Synthesis and characterization of novel urethane‐siloxane copolymers with a high content of PCL‐PDMS‐PCL segments

Novel polyurethane copolymers derived from 4,4′‐methylenediphenyl diisocyanate (MDI), 1,4‐butanediol (BD) and α,ω‐dihydroxy‐[poly(caprolactone)‐poly (dimethylsiloxane)‐poly(caprolactone)] (α,ω‐dihydroxy‐(PCL‐PDMS‐PCL); = 6100 g mol^?1) were synthesized by a two‐step polyaddition reaction in solution. In the synthesis of the polyurethanes, the PCL blocks served as a compatibilizer between the nonpolar PDMS blocks and the polar comonomers, MDI and BD. The synthesis of thermoplastic polyurethanes (TPU) with high soft segment contents was optimized in terms of the concentrations of the reactants, the molar ratio of the NCO/OH groups, and the time and temperature of the polyaddition reaction. The structure, composition, and hard MDI/BD segment length of the synthesized polyurethane copolymers were determined by ¹H, ¹³C‐NMR, and two‐dimensional correlation (COSY, HSQC, and HMBC) spectroscopy, while the hydrogen bonding interactions in the copolymers were analyzed by FT‐IR spectroscopy. The influence of the reaction conditions on the structure, molecular weight, thermal, and some physical properties was studied at constant composition of the reaction mixture. A change in the molar ratio of the NCO/OH groups and the reaction conditions modified not only the molecular weight of the synthesized polyurethanes, but also the microstructure and therefore the thermal and physical properties of the copolymers. It was demonstrated that only PCL segments with high soft segment contents crystallize, thereby showing spherulitic morphology. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Stereocomplex formation between enantiomeric PLA–PEG–PLA triblock copolymers: Characterization and use as protein‐delivery microparticulate carriers

Two enantiomeric triblock ABA copolymers composed of poly(L ‐lactide)–poly(ethylene glycol)–poly(L ‐lactide) (PLLA–PEG–PLLA) and poly(D ‐lactide)–poly(ethylene glycol)–poly(D ‐lactide) (PDLA–PEG–PDLA) were synthesized with two different middle‐block PEG chain lengths by ring‐opening polymerization of L ‐lactide and D ‐lactide in the presence of PEG, respectively. A pair of enantiomeric triblock copolymers were combined to form a stereocomplex by a solvent‐casting method. The triblock copolymers and their stereocomplexes were characterized by ¹H‐ and ¹³C‐NMR spectroscopy and gel permeation chromatography. Their crystalline structures and crystalline melting behaviors were analyzed by the wide‐angle X‐ray diffraction method and differential scanning calorimetry. The stereocomplex formed between a pair of enantiomeric triblock copolymers exhibited a higher crystalline melting temperature with a distinctive 3/1 helical crystalline structure. PLLA–PEG–PLLA and its stereocomplex with PDLA–PEG–PDLA were used to fabricate a series of microspheres encapsulating a model protein drug, bovine serum albumin (BSA). They were prepared by a double‐emulsion solvent‐evaporation method. The morphological aspects of the microspheres were characterized and BSA release profiles from them were investigated. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1615–1623, 2000     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006     

Synthesis and characterization of poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol) block copolymers prepared by a salicylaldimine‐aluminum complex

A series of poly(?‐caprolactone)‐b‐poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights were synthesized with a salicylaldimine‐aluminum complex in the presence of monomethoxy poly(ethylene glycol). The block copolymers were characterized by ¹H NMR, GPC, WAXD, and DSC. The ¹H NMR and GPC results verify the block structure and narrow molecular weight distribution of the block copolymers. WAXD and DSC results show that crystallization behavior of the block copolymers varies with the composition. When the PCL block is extremely short, only the PEG block is crystallizable. With further increase in the length of the PCL block, both blocks can crystallize. The PCL crystallizes prior to the PEG block and has a stronger suppression effect on crystallization of the PEG block, while the PEG block only exerts a relatively weak adverse effect on crystallization of the PCL block. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Miscibility of block copolymers of poly(ε‐caprolactone) and poly(ethylene glycol) with poly(3‐hydroxybutyrate) as well as the compatibilizing effect of these copolymers in blends of poly(ε‐caprolactone) and poly(3‐hydroxybutyrate)

