基于磷杂菲衍生物多组分无卤阻燃天然橡胶的制备及性能

将磷杂菲/三嗪双基协同阻燃剂（TGD）、甲基膦酸二甲酯（DMMP）、可膨胀石墨（EG）及氢氧化铝（ATH）复配添加到天然橡胶（NR）中制备阻燃NR硫化胶,考察了TGD/DMMP/EG/ATH复配阻燃剂对NR硫化胶的阻燃性能、热稳定性及物理机械性能的影响。结果表明,TGD/DMMP/EG/ATH复配阻燃剂可有效提升NR硫化胶的阻燃性能和热稳定性,并降低燃烧过程中的热释放速率。当TGD/DMMP/EG/ATH复配阻燃剂的用量为60份（质量）时,NR硫化胶的极限氧指数可达28.4%,残炭质量分数可达25.61%,热释放速率可降低95%,总热释放量可降低21%。TGD/DMMP/EG/ATH复配阻燃剂对NR硫化胶的物理机械性能影响不大。     

膨胀阻燃聚乙烯的研究

将可膨胀石墨（EG）和传统的膨胀阻燃剂（IFR）用于制备膨胀阻燃聚乙烯（PE）,采用极限氧指数对其阻燃性能进行了研究,探讨了2种阻燃剂之间的协同阻燃作用,并采用差示扫描量热仪和红外光谱对其热降解过程和炭层结构分别进行了分析。结果表明,EG和IFR对PE具有很好的协同阻燃作用,当其配比为1:1时,膨胀阻燃PE可获得较佳的阻燃性能,阻燃剂用量仅为30份就可使膨胀阻燃PE的极限氧指数达到31.5 %,远高于单一阻燃体系;在热降解过程中,复合膨胀阻燃体系仍表现出EG和IFR的特征降解过程,热降解成炭由二者的热降解产物构成,证实了二者之间的物理作用机理,物理膨胀炭层和化学膨胀炭层的结合有效增加了炭层的隔热、隔氧作用,有利于阻燃性能的改善。     

Study on char reinforcing of different inorganic fillers for expandable fire resistance silicone rubber

Sodium silicate monohydrate (NSH), glass frits (GF) and aluminum hydroxide (ATH) were incorporated into room temperature vulcanized (RTV) silicone rubber (SR) as char reinforcing materials to improve the fire resistance of intumescent flame retardant silicone rubber. SR composites containing only intumescent flame retardant such as phosphorus nitrogen composite flame retardant (NH₂-C) and expandable graphite (EG) were used as comparison samples. Limiting oxygen index (LOI) test, vertical burning test (UL-94), flame resistance test, scanning electron microscopy (SEM) and X-ray diffraction spectroscopy tests, as well as volume variation and compression strength of char residues were used to discuss the effects of the above-mentioned fillers on the fire resistance, char residue strength and char integrity of SR composites. The results showed that SR composite filled with only intumescent flame retardants EG and NH₂-C had excellent flame retardancy. After adding ATH, the char residue was relatively dense and had good compressive strength, but its thermal insulation performance was reduced. GF or NSH reduced the flame retardancy of SR composites, but it obviously played a role in binding combustion residues, forming new crystals and improving the stability of char residues.     

Enhanced fire behavior of rigid polyurethane foam by intumescent flame retardants

Using expandable graphite (EG) and ammonium polyphosphate (APP) as flame retardants, we prepared two series of polyisocyanurate–polyurethane (PIR–PUR) foams (i.e., EG foams filled with different amounts of EG alone and APEG foams containing different amounts of expanded EG and APP) and evaluated the effect of the additives on the physical–mechanical property, fire behavior and thermal stability of the foams based on compressive strength test, limiting oxygen index (LOI), cone calorimeter test, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The addition of EG alone or both EG and APP into the foam greatly influences the physical–mechanical property. The compressive strength of APEG foams is closely related to the apparent density. The LOI value showed good improvement in both EG and APEG foams. The addition of APP in APEG foams gave better fire behavior than the EG foams with an obvious decrease in PHRR and increase in residue. In addition, the TGA curves illustrated that APP might be an effective charring agent to promote char formation. The SEM results showed that the incorporation of APP and EG allowed the formation of a cohesive and dense char layer, which inhibited the transfer of heat and combustible gas and increased the thermal stability of PIR‐PUR. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synergistic effect of expandable graphite and aluminum hypophosphite on flame‐retardant properties of rigid polyurethane foam

