Triazolyl blue tetrazolium bromide as a novel corrosion inhibitor for steel in HCl and H2SO4 solutions

The inhibition effect of triazolyl blue tetrazolium bromide (TBTB) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solution was investigated for the first time by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that TBTB is a very good inhibitor, and is more efficiency in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of TBTB on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that TBTB acts as a mixed-type inhibitor in both acids.     

Three pyrazine derivatives as corrosion inhibitors for steel in 1.0 M H2SO4 solution

The inhibition effect of three pyrazine derivatives of 2-methylpyrazine (MP), 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M H₂SO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that all pyrazine compounds are good inhibitors, and inhibition efficiency follows the order: ABP > AP > MP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. For all these pyrazine derivatives, they act as mixed-type inhibitors. The probable inhibitive mechanism is proposed from the viewpoint of adsorption theory.     

Alizarin violet 3B as a novel corrosion inhibitor for steel in HCl, H2SO4 solutions

The inhibition effect of alizarin violet 3B (AV3B) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solutions was investigated for the first time by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that AV3B is a good inhibitor, and exhibits more efficient in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of AV3B on CRS surface obeys Langmuir adsorption isotherm in both acids. Polarization curves reveal that AV3B acts as a mixed-type inhibitor.     

Nitrotetrazolium blue chloride as a novel corrosion inhibitor of steel in sulfuric acid solution

The inhibition effect of nitrotetrazolium blue chloride (NTBC) on the corrosion of cold rolled steel (CRS) in 0.5 M H₂SO₄ was investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The results show that NTBC is a good inhibitor, and the adsorption of NTBC on CRS surface obeys Langmuir adsorption isotherm. Polarization curves show that NTBC acts as a mixed-type inhibitor. EIS spectra consist of large capacitive loop at high frequencies followed by a small inductive one at low frequency values, and charge transfer resistance increases with the inhibitor concentration.     

Inhibition effect of 6-benzylaminopurine on the corrosion of cold rolled steel in H2SO4 solution

The inhibition effect of 6-benzylaminopurine (BAP) on the corrosion of cold rolled steel (CRS) in 1.0-7.0 M H₂SO₄ at 25-50 °C was studied by weight loss and potentiodynamic polarization methods. Fourier transform infrared spectroscopy (FTIR) and atomic force microscope (AFM) were used to characterize the CRS surface. The results showed that BAP was a good inhibitor in 1.0 M H₂SO₄, and the adsorption of BAP obeyed the Temkin adsorption isotherm. Polarization curves showed that BAP acted as a mixed-type inhibitor in sulfuric acid. Depending on the results, the inhibitive mechanism was proposed.     

Sodium molybdate as a corrosion inhibitor for aluminium in H3PO4 solution

The inhibition effect of sodium molybdate (Na₂MoO₄) on the corrosion of aluminium in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS) methods. The results show that Na₂MoO₄ is a good inhibitor, and the inhibition efficiency obtained by three methods is higher than 84% at 20 mM. The adsorption of Na₂MoO₄ obeys Freundlich isotherm at lower concentrations (1–7 mM), while Langmuir isotherm at higher concentrations (7–20 mM). Polarisation curves indicate that Na₂MoO₄ acts as an anodic inhibitor. EIS spectra exhibit three loops (two capacitive loops and one inductive loop).     

Benzyltrimethylammonium iodide as a corrosion inhibitor for steel in phosphoric acid produced by dihydrate wet method process

The inhibition effect of benzyltrimethylammonium iodide (BTAI) on the corrosion of cold rolled steel (CRS) in phosphoric acid produced by dihydrate wet method process (7.0 M H₃PO₄) solution was investigated for the first time by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) methods. The results show that BTAI is a good inhibitor, and the adsorption of BTAI obeys Langmuir adsorption isotherm. Polarization curves show that BTAI behaves as a mixed-type inhibitor. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability. The inhibition action of BTAI is also evidenced by SEM images.     

Synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye (DHBA) on corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. Effects of inhibitor concentration, temperature, immersion time and acid concentration on synergism are discussed in detail. The results reveal that DHBA has moderate inhibitive effect and its adsorption obeys Temkin adsorption isotherm. For the cerium(IV) ion, it has negligible effect. However, incorporation of Ce⁴⁺ with DHBA improves the inhibition performance significantly, and produces strong synergistic inhibition effect.     

