Modified Kuz—Ram fragmentation model and its use at the Sungun Copper Mine

Rock fragmentation, which is the fragment size distribution of blasted rock, is one of the most important indices for estimating the effectiveness of blast work. In this paper a new form of the Kuz—Ram model is proposed in which a prefactor of 0.073 is included in the formula for prediction of X_50. This new equation has a correlation coefficient that is greater than 0.98. In addition, a new approach is proposed to calculate the Uniformity Index, n. A Blastability Index (BI) is used to correct the calculation of the Uniformity Index of Cunningham, where BI reflects the uniformity of the distribution. Interestingly, this correction also can be observed in the Kuznetsov—Cunningham—Ouchterlony (KCO) model, which uses In situ block size as a parameter for calculating the curve-undulation in the Swebrec function. However, it is in contrast to prediction of X₅₀ as the central parameter in Swebrec and Rosin–Rammler distribution functions. The new model is a two parameter fragmentation size distribution that can be easily determined in the field. However, it does not consider the timing effect, or upper limit for sizes, as does the original Kuz—Ram model. The model is used at the Sungun Mine, and it does a good job of predicting the fines produced during blasting.     

Biosphere reserves and the “Yucatán” syndrome: another look at the role of NGOs

After centuries of cultural and economic conquest of the Americas by European and Euro-American conquistadors, contemporary rhetoric in ex-colonial powers heralds the decline of material and ideological imperialism. Instead, it is purported that today's world is peopled by a great brotherhood, with the more affluent striving to relieve their less fortunate, underdeveloped kith. This conviction is inherent in organizations which dispense money, information, training, and other resources in the name of community development and endangered species and environmental conservation. What is rarely perceived – and practically never said – is that these “benevolent” foreign aid activities typically result in the concentration of resources and power in the hands of a few, the building of empires, and the compounding of already difficult situations, counter-productive to stated objectives. The Yucatán Peninsula is a classic case of persistent imperialism: the geographic name is a corruption of the Mayan “matan cub a than” (“I do not understand you”), while contemporary development and conservation programs habitually exhibit cultural ignorance and dominance. This paper explores a diverse literature on non-governmental organizations, reflects on likely consequences of cultural dominance, and implores professional anthropologists to be adventurous in propagating anthropological knowledge relevant to environmental protection.     

A nonlinear strength criterion for rock-like materials based on fracture mechanics

A nonlinear strength criterion for rock-like materials is developed in this paper. Taking α as an angle of micro-failure orientation in rock-like materials, a formulation between α and load is derived from a mixed-mode fracture criterion based on linear elastic fracture mechanics. According to micro-failure experimental phenomena of rock-like materials, a failure characteristic parameter under triaxial compression condition is chosen, which is relevant to confining pressure and is an invariant. A theoretical nonlinear strength criterion is also derived, which is exactly in the same mathematical form as the original Hoek–Brown empirical strength criterion. In addition, it is also found that the coefficient m in the Hoek–Brown criterion has physical meaning which is related to the ratio between the uniaxial compressive strength and the uniaxial tensile strength.     

Building simulation as an assisting tool in decision making: Case study: With or without a double-skin façade?

Implementation of double-skin façades in buildings has been an object of broad application in the recent years. In this presentation, a planned office building in the city-centre of Trondheim, Norway, is used as a case for considering whether a double-skin should be applied to the east façade in order to reduce the heating demand, thus making the double-skin façade a profitable investment. The building is modeled both with and without a double-skin façade with the building energy simulation program ESP-r. This paper describes how a double-skin façade with controllable windows and hatches for natural ventilation can be implemented in the simulation program. The simulation results indicate that the energy demand for heating is about 20% higher for the single-skin façade with the basic window solution compared to the double-skin alternative. However, by switching to windows with an improved U-value in the single-skin alternative, the difference in energy demand is almost evened out. The number of hours with excessive temperatures is, in contrast to other studies on the subject, not significantly higher for the double-skin alternative. However, the predicted energy savings are not sufficient to make the application of a double-skin façade profitable.     

