Poly(ε‐caprolactone) composites containing gentamicin‐loaded β‐tricalcium phosphate/gelatin microspheres as bone tissue supports

In this work, novel antibacterial composites were prepared by using poly(ε‐caprolactone) (PCL) as the main matrix material, and gentamicin‐loaded microspheres composed of β‐tricalcium phosphate (β‐TCP) and gelatin. The purpose is to use this biodegradable material as a support for bone tissue. This composite system is expected to enhance bone regeneration by the presence of β‐TCP and prevent a possible infection that might occur around the defected bone region by the release of gentamicin. The effects of the ratio of the β‐TCP/gelatin microspheres on the morphological, mechanical, and degradation properties of composite films as well as in vitro antibiotic release and antibacterial activities against Escherichia coli and Staphylococcus aureus were investigated. The results showed that the composites of PCL and β‐TCP/gelatin microspheres had antibacterial activities for both bacteria. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Gentamicin loaded β‐tricalcium phosphate/gelatin composite microspheres as biodegradable bone fillers

In this study, novel composite bone fillers with microspherical shape, biodegradable property, and antibacterial effect were designed and prepared. Various fillers with different β‐tricalcium phosphate (β‐TCP)/gelatin (G)/glutaraldeyde (GA) compositions were loaded with a model antibiotic, gentamicin. The effect of composition and preparation conditions on the release of gentamicin was investigated in in vitro conditions. Complete release were observed in 12 h for pure β‐TCP powder, and this period was extended up to 96 h as the gelatin content increased in the microspheres. Morphological and chemical structures of the microspheres, before and after the release studies, were investigated by scanning electron microscopy and Fourier transform infrared, respectively. Antibacterial activities were examined against Escherichia coli by using disc diffusion method and promising results were obtained. It is proposed that these novel β‐TCP/G/GA microspheres can be applied locally to prevent and/or eliminate infection that might occur around a defected region of hard tissue and supports the healing process. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Fabrication of β‐tricalcium phosphate composite ceramic scaffolds based on spheres prepared by extrusion‐spheronization

In this study, β‐tricalcium phosphate/phosphate‐based glass (β‐TCP/PG) composite spheres were prepared by an extrusion‐spheronization method featuring high production and fine control of sphere size. Subsequently, fully interconnected β‐TCP composite ceramic sphere‐based (TCCS) scaffolds were fabricated by sintering the randomly packed β‐TCP/PG composite spheres. The results manifested that at least 20% microcrystalline cellulose (MCC) was required to obtain β‐TCP/PG composite spheres in good spherical shape. The prepared TCCS scaffolds showed hierarchical pore architecture, which consisted of interconnected macropores among the spheres, a hollow core in the sphere, plentiful medium‐sized pores in the sphere shell and micropores among the grains. The pore architecture and mechanical strength of the TCCS scaffolds could be tailored by adjusting the sintering temperature, sphere size, and amounts of PG and MCC in the β‐TCP/PG composite spheres. This work is believed to open up new paths for the design and fabrication of interconnected bioceramic scaffolds for application in bone regeneration.     

Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing

Scaffolds of polycaprolactone (PCL) and PCL composites reinforced with β‐tricalcium phosphate (β‐TCP) were manufactured aiming potential tissue engineering applications. They were fabricated using a three‐dimensional (3D) mini‐screw extrusion printing, a novel additive manufacturing process, which consists in an extrusion head coupled to a 3D printer based on the Fab@Home equipment. Thermal properties were obtained by differential scanning calorimetry and thermogravimetric analyses. Scaffolds morphology were observed using scanning electron microscopy and computed microtomography; also, reinforcement presence was observed by X‐ray diffraction and the polymer chemical structure by Fourier transform infrared spectroscopy. Mechanical properties under compression were obtained by using a universal testing machine and hydrophilic properties were studied by measuring the contact angle of water drops. Finally, scaffolds with 55% of porosity and a pore size of 450 μm have shown promising mechanical properties; the β‐TCP reinforcement improved mechanical and hydrophilic behavior in comparison with PCL scaffolds. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43031.     

