Synthesis and characterization of dextran hydrogels prepared with chlor‐ and nitrogen‐containing crosslinkers

In this study, we have synthesized dextran hydrogels by the crosslinking reactions of dextran with some selective Cl‐, and N‐containing functional monomers, such as epichlorohydrin (ECH), N,N′‐methylenebisacrylamide (MBAm), and glutaraldehyde (GA). Crosslinking reactions were carried out in the basic aqueous solutions (2.8NNaOH) at 25–50°C. The optimum conditions for effective crosslinking, i.e., temperature, crosslinking time, and amount of crosslinker, were determined for each system. The hydrogel discs of 3 mm diameter and 1.5 mm thickness were subjected to a number of Tris‐buffer solutions of desired pH (2.0–9.0) at 37°C. Swelling kinetics of the hydrogels were evaluated with second–order swelling model. The pH‐dependent swelling of hydrogels was strongly influenced by the functional group of crosslinker and crosslinker content. While the hydrogels prepared with ECH and MBAm shows higher swelling ability at basic medium than that of acidic medium, GA‐containing hydrogels exhibited just the opposite behavior. Mesh sizes (ξ) and average molecular weights between crosslinks (M_c) were estimated from swelling data using the Flory‐Rehner theory. Characterization studies were completed by Fourier transform infrared spectroscopy and thermal gravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4213–4221, 2006     

Controlled release of aminophylline from poly (N‐isopropylacrylamide‐co‐itaconic acid) hydrogels

N‐Isopropylacrylamide (NIPA) has been copolymerized with itaconic acid (IA) in the presence of N,N‐methylenebisacrylamide (BIS) as crosslinker. The swelling capacity and the release rate of aminophylline at 37 °C are reported. Maximum equilibrium swelling increases as the itaconic acid content in the hydrogel increases. The experimental data suggest clearly that the swelling process obeys second‐order kinetics. According to this, the kinetic constant, k, and the maximum equilibrium swelling, W_∞, have been calculated. Drug release from fully swollen hydrogels follows Fick's law closely, but deviates from it for xerogels. © 2001 Society of Chemical Industry     

Effect of poly(ethylene glycol)-derived crosslinkers on the properties of thermosensitive hydrogels

Three crosslinkers, poly(ethylene glycol) diacrylate (PEGDA), glycerol ethoxylate triacrylate (GETA) and citric acid-(PEG acrylate)₃ (CA-PEGTA) derived from poly(ethylene glycol) (PEG) were synthesized at first. The three series of poly (N-isopropylacrylamide) (PNIPAAm) hydrogels were prepared by photopolymerization with the crosslinkers and compared with a hydrogel based on commercial crosslinker, N,N′-methylene bis-acrylamide (NMBA). The influence of the crosslinker structures and contents on the swelling behaviour, mechanical properties, and drug release of the hydrogels was investigated. The results showed that the hydrogels based on PEGDA and NMBA exhibited the highest and the lowest swelling ratio, respectively. The content of crosslinker of all hydrogel series showed good thermosensitivity and thermo-reversibility. The critical gel transition temperature (CGTT) appeared at 32 °C for the hydrogel based on NMBA, but appeared at about 34 °C for other hydrogels due to higher hydrophilicity of the crosslinker. In the mechanical properties, three-arms crosslinker GETA and CA-PEGTA led to higher mechanical strength than a linear crosslinker PEGDA. A hydrogel based on GETA (NG6) showed the highest shear modulus of 656.9 kPa and Young’s modulus of 1655.0 kPa. The hydrogels containing higher content of crosslinker revealed lower swelling ratio and higher mechanical strength. In the drug release, the hydrogels with higher swelling ratios showed higher drug absorbed. The highest release percentage of caffeine and vitamin B12 for hydrogel based on PEGDA (NP6) could reach 68.3% and 75.4%, respectively. In addition, the bound water and toxicity of the hydrogels were also investigated.

