Synthesis and characterization of novel aromatic polyamides derived from 2,2′‐bis(p‐phenoxyphenyl)‐4, 4′‐diaminodiphenyl ether

BACKGROUND: Wholly aromatic polyamides (aramids) are high‐performance polymeric materials with outstanding heat resistance and excellent chemical stabilities due to chain stiffness and intermolecular hydrogen bonding of amide groups. Synthesis of structurally well‐designed monomers is an effective strategy to prepare modified forms of these aramids to overcome lack of organo‐solubility and processability limitations. RESULTS: A novel class of wholly aromatic polyamides was prepared from a new diamine, namely 2,2′‐bis(p‐phenoxyphenyl)‐4,4′‐diaminodiphenyl ether (PPAPE), and two simple aromatic dicarboxylic acids. Two reference polyamides were also prepared by reacting 4,4′‐diaminodiphenyl ether with the same comonomers under similar conditions. M?_w and M?_n of the resultant polymers were 8.0 × 10⁴ and 5.5 × 10⁴ g mol^?1, respectively. Polymers resulting from PPAPE exhibited a nearly amorphous nature. These polyamides exhibited excellent organo‐solubility in a variety of polar solvents and possessed glass transition temperatures up to 200 °C. The 10% weight loss temperatures of these polymers were found to be up to 500 °C under a nitrogen atmosphere. The polymers obtained from PPAPE could be cast into transparent and flexible films from N,N‐dimethylacetamide solution. CONCLUSION: The results obtained show that the new PPAPE diamine can be considered as a good monomer to enhance the processability of its resultant aromatic polyamides while maintaining their high thermal stability. The observed characteristics of the polyamides obtained make them promising high‐performance polymeric materials. Copyright © 2009 Society of Chemical Industry     

Synthesis of aromatic poly(urea‐imide) with heterocyclic side‐chain structure

The poly(urea‐imide) copolymers with inherent viscosity of 0.81–1.08 dL/g were synthesized by reacting aryl ether diamine or its polyurea prepolymer with various diisocyanate‐terminated polyimide prepolymers. The aryl ether diamine was obtained by first nucleophilic substitution of phenolphthalein with p‐chloronitrobenzene in the presence of anhydrous potassium carbonate to form a dinitro aryl ether, and then further hydrogenated to diamine. The polyimide prepolymers were prepared by using 4,4′‐diphenylmethane diisocyanate to react with pyromellitic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride, or 3,3′,4,4′‐sulfonyldiphthalic anhydride by using the direct one‐pot method to improve their solubility, but without sacrificing thermal property. These copolymers are amorphous and readily soluble in a wide range of organic solvents such as N‐methyl‐2‐pyrrolidone, dimethylimidazole, N,N‐dimethylacetamide, dimethyl sulfoxide, N,N‐dimethylformamide, m‐cresol, and sulfolane. All the poly(urea‐imides) have glass transition temperatures in the range of 205–240°C and show a 10 wt % loss at 326–352°C in nitrogen and 324–350°C in air. The tensile strength, elongation at break, and initial modulus of these copolymer films range from 42 to 79 MPa, 5 to 16%, and 1.23 to 2.02 GPa, respectively. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1719–1730, 1999     

New poly(1,3,4‐oxadiazole)s bearing pentadecyl side chains: Synthesis and characterization