Effects of micro and nano β‐TCP fillers in freeze‐gelled chitosan scaffolds for bone tissue engineering

Tissue engineering holds an exciting promise in providing a long‐term cure to bone‐related defects and diseases. However, one of the most important prerequisites for bone tissue engineering is an ideal platform that can aid tissue genesis by having biomimetic, mechanostable, and cytocompatible characteristics. Chitosan (CS) was chosen as the base polymer to incorporate filler, namely beta‐tri calcium phosphate (β‐TCP). This research deals with a comparative study on the properties of CS scaffolds prepared using micro‐ and nano‐sized β‐TCP as filler by freeze gelation method. The scaffolds were characterized for their morphology, porosity, swelling, structural, chemical, biodegradation, and bioresorption properties. Rheological behavior of polymer and polymer‐ceramic composite suspensions were analyzed and all the suspensions with varying ratios of β‐TCP showed non‐Newtonian behavior with shear thinning property. Pore size, porosity of micro‐ and nano‐sized composite scaffolds are measured as 48–158 μm and 77% and 43–155 μm and 81%, respectively. The scaffolds containing nano β‐TCP possess higher compressive strength (～2.67 MPa) and slower degradation rate as compared to composites prepared with micro‐sized β‐TCP (～1.52 MPa). Bioresorbability, in vitro cell viability by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay, proliferation by Alamar blue assay, cell interaction by scanning electron microscope, and florescence microscopy further validates the potentiality of freeze‐gelled CS/β‐TCP composite scaffolds for bone tissue engineering applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41025.     

Development of fibrin conjugated chitosan/nano β‐TCP composite scaffolds with improved cell supportive property for bone tissue regeneration

In the present study, an attempt has been made to improve cell supportive property of chitosan/nano beta tri‐calcium phosphate (β‐TCP) composite scaffolds by modification of scaffold surface with fibrin using ethyl‐3‐(3‐dimethylaminopropyl) carbodimide (EDC) as crosslinking agent. The developed fibrin conjugated chitosan/nano β‐TCP composite scaffolds possess desired pore size and porosity in the range of 45–151 µm and 81.4 ± 4.1%, respectively. No significant change in compressive strength of scaffolds was observed before and after fibrin conjugation. The calculated compressive strength of fibrin conjugated and non‐conjugated chitosan/nano β‐TCP scaffolds are 2.71 ± 0.14 MPa and 2.67 ± 0.11 MPa, respectively. Results of cell culture study have further shown an enhanced cell attachment, cell number, proliferation, differentiation, and mineralization on fibrin conjugated chitosan/nano β‐TCP scaffold. The uniform cell distribution over the scaffold surface and cell infiltration into the scaffold pores were assessed by confocal laser scanning microscopy. Furthermore, higher expression of osteogenic specific genes such as bone sialo protein, osteonectin, alkaline phosphatase, and osteocalcin (OC) on fibrin conjugated scaffolds was observed when compared to scaffolds without fibrin. Altogether, results indicate the potentiality of developed fibrin conjugated composite scaffolds for bone tissue engineering applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41534.     

Surface‐modified pliable PDLLA/PCL/β‐TCP scaffolds as a promising delivery system for bone regeneration

Surface‐modified poly(d , l ‐lactide)/polycaprolactone/β‐tricalcium phosphate complex scaffold was fabricated in this study and we hypothesized that pliable and mechanical strong scaffold would be achieved by regulation of ternary compositions; while superficial modification strategy conduced to preserve and controlled‐release of bioactive growth factors. Properties of the composite scaffolds were systematically investigated, including mechanical properties, surface morphology, porosity, wettability, and releasing behavior. Moreover, the representative cytokine, recombinant human bone morphogenetic protein‐2 (rhBMP‐2), was loaded and implanted into muscular pouch of mouse to assess bone formation in vivo. Improved osteogenesis was achieved ascribed to both amplified β‐tricalcium phosphate (β‐TCP) content and retarded initial burst release. Particularly, scaffold doped with hydroxypropyl methylcellulose (HPMC) displayed optimal osteogenic capability. The results indicated that the PDLLA/PCL/β‐TCP complex scaffold along with HPMC‐coating and rhBMP‐2 loading was a promising candidate for bone regeneration. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40951.     

