Microwave‐assisted synthesis and characterization of polyimide/functionalized MWCNT nanocomposites containing quinolyl moiety

Polyimide‐MWCNT nanocomposites were prepared by the reaction of a heterocyclic diamine monomer of bis(4‐amino‐3,5‐dimethylphenyl)‐2‐chloro‐3‐quinolylmethane (BACQM), pyromellitic dianhydride (PMDA) with unmodified MWCNT (MWCNT), acid‐functionalized MWCNT (acid‐MWCNT) or amine‐functionalized MWCNT (amine‐MWCNT) using microwave irradiation as well as by the conventional method. The structure of the monomer was confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectral techniques. The glass transition temperature (T_g) of the MWCNTs/polyimide nanocomposite was found to be higher than that of the unfilled polyimide system. The T_g's of both systems were higher when prepared with the microwave method than the conventional synthesis. The T_g's of the nanocomposites using acid and amine functionalized MWCNTs are greater than 300°C, in both methods. This is attributed to the presence of hydrogen bond and strong covalent bond in both the acid‐MWCNT/polyimide and amine‐MWCNT/polyimide systems. The morphological studies of the nanocomposites synthesized using microwave irradiation show that a distinct MWCNT nanofibrillar network is formed in the matrix when MWCNT or acid‐MWCNT is used. A homogeneous morphology, without distinct nanotube domains is seen when the amine‐MWCNT is covalently linked to the polymer. POLYM. COMPOS., 37:2417–2424, 2016. © 2015 Society of Plastics Engineers     

Encapsulation of palladium nanoparticles by multiwall carbon nanotubes‐graft‐poly(citric acid) hybrid materials

Citric acid was polymerized onto the surface of functionalized multiwall carbon nanotubes (MWCNT‐COOH) and MWCNT‐graft‐poly(citric acid) (MWCNT‐g‐PCA) hybrid materials were obtained. Due to the grafted poly(citric acid) branches, MWCNT‐g‐PCA hybrid materials not only were soluble in water but also were able to trap water soluble metal ions. Reduction of trapped metal ions in the polymeric shell of MWCNT‐g‐PCA hybrid materials by reducing agents such as sodium borohydride led to encapsulated metal nanoparticles on the surface of MWCNT. Herein palladium nanoparticles were encapsulated and transported by MWCNT‐g‐PCA hybrid materials (MWCNT‐g‐PCA‐EPN) and their application as nanocatalyst toward Heck reaction in different conditions was investigated. The catalytic activity of palladium ions supported by MWCNT‐g‐PCA hybrid materials (MWCNT‐g‐PCA‐PdCl₂) toward Heck reactions is much more than for MWCNT‐g‐PCA‐EPN. Structure, characteristics and catalytic activity of synthesized systems was investigated using spectroscopy and microscopy methods. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Hybridizing MWCNT with nano metal oxides and TiO2 in epoxy composites: Influence on mechanical and thermal performances

In this study, the effects of multi‐walled carbon nanotubes (MWCNT), and its hybrids with iron oxide (Fe₂O₃) and copper oxide (CuO) nanoparticles on mechanical characteristics and thermal properties of epoxy binder was evaluated. Furthermore, simultaneous effects of using MWCNT with TiO₂ as pigment and CaCO₃ as filler for epoxy composites were determined. To investigate effects of nano‐ and micro‐particles on epoxy matrix, the samples were evaluated by TGA and DTA. It was found that the hybrid of MWCNT with nano metal oxides caused considerable increment in the tensile and flexural properties of epoxy samples in comparison to the single MWCNT containing samples at the same filler contents. Significant improvement in the thermal conductivity of epoxy samples was obtained by using TiO₂ pigment along with MWCNT. The TiO₂ pigment also caused considerable improvement in mechanical properties of the epoxy matrix and the MWCNT containing nanocomposite. The best mechanical and thermal properties of epoxy nanocomposites were obtained at 1.5 wt % of MWCNT and 7 wt % of TiO₂ that it should be attributed to particle network forming of the particles which cause better nano/micro dispersion and properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43834.     