The 4‐[4′‐(Hydrazinocarbonyl)phenoxy]‐2‐pentadecylbenzohydrazide was polycondensed with aromatic diacid chlorides viz., terephthalic acid chloride (TPC), isophthalic acid chloride (IPC), and a mixture of TPC : IPC (50 : 50 mol %) to obtain polyhydrazides which on subsequent cyclodehydration reaction in the presence of phosphoryl chloride yielded new poly(1,3,4‐oxadiazole)s bearing flexibilizing ether linkages and pentadecyl side chains. Inherent viscosities of polyhydrazides and poly(1,3,4‐oxadiazole)s were in the range 0.53–0.66 dL g^?1 and 0.49–0.53 dL g^?1, respectively, indicating formation of medium to reasonably high molecular weight polymers. The number average molecular weights (M_n) and polydispersities (M_w/M_n) of poly(1,3,4‐oxadiazole)s were in the range 14,660–21,370 and 2.2–2.5, respectively. Polyhydrazides and poly(1,3,4‐oxadiazole)s were soluble in polar aprotic solvents such as N,N‐dimethylacetamide, 1‐methyl‐2‐pyrrolidinone, and N,N‐dimethylformamide. Furthermore, poly(1,3,4‐oxadiazole)s were also found to be soluble in solvents such as chloroform, dichloromethane, tetrahydrofuran, pyridine, and m‐cresol. Transparent, flexible, and tough films of polyhydrazides and poly(1,3,4‐oxadiazole)s could be cast from N,N‐dimethylacetamide and chloroform solutions, respectively. Both polyhydrazides and poly(1,3,4‐oxadiazole)s were amorphous in nature and formation of layered structure was observed due to packing of pentadecyl chains. A decrease in glass transition temperature was observed both in polyhydrazides (143–166°C) and poly(1,3,4‐oxadiazole)s (90–102°C) which could be ascribed to “internal plasticization” effect of pentadecyl chains. The T₁₀ values, obtained from TG curves, for poly(1,3,4‐oxadiazole)s were in the range of 433–449°C indicating their good thermal stability. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci 124:1281–1289, 2012     

Synthesis and properties of poly(arylene ether)s based on 3‐pentadecyl 4,4'‐biphenol

A new biphenol, 3‐pentadecyl 4,4′‐biphenol, was synthesized starting from 3‐pentadecylphenol and was polycondensed with 4,4′‐difluorobenzophenone, 1,3‐bis(4‐fluorobenzoyl)benzene and bis(4‐fluorophenyl)sulfone to obtain poly(arylene ether)s with biphenylene linkages in the backbone and pendent pentadecyl chains. Inherent viscosities and number‐average molecular weights (M_n) of the poly(arylene ether)s were in the range 0.50 ? 0.81 dL g^?1 and 2.2 × 10⁴ ? 8.3 × 10⁴, respectively. Detailed NMR spectroscopic studies of the poly(arylene ether)s indicated the presence of constitutional isomerism which existed because of the non‐symmetrical structure of 3‐pentadecyl 4,4′‐biphenol. The poly(arylene ether)s readily dissolved in common organic solvents such as dichloromethane, chloroform and tetrahydrofuran and could be cast into tough, transparent and flexible films from their chloroform solutions. The poly(arylene ether)s exhibited T_g values in the range 35–60 °C which are lower than that of reference poly(arylene ether)s without pentadecyl chains. The 10% decomposition temperatures (T₁₀) of the poly(arylene ether)s were in the range 410–455 °C indicating their good thermal stability. A gas permeation study of poly(ether sulfone) containing pendent pentadecyl chains revealed a moderate increase in permeability for helium, hydrogen and oxygen. However, there was a large increase in permeability for carbon dioxide which could be attributed to the internal plasticization effect of pendent pentadecyl chains. © 2016 Society of Chemical Industry     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

Polyamides obtained by direct polycondesation of 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl] fluoren‐9‐YL]‐2‐methyl‐phenoxy]aniline with dicarboxylic acids based on a diphenyl‐silane moiety