     

A novel temperature and pH dual‐responsive hybrid hydrogel with polyhedral oligomeric silsesquioxane as crosslinker: synthesis,characterization and drug release properties

Octavinyl polyhedral oligomeric silsesquioxane (OVPS) is used as the crosslinker instead of N,N′‐methylenebisacrylamide (BIS) to copolymerize with 2‐(dimethylamino)ethyl methacrylate (DMAEMA) or DMAEMA and N‐isopropylacrylamide (NIPAM) to prepare hybrid hydrogels: P(OVPS‐co‐DMAEMA) and P(OVPS‐co‐DMAEMA‐co‐NIPAM). The prepared hydrogels are transparent and show dual response to temperature and pH. The hydrogels were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis and tensile tests. Their mechanical properties, swelling ratio, deswelling and reswelling behaviors as well as drug release properties were investigated. The results indicate that OVPS can be incorporated into polymer networks in proportion to feed ratios. The P(OVPS‐co‐DMAEMA) hydrogel exhibits more homogeneous interior structure, higher swelling ratio and faster response than the conventional hydrogel prepared with BIS. Moreover, the incorporation of OVPS enhances the compression and tensile properties of the hydrogels. The feed ratios of OVPS and NIPAM have a great effect on volume phase transition temperature, thermal sensitivity, swelling behavior, mechanical properties and drug release properties of the hybrid hydrogels. The prepared dual‐responsive OVPS‐containing hydrogels are expected to be used as biomedical materials in drug release and tissue engineering. © 2014 Society of Chemical Industry     

pH–temperature responsive poly(HPA‐Co‐AMHS) hydrogel as a potential drug‐release carrier

In this study, a novel pH–temperature‐responsive copolymer was first synthesized by the radical copolymerization between HPA (2‐hydroxypropyl acrylate and 2‐hydroxyisopropyl acrylate) and AMHS (aminoethyl methacrylate hydrochloric salt). The molecular structure of the corresponding copolymer has been confirmed by ¹H‐NMR and FTIR. The lower critical solution temperature of the resulting copolymer exhibited a considerable dependence upon the ratio of monomers and pH value in the medium. On the basis of the copolymer, a hydrogel as drug release carrier was prepared via the introduction of a crosslinker, N,N′‐methylenebisacrylamide. The swelling behaviors of hydrogel in the different pH value, temperature, and NaCl concentration have indicated that the hydrogel showed a remarkable phase transition at 31.5°C. The swelling ratio was increased with an increasing of pH value, especially in the greater pH values. By the use of caffeine as a model drug, we investigated the caffeine‐controlled release from hydrogel systematically as a function of pH value, temperature, and crosslinker content. The caffeine release was sensitive to the temperature. Only 55% caffeine was released from the hydrogel at room temperature, whereas ～ 92% caffeine diffused into the medium at 37°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly{N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid} hydrogels for drug delivery

A novel pH‐sensitive hydrogel system composed of itaconic acid (IA) and N‐[3‐(dimethylamino) propyl] methacrylamide was designed. This system was prepared by aqueous copolymerization with N,N‐methylene bisacrylamide as a chemical crosslinker. The chemical structure of the hydrogels was characterized by Fourier transform infrared (FTIR) spectroscopy. The microstructure and morphology of the hydrogels were evaluated by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The SEM study of hydrogels on higher magnification revealed a highly porous morphology with uniformly arranged pores ranging from 40 to 200 μm in size. XRD analysis revealed the amorphous nature of the hydrogels, and it was found that an increase in the IA content in the monomer feed greatly reduced the crystallinity of the hydrogels. Swelling experiments were carried out in buffer solutions at different pH values (1.2–10) at 37°C ± 1°C to investigate their pH‐dependent swelling behavior and dimensional stability. An increase in the acid part (IA) increased the swelling ratio of the hydrogels. Temperature‐sensitive swelling of the hydrogels was investigated at 20–70°C in simulated intestinal fluid. The hydrogels swelled at higher temperatures and shrank at lower temperatures. 5‐Aminosalicylic acid (5‐ASA) was selected as a model drug, and release experiments were carried out under simulated intestinal and gastric conditions. 5‐ASA release from the poly N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid‐80 (PDMAPMAIA‐80) hydrogel was found to follow non‐Fickian diffusion mechanism under gastric conditions, and a super case II transport mechanism was found under intestinal conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fluconazole release through semi‐interpenetrating polymer network hydrogels based on chitosan,acrylic acid,and citraconic acid