A series of flame retarding rigid polyurethane foam (RPUF) composites based on expandable graphite (EG) and aluminum hypophosphite (AHP) were prepared by the one‐pot method. The properties were characterized by limiting oxygen index (LOI) test, cone calorimeter test, thermogravimetric analysis (TGA), real‐time Fourier transform‐infrared spectra (RT‐FT‐IR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), etc. The results indicate that both EG and AHP could enhance the flame retardency of RPUF composites. Besides, the flame retardant effect of EG was better than that of AHP. The results also show that partial substitution of EG with AHP could improve the flame retardency of RPUF, and EG and AHP presented an excellent synergistic effect on flame retardancy. What is more, compared with RPUF/20EG and RPUF/20AHP, the heat release rate (HRR) and total heat release (THR) of RPUF/15EG/5AHP were lower.TGA results indicate that partial substitution of EG with AHP could improve the char residue which provided better flame retardancy for RPUF composites. The thermal degradation process of RPUF composites and the chemical component of the char residue were investigated by RT‐FT‐IR and XPS. And the results prove that RPUF/15EG/5AHP had higher heat resistance in the later stage. Compared with the RPUF composites filled with EG, a better cell structure and mechanical properties were observed with the substitution of AHP for part of EG. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42842.     

Bi-phase flame-retardant effect of hexa-phenoxy-cyclotriphosphazene on rigid polyurethane foams containing expandable graphite

The flame-retardant rigid polyurethane (PU) foams with hexa-phenoxy-cyclotriphosphazene/expandable graphite (HPCP/EG) were prepared through box-foaming in our laboratory. The flame retardancy of PU foams was characterized using the limiting oxygen index and cone calorimeter. The results show that the incorporation of HPCP into the PU foams containing EG enhanced flame retardancy. The main degradation process of HPCP in PU foams was investigated by pyrolysis gas chromatography/mass spectroscopy. HPCP during combustion generated phenoxyl and PO₂ free radicals, which could quench the flammable free radicals produced by the matrix and hamper the free radical chain reaction of combustion. This observation shows that HPCP produced a gas-phase flame-retardant effect in this specimen. Additionally, micro-morphology, elemental composition and content of residual char of the flame-retardant PU foams after the cone calorimeter test were also characterized using scanning electron microscope and energy dispersive X-ray microanalyser. The results exhibit that the partial phosphorus from HPCP remained in the residual char, and HPCP significantly enhanced the strength and compatibility of the char layer formed by the PU foams containing EG. These results indicate the important function of HPCP in condensed phase. Thus, HPCP exhibited gas-phase and condensed-phase flame-retardant effects on the PU/EG foams.     

Synergistic effect of expandable graphite and α‐type zirconium phosphate on flame retardancy of polyurethane elastomer

Organically modified zirconium phosphate (OZrP) was prepared by cation exchange of natural counterions with hexadecyltri‐n‐butylphosphonium bromide. Subsequently, OZrP and expandable graphite (EG) were incorporated into polyurethane elastomer (PUE), and the thermal stability and flame retardancy of PUE composites were investigated. The thermogravimetric analysis indicated that partial substitution of EG with OZrP could improve both the thermal stability and char yield of PUE composites. The cone calorimetry and limiting oxygen index test showed that partial substitution of EG with OZrP could further enhance the flame retardancy of PUE composites and presented an excellent synergistic effect. Moreover, the char residue of PUE composites was analyzed by X‐ray photoelectron spectroscopy and laser Raman spectroscopy. Their results indicated that the synergistic effect of the physical barrier to prevent transmission of heat and mass between condensed and gas phases. Therefore, the further combustion of the nether material could be inhibited, which created better flame retardancy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45188.     