Development and Characterization of Biphasic Hydroxyapatite/β‐TCP Cements

Biphasic calcium phosphate bioceramics composed of hydroxyapatite (HA) and β‐tricalcium phosphate (β‐TCP) have relevant properties as synthetic bone grafts, such as tunable resorption, bioactivity, and intrinsic osteoinduction. However, they have some limitations associated to their condition of high‐temperature ceramics. In this work self‐setting Biphasic Calcium Phosphate Cements (BCPCs) with different HA/β‐TCP ratios were obtained from self‐setting α‐TCP/β‐TCP pastes. The strategy used allowed synthesizing BCPCs with modulated composition, compressive strength, and specific surface area. Due to its higher solubility, α‐TCP was fully hydrolyzed to a calcium‐deficient HA (CDHA), whereas β‐TCP remained unreacted and completely embedded in the CDHA matrix. Increasing amounts of the non‐reacting β‐TCP phase resulted in a linear decrease of the compressive strength, in association to the decreasing amount of precipitated HA crystals, which are responsible for the mechanical consolidation of apatitic cements. Ca²⁺ release and degradation in acidic medium was similar in all the BCPCs within the timeframe studied, although differences might be expected in longer term studies once β‐TCP, the more soluble phase was exposed to the surrounding media.     

Evaluating chitosan/β‐tricalcium phosphate/poly(methyl methacrylate) cement composites as bone‐repairing materials

This study related to the preparation of chitosan microspheres by means of reacting chitosan with β‐tricalcium phosphate (β‐TCP) and glutaraldehyde by crosslinking reaction in the oil phase, followed by de‐oil and purification processes to get the product. Three cement composites, Pure P, C1P1, and C2P1, were prepared by the polymerization of poly(methyl methacrylate) (PMMA) bone cement in the presence of 0, 50, and 66.7% chitosan/β‐TCP microspheres, respectively. The result revealed the chitosan/β‐TCP microspheres obtained was in the size range of 50–150 μm. The presence of chitosan/β‐TCP microspheres in the prepared composites decreased the ultimate tensile strength, whereas the modulus remained the same as compared with the commercial PMMA bone cement. Addition of chitosan/β‐TCP microspheres into commercial PMMA cement significantly improved the handling property of the cement paste—that is, the increased setting time and less stickiness behavior of this paste was beneficial, in manipulation, to the operation and easier fittings to the shape and gap of the bony defect and interface. The decreased curing temperature was also less harmful to the surrounding tissues. From scanning electron micrograph observations, chitosan/β‐TCP microspheres can completely mix with bone cement powder and the prepared composites could provide scaffold for osteoblast cells growth and thus improve defects of commercial PMMA bone cement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3897–3904, 2003     

Preparation and characterization of plla composite scaffolds by ScCO2‐induced phase separation

Composite Scaffolds have received much attention in the tissue engineering, and how to choose the materials has become the research focus in this field. Supercritical CO₂ (ScCO₂)‐induced phase separation process was employed to prepare porous poly‐L ‐lactide (PLLA) composite scaffolds. An experiment system was set up for the purpose of investigating the effects of such parameters as the mass ratios of PLLA to polyethylene glycol (PEG) and PLLA to β‐TCP on porosity and compressive strength of composite scaffolds. The obtained composite scaffolds were characterized in many ways. Scanning electron microscopy was used to examine the morphology and pore size; porosity was analyzed by pycnometer; and the compressive strength was recorded by texture analyzer. The results indicated that the porosity was increased with the addition of PEG, and the highest porosity of PLLA/PEG composite scaffolds was 92% with the mass ratio of PLLA to PEG of 1:0.05; the compressive strength was increased with the addition of β‐TCP, and the highest compressive strength of PLLA/β‐TCP composite scaffolds was 1.76 MPa with the mass ratio of PLLA to β‐TCP of 1:0.1. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Preparation and Antibacterial Activities of Porous Silver‐doped β‐Tricalcium Phosphate Bioceramics