Synthesis and characterization of polyaniline derivative and silver nanoparticle composites

BACKGROUND: There has been a recent surge of interest in the synthesis and applications of electroactive polymers with incorporated metal nanoparticles. These hybrid systems are expected to display synergistic properties between the conjugated polymers and the metal nanoparticles, making them potential candidates for applications in sensors and electronic devices. RESULTS: Composites of polyaniline derivatives—polyaniline, poly(2,5‐dimethoxyaniline) and poly(aniline‐2,5‐dimethoxyaniline)—and silver nanoparticles were prepared through simultaneous polymerization of aniline derivative and reduction of AgNO₃ in the presence of poly(styrene sulfonic acid) (PSS). We used AgNO₃ as one of the initial components (1) to form the silver nanoparticles and (2) as an oxidizing agent for initiation of the polymerization reaction. UV‐visible spectra of the synthesized nanocomposites reveal the synchronized formation of silver nanoparticles and polymer matrix. The morphology of the silver nanoparticles and degree of their dispersion in the nanocomposites were characterized by transmission electron microscopy. Thermogravimetric analysis and differential scanning calorimetry results indicate an enhancement of the thermal stability of the nanocomposites compared to the pure polymers. The electrical conductivity of the nanocomposites is in the range 10^?4 to 10^?2 S cm^?1. CONCLUSION: A single‐step process for the synthesis of silver nanoparticle–polyaniline derivative nanocomposites doped with PSS has been demonstrated. The approach in which silver nanoparticles are formed simultaneously during the polymerization process results in a good dispersion of the nanoparticles in the conductive polymer matrix. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of (Fe3O4/MWCNTs)/ epoxy nanocomposites

A sonochemical technique is used for in situ coating of iron oxide (Fe₃O₄) nanoparticles on outer surface of MWCNTs. These Fe₃O₄/MWCNTs were characterized using a high‐resolution transmission electron microscope (HRTEM), X‐ray diffraction, and thermogravimetric analysis. The as‐prepared Fe₃O₄/MWCNTs composite nanoparticles were further used as reinforcing fillers in epoxy‐based resin (Epon‐828). The nanocomposites of epoxy were prepared by infusion of (0.5 and 1.0 wt %) pristine MWCNTs and Fe₃O₄/MWCNTs composite nanoparticles. For comparison purposes, the neat epoxy resin was also prepared in the same procedure as the nanocomposites, only without nanoparticles. The thermal, mechanical, and morphological tests were carried out for neat and nanocomposites. The compression test results show that the highest improvements in compressive modulus (38%) and strength (8%) were observed for 0.5 wt % loading of Fe₃O₄/MWCNTs. HRTEM results show the uniform dispersion of Fe₃O₄/MWCNTs nanoparticles in epoxy when compared with the dispersion of MWCNTs. These Fe₃O₄/MWCNTs nanoparticles‐infused epoxy nanocomposite shows an increase in glass transition (T_g) temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of novel silver/L‐phenylalanine‐based optically active polyacrylate nanocomposite

Novel bioactive and optically active poly(N‐acryloyl‐L ‐phenylalanine) (PAPA) was synthesized by atom transfer radical polymerization. PAPA‐silver (Ag) nanocomposites have been successfully prepared via in situ reducing Ag⁺ ions anchored in the polymer chain using hydrazine hydrate as reducing agent in an aqueous medium. By controlling of the amount of Ag⁺ ions introduced, we have produced an organic/inorganic nanocomposite containing Ag nanoparticles with well controlled size. Nanocomposites were characterized by X‐ray diffraction (XRD), UV–Vis spectrophotometry, transmission electron microscopy, and Fourier transform infrared. XRD pattern showed presence of Ag nanoparticles. The PAPA/Ag nanocomposites with 1 : 10 silver nitrate (AgNO₃) : PAPA ratio revealed the presence of well‐dispersed Ag nanoparticles in the polymer matrix. All of these Ag nanoparticles formed are spherical and more than 80% of them are in the range of 15–25 nm. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Dielectric properties of multiwalled carbon nanotube/clay/polyvinylidene fluoride nanocomposites: Effect of clay incorporation