Atactic poly(3‐hydroxybutyrate) (a‐PHB) and block copolymers of poly(ethylene glycol) (PEG) with poly(ε‐caprolactone) (PCL‐b‐PEG) were synthesized through anionic polymerization and coordination polymerization, respectively. As demonstrated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) measurements, both chemosynthesized a‐PHB and biosynthesized isotactic PHB (i‐PHB) are miscible with the PEG segment phase of PCL‐b‐PEGs. However, there is no evidence showing miscibility between both PHBs and the PCL segment phase of the copolymer even though PCL has been block‐copolymerized with PEG. Based on these results, PCL‐b‐PEG was added, as a compatibilizer, to both the PCL/a‐PHB blends and the PCL i‐PHB blends. The blend films were obtained through the evaporation of chloroform solutions of mixed components. Excitingly, the improvement in mechanical properties of PCL/PHB blends was achieved as anticipated initially upon the addition of PCL‐b‐PEG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2600–2608, 2001     

Biodegradable polylactide/poly(ethylene glycol)/polylactide triblock copolymer micelles as anticancer drug carriers

Adriamycin (ADR) was selected as a model drug to evaluate the potential applications of polylactide/poly(ethylene glycol)/polylactide (PLA/PEG/PLA) micelles as drug carriers in parenteral delivery systems. The PLA/PEG/PLA triblock copolymer micelles were characterized by dynamic light scattering and transmission electron microscopy. It was found that the micelle size increased with the increasing of the PLA chain length. The average size of ADR‐loaded micelles was 143.2 nm. The histogram analysis showed that the ADR‐loaded micelles possessed a narrow unimodal size distribution. The ADR loading contents of the micelles and ADR entrapment efficiency were dependent on the PLA chain length and PEG chain length in the copolymer. They increased with the increase of the PLA chain length, but the PEG chain length was identical and decreased with the increase of the PEG chain length; the length of the PLA block was similar. The initial amount of ADR also influenced the drug contents and entrapment efficiency (i.e., the more the initial amount added, the more the drug contents and the higher encapsulation efficiency). The drug release experiments indicated that the ADR‐loaded micelles possessed sustained release characteristics. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1976–1982, 2001     

Synthesis,characterization, and hydrolytic degradation of biodegradable poly(ether ester)‐urethane copolymers based on ε‐caprolactone and poly(ethylene glycol)

In this article, a new kind of biodegradable poly(ε‐caprolactone)‐poly(ethylene glycol)‐poly(ε‐caprolactone)‐based polyurethane (PCEC‐U) copolymers were successfully synthesized by melt‐polycondensation method from ε‐caprolactone (ε‐CL), poly(ethylene glycol) (PEG), 1,4‐butanediol (BD), and isophorone diisocyanate (IPDI). The obtained copolymers were characterized by ¹H‐nuclear magnetic resonance (¹H‐NMR), FTIR, and gel permeation chromatography (GPC). Thermal properties of PCEC‐U copolymers were studied by DSC and TGA/DTG under nitrogen atmosphere. Water absorption and hydrolytic degradation behavior of these copolymers were also investigated. Hydrolytic degradation behavior was studied by weight loss method. ¹H‐NMR and GPC were also used to characterize the hydrolytic degradation behavior of PCEC‐U copolymers. The molecular weight of PCL block and PEG block in soft segment and the content of hard segment strongly affected the water absorption and hydrolytic degradation behavior of PCEC‐U copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Linear‐dendritic ABA triblock copolymers as nanocarriers

Linear‐dendritic ABA triblock copolymers containing PEG were used for transport the small guest molecules such as 5,7‐dibromo‐8‐hydoxy quinoline, ibuprofen, and Congo red. Nanocarriers containing guest molecules were soluble in water and in some of the organic solvents. Encapsulated guest molecules were soluble in some of the solvents, which they cannot be solved in them solely, for example, chloroform is a very poor solvent for Congo red, but encapsulated Congo red by nanocarriers is soluble in chloroform. The linear‐dendritic copolymers/guest molecule complexes were stable at room temperature for about 10 months; during this time, guest molecules did not release from linear‐dendritic copolymers/guest molecule complexes. The controlled release of guest molecules from linear‐dendritic copolymers/guest molecule complexes in vitro conditions also was investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 267–272, 2007     

Synthesis and characterization of fullerene grafted poly(ε‐caprolactone)

The fullerene grafted poly(ε‐caprolactone) (PCL) was successfully synthesized with a graft efficiency of 80%. The fullerene moieties grafted onto the PCL chain aggregate into 1–2 μm particles so that a physical pseudo‐network is formed. Because of the existence of the network structure, the fullerene grafted PCL film can retain its shape at much higher temperatures than that of pure PCL film, as observed in dynamic mechanical tests. It shows a hydrophobic gelling behavior in chloroform solution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers by combined ring‐opening polymerization and cross‐coupling processes