Semi‐interpenetrating polymer network hydrogels with different compositions of chitosan (Cs), acrylic acid, and citraconic acid were synthesized via free‐radical polymerization with ethylene glycol dimethacrylate as a crosslinker. The variations of the swelling percentages of the hydrogels with time, temperature, and pH were determined, and Cs–poly(acrylic acid) (PAA) hydrogels were found to be most swollen at pH 7.4 and 37°C. Scanning electron micrographs of Cs–PAA and Cs–P(AA‐co‐CA)‐1 (Cs‐poly(acrylicacid‐co‐citraconir acid)^?1) were taken to observe the morphological differences in the hydrogels. Although the less swollen hydrogel, Cs–P(AA‐co‐CA)‐1, had a sponge‐type structure, the most swollen hydrogel, Cs–PAA, displayed a uniform porous appearance. Fluconazole was entrapped in Cs–P(AA‐co‐CA)‐1 and Cs–PAA hydrogels, and the release was investigated at pH 4.0 and 37°C. The kinetic release parameters of the hydrogels (the gel characteristic constant and the swelling exponent) were calculated, and non‐Fickian diffusion was established for Cs–PAA, which released fluconazole much more slowly than the Cs–P(AA‐co‐CA)‐1 hydrogel. A therapeutic range was reached at close to 1 h for both hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermosensitive poly(n‐isopropylacrylamide) hydrogels bonded on cellulose supports

A two‐step initiation and polymerization process was developed for the preparation of two series of hydrogel–cellulose composites with distinctively different morphologies and swelling behaviors. Hydroentangled cotton cellulose fibers were optimally initiated in 20 mM aqueous ammonium cerium(IV) nitrate for 15 min and then polymerized in aqueous solutions of N‐isopropylacrylamide (NIPAAm) monomer and N,N′‐methylene bisacrylamide (BisA) crosslinker. The extents of hydrogels on the cellulose solids could be controlled by variations in the concentrations of the monomer and crosslinker as well as the NIPAAm/BisA solution‐to‐solid ratios. The two series of hydrogel–cellulose composites formed were hydrogel‐covered/filled cellulose (I) and cellulose‐reinforced hydrogel (II) composites. Series I composites were synthesized with NIPAAm/BisA solutions below the liquid saturation level of the cellulose; this led to pore structures (size and porosity) that depended on both the extent and swelling of the grafted hydrogels. Series II composites were polymerized in the presence of excessive NIPAAm/BisA solutions to produce cellulose solids completely encapsulated in the hydrogels. All the cellulose‐supported hydrogels exhibited lower extents of phase transition over a wider temperature range (28–40°C) than the free poly(N‐isopropylacrylamide) hydrogels (32°C). These findings demonstrate that hydrogels can be used to control the pore structure of cellulose and can be supported with cellulose fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 999–1006, 2003     

Modified carrageenan. 4. Synthesis and swelling behavior of crosslinked κC‐g‐AMPS superabsorbent hydrogel with antisalt and pH‐responsiveness properties

To synthesize a novel biopolymer‐based superabsorbent hydrogel, 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) was grafted onto kappa‐carrageenan (κC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N′,N′‐tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N′‐methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for κC‐g‐AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature, were systematically optimized. The swelling measurements of the hydrogels were conducted in aqueous solutions of LiCl, NaCl, KCl, MgCl₂, CaCl₂, SrCl₂, BaCl₂, and AlCl₃. Due to the high swelling capacity in salt solutions, the hydrogels may be referred to as antisalt superabsorbents. The swelling of superabsorbing hydrogels was measured in solutions with pH ranging 1 to 13. The κC‐g‐AMPS hydrogel exhibited a pH‐responsiveness character so that a swelling–deswelling pulsatile behavior was recorded at pH 2 and 8. The overall activation energy for the graft copolymerization reaction was found to be 14.6 kJ/mol. The swelling kinetics of the hydrogels was preliminarily investigated as well. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 255–263, 2005     