Polyamides (PAs) containing fluorene, oxyether, and diphenyl‐silane moieties in the repeating unit were synthesized in > 85% yield by direct polycondesation between a diamine and four dicarboxylic acids. Alternatively, one PA was synthesized from an acid dichloride. The diamine 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl]fluoren‐9‐yl]‐2‐methyl‐phenoxy]aniline ( 3 ) was obtained from the corresponding dinitro compound, which was synthesized by nucleophilic aromatic halogen displacement from p‐chloronitrobenzene and 9,9‐bis (4‐hydroxy‐3‐methyl‐phenyl)fluorene ( 1 ). Monomers and polymers were characterized by FTIR and ¹H, ¹³C, and ²⁹Si‐NMR spectroscopy and the results were in agreement with the proposed structures. PAs showed inherent viscosity values between 0.14 and 0.43 dL/g, indicative of low molecular weight species, probably of oligomeric nature. The glass transition temperature (T_g) values were observed in the 188–211°C range by DSC analysis. Thermal decomposition temperature (TDT_10%) values were above 400°C due to the presence of the aromatic rings in the diamine. All PAs showed good transparency in the visible region (>88% at 400 nm) due to the incorporation of the fluorene moiety. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and properties of MDI/H12MDI‐based water‐borne poly(urethane‐urea)s—Effects of MDI content and radiant exposure

Water‐borne poly(urethane‐urea)s (WBPUs) were prepared by a prepolymer mixing process using aromatic diisocyanate (MDI, 4,4′‐diphenylmethane diisocyanate)/aliphatic diisocyanate (H₁₂MDI, 4,4′‐methylenebis cyclohexyl isocyanate), polypropylene glycol (PPG, M_n = 1000), dimethylol propionic acid, and ethylene diamine as a chain extender, and triethylamine as a neutralizing agent. The effect of MDI on the molecular weight, chemical structure, dynamic thermo, and tensile properties of WBPUs was investigated. The yellowness index (YI, photo‐oxidation behavior) change of WBPUs under accelerated weathering exposure was also investigated. The WBPUs containing higher MDI content showed lower molecular weight, which verified the participation of some high reactive isocyanate groups of MDI into side reaction instead of chain growing reaction. As the MDI content increased, the storage modulus and tensile modulus/strength of WBPUs film increased, and their glass transitions of soft segments (T_gs) and hard segments (T_gh) were shifted to higher temperature. The intensity of tan δ peak of all three samples increased with increasing radiant exposure. The YI of H₁₂MDI‐based WBPU sample (WBPU‐0) was not occurred. The YI of WBPUs containing MDI increased with increasing MDI content and radiant exposure. However, the YI of sample WBPU‐25 containing 25 mol % of MDI at 11.3 MJ/m² (radiant exposure) was 6.6 which is a permissible level for exterior applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of poly(urethane)s based on diphenyl‐silane/germane and oxyphenyl units: Structure–properties relationship

A series of poly(urethane)s (PUs) based on diphenyl‐silane or ‐germane and oxyphenyl units were synthesized by polycondesation of 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl]fluoren‐9‐yl]‐2‐methyl‐phenoxy]aniline (3) and four bis(chloroformate)s ( I–IV ). These monomers were prepared and characterized in previous works. The best conditions for the polymerization reactions were investigated by a kinetic study. Also, a selection of the best solvent for the reaction was developed. Polymers were characterized by IR and ¹H, ¹³C, and ²⁹Si‐NMR spectroscopy and the results were in agreement with the proposed structures. Poly(urethane)s showed inherent viscosity values between 0.12 and 0.31 dL/g, indicative of low molecular weight species, probably of oligomeric nature. The glass transition temperature (T_g) values were observed in the 127–168°C range by DSC analysis. Thermal decomposition temperature (TDT_10%) values were above 300°C. All PUs showed good transparency in the visible region (>80% at 350 nm) due to the incorporation of the bulky monomer (fluorene) and oxyether linkages. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of poly(urethane‐ether)s from calcium salt of p‐hydroxybenzoic acid

