粘贴钢板加固钢筋混凝土梁的分离式有限元模型

提出了外粘钢板加固受弯钢筋混凝土梁的非线性有限元模型。该模型中采用了一种特殊的、具有剥离破坏功能的界面单元来模拟混凝土梁和外粘钢板之间的粘结层,这种剥离破坏主要发生在粘贴钢板端部区域和弯曲、剪切裂缝附近。影响这种剥离破坏的主要因素有两个:一是粘贴钢板的端部与加固梁支座距离;二是粘贴钢板的厚度。传统的梁理论不能描述这种加固梁破坏模式,采用有限元方法能全方位地描述这种加固梁的各种性状和破坏模式。数值计算结果与粘贴不同厚度钢板加固梁的试验结果相吻合。     

碳纤维布加固混凝土梁的剥离破坏

碳纤维布加固混凝土结构中剥离破坏是一种重要的破坏形式,通过九根碳纤维布加固混凝土梁的模型试验,考察了剥离承载力及剥离模式。根据试验结果和力学理论知识,对碳纤维布加固混凝土梁的剥离破坏进行了极限应力分析,建立了极限状态的判据和相应的碳纤维布剥离承载力计算方法,在计算方法中考虑了粘结正应力与剪应力的综合作用以及U形箍的横向剪切变形,与试验结果的比较表明,方法具有较高的精度,完善了碳纤维布加固混凝土梁的设计理论。     

内嵌CFRP筋加固宽缺口混凝土梁内力解析与试验研究

针对内嵌碳纤维增强塑料筋加固宽缺口混凝土梁体系,对碳纤维增强塑料筋、胶粘剂及混凝土三种介质两个界面的内力进行了力学解析分析,分析研究表明:剪应力是碳纤维增强塑料筋-胶粘剂-混凝土界面的粘结应力的主体,由内嵌加固宽缺口梁破坏试验可直接获取界面的剥离承载力;碳纤维增强塑料筋的受力相当于外表受到剪应力和正应力的圆柱体,剪应力靠胶结力提供,筋表面的平均剪应力可以通过宽缺口处外露部分的应变片实测得到,且与试验结果吻合较好,筋表面正应力的作用可以忽略;碳纤维筋横截面上的正应力在筋的长度方向成幂指数分布,沿筋截面径向分布不均匀,这导致其横截面中心的变形滞后于筋边缘的变形;槽内胶凝固后的内聚体是一个断面内圆外方的柱体,可以假定为是近似的厚壁圆筒,胶内聚体内的切向和径向应力对胶内聚体的剪切变形几乎没有影响;界面剥离破坏在比邻界面的混凝土中发生,因此混凝土强度将显著影响界面粘结性能与剥离承载力。     

碳纤维布加固已承受荷载的钢筋混凝土梁抗弯性能试验研究及抗弯承载力计算

进行了6根碳纤维布加固已承受荷载的钢筋混凝土梁和2根对比混凝土梁的抗弯性能试验研究,分析了碳纤维布加固已承受荷载的钢筋混凝土梁的破坏机理,研究了荷载历史对加固梁极限荷载的影响。试验结果表明,粘贴碳纤维布可以有效地提高加固梁的抗弯承载能力。无论荷载历史如何,只要梁承受的初始荷载相同,梁破坏时的极限荷载基本相同。梁端锚固对加固梁的极限荷载影响不明显。根据不同的破坏模式,提出了碳纤维布加固已承受荷载的钢筋混凝土梁的承载力计算方法,给出了工程实用计算公式。     

碳纤维布加固混凝土梁弯曲性能的试验研究

通过对4根矩形截面钢筋混凝土梁的静力加载试验,研究了碳纤维布对抗弯加固梁的破坏形态、刚度变化、极限承载力、变形能力和裂缝开展情况的影响,分析了碳纤维布粘贴层数和加固梁是否欲裂对碳纤维加固效果的影响.结果表明:碳纤维布可明显增强加固梁的极限承载力,改变加固梁的破坏形态,改善延性,延缓裂缝的发展,提高加固梁的整体刚度;同时碳纤维布粘贴层数越多,加固梁的极限承载力越大,但其提高程度并不与粘贴层数成正比;加固预裂梁后其极限承载力明显提高,但其延性降低.最后,针对现有的规范及理论研究结果,提出了抗弯加固梁的极限承载力计算公式,理论计算结果与试验值符合较好,满足工程实际要求.     