This study investigates the effect of clay addition on the broadband dielectric properties of multi‐walled carbon nanotube/polyvinylidene fluoride (MWCNT/PVDF) composites, that is, frequency range of 10¹−10⁶ Hz. Different loadings of MWCNT and clay were used for the preparation of three‐phase (MWCNT/Clay/PVDF) nanocomposites via melt‐mixing method. The crystalline structure and morphology of nanocomposites were examined by employing characterization techniques such as X‐ray diffraction, transmission electron microscopy, and differential scanning calorimetry. The dielectric spectroscopy showed that introducing clay into the MWCNT/PVDF nanocomposites at a critical MWCNT concentration improved dielectric properties tremendously. It was interestingly observed that the incorporation of a specific amount of clay, that is, 1.0 wt%, into the (MWCNT/PVDF) nanocomposite at a critical MWCNT loading, that is, 0.5 wt% MWCNT, resulted in a huge increase in the dielectric permittivity (670% at 100 Hz) and a considerable reduction in the dissipation factor (68% at 100 Hz). POLYM. COMPOS., 161–167, 2016. © 2014 Society of Plastics Engineers     

Low percolation threshold and high electrical conductivity in melt‐blended polycarbonate/multiwall carbon nanotube nanocomposites in the presence of poly(ε‐caprolactone)

This study focuses on the electrical properties of polycarbonate (PC)/poly(ε‐caprolactone) (PCL)‐multiwall carbon nanotube (MWCNT) nanocomposites. MWCNTs were incorporated into thermoplastic PC matrix by simple melt blending using biodegradable PCL based concentrates with MWCNT loadings (3.5 wt%). Because of the lower interfacial energy between MWCNT and PCL, the nanotubes remain in their excellent dispersion state into matrix polymer. Thus, electrical percolation in PC/PCL‐MWCNT nanocomposites was obtained at lower MWCNT loading rather than direct incorporation of MWCNT into PC matrix. AC and DC electrical conductivity of miscible PC/PCL‐MWCNT nanocomposites were studied in a broad frequency range, 10¹?10⁶ Hz and resulted in low percolation threshold (p_c) of 0.14 wt%, and the critical exponent (t) of 2.09 from the scaling law equation. The plot of logσ_DC versus p^?1/3 showed linear variation and indicated the existence of tunneling conduction among MWCNTs. At low MWCNT loading, the influence of large polymeric gaps between conducting clusters is the reason for the frequency dependent electrical conductivity. Transmission electron microscopy and field emission scanning electron microscopy showed that MWCNTs were homogeneously dispersed and developed a continuous interconnected network path throughout the matrix phase and miscibility behavior of the polymer blend. POLYM. ENG. SCI., 54:646–659, 2014. © 2013 Society of Plastics Engineers     

Structure and properties of melt‐spun PET/MWCNT nanocomposite fibers

Polyethylene terephthalate (PET) melt‐spun fibers were modified with multiwall carbon nanotubes (MWCNT) to obtain conductive microfibers smaller than 90 μm in diameter. Physical properties such as crystallinity and orientation of as‐spun fibers were studied by X‐ray diffraction, Raman spectroscopy, and microscopy techniques at different draw ratios (DR) and MWCNT concentrations. Morphological and orientation analysis of MWCNT after melt‐spinning process showed agglomerates formation and highly oriented CNTs. The study of the orientation of PET crystalline phase in drawn fibers proved that the addition of nanoparticles decreases the orientation of crystalline units inside the fibers. The orientation of MWCNT as well as that of PET chains was studied using Raman spectroscopy at different DR and a high degree of CNT orientation was observed under high DR conditions. Mechanical and electrical properties of as‐spun fibers were also investigated. Our results showed that it was possible to achieve conductive fibers at a MWCNT concentration of 2% w/w, and more conductive fibers using higher DR were also obtained without increasing the MWCNT concentration. Mechanical properties results showed interestingly high value of maximum tensile strain at break (ε_max) of nanocomposite fibers, up to three times more than pure PET fibers. POLYM. ENG. SCI., 50:1956–1968, 2010. © 2010 Society of Plastics Engineers     