Synergistic effects of aluminum hydroxide on improving the flame retardancy and smoke suppression properties of transparent intumescent fire-retardant coatings

A series of novel aluminum phosphate ester (APEA) flame retardants were synthesized by the salification of cyclic phosphate ester acid (PEA) with different mass ratios of aluminum hydroxide (ATH) and thoroughly characterized by Fourier transform infrared (FTIR) spectroscopy and ¹H nuclear magnetic resonance spectroscopy. The PEA and APEAs were thoroughly mixed with melamine formaldehyde resin to produce five kinds of transparent fire-retardant coatings. The synergistic effects of ATH on the thermal stability, flame retardancy, and smoke suppression properties of the coatings were investigated by different analytical instruments. The results show that the incorporation of ATH greatly decreases the weight loss, char index, flame spread rating, heat release rate, total heat release, smoke production rate, total smoke release and specific optical density in the coatings applied to plywood boards, which is ascribed to a more compact and intumescent char formed during burning, as determined from digital photographs and scanning electron microscopy images. The synergistic effects of ATH in the coatings depend on the content of ATH, and an excessive amount of ATH diminishes the synergistic effects on the flame retardancy and smoke suppression properties based on fire protection tests and cone calorimeter test. Thermo-gravimetric analysis reveals that the thermal stability and char-forming ability of the coatings gradually improve with increasing loading of ATH. FTIR analysis demonstrates that the incorporation of ATH forms a more phosphorus-rich crosslinked char and aromatic char during burning, thus effectively reducing the mass loss, heat release, and smoke production and exhibiting excellent synergistic flame retardant and smoke suppression effects in the coatings.     

Expandable graphite in polyurethane foams: The effect of expansion volume and intercalants on flame retardancy

Several expandable graphites (EGs), differing in expansion volume but with the same mean size, are compared as flame retardants in polyurethane (PUR) foams. Not only common sulfur‐intercalated graphites are investigated but also a new one intercalated with phosphorus. The main aim of this article is to understand which properties of EG are important for its flame retardancy effectiveness in PUR foams. Thermal stability, flammability, and fire behavior are analyzed through limiting oxygen index and cone calorimeter tests. Detailed characterization of the phosphorus‐intercalated graphite is also provided as well as physical–mechanical characterization. The results show that the well‐known sulfur‐intercalated graphites and the one with phosphorus both enhance the residue yield, induce a protective layer, and thus efficiently flame‐retard PUR foams. While the expansion volume of the EGs had a surprisingly limited influence on the performance of the foams, at least in the range tested, the most important feature controlling the effectiveness of EG in terms of flame retardant PUR foams was the type of intercalant. The presence of EG affected the physical–mechanical properties of the foams; however, no significant effect of the expansion volume or intercalant type has been revealed on the physical–mechanical properties of the foams. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45173.     

Preparation of aluminum hydroxide/aluminum phosphinate flame‐retardant poly(vinyl alcohol) foam through thermal processing

A novel flame‐retardant poly (vinyl alcohol) (PVA) composite foam was prepared successfully through thermal processing, which was filled with high content of flame retardant, based on aluminum hydroxide (ATH) and aluminum phosphinate (AlPi) and using water as plasticizer and blowing agent. The flame‐retardant property and mechanism of the prepared foam matrix were studied by vertical burning test, limiting oxygen index (LOI), cone calorimeter, scanning electronic microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The experimental results showed that the PVA/ATH/AlPi (1/1.2/0.05) composite achieved LOI value of 41% and UL94 V‐0 (3.2 mm) rate. The addition of ATH and AlPi into PVA matrix significantly decreased flammability of the composites, because a more compact and continuous char layer of the PVA/ATH/AlPi composite could be formed, due to the involvement of AlPi in the char‐forming reaction. Compared with the pure PVA sample, the peak heat release rate (PHRR) and total heat release (THR) of PVA/ATH/AlPi (1/1.2/0.05) composite were reduced by 76.5% and 58.2%, respectively. Built upon this PVA‐based foam matrix with good flame retardancy, the flame‐retardant PVA‐based foam was successfully prepared through thermal extrusion. In addition, the influence of water content on melt viscosity, foam structure and mechanical strength was also analyzed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42020.     