The synthesis and characterization of calcium‐containing poly(urethane‐ether)s, having ionic links in the main chain, is reported. Calcium salt of p‐hydroxybenzoic acid (HBA‐Ca) was prepared from p‐hydroxybenzoic acid (HBA) and used as the chain extender in the preparation of calcium‐containing poly(urethane‐ether)s. Poly(urethane‐ether)s, having two different compositions, were prepared by varying the mole ratios of poly(tetramethylene glycol), hexamethylene diisocyanate, and HBA‐Ca. The synthesized poly(urethane‐ether)s were characterized by infrared spectroscopy, thermogravimetric analysis, and dynamic mechanical analysis. The presence of calcium in the polymer chain was confirmed by energy‐dispersive X‐ray analysis. The inherent viscosity of metal‐containing polymers decreased with the increase in the metal content of the polymer. The introduction of metal into the polymer lowers the thermal stability of the polymers as indicated by the decreased initial decomposition temperature. The glass transition temperature (T_g) and the storage modulus of the metal‐containing polymers increase with the increase in metal content presumably due to the formation of physical crosslink's in the polymer. From the mechanical studies of the polymer, it was observed that the metal‐containing polymers exhibit high tensile strength and modulus. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Synthesis and properties of new aromatic poly(ester‐imide)s derived from 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl) pyridine and various dihydroxy compounds

A novel class of wholly aromatic poly(ester‐imide)s, having a biphenylene pendant group, with inherent viscosities of 0.32–0.49 dL g^?1 was prepared by the diphenylchlorophosphate‐activated direct polyesterification of the preformed imide‐ring‐containing diacid, 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine (1) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A reference diacid, 2,6‐bis(trimellitimido)pyridine (2) without a biphenylene pendant group and two phenylene rings in the backbone, was also synthesized for comparison purposes. At first, with due attention to structural similarity and to compare the characterization data, a model compound (3) was synthesized by the reaction of compound 1 with two mole equivalents of phenol. Moreover, the optimum condition of polymerization reactions was obtained via a study of the model compound synthesis. All of the resulting polymers were characterized by Fourier transform infrared and ¹H NMR spectroscopy and elemental analysis. The ultraviolet λ_max values of the poly(ester‐imide)s were also determined. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, chloroform, tetrahydrofuran, and m‐cresol, as well as in polar organic solvents, such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The crystalline nature of the polymers obtained was evaluated by means of wide‐angle X‐ray diffraction. The resulting poly(ester‐imide)s showed nearly an amorphous nature, except poly(ester‐imide) derived from 4,4′‐dihydroxy biphenyl. The glass transition temperatures (T_g) of the polymers determined by differential scanning calorimetry thermograms were in the range 298–342 °C. The 10% weight loss temperatures (T_10%) from thermogravimetric analysis curves were found to be in the range 433–471 °C in nitrogen. Films of the polymers were also prepared by casting the solutions. Copyright © 2006 Society of Chemical Industry     

In situ FT‐IR‐ATR studies on the structure development of polyurethane‐urea systems

This article reports the application of Fourier Transform Infrared‐Attenuated Total Reflectance (FTIR‐ATR) technique for investigation of in situ polymerization of polyurethane‐urea elastomers. Formulations comprising of diisocyanates, a polyether diol and a diamine based chain extender have been used in this study. The diisocyanates used were 4,4′‐diphenylmethane diisocyanate and toluene diisocyanates. The polyether diol and diamine used were propyleneglycol block‐PEO‐b‐PPO and 4‐(4‐(2‐(4‐(4‐amino‐2‐(trifluoromethyl) phenoxy) phenyl) propan‐2‐yl) phenoxy)‐3‐(trifluoromethyl) benzeneamine, respectively. These reactants were mixed and placed on the ATR cell, and then the infrared spectra were recorded at an interval of 1.75 s while continuously heating. The polyurethane‐urea formation was monitored by the decay in the intensity of isocyanate band at 2258 to 2261 cm^?1. As the polymerization progressed, new peaks appeared at wavenumbers of 1711 cm^?1, 1697 cm^?1, and 1655 cm^?1. These peaks correspond to the urethane carbonyl, hydrogen bonded urethane, and urea carbonyl groups, respectively. It was found that with the progress of the reaction, the shift in the peaks at 1655 and 1697 cm^?1 occurs gradually. This shift in peaks is attributed to the hydrogen bonding. The hydrogen bonding and hence the shift in the peak is a cumulative effect of three phenomena namely: (1) degree of polymerization, (2) macro and microphase separation, and (3) temperature effect. A rationale is discussed to deconvolute these three effects. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies on thermoplastic polyurethanes based on new diphenylethane‐derivative diols. III. The effect of molecular weight and structure of soft segment on some properties of segmented polyurethanes