Synergistic effect of carbon nanofiber decorated with iron oxide in enhancing properties of styrene butadiene rubber nanocomposites

Elastomer nanocomposites reinforced with carbon nanofiber (CNF) decorated with metal nanoparticles exhibit excellent thermal, mechanical, and magnetic properties with low volume fraction of the reinforcement. Generally, metal nanoparticles are used to modify the surface of CNF, to improve their dispersion and contact resistance in the polymer matrix. In this study, Fe₂O₃ metal nanoparticles were decorated on CNF by electrostatic attraction via a green and facile solution‐based method. Interestingly, the CNF decorated with Fe₂O₃ (CNF‐Fe₂O₃)/elastomer improved both the tensile strength and the fatigue property of plain CNF/elastomer by as much as 57.2% and 27.2%, respectively. Moreover, the CNF‐Fe₂O₃/elastomer exhibited superior thermal conductivity, a twofold enhancement compared with carbon fibers. The elastomer nanocomposites consisting of CNF‐Fe₂O₃ also exhibited enhanced magnetic properties due to synergies between the Fe₂O₃ nanoparticles and the CNF. The elastomer nanocomposites prepared with CNF‐Fe₂O₃ will open significant new opportunities for preparing advanced elastomer nanocomposites for future engineering applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45376.     

Matrix tacticity controlled tuning of microstructure,constitutive behavior and rheological percolation effect of melt‐mixed amino‐functionalized MWCNT/PP nanocomposites

Amino‐functionalized multi walled nanotube (MWCNT‐NH₂) filled isotactic PP and isotactic‐syndiotactic (70:30) mixed PP based melt‐mixed nanocomposites have been comparatively evaluated with regard to morphological, rheological and thermo‐mechanical properties. The ratio of mean free space lengths (L_f) to infiltrated mean free space lengths (L_inf) between nanotubes in isotactic‐syndiotactic (70:30) blended matrix based nanocomposites increased relatively indicating a dispersed‐morphology. The rheological percolation threshold increased up to a higher extent of MWCNT‐NH₂ loading (from ø_c ～ 2.3 × 10^?4 in isotactic to ø_c ～ 11 × 10^?4 in iso‐syndio blend) accompanied with the formation of a mechanically responsive network structure. van‐GurpPalmen plot showed a transition in the rheological response as a consequence of network morphology getting shifted to higher concentration of MWCNT‐NH₂ in the isotactic‐syndiotactic mixed PP based nanocomposites than in the isotactic based one. Constitutive modeling of complex viscosity response of the nanocomposites led to functional correlation between the percolation and relaxation dynamics of polymer chains. POLYM. ENG. SCI., 58:1115–1126, 2018. © 2017 Society of Plastics Engineers     

Conjugated polymer mediated synthesis of nanoparticle clusters and core/shell nanoparticles

Two water soluble conjugated polymers, poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and ammonium ion stabilized poly(phenylene vinylene) (P2), are found to be able to reduce noble metal ions to zero-valent metals via a direct chemical deposition technique. Au nanoparticle clusters can be obtained through reduction of Au³⁺ ions by PEDOT:PSS and the electronic coupling between them can be controlled by HAuCl₄ concentration. Core/shell Ag/polymer nanostructures are prepared from reduction of Ag⁺ ions by P2, which have a ppb detection limit for 4-MBA using surface-enhanced Raman spectroscopy (SERS). This conjugated polymer mediated synthesis of metal nanoparticles may open a new avenue for fabricating nanomaterials and nanocomposites with tunable optical properties that are dominated by their structure and electronic coupling between nanoparticles.     