Flame‐retardant properties of acrylonitrile–butadiene–styrene/wood flour composites filled with expandable graphite and ammonium polyphosphate

Expandable graphite (EG) and ammonium polyphosphate (APP) were used to improve the flame retardancy of acrylonitrile–butadiene–styrene based wood–plastic composites (WPCs). A synergistic effect between EG and APP on the flame retardancy of the WPCs was proposed. The results show that the highest limited oxygen index (LOI) of 34.2% and a V‐0 rating were achieved when the ratio of EG to APP 12.5:7.5; this comprised 20 wt % of the total amount. However, LOI values of the samples with EG and APP alone were only 30.5 and 24.5%, respectively. Thermogravimetric analysis indicated that the flame retardants improved the amount of residue. The EG and EG/APP additives greatly decreased the peak heat release rate and suppressed smoke according to cone calorimetry testing. The scanning electron microscopy analysis indicated that the surface of the wormlike char was covered with a granular substance, which may have been the viscous phosphoric acid or poly(phosphoric acid) decomposed from APP. The flame‐retardant additives worsened the mechanical properties of the WPCs. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40281.     

TPU/ATH/云母复合材料的制备及阻燃性能研究

以经表面处理或未经表面处理的氢氧化铝(ATH)与云母、热塑性聚氨酯弹性体(TPU)制备复合材料。采用垂直燃烧法和极限氧指数法研究了TPU/ATH和TPU/ATH/云母复合材料的阻燃性能,考察了ATH及云母的用量对复合材料的阻燃性的影响。结果表明：当TPU与ATH质量比为100/（70~80）时,复合材料具有很好的阻燃性能;经表面处理的ATH可以进一步改善复合材料的阻燃性能;云母的加入不影响复合材料的阻燃性能,但能改善其加工性能,降低产品价格。     

氢氧化铝对乙烯-丙烯酸丁酯共聚物力学与阻燃性能及热降解行为的影响

采用极限氧指数、热重分析（TG）和差示扫描景热分析（DSC）等技术和手段研究了乙烯-丙烯酸丁酯共聚物（EBA）／氢氧化铝（ATH）复合材料的阻燃性能和热降解行为，探讨了ATH的添加量对EBA力学性能和熔体流动速率的影响。实验数据表明，ATH的引入能恶化材料的力学性能和加工性能；但可提高材料的阻燃性能，当ATH的添加量为60％时，阻燃材料的极限氧指数可达33．1％。ATH提高了EBA在高温下的热稳定性，降低了EBA的热降解速率，扩大了热失熏温度范围。ATH以吸热方式在凝缩相和气相中发挥阻燃作用；此外，ATH分解形成的活性Al2O3对EBA还具有成炭催化作用，在一定程度上显示出了ATH的凝缩相阻燃作用。     

Flame resistance and foaming properties of NBR compounds with halogen‐free flame retardants

Acrylonitrile butadiene rubber (NBR) foams compounded with various halogen‐free flame retardants were prepared. The influence of nonhalogen flame retardants on the flame resistance and foaming properties of the NBR compounds were investigated. The foaming properties (expandability 980%–1050%, closed‐cell structure) of NBR compounds with expandable graphite (EG) and ammonium polyphosphate (APP) flame retardants were similar to the NBR base compounds which contained primarily aluminum hydroxide (ATH). The heat release capacity (HRC) ranged from 10 to 74 J/g‐K, the average heat release rate (A‐HRR) ranged from 8 to 60 kW/m², and the total heat release (THR) ranged from 2.6 to 7.3 MJ/m² for the nonhalogenated NBR foams with closed‐cell structure and were significantly decreased upon increasing the amounts of flame retardants. This reduction is attributed to the hard char formation and production of water from the interaction with ATH. The limiting oxygen index (LOI) and time to ignition (TTI) show opposite results. The smoke density (0.050–0.037) of the NBR foams with EG flame retardant was decreased when compared to the NBR foam (0.107). The EG flame retardant was more effective than the phosphorus/nitrogen flame retardants in reducing the HRR and smoke density. The use of both ATH and EG is very effective in improving flame resistance. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

EG阻燃热固性聚苯乙烯泡沫保温板的性能

以可发性聚苯乙烯(EPS)为基材,利用酚醛树脂(PF)作为包覆剂,可膨胀石墨(EG)作为阻燃剂,利用包覆法,制备了一种无卤环保、阻燃性能好、力学性能优良的热固性PS外墙泡沫保温板。研究了PF与EG对EPS保温板阻燃及力学性能的影响,探究了阻燃机理。结果表明,使用PF作为包覆剂制得的EPS/PF泡沫保温板力学性能尤其是压缩强度明显提高,当PF用量为90份时,LOI值可由18%提升至27.9%;阻燃剂EG的加入,使得保温板的阻燃性能及压缩性能进一步提高,当添加4份的EG时,保温板的压缩强度最高,LOI值达到了29.4%,垂直燃烧等级达到V–0级,残炭率由纯EPS的10%提高到50%。     