纤维编织网增强地聚物砂浆加固钢筋混凝土梁受剪性能研究

为研究纤维编织网增强地聚物砂浆（TRGM）加固钢筋混凝土构件的可行性,首先通过双剪试验探讨了地聚物砂浆与碳纤维编织网在常温下和高温后的粘结性能,随后开展了地聚物砂浆粘贴不同层数（1层、2层、3层）碳纤维编织网抗剪加固钢筋混凝土梁的静载试验,并与未加固梁、环氧树脂粘贴碳纤维编织网抗剪加固混凝土梁进行了试验比较。试验结果表明,地聚物砂浆与碳纤维编织网的常温粘结强度达2.02 MPa,在温度不高于300℃时强度退化不显著;在未采取任何锚固措施的情况下,采用地聚物砂浆粘贴单层碳纤维编织网加固梁的抗剪承载力相比于未加固梁提高47.1%,提高幅度约为采用环氧树脂粘贴加固的一半;两层TRGM加固梁中的纤维作用发挥得最充分。最后,提出了TRGM抗剪加固梁斜截面承载力的简化计算模型,模型计算结果与试验结果吻合较好。     

U形CFRP条带混锚加固混凝土梁抗剪试验

为解决纯粘贴U形纤维增强聚合物基复合材料（FRP）加固钢筋混凝土梁中FRP端部容易发生剥离破坏等问题,自主研发了对纤维布条带端部进行自锁锚固的方法和锚板,提出了端锚与粘贴并用的混锚U形条带抗剪加固方法。通过2根未加固梁、1根纯粘贴和2根混锚U形碳纤维增强聚合物基复合材料（CFRP）带抗剪加固梁的对比试验,证实了混锚抗剪加固的有效性：混锚能够对纤维带端部进行可靠锚固,阻止端部剥离破坏的发生,实现纤维拉断破坏,大幅度提高材料强度利用率。混锚加固在抑制混凝土梁斜裂缝开展、延缓箍筋屈服、提高箍筋和CFRP的极限应变以及提高抗剪承载力等多个方面的表现均明显优于纯粘贴加固。     

CFRP布端绕双杆自锁加固混凝土窄梁抗弯试验

为了抵抗粘贴碳纤维增强聚合物基复合材料（CFRP）加固钢筋混凝土结构中常见的剥离破坏,发明了将CFRP布端部以特定方式绕平行双杆实现自锁的方法。鉴于窄梁截面宽度有限,提出将CFRP布贴梁受拉底面布置后,用安装在梁侧面的双L形端锚装置固定双杆,形成侧锚底贴加固方案。完成了5根混凝土强度较低的矩形截面梁四点弯曲试验,其中4根采用上述锚固方式抗弯加固,检验了锚固效果,考察了CFRP布宽度及其沿全长与梁底面是否粘结对加固效果的影响。试验结果表明,采用本文方法进行加固后,端部剥离得以避免,中部剥离即使发生,或在无粘结加固梁受力后期,CFRP布仍能承担较大拉力,因此,极限荷载较对比梁有明显提高。比较而言,CFRP布与梁底有粘结时加固效果更好,CFRP布宽度加大也对提高承载力有益。     

模拟不中断交通状况下粘贴碳纤维布加固钢筋混凝土梁试验研究

为了调查动荷载作用下碳纤维布与钢筋混凝土梁的粘贴性能及加固效果,进行了5根模拟交通荷载(等幅正弦波形动荷载)作用下粘贴碳纤维布加固钢筋混凝土梁和1根保持荷载下粘贴碳纤维布加固钢筋混凝土梁以及2根对比梁的试验研究。试验中考虑了混凝土等级、配筋率、有无锚固条、粘贴长度、荷载幅值5个变化参数。试验结果表明,在模拟交通荷载的作用下,碳纤维布加固的钢筋混凝土梁粘贴性能满足要求,粘贴效果良好。在模拟交通荷载后的静载作用下,试验梁的抗弯承载力提高较多,加固效果明显,进一步验证了粘贴效果。     

复杂应力状态对混凝土梁外贴FRP条带抗剪贡献的影响

FRP剥离是外贴FRP抗剪加固混凝土梁主要的破坏模式之一。以往研究中往往简单的将面内剪切试验得到的FRP-混凝土界面粘结滑移关系应用于外贴FRP抗剪加固梁的剥离承载力计算。外贴FRP抗剪加固梁中FRP下的混凝土的应力状态与面内剪切试验情况有较大差别,这对FRP-混凝土界面的力学性能具有较大的影响。因此,以往的方法高估了FRP条带的抗剪贡献。该文研究了混凝土多轴应力状态对FRP-混凝土界面性能的影响,并根据试验研究结果,提出了U形FRP加固混凝土梁中FRP剥离应变的折减系数。与试验结果的对比计算分析表明:使用该折减系数修正后的设计公式更加合理。     

