Reversed-phase high-performance liquid chromatography combined with on-line UV diode array, FT infrared, and 1H nuclear magnetic resonance spectroscopy and time-of-flight mass spectrometry: application to a mixture of nonsteroidal antiinflammatory drugs

A prototype multiply hyphenated system has been applied to the analysis of a mixture of nonsteroidal antiinflammatory drugs separated by reversed-phase HPLC. Characterization of the model NSAIDs was achieved via a combination of diode array UV, 1H NMR, FT-IR spectroscopy, and time-of-flight mass spectrometry. This combination of spectrometers allowed the collection of UV, 1H NMR, IR, and mass spectra together with atomic composition data enabling almost complete structural characterization to be performed.     

Development of HPLC/ESI-MS and HPLC/1H NMR methods for the identification of photocatalytic degradation products of iodosulfuron

In the present study, HPLC/ESI-MS and stopped-flow HPLC/1H NMR methods were developed and applied to separate and characterize the byproducts arising from TiO2-catalyzed photodegradation of the herbicide iodosulfuron methyl ester (IOME) in aqueous solution under UV irradiation. Prior to identification, irradiated solutions of IOME (200 and 1000 mg.L(-1)) were concentrated by solid-phase extraction using two cartridges: Isolute C18 and Isolute ENV+. Analytical separation was achieved on a C18 reversed-phase column with ACN/H2O (HPLC/MS) or ACN/D2O (HPLC/NMR) as mobile phase and a linear gradient with a chromatographic run time of 35 min. The combination of UV and MS data allowed the structural elucidation of more than 20 degradation products, whereas 1H NMR data permitted an unequivocal confirmation of the identities of major products and the differentiation of several positional isomers, in particular, the hydroxylation isomers. The obtained results permitted us to propose a possible degradation scheme and to put in evidence the presence of privileged sites for the attack of OH radicals. This work shows, for the first time, the application of combined HPLC with UV, MS, and NMR detection for complete structural elucidation of photocatalytic degradation products, and it will be of particular value in studies on the elimination of pollutants in aqueous solutions by photocatalysis.     

Degradation of the blister agent sulfur mustard, bis(2-chloroethyl) sulfide, on concrete

The products formed from the degradation of the blister agent sulfur mustard [bis(2-chloroethyl) sulfide] on concrete were identified using gas chromatography with mass spectrometry detection (GC/MSD), (1)H NMR, 2D (1)H-(13)C NMR and (13)C solid state magic angle spinning (SSMAS) NMR. In situ and extraction experiments were performed. Sulfur mustard was detected in the in situ (13)C SSMAS samples for 12 weeks, whereas less than 5% of the sulfur mustard was detected in extracts from the concrete monoliths after 8 days. Sulfonium ions and (2-chloroethylthio)ethyl ether (T) were observed on the in situ samples after a period of 12 weeks, whereas vinyl species and bis(2-chloroethyl) sulfoxide were observed in the extracts of the concrete monoliths within 24h. The differences between the extraction and the SSMAS data indicated that the sulfur mustard existed in the concrete in a non-extractable form prior to its degradation. Extraction methods alone were not sufficient to identify the products; methods to identify the presence of non-extractable degradation products were also required.     

On-line LC-MS analysis of urinary porphyrins

A reversed-phase high-performance liquid chromatography-mass spectrometry (LC-MS) method is described for the separation and simultaneous analysis of porphyrins related to disorders of heme biosynthesis (uro-, heptacarboxylic, hexacarboxylic, pentacarboxylic, and coproporphyrins). The method involves initial porphyrin esterification and extraction from urine. Detection and quantification is performed from the extracts by separation with a Hypersil BDS column and on-line detection by MS through coupling with an atmospheric pressure chemical ionization interface. The porphyrin esters are detected as protonated molecules [M + H]+. Their mass spectra also exhibit an [M + Na]+ fragment of lower intensity. The analytical performance of this method is compared with those of LC with UV and fluorescence detection. LC-MS used in selective [M + H]+ ion monitoring provides the lowest detection and quantitation limits. In scan mode, this LC-MS method affords, without further isolation or concentration steps, the measurement of mass spectra of unknown compounds present in the urine of patients with altered porphyrin excretion.     