Corrosion inhibition of zinc in tetra-n-butylammonium bromide aerated aqueous solution by benzotriazole and Na3PO4

The effect of benzotriazole (BTA), Na₃PO₄ and their mixture on the corrosion of zinc in 17 wt.% (0.534 mol l⁻¹) tetra-n-butylammonium bromide (TBAB) aerated aqueous solution has been investigated by means of weight-loss test, potentiodynamic polarization test, electrochemical impedance spectroscopy (EIS) and SEM/EDX techniques. The experimental results showed that BTA or Na₃PO₄ or inhibitor mixture could protect zinc in aqueous TBAB solution. The inhibitor combinations led to higher efficiencies compared to those obtained when added individually. An inhibition efficiency of an inhibitor mixture consisting of 0.5 g l⁻¹ BTA and 1 g l⁻¹ Na₃PO₄ was more than 97%.     

A comparative study of the corrosion inhibition of mild steel in sulphuric acid by 4,4-dimethyloxazolidine-2-thione

The corrosion protection of mild steel in a 2.5 M H₂SO₄ solution by 4,4-dimethyloxazolidine-2-thione (DMT) was studied at different temperatures by measuring changes in open circuit potential (OCP), potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS). Corrosion current densities calculated from EIS data were comparable to those obtained from polarisation measurements. Results showed that DMT inhibited mild steel corrosion in a 2.5 M H₂SO₄ solution and indicated that the inhibition efficiencies increased with the concentration of inhibitor, but decreased proportionally with temperature. Polarisation curves showed that DMT is a mixed-type inhibitor. Changes in impedance parameters suggested the adsorption of DMT on the mild steel surface, leading to the formation of protective films. The DMT adsorption on the mild steel surface followed the Langmuir adsorption isotherm. The kinetic and thermodynamic parameters for dissolution and adsorption were investigated. Comprehensive adsorption (physisorption and chemisorption) of the inhibitor molecules on the mild steel surface was suggested based on the thermodynamic adsorption parameters.     

Synergism between red tetrazolium and uracil on the corrosion of cold rolled steel in H2SO4 solution

The synergism between red tetrazolium (RT) and uracil (Ur) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution is first investigated by weight loss, potentiodynamic polarization, and atomic force microscope (AFM). Effects of inhibitor concentration (25-500 mg l⁻¹), temperature (20-50 °C), and acid concentration (1.0-5.0 M) on synergism are discussed systematically. The results reveal that RT has a moderate inhibitive effect, and its adsorption obeys the Freundlich adsorption isotherm. For Ur, it has a poor effect. However, incorporation of RT with Ur significantly improves the inhibition performance, and produces synergistic inhibition effect.     

Synergistic inhibition effect of rare earth cerium(IV) ion and sodium oleate on the corrosion of cold rolled steel in phosphoric acid solution

The synergistic inhibition effect of rare earth cerium(IV) ion (Ce⁴⁺) and sodium oleate (SO) on the corrosion of cold rolled steel (CRS) in 3.0 M phosphoric acid (H₃PO₄) has been investigated by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM) methods. The results reveal that SO has a moderate inhibitive effect and its adsorption obeys Temkin adsorption isotherm. Ce⁴⁺ has a poor effect. However, incorporation of Ce⁴⁺ with SO improves the inhibition performance significantly, and exhibits synergistic inhibition effect. SO acts as a cathodic inhibitor, while SO/Ce⁴⁺ mixture acts as a mixed-type inhibitor.     

Synergistic effect of iodide ion and polyacrylic acid on corrosion inhibition of iron in H2SO4 investigated by electrochemical techniques

Corrosion inhibition of iron in H₂SO₄ by polyacrylic acid (PAA) was investigated using electrochemical techniques at 30 °C. Results obtained indicate that PAA inhibited the corrosion of iron in the acid medium. Inhibition efficiency increases with increase in PAA concentration and synergistically enhanced on addition of iodide ions. Potentiodynamic polarization results suggest that PAA functions as a modest cathodic inhibitor. The adsorption of PAA onto the iron surface followed Temkin adsorption isotherm. FTIR analysis revealed that the synergistic effect due to co-adsorption of iodide ions and PAA is co-operative in nature.     

On the inhibition of mild steel corrosion by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol

The corrosion inhibition of mild steel in a 2.5 M H₂SO₄ solution by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol (APTT) was studied at different temperatures, utilising open circuit potential, potentiodynamic and impedance measurements. The results indicate that APTT performed as an excellent mixed-type inhibitor for mild steel corrosion in a 2.5 M H₂SO₄ solution and that the inhibition efficiencies increased with the inhibitor concentration but decreased proportionally with temperature. The kinetic and thermodynamic parameters for adsorption of APTT on the mild steel surface were calculated. A chemisorption mechanism of APTT molecules on the mild steel surface was proposed based on the thermodynamic adsorption parameters.     