Study of changes in concentration during penetration through the soil layers by means of co-relationship

This report presents a co-relationship method that is used to evaluate changes in water quality. The co-relationship based on the water quality in the Goto river basin, is defined as plots of concentration of dissolved matter against total residue on evaporation, the correlation coefficient and the regression equation. SiO₂ and COD concentrations in the water samples of the Goto river basin show a peculiar change that is independent of the total residue on evaporation and flow length, and this change is again found by means of the co-relationship. The peculiar change of SiO₂ is also observed in some rivers in Japan. The correlation coefficient of the total residue on evaporation and SiO₂ is about 0.2–0.6 in the Goto river basin and in some other rivers in Japan, and the intercept of the regression equation of SiO₂ and Cl⁻ is apt to show a plus value in SiO₂ but a minus value in Cl⁻ in most of the co-relationships. The plus value of the intercept and the gentle slope of SiO₂ show that SiO₂ concentration is independent from that of the total residue on evaporation, and the minus value of Cl⁻, shows that a certain value of total residue on evaporation corresponds to zero concentration of Cl⁻, which means Cl⁻ does not dissolve out from the soil colloid. Thus, the present report suggests that there is a peculiar behavior in some species in the water flow by means of the co-relationship.     

Caffeine as an indicator for the quantification of untreated wastewater in karst systems

Contamination from untreated wastewater leakage and related bacterial contamination poses a threat to drinking water quality. However, a quantification of the magnitude of leakage is difficult. The objective of this work is to provide a highly sensitive methodology for the estimation of the mass of untreated wastewater entering karst aquifers with rapid recharge. For this purpose a balance approach is adapted. It is based on the mass flow of caffeine in spring water, the load of caffeine in untreated wastewater and the daily water consumption per person in a spring catchment area. Caffeine is a source-specific indicator for wastewater, consumed and discharged in quantities allowing detection in a karst spring. The methodology was applied to estimate the amount of leaking and infiltrating wastewater to a well investigated karst aquifer on a daily basis. The calculated mean volume of untreated wastewater entering the aquifer was found to be 2.2 ± 0.5 m³ d⁻¹ (undiluted wastewater). It corresponds to approximately 0.4% of the total amount of wastewater within the spring catchment.     

Magnetic refrigeration: a promising new technology for energy saving

Magnetic refrigeration is an emerging, environment-friendly technology based on a magnetic solid that acts as a refrigerant by magnetocaloric effect. The reference cycle for magnetic refrigeration is AMR (Active Magnetic Regenerative refrigeration). In this paper, attention is directed towards the near-room-temperature range. We compare the energetic performance of a commercial R134a refrigeration plant to that of a magnetic refrigerator working with an AMR cycle. The comparison is carried out by means of a mathematical model. In these simulations, we consider different solid magnetic refrigerants, namely, Gd, Gd_0.95Dy_0.05, Gd_0.9Tb_0.1,Gd₅Si₂Ge₂, MnAs_0.9Sb_0.1, and MnAs_0.95Sb_0.05. We compared two different geometries of the regenerator: a porous medium and a flat plate. In the former, the Coefficient of Performance (COP) of the AMR cycle is better than that of the vapour compression plant only in the low mass flow-rate range. Whereas in a flat plate regenerator, the COP of the AMR cycle is better than that of the vapour compression plant only in the high mass flow-rate range.     