Mechanical and thermal properties of bio‐based CaCO3/soybean‐based hybrid unsaturated polyester nanocomposites

Bio‐based calcium carbonate nanoparticles (CaCO₃) were synthesized via size reduction of eggshell powder using mechanical attrition followed by high intensity ultrasonic irradiation. The transmission electron microscopic (TEM) and BET surface area measurements show that these particles are less than 10 nm in size and a surface area of ～44 m²/g. Bio‐based nanocomposites were fabricated by infusion of different weight fractions of as‐prepared CaCO₃ nanoparticles into Polylite® 31325‐00 resin system using a non‐contact Thinky® mixing method. As‐prepared bio‐nanocomposites were characterized for their thermal and mechanical properties. TEM studies showed that the particles were well dispersed over the entire volume of the matrix. Thermal analyses indicated that the bio‐nanocomposites are thermally more stable than the corresponding neat systems. Nanocomposite with 2% by weight loading of bio‐CaCO₃ nanoparticles exhibited an 18°C increase in the glass transition temperature over the neat Polylite 31325 system. Mechanical tests have been carried out for both bio‐nanocomposites and neat resin systems. The compression test results of the 2% Bio‐CaCO₃/Polylite 31325 nanocomposite showed an improvement of 14% and 27% in compressive strength and modulus respectively compared with the neat system. Details of the fabrication procedure and thermal and mechanical characterizations are presented in this article. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1442–1452, 2013     

Synthesis of hybrid nanocomposites based on new triazeno copolymers and montmorillonite used for detecting metal ions

The modern synthesis of novel functional materials with improved properties includes that of hybrid nanocomposites composed of inorganic nanoparticles and organic derivatives, where controlling the molecular structure at atomic and macroscopic dimensions is a key factor, with a major effect on performance. An extension of this approach to the field of nanocomposites containing photopolymers with triazene groups attached on a methacrylic backbone could be of great interest in the future development of chemosensors and photoresists, among others. Photopolymer/clay nanocomposites were prepared by in situ free radical copolymerization of 1‐(phenyl)‐3‐(2‐methacryloyloxyethylcarbamoyloxyethyl)‐3‐methyltriazene‐1 or 1‐(p‐methoxyphenyl)‐3‐(2‐methacryloyloxyethylcarbamoyloxyethyl)‐3‐methyltriazene‐1 and vinyl acetate or styrene in solution and in the presence of 3 and 5 wt% of organically modified montmorillonite. The characterization of the nanocomposites and pure copolymers was achieved through ¹H NMR and Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, X‐ray diffraction, atomic force microscopy and fluorescence analysis. The morphologies and properties of the nanocomposites are dependent on the nature of the triazene, on the co‐monomer structure and on the organoclay content. Also, the fluorescence response of these nanocomposites towards certain metal ions (Fe³⁺, Cu²⁺, Hg²⁺, Ni²⁺) in dimethylformamide solution was investigated. The effect of uranyl ions on the fluorescence intensity of the nanocomposites in solution or as films could be exploited in the development of ‘turn‐off’ or ‘turn‐on’ chemosensors for this type of analyte. Triazeno copolymer/organophilic montmorillonite nanocomposites with exfoliated (not completely exfoliated) or exfoliated and intercalated structures exhibit distinct characteristics concerning their fluorescence behaviour, a higher sensing ability towards certain target compounds (Fe³⁺, UO₂²⁺) being evidenced for those incorporating 3 wt% organoclay in solution and as films. Copyright © 2010 Society of Chemical Industry     

TiO2‐Oligoaldaramide nanocomposites as efficient core‐shell systems for wood preservation