The effect of temperature and concentration on the corrosion inhibition mechanism of an amphiphilic amido-amine in CO2 saturated solution

The corrosion inhibition mechanism of the N-[2-[(2-aminoethyl)amino]ethyl]-9-octadecenamide on mild steel surface in CO₂-saturated 5% NaCl solution has been studied. The inhibition efficiency decreases with increasing temperature. Adsorption of the inhibitor studied is found to follow the Frumkin adsorption isotherm. EIS results show that the mechanism of its corrosion inhibition at concentrations higher than critical micelle concentration is by forming a protective porous bi-layer. The activation energy, thermodynamic parameters and electrochemical results reveal a change in the adsorption mode of the inhibitor studied: the inhibitor could primarily be physically adsorbed at low concentrations, while chemisorption is favoured as concentration increases.     

Substitutional adsorption isotherms and corrosion inhibitive properties of some oxadiazol-triazole derivative in acidic solution

A newly synthesized oxadiazol-triazole derivative (TOMP), was investigated as corrosion inhibitor of mild steel in 0.5 M H₂SO₄ solution using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. Results obtained revealed that TOMP is effective corrosion inhibitor for mild steel in sulphuric acid and its efficiency attains more than 97.6% at 298 K. The number of water molecules (X) replaced by a molecule of organic adsorbate was determined from the substitutional adsorption isotherms applied to the data obtained from the weight loss experiments performed on mild steel specimen in acidic solution in the 298-333 K range.     

Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant of sodium oleate (C₁₇H₃₃-COONa, SO) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. The results revealed that SO had a moderate inhibitive effect, and the adsorption of SO obeyed the Freundlich adsorption isotherm. For the cerium(IV) ion, it had a negligible effect. However, incorporation of Ce⁴⁺ with SO significantly improved the inhibition performance, and produced strong synergistic inhibition effect. Depending on the results, the synergism mechanism was proposed.     

Synergistic inhibition effect of 6-benzylaminopurine and iodide ion on the corrosion of cold rolled steel in H3PO4 solution

The synergistic inhibition effect of 6-benzylaminopurine (BAP) and iodide ion (I⁻) on the corrosion of cold rolled steel (CRS) in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that BAP has a moderate inhibitive effect. However, incorporation of BAP with I⁻ improves the inhibition performance significantly. The adsorption of BAP in the absence and presence of I⁻ obeys Langmuir adsorption isotherm. BAP and BAP/I⁻ mixture act as mixed-type inhibitors. A probable synergism mechanism is proposed.     

Corrosion monitoring of mild steel in sulphuric acid solutions in presence of some thiazole derivatives – Molecular dynamics, chemical and electrochemical studies

The physical behavior of three selected thiazole derivatives, namely 2-Amino-4-(p-tolyl)thiazole (APT), 2-Methoxy-1,3-thiazole (MTT) and Thiazole-4-carboxaldehyde (TCA) at iron (1 1 0) surface dissolved in aqueous solution were studied via molecular dynamics (MD) simulations. From the calculated binding energies, APT showed preferred adsorption on the steel surface among the three tested thiazole derivatives. The inhibition performance of the three thiazoles on the corrosion of mild steel in 0.5 M H₂SO₄ solutions was investigated at 25 °C. Measurements were conducted under various experimental conditions using weight loss, Tafel polarization and electrochemical impedance spectroscopy. Electrochemical frequency modulation (EFM) technique was also employed here to make accurate determination of the corrosion rates and test validation of the Tafel extrapolation method for measuring corrosion rates. Polarization curves showed that the three thiazole derivatives were of mixed-type inhibitors for mild steel corrosion in 0.5 M H₂SO₄ solution. EFM results were in agreement with other traditional chemical and electrochemical techniques used in corrosion rate measurements. Chemical and electrochemical measurements are consistent with computational study that APT is the most effective inhibitor among the tested thiazoles.     

Corrosion behaviour of magnesium in ethylene glycol

Corrosion of magnesium engine components by coolant is an important issue in the automotive industry where magnesium alloys may be used. It is of significance to understand the corrosion behaviour of pure magnesium in ethylene glycol solutions, as this can provide a basis for developing new coolants for magnesium alloy engine blocks. In this paper, through corrosion and electrochemical tests, it was found that the corrosion rate of magnesium decreased with increasing concentration of ethylene glycol. Individual contaminants, such as NaCl, NaHCO₃, Na₂SO₄ and NaCl can make aqueous ethylene glycol solution more corrosive to magnesium. However, in NaCl contaminated ethylene glycol, NaHCO₃ and Na₂SO₄ showed some inhibition effect. The solution resistivity played an important role in the corrosion of magnesium in ethylene glycol solutions, and the competitive adsorption of ethylene glycol and the contaminants on the magnesium surface was also responsible for the observed corrosion behaviours. The corrosion of magnesium in ethylene glycol can be effectively inhibited by addition of fluorides that react with magnesium and form a protective film on the surface.