Infection is still a major concern in bone implants, especially in the implants with porous structures. As silver shows superior and broad‐spectrum antibacterial activity, porous silver‐doped β‐tricalcium phosphate (β‐TCP) bioceramics are prepared with 5% and 10% nanometer silver. The bioceramics show similar porous macrostructure with pure β‐TCP bioceramic, except slightly color change. They have almost identical microstructure to its pure β‐TCP counterpart under field emission scanning electron microscope. Their physical, chemical, and mechanical properties were investigated with X‐ray diffraction, Fourier transforming infrared spectrometer, and AG‐5kN, and no significant difference has been found between silver‐doped β‐TCP bioceramics and pure β‐TCP bioceramic. Bactericidal concentration of silver ions was detected in the solution soaked with the bioceramics. They can efficiently inhibit the growth of Staphylococcus epidermidis and Styphylococcus aureus, but show no cytotoxicity to L929 cells. It suggests that silver‐doped β‐TCP bioceramics can be developed into new type of bone substitutes with anti‐infection properties.     

Nano‐Hydroxyapatite Improves the Properties of β‐tricalcium Phosphate Bone Scaffolds

β‐Tricalcium phosphates have been widely used as biomaterials for bone substitutes; however, the poor mechanical properties limit the application in bearing loading bones. In this study, nano‐hydroxyapatite has been introduced to improve the mechanical properties for porous bioceramic scaffolds. Nanocomposites containing 0–10 wt% needle‐like nano‐hydroxyapatite were prepared for investigation. It has been found that needle‐like nano‐hydroxyapatite improves the toughness, hardness, and compressive strength of the porous β‐tricalcium phosphates scaffolds, as well as the microstructure properties. The study provides a reference for the development of safe, excellent bone scaffolds for bone tissue engineering.     

Synthesis of nano β‐TCP and the effects on the mechanical and biological properties of β‐TCP/HDPE/UHMWPE nanocomposites

High density polyethylene/tricalcium phosphate/ultra high molecular weight polyethylene (TCP/HDPE/UHMWPE) Nanocomposite as an orthopedic biomaterial (with better properties toward TCP/HDPE composite) was obtained. To evaluate the capability of this nanocomposite as a material for bone tissue replacement, mechanical and biological assessments were performed. In this study, nanosize β‐TCP powders with average grain size of 100 nm were synthesized by chemical precipitation method and characterized by means of X‐ray diffraction (XRD), Fourier‐transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). To evaluate the mechanical properties of this biomaterial, tensile properties were obtained for the material. Results showed that by increasing the weight percentage of β‐TCP, the elastic modulus increases, elongation at yield decreases and with no significant change in tensile strength. SEM micrographs of cryogenic fracture surface of samples indicated that distribution of nano powders in matrix is homogeneous. In vitro biological evaluations on the samples were done by performing cytotoxicity (MTT assay), alkaline phosphatase enzyme, and cell attachment tests. In all of the tests, osteoblast cells were used. Results of biological tests showed that the samples are biocompatible and they have no toxicity. Also, SEM observations demonstrated that the cells can attach to surface of nanocomposite samples, which reveals osteoconductivity of the surface. POLYM. COMPOS., 31:1745–1753, 2010. © 2010 Society of Plastics Engineers.     