Interfacial shear stress concentration in FRP-strengthened beams

This paper reports the results of an experimental programme designed to study the interfacial shear stress concentration at the plate curtailment of reinforced concrete (RC) beams strengthened in flexure with externally bonded carbon fibre-reinforced polymer (CFRP). Specifically, the study looks at the relationship between the CFRP plate thickness and the interfacial shear stress concentration at the plate curtailment, the failure modes of the CFRP-strengthened beams as well as the efficiency of the CFRP external reinforcing system. Comparing the experimental results with existing models' predictions is another objective of this study. The experimental programme included five RC beams 115 mm×150 mm in cross-section and 1500 mm in length. Four of the RC beams were reinforced externally with CFRP plates of different thicknesses. Tests in this study showed that the thickness of CFRP plate affects not only the load-carrying and deflection capacities of the strengthened beam, but also the shear stress concentration at the CFRP/concrete interface and the beam failure mode.     

Improved model for plate-end shear of CFRP strengthened RC beams

In case of RC members strengthened by means of externally bonded reinforcement, a premature failure can be detected in addition to the conventional modes of failure observed in RC unstrengthened beams. The premature failure occurs mainly due to both shear and normal stresses induced in either the external reinforcement–concrete interface or at the level of steel reinforcement. This research is part of a complete programme aiming to set up design formulae to predict the strength of CFRP strengthened beams, particularly when premature failure through laminates-end shear or concrete cover delamination occurs. Series of RC beams were strengthened with carbon-fiber-reinforced plastic (CFRP) laminates and tested to estimate the extent of the applicability of the formulae proposed by the authors, as well as to study the influence of the layout of the external reinforcement in terms of unsheeted length (the distance between CFRP laminates-end and the nearer support) and cross-sectional area, on the behaviour of strengthened beams. The predictions using the proposed formulae are compared with the obtained experimental results, as well as with the calculated design limit states. The interfacial shear stress and the maximum deflection corresponding to the predicted values at maximum and service loads are also studied.     

碳纤维布加固RC梁中粘结性能的非线性有限元分析

碳纤维布加固钢筋混凝土(RC)梁中,碳纤维布与梁底混凝土的剥离破坏使碳纤维布的强度不能得到充分发挥。分析碳纤维布与梁底混凝土的粘结应力,是研究碳纤维布加固剥离破坏承载力的基础问题。根据4根碳纤维布加固RC梁的试验研究结果,采用商业有限元程序MSC.Marc建立有限元模型,进行了非线性计算分析。通过分离总粘结应力中的局部粘结应力,得到粘结延伸长度范围内的锚固粘结应力分布,并结合试验数据对其分布规律进行了研究。根据分析和试验结果,引入了“有效锚固粘结长度”和“锚固粘结应力”的概念,给出了极限荷载下锚固粘结应力的计算建议。     

Behavior of RC T-section beams strengthened with CFRP strips,subjected to cyclic load

This paper presents results of an experimental investigation on T-section reinforced concrete (RC) beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) strips. Specimens, one of which was the control specimen and the remaining six were the shear deficient test specimens, were tested under cyclic load to investigate the effect of CFRP strips on behavior and strength. Five shear deficient specimens were strengthened with side bonded and U-jacketed CFRP strips, and remaining one tested with its virgin condition without strengthening. The type and arrangement of CFRP strips and the anchorage used to fasten the strips to the concrete are the variables of this experimental work. The main objective was to analyze the behavior and failure modes of T-section RC beams strengthened in shear with externally bonded CFRP strips. According to test results premature debonding was the dominant failure mode of externally strengthened RC beams so the effect of anchorage usage on behavior and strength was also investigated. To verify the reliability of shear design equations and guidelines, experimental results were compared with all common guidelines and published design equations. This comparison and validation of guidelines is one of the main objectives of this work. The test results confirmed that all CFRP arrangements differ from CFRP strip width and arrangement, improved the strength and behavior of the specimens in different level significantly.     

剪跨比对CFRP加固无腹筋混凝土梁剪切破坏及尺寸效应的影响研究

剪跨比对FRP抗剪加固梁的裂缝开展和破坏模式有重要影响,但对FRP加固梁抗剪强度及尺寸效应的影响研究较少.采用三维细观数值模拟方法,考虑混凝土细观组成的非均质性及碳纤维布(CFRP)与混凝土之间的相互作用,建立了CFRP加固无腹筋钢筋混凝土梁剪切破坏力学分析模型.在验证细观模拟方法合理性的基础上,拓展模拟与分析了剪跨比...     