Homogeneous core‐shell systems were obtained with a growth, in controlled steps, of several oligoamides on TiO₂ nanoparticles. Derivatives of natural compounds, such as l ‐tartaric acid and α,α′‐trehalose, were used as diesters in the polycondensation reactions with ethylenediamine. TiO₂ anatase was chosen because of its high photo‐activity and its antimicrobial activity. The TiO₂ nanoparticles had been previously activated then functionalized using two different coupling agents, and finally, the TiO₂‐oligoamide nanocomposites were synthesized using two synthetic pathways. The final products were characterized by ¹H NMR, ¹³C NMR, FT‐IR, and transmission electron microscope. These nanocomposites can show improved properties in comparison with the single components (TiO₂ nanoparticles or oligoamides), which are useful in many fields, such as antimicrobial coatings for surfaces in cultural heritage conservation. A nanocomposite (TiO₂‐polyethylenetartaramide) was used for applicative studies, and it has shown a good efficacy against fungal attack by Trametes versicolor on wood specimens (Fagus sylvatica). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42047.     

Enhancement of dispersion of carbon nanotube and physical properties of poly(styrene‐co‐acrylonitrile)/multiwalled carbon nanotube nanocomposite via surface initiated ATRP

Dispersion behavior of multiwalled carbon nanotube (MWCNT), rheological and mechanical properties of various MWCNT/poly(styrene‐co‐acrylonitrile) (SAN) nanocomposites were investigated. MWCNT/SAN nanocomposites were prepared by three different methods; MWCNT/SAN melt blending, MWCNT/SAN in situ atom transfer radical polymerization (ATRP) and functionalized‐MWCNT/SAN in situ ATRP. Formation of SAN onto the surface of MWCNT and the molecular weight of grafted‐SAN were confirmed by fourier transform infrared spectra, ¹H‐NMR and ¹³C‐NMR. Crossover frequency of storage and loss modulus from rheological measurement and dynamic mechanical analysis showed that functionalized MWCNT/SAN in situ ATRP nanocomposite showed more uniform dispersion of MWCNT. Improved mechanical and electrical properties were observed for functionalized MWCNT/SAN in situ ATRP nanocomposite. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A Novel Approach to Prepare Poly(Vinyl Acetate)/Ag Nanocomposite for Effective Antimicrobial Coating Applications

Polyvinyl acetate nanocomposites were successfully prepared based on silver nanoparticles. First, silver nanoparticles were directly prepared during the in situ emulsion polymerization of vinyl acetate monomer using AgNO₃ as a source of Ag⁺ ions and poly(vinyl alcohol) was used for dual functions as emulsifier for emulsion polymerization and as a stabilizing agent, trisodium citrate (C₆H₅O₇Na₃) was used as reducing agent for Ag⁺ ions during the polymerization process. The prepared polyvinyl acetate/Ag nanocomposites were assessed using X-ray diffraction, scanning electron microscopy, Fourier transform infrared, transmission electron microscopy, and ultraviolet spectra. The antibacterial properties of the prepared polyvinyl acetate/Ag nanocomposites were investigated as antimicrobial activity against pathogenic bacteria, i.e., Staphylococcus aureus (G^+ve bacteria) and Escherichia coli (G^?ve bacteria). These polyvinyl acetate nanocomposites could be used as a promising material for enhanced and continuous antibacterial applications as coating and packaging materials.     