Diaphragm wall-soil-cap interaction in rectangular-closeddiaphragm-wall bridge foundations

Rectangular-closed-diaphragm-wall foundation is a new type of bridge foundation. Diaphragm wallsoil-cap interaction was studied using a model test. It was observed that the distribution of soil resistance under the cap is not homogeneous. The soil resistance in the corner under the cap is larger than that in the border; and that in the center is the smallest. The distribution of soil resistance under the cap will be more uniform, if the sectional area of soil core is enlarged within a certain range. Due to the existence of cap, there is a “weakening effect” in inner shaft resistance of the upper wall segments, and there is “enhancement effect” in the lower wall segments and in toe resistance. The load shearing percentage of soil resistance under the cap is 10%–20%. It is unreasonable to ignore the effects of the cap and the soil resistance under the cap in bearing capacity calculations. __________ Translated from China Civil Engineering Journal, 2007, 40(8): 67–73 [译自: 土木工程学报]     

Optimal sizing of building integrated hybrid PV/diesel generator system for zero load rejection for Malaysia

In this research, an optimisation for building integrated hybrid PV/diesel generator system for zero load rejection for Malaysia is performed. The optimisation is performed considering a loss-of-load probability (LLP) less than 0.01. However, the daily averages of solar energy for Malaysia and a mathematical model of a hybrid PV/diesel generator system are used in this optimisation. The optimisation presented in this paper aims to calculate the optimum capacities of a PV array and diesel generator, which investigate the minimum system cost. An optimisation problem in terms of system units’ cost is solved graphically in this study. Moreover, the optimised system is compared to other energy source choices to highlight its feasibility. The recommended configuration of a PV/diesel system located in Malaysia is C_A = 1.2, C_DG = 0.3, while the optimum C_B is 0.1. The results of the optimisation show that a PV/diesel generator choice is more feasible compared to a standalone PV system or diesel generator system because it reduces the system cost by 35%.     

The isotopic record of atmospheric lead fall-out on an Icelandic salt marsh since AD 50

We report a record of atmospheric Pb deposition at a coastal site in western Iceland that spans the last two millennia. The elemental concentrations of Pb, Al, Li and Ti are determined using ICP-MS from a sediment monolith collected from a salt marsh. Multicollector (MC) ICP-MS analysis is used to obtain isotopic ratios of stable Pb. The Pb/Ti and Pb/Li ratios are used to separate natural Pb background concentrations from Pb derived from remote anthropogenic sources. The pollution record in western Iceland is subdued in comparison with Pb records from the European mainland, but the isotopic character, profile and timing of Pb deposition show good agreement with the atmospheric Pb fall-out reported from sites in Scandinavia and northwestern Europe. At the bottom of the sequence we isolate a low-level (0.1-0.4 mg kg^− 1) Pb enrichment signal dated to AD 50-150. The isotopic signature and timing of this signal suggest Roman metal working industries as the source. In the subsequent millennium there was no significant or very low (i.e. elemental concentrations < 0.01 mg kg^− 1) anthropogenic Pb deposition at the site up to, and including, the early Medieval period. Above a pumice layer, dated to AD 1226-1227, a small increase in Pb deposition is found. This trend is maintained until a more substantive and progressive increase is signalled during the late 1700s and early 1800s. This is followed by a substantial enrichment signal in the sediments (> 3.0 mg kg^− 1) that is interpreted as derived from industrial coal burning and metal working during the 19th and 20th centuries in northern Europe. During the late 20th century, significant fall-out from European fuel additives reached Iceland.     

The definition of partnering as a Wittgenstein family‐resemblance concept

This article on partnering and family‐resemblance makes two contributions to the debate about the definition of partnering in construction. The first is a distinction between general prerequisites, components and goals when discussing the concept. In order to understand what is specific about partnering the focus should be on the components, which are identified through a literature review. The second contribution is to apply Ludwig Wittgenstein's idea of family‐resemblance to the partnering concept. His idea is that a complex concept can be understood as a network of overlapping similarities. From the literature review it is concluded that there are two necessary components in partnering – trust and mutual understanding – and that a number of different components can be added to form a specific variant of partnering. This provides a new method to define the vague and multifaceted concept of partnering in a flexible and structured way.     