Experimental study on RC beams with FRP strips bonded with rubber modified resins

This paper presents the effects of adhesive properties on structural performance of reinforced concrete (RC) beams strengthened with carbon fiber reinforced plastic (CFRP) strips. The epoxy adhesives modified with liquid rubber of different content were used to bond the CFRP strips, and four point bending experiments were carried out on RC beams. The experimental results show that different CFRP strip thickness of 0.22 and 0.44 mm resulted in a transition of failure mechanism from interfacial debonding along the CFRP-concrete interface to concrete cover separation starting from the end of CFRP strips in the concrete. Moreover, it is suggested that no matter interfacial debonding or concrete cover separation, the rubber modifier enhanced the structural performance by increasing the maximum load-carrying capacity and the corresponding ductility, compared with the beams bonded with a neat epoxy resin. The improvement of structural performance due to modified adhesive was associated with the modification of stress profiles along the CFRP-concrete interface especially the stress concentration at the end of FRP, and the enhanced interlaminar fracture toughness. Rubber modified epoxy therefore is worth further studying in practical repair applications.     

Failure diagrams of FRP strengthened RC beams

Amongst various methods developed for strengthening and rehabilitation of reinforced concrete (RC) beams, external bonding of fibre reinforced plastic (FRP) strips to the beam has been widely accepted as an effective and convenient method. The experimental research on FRP strengthened RC beams has shown five most common modes, including (i) rupture of FRP strips; (ii) compression failure after yielding of steel; (iii) compression failure before yielding of steel; (iv) delamination of FRP strips due to crack; and (v) concrete cover separation. In this paper, a failure diagram is established to show the relationship and the transfer tendency among different failure modes for RC beams strengthened with FRP strips, and how failure modes change with FRP thickness and the distance from the end of FRP strips to the support. The idea behind the failure diagram is that the failure mode associated with the lowest strain in FRP or concrete by comparison is mostly likely to occur. The predictions based on the present failure diagram are compared to 33 experimental data from the literature and good agreement on failure mode and ultimate load has been obtained. Some discussion and recommendation for practical design are given.     

Contribution to the understanding of the mechanical behaviour of CFRP-strengthened RC beams subjected to fire: Experimental and numerical assessment

Recent experimental tests and numerical simulations about the fire resistance behaviour of CFRP-strengthened RC beams proved that CFRP strengthening systems are able to attain considerable fire endurance, provided that adequate fire protection systems are used. In a fire event, even though a CFRP laminate may rapidly debond from the central part of the beam in which it is installed, if sufficiently thick insulation is applied in the anchorage zones, the laminate transforms into a “cable” fixed at the extremities, thus maintaining a considerable contribution to the mechanical response of the strengthened beam. This paper presents experimental and numerical investigations on CFRP-strengthened RC beams with the objective of understanding in further depth their fire resistance behaviour, namely the influence of the above mentioned “cable” mechanism on the mechanical response of the beams. The experimental campaign, performed at ambient temperature, comprised 4-point bending tests on RC beams strengthened with CFRP laminates according to either the EBR or the NSM techniques, in both cases fully or partially (only at the anchorages, thus simulating the cable mechanism) bonded to the soffit of the beams. For the test conditions used in this study, for both types of strengthening systems, partially bonding the CFRP laminates did not affect the stiffness of the beams and caused only a slight reduction of their strength (6–15%). The numerical study comprised the simulation of the structural response of all beams tested. Non-linear finite element models were developed in Atena commercial package, in which a smeared cracked model was adopted to simulate concrete and appropriate bond-slip constitutive relations were defined for the CFRP-concrete interfaces. A very good agreement was obtained between experimental data and numerical results, providing further validation to the “cable” mechanism and the possibility of taking it into account when designing fire protection systems for CFRP-strengthened RC beams.     

Time-dependent behavior of RC beams strengthened with externally bonded FRP plates: interfacial stresses analysis

External bonding of fibre reinforced polymer (FRP) composites has becomes a popular technique for strengthening concrete structures all over the world. An important failure mode of such strengthened members is the debonding of the FRP plate from the concrete due to high interfacial stresses near the plate ends. For correctly installed FRP plate, failure will occur within the concrete. Accurate predictions of the interfacial stresses are prerequisite for designing against debonding failures. In particular, the interfacial stresses between a beam and soffit plate within the linear elastic range have been addressed by numerous analytical investigations. In this study, the time-dependent behavior of RC beams bonded with thin composite plate was investigated theoretically by including the effect of the adherend shear deformations. The time effects considered here are those that arise from shrinkage and creep deformations of the concrete. This paper presents an analytical model for the interfacial stresses between RC beam and a thin FRP plate bonded to its soffit. The influence of creep and shrinkage effect relative to the time of the casting and the time of the loading of the beams is taken into account. Numerical results from the present analysis are presented to illustrate the significance of time-dependent of adhesive stresses.