Heterogeneous and homogeneous structure dextran–poly(methacrylic acid) interpenetrating network hydrogels: synthesis and an application study

pH‐sensitive dextran–poly(methacrylic acid) (Dext–pMeAc) full interpenetrating network hydrogels (INHs) were prepared by simultaneous radical polymerization of methacrylic acid monomer (MeAc) and Dext polymer chains in the presence of N,N‐methylenebisacrylamide (MBA) as crosslinker in aqueous solution. These hydrogels were investigated as a drug carrier. The influence of MeAc and MBA contents in the network hydrogels on the swelling behaviour and mechanical strength of prepared Dext–pMeAc INHs was evaluated. Dext–pMeAc INHs were characterized by Fourier transform IR spectroscopy, and kinetic swelling measurements were carried out in deionized water and in simulated gastric fluids (pH 1.1 and pH 7.4). Dext–pMeAc/1‐1, Dext–pMeAc/3‐1 and Dext–pMeAc/5‐1 hydrogels with molar ratios of n_Dext/n_MeAc = 10 and n_MBA/n_Dext = 10, 30 and 50 respectively showed a core–shell structure when they swelled. This phenomenon was not observed in Dext–pMeAc/5‐2, Dext–pMeAc/5‐3 and Dext–pMeAc/5‐5 hydrogels containing a higher amount of Dext in the gels. The swelling data proved the formation of INHs with pH‐sensitive behaviour. A drug release study was performed using Rhodamine 6G fluorescent dye as a model hydrophilic bioactive molecule. The in vitro release rate of Rhodamine 6G from Dext–pMeAc/5‐3 hydrogel was dependent on the pH of the release medium. Copyright © 2012 Society of Chemical Industry     

Photopolymerized pH‐sensitive semi‐IPN: Synthesis,water uptake analysis,and preliminary drug release study

A series of pH‐sensitive semi‐IPN hydrogels, composed of varying amounts of monomer acrylic acid(AAc), crosslinker N,N′ methylene bisacrylamide, polymer cellulose acetate (CA) were synthesized via photoinitiated polymerization in dimethyl formamide (DMF) medium. The CA/P (AAc) hydrogels were characterized by FTIR, and TG analysis. The equilibrium water uptake data was used to determine various network parameters. For all the samples synthesized, the swelling exponent “n,” initial diffusion coefficient D and average diffusion coefficient D_ave were found to be in the range of 0.51–0.72, 3.16 to 7.14 × 10^?6 cm² min^?1 and 94.16–120.56 cm² min^?1, respectively. The hydrogel demonstrated fair pH‐dependent swelling behavior, with nearly 20% swelling in the medium of pH 1.0 and 615% in the medium of pH 7.4 at 37°C, respectively. The gel showed excellent swelling–deswelling cycles which were interpreted quantitatively by first order kinetic swelling and deswelling models. Finally, the preliminary insulin release study, carried out in the media of varying pH, observed almost 16% release of entrapped drug in the simulating gastric fluid (SGF) of pH 1.0 in first 2 h and nearly 51% in next 6 h in simulating intestinal fluid(SIF) of pH 7.4 at 37°C. POLYM. ENG. SCI., 53:2129–2140, 2013. © 2013 Society of Plastics Engineers     

Preparation and characterization of polyacrylic acid‐poly(vinyl alcohol)‐based interpenetrating hydrogels

Some structural features of hydrogels from poly(acrylic acid) (PAAc) of various crosslinking degrees have been investigated through mechanical and swelling measurements. Interpenetrating polymer hydrogels (IPHs) of poly(vinyl alcohol) (PVA) and PAAc have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N,N‐methylenebisacrylamide in the presence of PVA. The application of freeze–thaw (F–T) cycles leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and viscoelastic properties of the IPHs were evaluated as a function of the content of crosslinker and the application of one F–T cycle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5789–5794, 2006     