Automated microflow NMR: routine analysis of five-microliter samples

A microflow CapNMR probe double-tuned for 1H and 13C was installed on a 400-MHz NMR spectrometer and interfaced to an automated liquid handler. Individual samples dissolved in DMSO-d6 are submitted for NMR analysis in vials containing as little as 10 microL of sample. Sets of samples are submitted in a low-volume 384-well plate. Of the 10 microL of sample per well, as with vials, 5 microL is injected into the microflow NMR probe for analysis. For quality control of chemical libraries, 1D NMR spectra are acquired under full automation from 384-well plates on as many as 130 compounds within 24 h using 128 scans per spectrum and a sample-to-sample cycle time of approximately 11 min. Because of the low volume requirements and high mass sensitivity of the microflow NMR system, 30 nmol of a typical small molecule is sufficient to obtain high-quality, well-resolved, 1D proton or 2D COSY NMR spectra in approximately 6 or 20 min of data acquisition time per experiment, respectively. Implementation of pulse programs with automated solvent peak identification and suppression allow for reliable data collection, even for samples submitted in fully protonated DMSO. The automated microflow NMR system is controlled and monitored using web-based software.     

Photodegradation of nitrobenzene using 172 nm excimer UV lamp

Photodegradation of nitrobenzene (NB) using an excimer UV lamp at a wavelength of 172 nm is investigated. Experimental results show that high concentration nitrobenzene can be efficiently degraded with irradiation by excimer UV lamp, and confirm that degradation of nitrobenzene is more efficient by UV/H(2)O(2) combination than UV only. In the case of using UV only, 60 min of treatment was found to be sufficient to degrade the major part of NB solution with a concentration of less than 4mM. In the case of using the combination of UV/H(2)O(2) with a H(2)O(2) concentration of 7:1 molar ratio to NB, 4.07 mM NB solution drastically decreased to 0.41 mM after treatment for only 20 min. Degradation intermediate products are identified by analyzing the degradation products with GC/HRMS and possible degradation pathways of nitrobenzene are suggested.     

Method for determining molar concentrations of metabolites in complex solutions from two-dimensional 1H-13C NMR spectra

One-dimensional (1D) (1)H nuclear magnetic resonance (NMR) spectroscopy is used extensively for high-throughput analysis of metabolites in biological fluids and tissue extracts. Typically, such spectra are treated as multivariate statistical objects rather than as collections of quantifiable metabolites. We report here a two-dimensional (2D) (1)H-(13)C NMR strategy (fast metabolite quantification, FMQ, by NMR) for identifying and quantifying the approximately 40 most abundant metabolites in biological samples. To validate this technique, we prepared mixtures of synthetic compounds and extracts from Arabidopsis thaliana, Saccharomyces cerevisiae, and Medicago sativa. We show that accurate (technical error 2.7%) molar concentrations can be determined in 12 min using our quantitative 2D (1)H-(13)C NMR strategy. In contrast, traditional 1D (1)H NMR analysis resulted in 16.2% technical error under nearly ideal conditions. We propose FMQ by NMR as a practical alternative to 1D (1)H NMR for metabolomics studies in which 50-mg (extract dry weight) samples can be obtained.     

1, 5-Bis (2-hydroxyacetophenone)thiocarbohydrazone: A novel colorimetric and fluorescent dual-mode chemosensor for the recognition of fluoride

1,5-Bis (2-hydroxyacetophenone)thiocarbohydrazone (H₄L) has been synthesized and characterized by means of spectroscopic and single crystal X-ray diffraction methods. Interactions of the H₄L with a variety of anions were investigated using a combination of UV–visible and fluorescence spectroscopic methods in a biological competing solvent DMSO. The H₄L has a high degree of selectivity for fluoride over other anions. ¹H NMR titration experiments indicate that a deprotonation process is involved in the chemo sensing process.     

High-resolution capillary tube NMR. A miniaturized 5-microL high-sensitivity TXI probe for mass-limited samples,off-line LC NMR,and HT NMR