Two series of poly(ether urethane)s and one series of poly(ester urethane)s were synthesized, containing, respectively, poly(oxytetramethylene) diol (PTMO) of M _n = 1000 and 2000 and poly(ε‐caprolactone) diol of M _n = 2000 as soft segments. In each series the same hard segment, i.e., 4,4′‐(ethane‐1,2‐diyl)bis(benzenethiohexanol)/hexane‐1,6‐diyl diisocyanate, with different content (～ 14–72 wt %) was used. The polymers were prepared by a one‐step melt polymerization in the presence of dibutyltin dilaurate as a catalyst, at the molar ratio of NCO/OH = 1 (in the case of the polymers from PTMO of M _n = 1000 also at 1.05). For all polymers structures (by FTIR and X‐ray diffraction analysis) and physicochemical, thermal (by differential scanning calorimetry and thermogravimetric analysis), and tensile properties as well as Shore A/D hardness were determined. The resulting polymers were thermoplastic materials with partially crystalline structures (except the polymer with the highest content of PTMO of M _n = 2000). It was found that the poly(ether urethane)s showed lower crystallinity, glass‐transition temperature (T_g), and hardness as well as better thermal stability than the poly(ester urethane)s. Poly(ether urethane)s also exhibited higher tensile strength (up to 23.5 MPa vs. 20.3 MPa) and elongation at break (up to ～ 1950% vs. 1200%) in comparison with the corresponding poly(ester urethane)s. Among the poly(ether urethane)s an increase in soft‐segment length was accompanied by an increase in thermal stability, tensile strength, and elongation at break, as well as a decrease in T_g, crystallinity, and hardness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of organic soluble semicrystalline poly(aryl ether ketone)s copolymers containing phthalazinone moieties

A series of poly(aryl ether ketone)s (PAEK) copolymers containing phthalazinone moieties were synthesized by modest polycondensation reaction from 4‐(4‐hydroxyl‐phenyl)‐(2H)‐phthalazin‐1‐one (DHPZ), hydroquinone (HQ), and 1,4‐bis(4‐fluorobenzoyl)benzene (BFBB). The T_g values of these copolymers ranged from 168 to 235°C, and the crystalline melting temperatures varied from 285 to 352°C. By introducing phthalazinone moieties into the main chain, the solubility of these copolymers was improved in some common polar organic solvents, such as chloroform (CHCl₃), N‐methyl‐2‐pyrrolidinone (NMP), nitrobenzene (NB) and so on. The values of 5% weight loss temperatures were all higher than 510°C in nitrogen. The crystal structures of these copolymers were determined by wide‐angle X‐ray diffraction (WAXD), which revealed that they were semicrystalline in nature, and the crystal structure of these copolymers was orthorhombic, equal to poly(ether ether ketone ketone)s. As phthalazinone content in the backbone varied from 0 to 40 mol % (mole percent), the cell parameters of these copolymers including the a, b, and c axes lengths ranged from 7.76 to 7.99 Å, 6.00 to 6.14 Å, and 10.10 to 10.19 Å, respectively. The degree of crystallinity (via differential scanning calorimetry) decreased from 37.70% to 16.14% simultaneously. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1744–1753, 2007     

Highly enhanced accelerating effect of melt‐recrystallized stereocomplex crystallites on poly(L‐lactic acid) crystallization: effects of molecular weight of poly(D‐lactic acid)