Simple monopoly price theory in a spatial market

One of main conclusions drawn by prior studies is that in a spatial market, the shape of the demand function can fully determine whether one simple pricing policy is superior to another either on the basis of the firm’s preference or social desirability while there is one assumption that is generally stipulated, namely, that the fixed market area assumption under which the market area is exogenously determined and remains the same under alternative pricing policies. In order to fully understand the impact of a demand function, this paper attempts to reexamine the relative economic advantages between two simple spatial pricing policies in a world with variable market area, that is, the market area is endogenously determined the price charged. We show that the fixed market area assumption is valid only where demand is linear, but no longer holds where demand is nonlinear. Moreover, and more importantly, we show that in a world with variable market area, some conclusions drawn by prior studies on the relative economic benefits of two pricing policies cannot remain valid. The main conclusion of this paper is that even the relative economic benefits of two simple spatial pricing policies is concerned, the impact of economic space is significant.

Experimental and CFD study of ventilation flow rate of a Monodraught™ windcatcher

Monodraught™ windcatchers are commercial natural ventilation devices, which are primarily driven by wind to produce both extract and supply air flow. The measurement of the net flow rate (extract minus supply) of a Monodraught™ windcatcher ABS 550 for various wind speeds and directions is introduced. The ventilation measurement system uses a cone flow meter and a blower fan. CFD standard k − ? turbulence model is employed to calculate the flow rate. The situation using a blower fan is considered in modelling and the effect of the manometer sensitivity is also discussed. The comparison has indicated a good agreement between measurement and simulation. CFD modelling of the windcatcher is then carried out for the situation of outdoor far field wind. At the same nominal wind speed, the calculated extract flow rate of the windcatcher in a far field wind is roughly twice that for the situation using a blower fan, the wind direction has a small effect on the extract flow rate. The extract and supply flow rates are also calculated for various room pressure due to various wall openings and installation on a flat roof or a pitched roof. The contribution of the buoyancy effect on the flow rates is discussed in simulation.     

Performance of an earth wall stabilized with bearing reinforcements

This article presents the performance of a fully instrumented test wall reinforced with bearing reinforcement. Bearing reinforcement is an inextensible earth reinforcement. It is composed of a longitudinal member and transverse members. The longitudinal member is a deformed steel bar and the transverse members are a set of equal steel angles. The test wall was 6 m high, 9 m long at the top, 6 m wide at the top, and 12 m long, 21 m wide at the base and was constructed on a hard stratum. The facing panels were made of segmental concrete block which measured 1.50 × 1.50 × 0.14 m in dimension. From the full-scale test results, the bearing stress distribution is a trapezoid shape as generally assumed for the examination of the external stability of MSE walls. The tilt of the bearing reinforcement earth (BRE) wall indicates that the BRE wall behaves as a rigid body. The coefficients of earth pressure decrease with depth and approach the active state at deeper reinforcement level. From the variation in the stiffness factor as a function of depth and lateral earth pressure, the bearing reinforcement has a stiffness factor of K/K_a = 1.7, which is much lower than that of steel grids and metal strips. The lower tension (coefficient of lateral earth pressure) reduces the cross-sectional area of the longitudinal members and hence cost effectiveness. The maximum tension line (possible failure plane) of the BRE wall is bilinear, similarly to the coherent gravity structure hypothesis, which is commonly used for the analysis of inextensible reinforcements. Finally, the suggested method of designing the BRE wall is presented. It has been successfully used to design several BRE walls founded on the hard stratum in different areas in Thailand.     

Modeling the effect of hygroscopic curtains on relative humidity for spaces air conditioned by DX split air conditioning system