Reinforcement of electrospun poly(ε‐caprolactone) scaffold using diopside nanopowder to promote biological and physical properties

Considerable efforts have been devoted toward the development of electrospun scaffolds based on poly(ε‐caprolactone) (PCL) for bone tissue engineering. However, most of previous scaffolds have lacked the structural and mechanical strength to engineer bone tissue constructs with suitable biological functions. Here, we developed bioactive and relatively robust hybrid scaffolds composed of diopside nanopowder embedded PCL electrospun nanofibers. Incorporation of various concentrations of diopside nanopowder from 0 to 3 wt % within the PCL scaffolds notably improved tensile strength (eight‐fold) and elastic modulus (two‐fold). Moreover, the addition of diopside nanopowder significantly improved bioactivity and degradation rate compared to pure PCL scaffold which might be due to their superior hydrophilicity. We investigated the proliferation and spreading of SAOS‐II cells on electrospun scaffolds. Notably, electrospun PCL‐diopside scaffolds induced significantly enhanced cell proliferation and spreading. Overall, we concluded that PCL‐diopside scaffold could potentially be used to develop clinically relevant constructs for bone tissue engineering. However, the extended in vivo studies are essential to evaluate the role of PCL‐diopside fibrous scaffolds on the new bone growth and regeneration. Therefore, in vivo studies will be the subject of our future work. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44433.     

The use of poly (ε‐caprolactone) to enhance the mechanical strength of porous Si‐substituted carbonate apatite

Poly(ε‐caprolactone) (PCL)/silicon‐substituted carbonate apatite (Si‐CO3Ap) composite derived from the interconnected porous Si‐CO3Ap reinforced with molten PCL was prepared. PCL was used to improve the mechanical properties of a porous apatite by a simple polymer infiltration method, in which the molten PCL was deposited through the interconnected channel of porous Si‐CO3Ap. The PCL covered and penetrated into the pores of the Si‐CO3Ap to form an excellent physical interaction with Si‐CO3Ap leading to a significant increase in diametral tensile strength from 0.23 MPa to a maximum of 2.04 MPa. The Si‐CO3Ap/PCL composite has a porosity of about 50–60% and an interconnected porous structure, with pore sizes of 50–150 μm which are necessary for bone tissue formation. These results could pave the way for producing a porous, structured biocomposite which could be used for bone replacement. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Guided tissue regeneration with use of β‐TCP/chitosan composite membrane

Guided tissue regeneration (GTR) membranes with bioabsorbable characteristics have been employed, in recent years, for periodontal procedures to deflect the growth of gingival tissues away from root surface. They provide an isolated space over regions with defective tissues and allow the relatively slow growing periodontal ligament fibroblasts to be repopulated over the root surface. In this study, we have employed chitosan and tricalcium phosphate (β‐TCP) as viable membrane materials and evaluated their roles in GTR applications. Three types of β‐TCP/chitosan membranes, weight ratio of β‐TCP/chitosan 65 : 35, 33 : 67, and 10 : 90, were prepared for three categories: the mechanical strength to create an effective space; the rapid rate to reach hydrolytic equilibrium in phosphate buffer solution; and the ease of clinical manipulations. Consequently, standardized, transosseous, and critical‐sized (cavity of 8 mm) skull defects were made in adult rabbits, and the defective regions were covered with the specifically prepared chitosan membranes. After 4 weeks of recovering, varying degrees of bone healing were observed beneath the β‐TCP/chitosan membranes in comparison to the control group. The β‐TCP/chitosan membranes covered regions showed a clear boundary space between connective tissues and bony tissues. Over all, good cell‐occlusion and beneficial osteogensis effects by these bioabsorbable materials toward the wound recovery were indicated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fabrication of a poly(ɛ‐caprolactone)/starch nanocomposite scaffold with a solvent‐casting/salt‐leaching technique for bone tissue engineering applications

A series of nanocomposite scaffolds of poly(?‐caprolactone) (PCL) and starch with a range of porosity from 50 to 90% were fabricated with a solvent‐casting/salt‐leaching technique, and their physical and mechanical properties were investigated. X‐ray diffraction patterns and Fourier transform infrared spectra confirmed the presence of the characteristic peaks of PCL in the fabricated scaffolds. Microstructure studies of the scaffolds revealed a uniform pore morphology and structure in all of the samples. The experimental measurements showed that the average contact angle of the PCL/starch composite was 88.05 ± 1.77°. All of the samples exhibited compressive stress/strain curves similar to those of polymeric foams. The samples with 50, 60, 70, and 80 wt % salt showed compressive‐load‐resisting capabilities in the range of human cancellous bone. With increasing porosity, a significant decrease in the mechanical properties of the scaffolds was observed. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43523.     