2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene was used as initiator in ring‐opening polymerization of ε‐caprolactone in the presence of stannous octoate (Sn(Oct)₂) catalyst. The resulting poly(ε‐caprolactone) (PCL) macromonomer, with a central 2,5‐dibromo‐1,4‐diphenylene group, was used in combination with 1,4‐dibromo‐2,5‐dimethylbenzene for a Suzuki coupling in the presence of Pd(PPh₃)₄ as catalyst or using the system NiCl₂/bpy/PPh₃/Zn for a Yamamoto‐type polymerization. The poly(p‐phenylenes) (PPP) obtained, with PCL side chains, have solubility properties similar to those of the starting macromonomer, ie soluble in common organic solvents at room temperature. The new polymers were characterized by ¹H and ¹³C NMR and UV spectroscopy and also by GPC measurements. The thermal behaviour of the precursor PCL macromonomer and the final poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry analyses and compared. Copyright © 2004 Society of Chemical Industry     

Synthesis and properties of novel biodegradable poly(ε‐caprolactone)/ poly(ethylene glycol)‐based polyurethane elastomers

Elastomeric polyurethanes with tunable biodegradation properties and suitable for numerous biomedical applications were synthesized via reaction of epoxy‐terminated polyurethanes (EUPs) with 1,6‐hexamethylenediamine as curing agent. The EUPs themselves were prepared from glycidol and isocyanate‐terminated polyurethanes made from poly(ε‐caprolactone) (PCL) or poly(ethylene glycol) (PEG) and 1,6‐hexamethylene diisocyanate. All the polymers were characterized by conventional methods, and their physical, mechanical, thermal, and degradation properties were studied. The results showed that the degradation rate and mechanical properties of the final products can be controlled by the amount of PEG or PCL present in the EUP. Increasing the PEG content causes an increase of hydrolytic degradation rate, and increasing the PCL content improves the mechanical properties of the final products. Evaluation of cytotoxcicity showed nontoxic behavior of the prepared samples, but the cytocompatibility of these polymers needs to be improved. Copyright © 2006 Society of Chemical Industry     

Biodegradable and photocurable multiblock copolymers with shape‐memory properties from poly(ε‐caprolactone) diol,poly(ethylene glycol), and 5‐cinnamoyloxyisophthalic acid

Biodegradable and photocurable multiblock copolymers of various compositions were synthesized by the high‐temperature solution polycondensation of poly(ε‐caprolactone) (PCL) diols of molecular weight (M_n) = 3000 and poly(ethylene glycol)s (PEG) of M_n = 3000 with a dichloride of 5‐cinnamoyloxyisophthalic acid (ICA) as a chain extender, followed by irradiation by a 400 W high‐pressure mercury lamp (λ > 280 nm) to form a network structure. The gel contents increased with photocuring time, reaching a level of over 90% after 10 min for all copolymers without a photoinitiator. The thermal and mechanical properties of the photocured copolymers were examined by DSC and tensile tests. In cyclic thermomechanical tensile tests, the photocured ICA/PCL/PEG copolymer films showed good shape‐memory properties at 37–60°C, with both shape fixity ratio and shape recovery ratio over 90% at a maximum tensile strain of 100–300%. The water absorption of these copolymers and their rate of degradation in a phosphate buffer solution (pH 7.0) at 37°C increased significantly with increasing PEG content. The novel photocured ICA/PCL/PEG multiblock copolymers are potentially useful in biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

聚乙二醇/聚己内酯三嵌段共聚物的合成与表征

以甲苯二异氰酸酯 (TDI)为偶联剂 ,合成了聚乙二醇 (PEG) /聚己内酯 (PCL)两亲性三嵌段共聚物 (PEG-b-PCL -b -PEG ,PECL) ,采用IR、1 H-NMR、DSC和WAXD分析和研究了PECL的结构与性能。实验结果表明 ,PECL的结构和组成与设计相一致 ,结晶度和熔点均低于均聚物 ,且随着PECL中PCL嵌段含量的增加 ,PCL嵌段熔点升高。透射电镜照片显示PECL纳米粒呈核 /壳结构的球形。     

Synthesis and characterization of poly(oxyethylene)–poly(caprolactone) multiblock copolymers

Novel poly(oxyethylene)/poly(caprolactone) POE/PCL copolymers were synthesized by step growth polymerization of poly(ε-caprolactone) diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. The reaction was performed at room temperature and yielded multiblock copolymers with predetermined POE and PCL block lengths. The resulting copolymers were characterized by various analytical techniques including SEC, IR, ¹H NMR, DSC and X-ray diffractometry. Data showed that the properties of these polymers can be modulated by adjusting the chain lengths of the macromonomers. In particular, one or two crystalline structures can exist within the copolymers of various crystallinities. © 1998 SCI.     