The use of hygroscopic materials for moisture buffering is a passive way to moderate the variation of indoor humidity. Through absorption and desorption, surface materials in the indoor environment, such as curtains, carpets and wall paper, are able to dampen the moisture variations. The moisture buffering capacity of these materials may be used to improve the relative humidity of the indoor environment at reduced energy costs.The objectives of this paper are threefold. The first objective is to derive a theoretical model for the transient moisture transfer between a curtain system and the indoor air for the case where the curtain is placed in front of a wall. The second objective is to conduct experiments inside environmental chambers to validate the theoretical model and to test the ability of curtains to moderate indoor humidity. It is shown that the experimental results for the curtain moisture uptake and the relative humidity inside the chamber compared well with the model simulation results. The third and final objective is to test and evaluate the model under “real environment conditions” for a case study of a hygroscopic cotton curtain, placed in a “typical” office space in the city of Beirut with an area of 25 m² that uses direct expansion (DX) air conditioning system. It is found that hygroscopic curtains maintain humidity of less than 65% during part load operation compared to the upper limit of 70% relative humidity when no curtain is used. On the other hand, it is found that the energy use, as determined by the daily electrical power consumption of the DX system, is almost the same for the two cases, (with and without a curtain), where approximately 20 kWh of energy input is required 13 kWh of sensible energy and 7 kWh of latent energy.     

Causes of weight reduction effects of material substitution on constant stiffness components

The substitution of lightweight materials, such as aluminum or magnesium alloys, to produce lightweight car bodies, has been the subject of intensive research in recent years. It has been established that an aluminum body is lighter than a steel body for constant stiffness. The causes of this weight reduction have not been established. In particular, since the specific modulus (modulus of elasticity/density) of steel, aluminum and magnesium are nearly identical, there is no easy answer for their ability to reduce weight.In this paper, it is shown that there are thin-walled effects that are dependent on the thickness of the material. These thin-walled effects appear in joints and other parts with complex geometry and loading conditions and can significantly weaken the part. For example, the flanges on a curved beam in flexure have an effective (load-bearing) width that increases as the material is thickened. A part made of thicker material uses its material more efficiently (has a higher percentage of load-bearing material) than a thinner part. This thickness dependence is important because thin-walled parts made from lightweight materials, such as aluminum, are thicker than their steel counterparts; hence the parts made from lightweight materials use their material more efficiently. It is further shown that reducing these thin-walled effects through better reinforcements produces significant weight reduction effects and also reduces the weight reduction effects of substituting aluminum for steel. Thus a strong, lightweight body can be achieved using steel and proper design of joints and other complex geometry parts. This is a more cost-effective way of achieving a lightweight body.The concept of a structural index, λ, is developed and applied to the joints of a truck cab. It is assumed that when performing material substitution, only the thickness, t, is changed. It is shown that the stiffness, K, of the beam can be defined as a function of t^λ, that 1≤λ≤3, and that λ can be used to predict the weight savings from material substitution where stiffness is held constant. It is then demonstrated that λ can be used to predict the weight savings from material substitution in the more complex cases of the joints of a light truck cab.     

An experimental study on backdraught: The dependence on temperature

This paper presents the results of a series of reduced scale experiments to investigate the temperature conditions leading to backdraught in a fire compartment (0.8 m×0.4 m×0.4 m), using solid polypropylene pellets as the fuel. The factors of primary interest are the pre-burn time, before the fire becomes oxygen limited, the duration of door closure, and the temperature distribution in the compartment. It is shown that the temperature inside the compartment is crucial for the occurrence of backdraught. Above 350 °C, backdraught by auto-ignition is possible. If a pilot spark is present, backdraught may occur at temperatures down to 300 °C. It is shown that backdraught conditions can be achieved in the early stages of a fire as long as a suitable temperature is reached, at considerably lower temperatures than those generated during flashover. Further investigation on gas concentration is essential to understand the chemistry of backdraught combustion.     

Effect of NOx on AgI formation in Ag-mordenite

Ag loaded mordenite can be used as a trap for radio-iodine arising from nuclear reprocessing operations. Typically, iodine is trapped in the Ag loaded mordenite by the formation of AgI in the pores of the mordenite, through a solid-vapour reaction. In the presence of NO_x and water vapour, AgI is most likely formed by liquid-vapour reaction between AgNO₃ and I₂. This reaction results in the formation of large aggregates of AgI crystals on the surface of the mordenite, also leading to a yellow colouration of the mordenite, which is not observed when NO_x and water vapour is absent.