The effects of the molecular weight of poly(D ‐lactic acid) (PDLA), which forms stereocomplex (SC) crystallites with poly(L ‐lactic acid) (PLLA), and those of processing temperature T_p on the acceleration (or nucleation) of PLLA homocrystallization were investigated using PLLA films containing 10 wt% PDLA with number‐average molecular weight (M_n) values of 5.47 × 10⁵, 9.67 × 10⁴ and 3.67 × 10⁴ g mol^–1 (PDLA‐H, PDLA‐M and PDLA‐L, respectively). For the PLLA/PDLA‐H and PLLA/PDLA‐M films, the SC crystallites that were ‘non’‐melted and those that were ‘completely’ melted at T_p values just above their endset melting temperature and recrystallized during cooling were found to act as effective accelerating (or nucleation) agents for PLLA homocrystallization. In contrast, SC crystallites formed from PDLA‐L, having the lowest M_n, were effective accelerating agents without any restrictions on T_p. In this case, the accelerating effects can be attributed to the plasticizer effect of PDLA‐L with the lowest M_n. The accelerating effects of SC crystallites in the PLLA/PDLA‐H and PLLA/PDLA‐M films was dependent on crystalline thickness for T_p values below the melting peak temperature of SC crystallites, whereas for T_p values above the melting peak temperature the accelerating effects are suggested to be affected by the interaction between the SC crystalline regions and PLLA amorphous regions.     

Thermally stable polyureas and poly(urea‐imide)s containing zinc and nickel napthtrien complexes

Two new napthtrien metal complexes, MNapth₂trien; where M = Zn and Ni, were synthesized and used for the synthesis of metal‐containing polyureas and poly(urea‐imide)s. MNapth₂trien underwent polymerization reaction with two diisocyanates, namely, 4,4′‐diphenylmethane diisocyanate and isophorone diisocyanate to yield polyureas. Poly(urea‐imide)s were obtained by the synthesis of metal‐containing isocyanate‐terminated polyurea prepolymers from the reaction between MNapth₂trien and excess diisocyanates, which could then undergo further reaction with different dianhydrides. The dianhydrides used were pyromellitic dianhydride and benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride. The polymers were characterized by infrared, nuclear magnetic resonance, elemental analysis, X‐ray diffraction, solubility, and viscosity. Glass transition temperature of the polymers was obtained from differential scanning calorimetry and dynamic mechanical thermal analysis. Thermal stability of polymers was studied by thermogravimetric analysis in air. It was found that the resulting metal‐containing polymers exhibited good thermal stability. Initial decomposition temperatures of the polymers depend on the amount of MNapth₂trien in the polymer composition. Char yields of metal‐containing poly(urea‐imide)s are higher than those of metal‐containing polyureas. Most metal‐containing polymers show good solubility in organic solvents. Shore D hardness test indicates that metal‐containing poly(urea‐imide)s are hard materials. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(arylene ether ketone) (S‐PAEK) block copolymers

A series of well‐defined poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(aryl ether ketone) (S‐PAEK) block copolymers of high molecular weights was prepared by direct nucleophilic polymerization of hydroquinone with sodium 5,5′‐carbonylbis(2‐fluorobenzene sulfonate) ( 1 ) and PEKK oligomer ( 2 ). Varying the ratio of 1 to 2 used in polymerization can be used to control the degree of polymer sulfonation, which correspondingly affects the polymer solubility in solvents. Increasing content of 1 in the copolymers, slightly decreases their thermal stability which is nevertheless thermally stable up to 400 °C. Two T_g values, or one broad T_g, were observed in the DSC measurements of the block copolymers, indicating the existence of phase separation, which was further proved by phase‐separated morphologies as shown in atomic force microscopy images. © 2001 Society of Chemical Industry     

Synthesis and characterization of inherently flame‐retardant and anti‐dripping thermoplastic poly(imides‐urethane)s