Swelling behaviors of ionic poly(N,N‐dimethylacrylamide‐co‐acrylamide) hydrogels in various media

Polyelectrolyte hydrogels were synthesized from N,N‐dimethylacrylamide, acrylamide, and itaconic acid with ammonium persulfate as a free‐radical initiator in the presence of methylene(bis)acrylamide as a crosslinker. The swelling behavior of the ionic poly(N,N‐dimethylacrylamide‐co‐acrylamide) hydrogels was investigated in pure water, in KSCN solutions with pHs 4 and 9, and in water–acetone mixtures according to the itaconic acid content in the hydrogel. The pulsatile swelling behavior of these hydrogels was studied both in water–acetone and in pH 2–9 buffer solutions. Although the equilibrium swelling ratio of the hydrogels with low concentrations of itaconic acid was almost not affected by changes in the temperature, the equilibrium swelling ratio of the hydrogels with high concentrations of itaconic acid increased in the temperature range of 20–50°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2140–2145, 2007     

Swelling behavior and determination of diffusion characteristics of acrylamide–acrylic acid hydrogels

In this study, a random copolymer of acylamide and acrylic acid [poly(AAm‐co‐AA)] was prepared by a redox copolymerization method of their aqueous solutions. The effects of initial AAm/AA mole ratio, PEG 4000 content, and N,N′‐methylenebisacrylamide concentration on swelling behavior were investigated in water. Average molecular weights between crosslinks, percentage swelling, swelling equilibrium values, and diffusion/swelling characteristics (i.e., the structure of network constant, the type of diffusion, the initial swelling rate, swelling rate constant) were evaluated for every hydrogel systems. The hydrogels showed mass swelling capabilities in the range 789–1040% (for AAm/AA hydrogels), 769–930% (for AAm/AA hydrogels in the presence of PEG 4000), and 716–1040% (for AAm/AA hydrogels containing different concentrations of the crosslinker). The swelling capabilities of the hydrogels decreased with the increasing AA, PEG 4000, and crosslinker concentrations. The diffusion of water into AAm/AA hydrogels was found to be a non‐Fickian type. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1289–1293, 2004     

Preparation of ‘click’ hydrogels from polyaspartamide derivatives

Lately, copper‐assisted azide–alkyne cycloaddition (CuAAC) has become a very interesting tool for synthesizing biocompatible polymer‐based materials such as hydrogels or microgels, which can be used as biomaterials for tissue engineering and drug delivery. Novel poly(2‐hydroxyethyl aspartamide)s (PHEAs) functionalized with pendent acetylene or azide groups were prepared from polysuccinimide, which is the thermal polycondensation product of aspartic acid, through successful ring‐opening reactions using propargylamine, 1‐azido‐2‐aminoethane and ethanolamine. The composition of the prepared copolymers was analyzed using ¹H NMR spectroscopy. Clickable PHEA derivatives were crosslinked by mixing together in water with a catalyst system of Cu(I) and N, N, N′, N′, N″‐pentamethyldiethylenetriamine, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition. The reaction of the polymers resulted in a chemoselective coupling between alkynyl and azido functional groups with multiple formation of triazole crosslinks to give hydrogels. The triazole linkages in the hydrogels are highly stable and may also play a role in swelling behavior. PHEA‐based hydrogels were also obtained by the crosslinking of azide‐ or alkyne‐modified PHEA with a small‐molecule crosslinker. The hydrogels prepared using these two methods were characterized by their degree of swelling and the morphology of the hydrogels was confirmed using scanning electron microscopy. The approach we describe here presents a promising alternative to common chemical hydrogel preparation techniques, and these hydrogels seem to possess structures having potential for a variety of industrial and biomedical applications. © 2012 Society of Chemical Industry     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Synthesis and characterization of chitosan‐graft‐poly(acrylic acid)/nontronite hydrogel composites based on a design of experiments