A new triple-resonance (TXI) (1H, 13C, 15N) high-resolution nuclear magnetic resonance (NMR) capillary probe with 2.5-microL NMR-active sample volume (V(obs)) was built and tested for applications with mass- and volume-limited samples and for coupling of microbore liquid chromatography to NMR. This is the first microliter probe with optimized coil geometry for use with individual capillary tubes with an outer diameter of 1 mm. The 90 degree pulse lengths of the 1-mm microliter probe were below 2 micros for proton, below 8 micros for carbon, and below 20 micros for nitrogen, and a spectral line width at signal half-height below 1 Hz was obtained. Compared to a conventional 5-mm probe, the new 600-MHz 1-mm TXI microliter probe with z-gradient shows an increase in mass sensitivity by a factor of 5, corresponding to a 25-fold reduction in measuring time. The consumption of costly deuterated solvent is reduced by at least 2 orders of magnitude. The 1-mm TXI microliter probe with z-gradient allows the measurement of one-dimensional 1H NMR and two-dimensional heteronuclear NMR spectra with a few nanomoles (micrograms) of compound with high sensitivity, speed, and quality. This is a breakthrough for discrete sample NMR spectroscopy with paramount importance for structure elucidation in natural compound chemistry and metabolic research. It offers also advantages for linking chromatographic methods to NMR in a nindustrial environment. Capillary tube NMR may find new applications in areas where high sample throughput is essential, e.g., in the quality control of large sample arrays from parallel chemistry, screening, and compound depositories. It has the potential to increase the sample throughput by 1 order of magnitude or more if new hardware for fast sample handling and exchange becomes available.     

Synthesis and properties of a solution-processable truxene derivative for OLED devices

A soluble truxene derivative (TR1) attached with triphenylamine at the peripheral position was designed and synthesized. The structure and purity of TR1 were carefully characterized by 1H NMR, UV/vis and photoluminescent spectroscopy, mass spectroscopy, and thermal analyses. It exhibited good solubility in common organic solvents and good film forming properties. The maximum absorption and emission peaks in THF solution were shown at 358 nm and 415 nm, respectively. Bright blue emission was observed in both solution and solid states under UV excitation. The fluorescent quantum efficiency was 0.46. The best luminous efficiency was found to be 3.65 cd/A with CIE coordinates of (0.163, 0.260) in electroluminescence devices.     

A novel pyromellitic diimide derivative: Synthesis,gelation and spontaneous colorimetric sensing of dihydroxybenzene isomers

We report on the synthesis and self-assembly of a new hydrazide derivative N′, N′-bis[4-octadecyloxybenzamido]pyromellitic diimide (compound 1) which formed gels in several apolar organic solvents such as benzene and 1, 2-dichloroethane. ¹H NMR, and FT-IR spectroscopy studies confirmed that the intermolecular hydrogen bonding and van der Waals interactions were major driving forces for the formation of self-assembling gels. The gelator can form noncovalent interactions with dihydroxybenzenes, exhibiting different colors when it complexes with different positional isomers, and thus can be used to sense the positional isomers of dihydroxybenzenes by the naked eyes. This sensing property was further investigated by UV/Vis, ¹H NMR, and ¹H NMR NOESY spectroscopy which revealed that the charge–transfer interaction between hydroxyl groups of the dihydroxybenzene isomers (donor) and compound 1 (acceptor) accounted for this property.     

Photo responsive monoolein cubic phase containing coumarin-Tween 20 conjugates

Photo-responsive monoolein (MO) cubic phase was developed by incorporating coumarin-Tween 20 conjugate in the cubic phase. 7-chlorocarbonylmethoxycoumarin was obtained from 7-hydroxycoumarin through three-step reactions with the yield of 19.8% and it was conjugated to the head group of Tween 20. The molar ratio of the coumarin derivative/Tween 20 in the conjugate was about 1/1 on ¹H NMR spectrum. The cubic phase was prepared by melting the mixture of MO/conjugate (100/0.88, w/w) and hydrating the molten mixture with 5(6)-carboxyfluorescein (CF) solution. UV irradiation (254?nm and/or 365?nm) for 3?h resulted in 1.27% to 2.69% reduction in the double bond of MO but the cubic phase was stable in terms of its integrity under the UV irradiation. The release of CF from coumarin-Tween 20 conjugate-incorporated cubic phase was somewhat suppressed by being subjected to the UV irradiation. The head groups of coumarin-Tween 20 conjugate will be cross-linked so the diffusion in the water channel will be suppressed.     