Preparation and properties of α‐chitin‐whisker‐reinforced hyaluronan–gelatin nanocomposite scaffolds

Tissue scaffolds made of naturally derived polymers present poor mechanical properties, which may limit their actual utilization in certain areas where high strength is a key criterion. This study was aimed at developing tissue scaffolds from a 50 : 50 w/w blend of hyaluronan (HA) and gelatin (Gel) that contained different amounts of acid‐hydrolyzed α‐chitin whiskers (CWs) by a freeze‐drying method. The weight ratios of the CWs to the blend were 0–30%. These scaffolds were characterized for their physical, physicochemical, mechanical, and biological properties. Regardless of the CW content, the average pore size of the scaffolds ranged between 139 and 166 μm. The incorporation of 2% CWs in the HA–Gel scaffolds increased their tensile strength by about two times compared to those of the other groups of the scaffolds. Although the addition of 20–30% CWs in the scaffolds improved their thermal stability and resistance to biodegradation, the scaffolds with 10% CWs were the best for supporting the proliferation of cultured human osteosarcoma cells (SaOS‐2). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fabrication and biocompatibility of porously bioactive scaffold of nonstoichiometric apatite and poly(ε‐caprolactone) nanocomposite

Bioactive nanocomposite of nonstoichiometric apatite (ns‐AP) and poly(ε‐caprolactone) (PCL) was synthesized and its porous scaffold was fabricated. The results show that the hydrophilicity and cell attachment ratio on the composite surface improved with the increase of ns‐AP content in PCL. The composite scaffolds with 60 wt % ns‐AP content contained open and interconnected pores ranging in size from 200 to 500 μm and exhibit a porosity of around 80%. In addition, proliferation of MG₆₃ cells on the composite scaffolds significantly increased with the increase of ns‐AP content, and the level of alkaline phosphatase (ALP) activity and nitric oxide (NO) production of the cells cultured on the composite scaffold were higher than that of PCL at 7 days, revealing that the composite scaffolds had excellent in vitro biocompatibility and bioactivity. The composite scaffolds were implanted into rabbit mandible defects, the results suggest that the introduction of ns‐AP into PCL enhanced the efficiency of new bone formation, and the ns‐AP/PCL composite exhibited in vivo good biocompatibility and osteogenesis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Surface‐engineered hydroxyapatite nanocrystal/ poly(ε‐caprolactone) hybrid scaffolds for bone tissue engineering

To achieve novel polymer/bioceramic composite scaffolds for use in materials for bone tissue engineering, we prepared organic/inorganic hybrid scaffolds composed of biodegradable poly(ε‐caprolactone) (PCL) and hydroxyapatite (HA), which has excellent biocompatibility with hard tissues and high osteoconductivity and bioactivity. To improve the interactions between the scaffolds and osteoblasts, we focused on surface‐engineered, porous HA/PCL scaffolds that had HA molecules on their surfaces and within them because of the biochemical affinity between the biotin and avidin molecules. The surface modification of HA nanocrystals was performed with two different methods. Using Fourier transform infrared, X‐ray diffraction, and thermogravimetric analysis measurements, we found that surface‐modified HA nanocrystals prepared with an ethylene glycol mediated coupling method showed a higher degree of coupling (%) than those prepared via a direct coupling method. HA/PCL hybrid scaffolds with a well‐controlled porous architecture were fabricated with a gas‐blowing/particle‐leaching process. All HA/PCL scaffold samples exhibited approximately 80–85% porosity. As the HA concentration within the HA/PCL scaffolds increased, the porosity of the HA/PCL scaffolds gradually decreased. The homogeneous immobilization of biotin‐conjugated HA nanocrystals on a three‐dimensional, porous scaffold was observed with confocal microscopy. According to an in vitro cytotoxicity study, all scaffold samples exhibited greater than 80% cell viability, regardless of the HA/PCL composition or preparation method. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011