A 2^4–1 fractional factorial design was used to evaluate the effect of some parameters, such as the acrylic acid (AA)/chitosan (CTS) molar ratio, crosslinker concentration, initiator concentration, and filler concentration, in the swelling capacity of superabsorbent hydrogel composites based on CTS‐graft‐poly(acrylic acid) and nontronite clay. The data from wide‐angle X‐ray scattering and Fourier transform infrared spectroscopy confirmed the syntheses of the hydrogel composites. Main and interaction effects were analyzed by analysis of variance, F tests, and p values. We found that the AA/CTS and crosslinker were the most influential effects in the evaluated response. The proposed statistical model presented a high coefficient of determination (R² = 0.985). In addition to the swelling kinetics, the effects of pH and salt for the both compositions (with and without filler), which presented the best water uptake, were evaluated. Both hydrogels showed responsive behavior in relation to the pH and the salt solution, presenting good potential for application as devices in the controlled release of solutes. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

UV-induced synthesis of chitosan-<Emphasis Type="Italic">g</Emphasis>-polyacrylamide semi-IPN superabsorbent hydrogels

Superabsorbent hydrogels of chitosan-g-polyacrylamide with N,N′-methylene-bis-acrylamide as a crosslinker were prepared via UV irradiation in the absence of photoinitiator under homogeneous conditions. The product was characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy to confirm the formation of hydrogels. The transparent hydrogels have been observed to exhibit as much as 2987% swelling in acidic solution. In addition, the hydrogel which hydrolyzed for 6 h (0.24 × 10³ min) can have a water uptake of 106 times its weight (5300% swelling for 0.5 g hydrogel). The effect of several variables such as time, temperature, pH, acrylamide/chitosan ratio, crosslinker amount, and different media was explored. Finally, the prepared hydrogel have been used in adsorption of Zn(II) ions from water with high removal efficiency (0.636 meq g⁻¹ or 20.8 mg g⁻¹) at pH = 7. The experimental data of the adsorption equilibrium from Zn(II) solution fit well with the pseudo-second-order model.     

Sustained release of potassium diclofenac from a pH‐responsive hydrogel based on gum arabic conjugates into simulated intestinal fluid

This work describes the preparation, the swelling properties and the potassium diclofenac (KDF) release profile of hydrogels of gum arabic (GA), N′,N′‐dimethylacrylamide, and methacrylic acid. In order to convert GA into a hydrogel, the polysaccharide was vinyl‐modified with glycidyl methacrylate. The hydrogels showed pH‐responsive swelling changes, which were more expressive in the basic environment. Release data of KDF were adjusted to a diffusion‐based kinetic model that provides an important insight on affinity of the drug for hydrogel and solvent, which may be the leading parameter for release of guest molecules from polymers. The KDF release from the hydrogels into simulated intestinal fluid decreases when the amount of modified GA increases. This was demonstrated to be due to the higher affinity of KDF for GA‐richer hydrogel, which makes the anti‐inflammatory release less favorable. The analysis of released drug half‐time (t_1/2 = 16.10 and 21.51 h) indicated sustained release characteristics. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43319.     

Synthesis and characterization of poly(N‐vinyl imidazole) hydrogels crosslinked by gamma irradiation

Crosslinked poly(N‐vinyl imidazole) (PVIm) hydrogels in the form of rods have been prepared by ⁶⁰Co γ‐radiation initiated simultaneous polymerization and crosslinking of N‐vinyl imidazole in bulk and water. In binary aqueous systems, the percentage gelation decreased with increasing water content. The PVIm hydrogels synthesized were further protonated in HCl solutions of different concentration. PVIm and protonated PVIm (H‐PVIm) hydrogels have been characterized using spectroscopic and thermal methods, and the swelling behaviour of these two types of hydrogel has been investigated. PVIm hydrogels originally swelled to 600% (by volume) but in their protonated form at pH 7.0 reached 4000% swelling. © 2002 Society of Chemical Industry