Combining PARAFAC analysis of HPLC-PDA profiles and structural characterization using HPLC-PDA-SPE-NMR-MS experiments: commercial preparations of St. John's Wort

Herbal preparations represent very complex mixtures, potentially containing multiple pharmacologically active entities. Methods for global characterization of the composition of such mixtures are therefore of pertinent interest. In this work, chemometric analysis of high-performance liquid chromatography with photodiode-array detection (HPLC-PDA) data from extracts of commercial preparations of Hypericum perforatum (St. John's wort) that originate from several continents is described. The spectral HPLC profiles were aligned in the elution mode using correlation optimized warping in order to remove peak misalignment caused by retention time shifts due to matrix effects. Furthermore, the warping was assisted by HPLC-PDA-SPE-NMR-MS (SPE = solid-phase extraction) experiments that yielded 1H NMR and 13C NMR data (from 1H-detected heteronuclear correlations), as well as ESI-MS and HRMS data, which enabled the identification of all major mixture constituents. The preprocessed HPLC-PDA data were subjected to parallel factor analysis (PARAFAC), a chemometric method that is a generalization of principal component analysis (PCA) to multi-way data arrays. PCA of the peak areas obtained from the PARAFAC analysis was used to facilitate sample comparison and allowed straightforward interpretation of constituents responsible for the differences in composition between individual preparations. In addition, loadings from the PARAFAC analysis provided pure elution profiles and pure UV spectra even for coeluting peaks, thus enabling the identification of chromatographically unresolved components. In conclusion, PARAFAC analysis of the readily accessible HPLC-PDA data provides the means for unsupervised and unbiased assessment of the composition of herbal preparations, of interest for assessment of their pharmacological activity and clinical efficacy.     

Combined analysis of C-18 unsaturated fatty acids using natural abundance deuterium 2D NMR spectroscopy in chiral oriented solvents

The quantitative determination of isotopic (2H/1H)i ratios at natural abundance using the SNIF-NMR protocol is a well-known method for understanding the enzymatic biosynthesis of metabolites. However, this approach is not always successful for analyzing large solutes and, specifically, is inadequate for prochiral molecules such as complete essential unsaturated fatty acids. To overcome these analytical limitations, we use the natural abundance deuterium 2D NMR (NAD 2D NMR) spectroscopy on solutes embedded in polypeptide chiral liquid crystals. This approach, recently explored for measuring (2H/1H)i ratios of small analytes (Lesot, P.; Aroulanda, C.; Billault, I. Anal. Chem. 2004, 76, 2827-2835), is a powerful way to separate the 2H signals of all nonequivalent enantioisotopomers on the basis both of the 2H quadrupolar interactions and of the 2H chemical shift. Two significant advances over our previous work are presented here and allow the complete isotopic analysis of four mono- and polyunsaturated fatty acid methyl esters: methyl oleate (1), methyl linoleate (2), methyl linolenate (3), and methyl vernoleate (4). The first consists of using NMR spectrometers operating at higher magnetic field strength (14.1 T) and equipped with a selective cryoprobe optimized for deuterium nuclei. The second is the development of Q-COSY Fz 2D NMR experiments able to produce phased 2H 2D maps after a double Fourier transformation. This combination of modern hardware and efficient NMR sequences provides a unique tool to analyze the (2H/1H)i ratios of large prochiral molecules (C-18) dissolved in organic solutions of poly(gamma-benzyl-L-glutamate) and requires smaller amounts of solute than previous study on fatty acids. For each compound (1-4), all 2H quadrupolar doublets visible in the 2D spectra have been assigned on the basis of 2H chemical shifts, isotopic data obtained from isotropic quantitative NAD NMR, and by an interspectral comparison of the anisotropic NAD spectra of four fatty acids. The NMR results are discussed in terms of (2H/1H)i isotopic distribution and molecular orientation in the mesophase. For the first time, we show that the investigation of natural isotopic fractionation of complete fatty acids is possible without the need of chemical modifications, hence providing an alternative method to probe the mechanisms of enzymes implied in the biosynthetic pathway of unsaturated fatty acids.     

Application of a microcoil probe head in NMR analysis of chemicals related to the chemical weapons convention

A 1.7-mm microcoil probe head was tested in the analysis of organophosphorus compounds related to the Chemical Weapons Convention. The microcoil probe head demonstrated a high mass sensitivity in the detection of traces of organophosphorus compounds in samples. Methylphosphonic acid, the common secondary degradation product of sarin, soman, and VX, was detected at level 50 ng (0.52 nmol) from a 30-microL water sample using proton-observed experiments. Direct phosphorus observation of methylphosphonic acid with (31)P{(1)H} NMR experiment was feasible at the 400-ng (4.17 nmol) level. Application of the microcoil probe head in the spiked sample analysis was studied with a test water sample containing 2-10 microg/mL of three organophosphorus compounds. High-quality (1)H NMR, (31)P{(1)H} NMR, 2D (1)H-(31)P fast-HMQC, and 2D TOCSY spectra were obtained in 3 h from the concentrated 1.7-mm NMR sample prepared from 1 mL of the water solution. Furthermore, a 2D (1)H-(13)C fast-HMQC spectrum with sufficient quality was possible to measure in 5 h. The microcoil probe head demonstrated a considerable sensitivity improvement and reduction of measurement times for the NMR spectroscopy in identification of chemicals related to the Chemical Weapons Convention.     