Synthesis and characterization of novel poly(γ‐benzyl‐L‐glutamate) derivatives tailored for the preparation of nanoparticles of pharmaceutical interest

Four poly(γ‐benzyl‐L ‐glutamate) (PBLG) derivatives bearing at one end specific groups were synthesized by ring‐opening polymerization of the corresponding γ‐benzyl‐L ‐glutamate N‐carboxyanhydride using different amine‐terminated initiators. These moieties were chosen to introduce, on demand, specific functionalities in nanoparticles of pharmaceutical interest. The PBLG and PBLG derivatives were characterized by ¹H NMR, viscosimetry, Fourier transform infrared spectroscopy and differential scanning calorimetry. Nanoparticles smaller than 100 nm in diameter could be easily prepared from these PBLG derivatives by slight modification of a known nanoprecipitation technique. Copyright © 2006 Society of Chemical Industry     

Synthesis and thermal behavior of triblock copolymers from L-lactide and ethylene glycol with long center PEG block

In this study, poly(L -lactide)–poly (ethylene glycol) (PLLA–PEG) ABA triblock copolymers with the PEG mole fraction ranging from 27 to 57% have been synthesized, and their thermal properties were investigated. Differential scanning calorimetric thermograms of copolymers obtained from specimens dissolved in CH₂Cl₂ solution and precipitated with hexane exhibit no crystallization exotherms, but those cast from CHCl₃ solution show some crystallinity. Water absorption depended on the PEG content of copolymers; thus, with a PEG mole fraction of 57, the water absorption was 82%. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1949–1954, 1998     

Hydrolytic degradation of poly(oxyethylene)–poly-(ε-caprolactone) multiblock copolymers

The degradation of poly(oxyethylene)–poly(ε-caprolactone) (POE–PCL) multiblock copolymers was investigated at 37°C in a 0.13M, pH 7.4 phosphate buffer selected to mimic in vivo conditions. The copolymers were obtained by coupling polycaprolactone diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. Various techniques, such as weighing, size exclusion chromatography, infrared, ¹H nuclear magnetic resonance, differential scanning calorimetry, and X-ray diffractometry, were used to monitor changes in total mass, water absorption, molar mass, thermal properties, degree of crystallinity, and composition. The results showed that introduction of POE sequences considerably increased the hydrophilicity of the copolymers as compared with PCL homopolymers. Nevertheless, the degradability of PCL sequences was not enhanced due to the phase separation between the two components. Significant morphological changes were also observed during the degradation. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 989–998, 1998     

新型药物载体聚乙烯-聚丙交酯载药颗粒的制备及表征

Methoxy poly （ethylene glycol） -poly （D, L-lactide） block copolymers （PEG-PLA） were prepared through ring-opening polymerization. The oil in water suspension method was used to prepare block copolymer micelles. The critical micelle concentration （CMC） by fluorescence spectroscopy was 0. 0056 mg· ml^- 1. The physical state of the inner core region of micelles was characterized with ^1 HNMR. The size of indomethacin （IMC） loaded micelles measured by dynamic light scattering （DLS） showed narrow monodisperse size distribution and the average diameters were less than 50 nm. In addition, the nanoparticles with relatively high drug loading content （DLC） were obtained.     

Transesterifications of poly(bisphenol A carbonate) with aromatic and aliphatic segments in ethylene terephthalate–caprolactone copolyester

In this article, transesterification of poly(bisphenol A carbonate) (PC) with a ethylene terephthalate–caprolactone copolyester at a weight ratio 50/50 (TCL50) was investigated by infrared spectroscopy (IR), proton nuclear magnetic resonance spectroscopy (¹H‐NMR), and a model compound. The IR and ¹H‐NMR results showed that transesterification occurred between PC and ethylene terephthalate (ET) segments in TCL50 and resulted in the formation of bisphenol A–terephthalate ester units as in the annealed blend of PC with the PET homopolyester. By comparison with a model compound, the new signal at 2.55 ppm in the ¹H‐NMR spectrum confirmed the appearance of bisphenol A–caprolactone ester units resulting from the exchange reaction of PC with caprolactone (CL) segments. The ¹H‐NMR analysis of the transesterification rates revealed that the reactions of PC with aromatic and aliphatic segments in TCL50 proceeded in a random or free manner. In addition, we separately examined the interchange reaction between a PC and poly(ε‐caprolactone) (PCL) homopolyester in an annealed blend. It was found that in the presence of a Ti compound catalyst the predominant reaction was a transesterification rather than a thermooxidative branching reaction. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1558–1565, 2001