A series of thermoplastic poly(imide‐urethane)s (TPIUs), based on 4,4′‐diphenylmethane diisocyanate (MDI) and pyromellitic anhydride (PMDA) as hard segments and poly(tetrahydrofuran) (PTMG) as soft segments, has been prepared by a two‐step polymerization process. The objective of this study is to prepare a type of intrinsically flame‐retardant polyurethane by incorporating PMDA as a flame retardant in the main chains. The thermal behavior and flame retardancies of the TPIUs have been characterized by thermal gravimetric (TG) analysis and limiting oxygen index (LOI), UL‐94 vertical burning, cone calorimeter tests. The results indicate that the TPIUs display outstanding performance. The temperature at 5% mass loss (T_5%) and LOI value increase with the hard‐segment contents, while the total heat released (THR) and peak heat release rate (p‐HRR) show the opposite trend. Furthermore, the T_5% of TPIU211 (molar ratio: MDI : PTMG : PMDA = 2 : 1 : 1) is 33.2°C higher than that of the conventional thermoplastic polyurethane TPU211 (molar ratio: MDI : PTMG : 1,4‐butanediol = 2 : 1 : 1), and the THR and p‐HRR of TPIU211 are 14.62% and 64.02% lower than the respective parameters of TPU211. In addition, UL‐94 vertical burning tests show that the TPIUs exhibit excellent antidripping effects. The ultimate tensile strengths of the TPIUs reached 23.1?37.6 MPa with increasing hard segment contents, which meets the requirement of mechanical properties with regard to practical use. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40801.     

Synthesis and properties of fluorinated bis‐benzocyclobutene‐terminated arylene ether monomers

Four novel bis‐benzocyclobutene‐endcapped arylene ether monomers, 1,1′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐1‐phenyl‐2,2,2‐trifluoroethane (BOPP3FE), 1,1′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐1‐(3′,5′‐ditrifluoromethyl)phenyl‐2,2,2‐trifluoroethane(BOPP9FE), 2,2′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐1,1,1,3,3,3‐hexfluoropropane (BOP6FP), and 2,2′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐propane (BOPP) were prepared and characterized. All the four monomers showed similar curing behaviors under N₂ (Differential scanning calorimetry: extrapolated onset and peak temperatures at 225–229°C and 261–263°C) and demonstrated low and steady melt viscosities between 110 and 200°C, indicating their good processability. After cure, the resulting BCB resins exhibited high T_g (232–282°C) and excellent thermal stability (T_5% > 433°C). The resins also showed good mechanical properties with the flexural strengths of 68–88 MPa and the flexural modulus of 2.52–3.15 GPa. Moreover, the resins also exhibited low dielectric constants (2.58–2.88), low dissipation factors (2.7 to 8.4 × 10?4) and low water absorptions in boiling water for 24 h (0.29–0.59%). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of biodegradable poly(ester‐urethanes) based on bacterial poly(R‐3‐hydroxybutyrate)

A series of poly(R‐3‐hydroxybutyrate)/poly(ε‐caprolactone)/1,6‐hexamethylene diisocyanate‐segmented poly(ester‐urethanes), having different compositions and different block lengths, were synthesized by one‐step solution polymerization. The molecular weight of poly(R‐3‐hydroxybutyrate)‐diol, PHB‐diol, hard segments was in the range of 2100–4400 and poly(ε‐caprolactone)‐diol, PCL‐diol, soft segments in the range of 1080–5800. The materials obtained were investigated by using differential scanning calorimetry, wide angle X‐ray diffraction and mechanical measurements. All poly(ester‐urethanes) investigated were semicrystalline with T_m varying within 126–148°C. DSC results showed that T_g are shifted to higher temperature with increasing content of PHB hard segments and decreasing molecular weight of PCL soft segments. This indicates partial compatibility of the two phases. In poly(ester‐urethanes) made from PCL soft segments of molecular weight (M_n ≥ 2200), a PCL crystalline phase, in addition to the PHB crystalline phase, was observed. As for the mechanical tensile properties of poly(ester‐urethane) cast films, it was found that the ultimate strength and the elongation at the breakpoint decrease with increasing PHB hard segment content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 703–718, 2002