Synthesis and antimicrobial activity of the Schiff base from polyoxyalkylene‐montmorillonite nanocomposites and aldehydes

Vanillin (4‐hydroxy‐3‐methoxy benzaldehyde) and 5‐formylamino salicylic acid microbicides were reacted with polyoxyalkylene‐montmorillonite (D_230–2000‐MMT) nanocomposites. The microstructure of these Schiff base nanocomposites was characterized by TEM and XRD. D_230–2000‐MMT nanocomposites were prepared by an ion exchange process of sodium montmorillonite (Na‐MMT) and NH₃ ⁺ groups in polyoxyalkylene amine hydrochloride with three different molecular masses of D₂₃₀, D₄₀₀, and D₂₀₀₀. Wide‐angle X‐ray diffraction confirms the intercalation of the polymer between the silicate layers. Electrostatic interaction between the positively charged NH₃ ⁺ groups and the negatively charged surface of MMT was observed. The nanocomposites were tested for antimicrobial activity against the Gram‐negative bacteria (Escherichia coli NCIM 2065), Gram‐positive bacteria (Bacillus subtillus ATCC), and fungi (Candida albicans SC5314 and Cryptococcus neoformans). The D₂₀₀₀‐MMT/vanillin Schiff base nanocomposite strongly inhibited the growth of all microorganisms that can be used in different applications. The amount of loaded polymer and the structure of the nanocomposite play an important role in inhibiting the bacterial and fungal strains. It is found that the Schiff base nanocomposite affect the morphology, oxygen consumption, and the release of cytoplasmic constituents such as potassium (K⁺), sodium (Na⁺), and calcium (Ca²⁺) ions leading to death of the cells. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Modeling of chemical kinetics of elastomer/hydroxyl‐ and carboxyl‐functionalized multiwalled carbon nanotubes nanocomposites' cross‐linking

Several kinds of (hydrogenated) nitrile elastomer ((H)NBR) compounds were prepared by melt compounding of rubbers with carbon nanotubes. Transmission electron microscopy (TEM) showed that the exfoliation degree of nanotubes was high. Multiwalled carbon nanotubes (MWCNT) were either neat or modified by hydroxyl or carboxyl groups. Morphology was also characterized by scanning electron microscopy (SEM). The cure kinetics of (H)NBR and modified multiwalled carbon nanotubes ((m‐)MWCNT/(H)NBR) nanocomposites was studied. It was found that the apparent curing and over‐cure activation energies (E_A and E_A,1) increased with the increasing amount of (m‐)MWCNT. There was a less obvious change in the apparent orders of curing reactions. The results of n‐th order and autocatalytic kinetic model showed that any studied content of (m‐)MWCNT could increase effective thermal conductivity, but decreased the vulcanization rate of (m‐)MWCNT/(H)NBR nanocomposites. Finally, the effect of (m‐)MWCNT content and functionalization on tensile mechanical properties was presented. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Comparative study of gamma and ion beam irradiation of polymeric nanocomposite on electrical conductivity

Poly(vinyl alcohol) (PVA) was used to prepare nanocomposites of multi‐wall carbon nanotubes (MWCNT) and functionalized carbon nanotubes (MWCNT‐NH₂) in existence of 2‐carboxyethyl acrylate oligomers (CEA). Radiation‐induced crosslinking of the prepared matrix was carried out via gamma and ion beam irradiation. A comparative study of gamma and ion beam irradiation effect on the electrical conductivity of nanocomposite was conducted. The gelation of the gamma irradiated matrix outperforms the ion beam irradiated matrix. The order of gelation is PVA > (PVA/CEA) > (PVA/CEA)‐MWCNT > (PVA/CEA)‐MWCNT‐NH₂. There is a significant reduction in the swelling of the nanocomposite. The formation of nanocomposites was confirmed by scanning electron microscopy, energy‐dispersive X‐ray (EDX) and FTIR examinations. The direct current electrical properties of PVA/nanocomposites are examined at room temperature by applying electric voltage from 1 to 20 V. The results revealed that the electrical conductivity is increased by adding the carbon nanotubes and irradiation by gamma and ion beam. At an applied electric voltage 20 V, in the electrical conductivity of the unirradiated PVA was from 9.20 × 10^?8 S cm^?1. After adding MWCNT an increase up to 4.70 × 10^?5 S cm^?1 was observed. While after ion beam irradiation, a further increase up to 9.30 × 10^?5 S cm^?1 was noticed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46146.