along with their additives, were subjected to characterization and study by X‐ray diffraction, scanning electron microscopy, thermal, IR, and dielectric measurement techniques. These studies showed monodisperse and chemically homogenous composite films with an increase in thermal behavior. An interesting self‐assembly of rod‐like nanoparticles of γ‐Fe₂O₃ particles into the polymer matrix, which formed spherical packets, was observed for the γ‐Fe₂O₃PS composite film. The electrical behavior of these films was interesting, as some showed conduction whereas others showed an increase in dielectric behavior. This nature was explained by the dielectric measurements. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 778–788, 2004     

In situ preparation and continuous fiber spinning of poly(p-phenylene benzobisoxazole) composites with oligo-hydroxyamide-functionalized multi-walled carbon nanotubes

A graft-from approach has been performed to achieve covalent functionalization of multi-walled carbon nanotubes (MWNTs) with oligo-hydroxyamide (oHA). Pristine MWNT was first oxidized to MWNT-COOH and then functionalized to MWNT-COCl by acyl chloride. MWNT-COCl was copolymerized with oHA to produce oHA-grafted MWNTs (MWNT-oHA). The thickness of the oHA shell in MWNT-oHA is about 7.5 nm. MWNT-oHA has a remarkable solubility in polar solvents and a good thermal stability because characteristic dehydrative ring closure occurs upon heating and forms a thermally more stable benzoxazole component. MWNT-oHA has been further covalently incorporated with a rigid-rod polymer matrix, poly(p-phenylene benzobisoxazole) (PBO), through in situ polymerization. Continuous PBO–MWNT composite fibers with different MWNT compositions have been fabricated using dry-jet wet-spinning technique. The structure and morphology of PBO–MWNT composite fibers have been characterized and their mechanical, thermal, conducting properties have been investigated. The tensile modulus, tensile strength, and thermal stability of PBO–MWNT composite fibers have been improved because of a good dispersion and high alignment of MWNTs in PBO as well as enhanced interfacial interaction between these two components. Furthermore, increased conductivity has been discovered in the PBO–MWNT composite films and the inner core of the composite fibers; however, not on the outer surface. The phenomena can be interpreted using percolation model together with the heterogeneous fiber morphology and nanotube distribution over the cross-section of the fiber.     

Effective reinforcement of carbon nanotubes in polypropylene matrices

This study describes an attempt to mechanically reinforce polypropylene (PP) using multi‐wall carbon nanotubes (MWNTs) through a melt compounding process followed by hot‐pressing and solid state drawing. The effect of a high density polyethylene (HDPE) coating on MWNTs and melt flow index (MFI) of PP on the dispersion of MWNTs and composite properties are studied by means of mechanical tests, transmission electron microscopy (TEM), scanning electron microscope (SEM), differential scanning calorimetry (DSC), and wide angle x‐ray diffraction (WAXD). Highly orientated composite tapes are prepared to fully utilize the properties of MWNTs in uniaxial direction. Highly aligned MWNTs are shown by SEM, while highly oriented polymer chains are characterized by WAXD. Composite theory is used to analysis the results and indicate that effective reinforcement of PP by MWNTs is highest at relatively low filler content and draw ratios. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of a polymer/multiwalled carbon nanotube composite and its application in the hydration of ethylene oxide

Multiwalled carbon nanotubes (MWNTs) were incorporated into the crosslinking network of a styrene–divinylbenzene copolymer (PS–DVB) via suspension polymerization. The prepared crosslinking PS–DVB with MWNTs was first treated with chloromethyl methyl ether to introduce chloromethyl groups through Friedel–Craft reaction; then, the chloromethylation product was reacted with trimethyl amine to obtain the target polymer/carbon nanotube composite: PS–DVB/MWNT ion‐exchange resin. The obtained composite was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, and X‐ray photoelectron spectroscopy. The results show the successful incorporation of MWNTs into the polymer network. The physical and chemical properties of the PS–DVB/MWNT ion‐exchange resin were nearly the same as those of the controlled sample. With its excellent antiswelling properties, the catalytic behavior of the polymer composite was examined in the hydration of ethylene oxide. Also, it demonstrated excellent stability as a catalyst without a decline in conversion and selectivity in a long‐time run. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010