LC-UV-solid-phase extraction-NMR-MS combined with a cryogenic flow probe and its application to the identification of compounds present in Greek oregano

Structure elucidation of natural products usually relies on a combination of NMR spectroscopy with mass spectrometry whereby NMR trails MS in terms of the minimum sample amount required. In the present study, the usefulness of on-line solid-phase extraction (SPE) in LC-NMR for peak storage after the LC separation prior to NMR analysis is demonstrated. The SPE unit allows the use of normal protonated solvents for the LC separation and fully deuterated solvents for flushing the trapped compounds to the NMR probe. Thus, solvent suppression is no longer necessary. Multiple trapping of the same analyte from repeated LC injections was utilized to solve the problem of low concentration and to obtain 2D heteronuclear NMR spectra. In addition, a combination of the SPE unit with a recently developed cryoflow NMR probe and an MS was evaluated. This on-line LC-UV-SPE-NMR-MS system was used for the automated analysis of a Greek oregano extract. Combining the data provided by the UV, MS, and NMR spectra, the flavonoids taxifolin, aromadendrin, eriodictyol, naringenin, and apigenin, the phenolic acid rosmarinic acid, and the monoterpene carvacrol were identified. This automated technique is very useful for natural product analysis, and the large sensitivity improvement leads to significantly reduced NMR acquisition times.     

Statistical total correlation spectroscopy: an exploratory approach for latent biomarker identification from metabolic 1H NMR data sets

We describe here the implementation of the statistical total correlation spectroscopy (STOCSY) analysis method for aiding the identification of potential biomarker molecules in metabonomic studies based on NMR spectroscopic data. STOCSY takes advantage of the multicollinearity of the intensity variables in a set of spectra (in this case 1H NMR spectra) to generate a pseudo-two-dimensional NMR spectrum that displays the correlation among the intensities of the various peaks across the whole sample. This method is not limited to the usual connectivities that are deducible from more standard two-dimensional NMR spectroscopic methods, such as TOCSY. Moreover, two or more molecules involved in the same pathway can also present high intermolecular correlations because of biological covariance or can even be anticorrelated. This combination of STOCSY with supervised pattern recognition and particularly orthogonal projection on latent structure-discriminant analysis (O-PLS-DA) offers a new powerful framework for analysis of metabonomic data. In a first step O-PLS-DA extracts the part of NMR spectra related to discrimination. This information is then cross-combined with the STOCSY results to help identify the molecules responsible for the metabolic variation. To illustrate the applicability of the method, it has been applied to 1H NMR spectra of urine from a metabonomic study of a model of insulin resistance based on the administration of a carbohydrate diet to three different mice strains (C57BL/6Oxjr, BALB/cOxjr, and 129S6/SvEvOxjr) in which a series of metabolites of biological importance can be conclusively assigned and identified by use of the STOCSY approach.     

双甲基丙烯酸聚乙二醇酯的合成及光聚合反应

合成了一系列新型的具有光引发聚合反应活性的单体；不同分子量的聚乙二醇的双甲基丙烯酸酯。单体在紫外光引发条件下进行自由基聚合，生成交联的聚合产物。用＾１Ｈ－ＮＭＲ对单体进行了表征。用ＩＲ对单体和聚合物进行了分析，研究了双甲基丙烯酸二乙二醇酯的聚合反应动力学，测定了聚合活化能。     

Quantification of high-resolution (1)H NMR spectra from rat brain extracts

Extracting quantitative information about absolute concentrations from high-resolution (1)H NMR spectra of complex mixtures such as brain extracts remains challenging. Partial overlap of resonances complicates integration, whereas simple line fitting algorithms cannot accommodate the spectral complexity of coupled spin systems. Here, it is shown that high-resolution (1)H NMR spectra of rat brain extracts from 11 distinct brain regions can be reproducibly quantified using a basis set of 29 compounds. The basis set is simulated with the density matrix formalism using complete prior knowledge of chemical shifts and scalar couplings. A crucial aspect to obtain reproducible results was the inclusion of a line shape distortion common among all 73 resonances of the 29 compounds. All metabolites could be quantified with <10% and <3% inter- and intrasubject variation, respectively.