Effect of the particle size of expandable graphite on the thermal stability,flammability, and mechanical properties of high‐density polyethylene/ethylene vinyl‐acetate/expandable graphite composites

In this article, high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites filled with two different particle sizes (45 and 150 µm) of expandable graphite (EG) were prepared by using a twin‐screw extruder. The thermal stability, flammability, and mechanical properties of HDPE/EVA/EG composites were investigated by thermogravimetric analysis (TGA), cone calorimeter test (CCT), tensile test, and scanning electron microscopy (SEM). The results from TGA and CCT indicated that EG significantly enhanced the thermal stability and fire resistance of HDPE/EVA blend. The thermal stability and flame retardancy of HDPE/EVA/EG composites were improved with decreasing particle size of EG. Although the onset of weight loss of the flame‐retardant composites occurred at a lower temperature than that of HDPE/EVA blend, the flame‐retardant composites produced a large amount of char residue at a high temperature. The consolidated char layer formed a barrier, which could reduce heat, low‐molecular transfer, and air incursion, and thus enhanced the flame retardancy. The data from the tensile test showed that the addition of EG deteriorated the mechanical properties; however, the tensile stress and strain of HDPE/EVA/EG composites increased with decreasing the particle size of EG owing to the strong interface adhesion between polymer matrix and inorganic particles. POLYM. ENG. SCI., 54:1162–1169, 2014. © 2013 Society of Plastics Engineers     

Expandable graphite encapsulated by magnesium hydroxide nanosheets as an intumescent flame retardant for rigid polyurethane foams

Encapsulation of expandable graphite (EG) particles by organic or inorganic shells has been proved to efficiently enhance the expandability of EG, and thus to improve the flame‐retardant efficiency of EG. In this study, magnesium hydroxide (MH) nanosheets were utilized to fabricate core–shell EG@MH flame‐retardant particles through a heterocoagulation method. It was observed that after the encapsulation by MH nanosheets, the edges of the char residue of the EG layer were sealed after combustion, which contributed to the enhancement of expandability. The expansion volume of EG@MH increased dramatically to 456 mL/g, in contrast to 338 mL/g for pure EG. By incorporating 11.5 wt % of flame‐retardant particles, polyurethane foam containing EG@MH (here PU‐EG@MH) displayed excellent flame retardancy. Compared with the physically mixed sample, PU‐EG+MH, the limiting oxygen index value for the PU‐EG@MH sample increased from 29.8% to 32.6%. Furthermore, the shell of MH nanosheets was beneficial for improving the interfacial adherence between EG and the rigid polyurethane foam (RPUF) matrix, due to the reaction between isocyanate functional groups and MH. The cell structure and storage modulus of PU‐EG@MH were improved. In other words, the shell of MH nanosheets successfully improved the flame‐retardant efficiency and enhanced the interface adhesion between EG and the matrix. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46749.     

Lightweight and flame retardant fluorosilicone rubber composited foam prepared by supercritical nitrogen

Improving the flame retardancy and lightweight of fluorosilicone rubber (FSR) foam is important for its application in aerospace, rail transportation, petrochemical equipment, etc. In this work, ammonium polyphosphate (APP) and expandable graphite (EG) were used as synergistic flame retardants, and the lightweight FSR composite foam with flame retardancy was prepared by supercritical N₂ foaming. When there were 12.5 phr APP and 7.5 phr EG, the composite foam with density of 0.254 g/cm³ showed superiority in foaming performance and flame retardancy, and the limit oxygen index was 36.4%, the UL-94 grade reached V-0, the ignition time was 12 s and the fire performance index was 0.071 s·m²/kW. In addition, the aging, oil and solvent resistance of FSR foam was not affected. This work provided data support for the production and application of the flame retardant FSR foam.     

EG与IFR复合阻燃EVA的动态燃烧性能和协同效应

将可膨胀石墨(EG)与P-N膨胀阻燃剂(IFR)复合阻燃EVA树脂,通过氧指数(OI)、垂直燃烧测试(UL94)、锥形量热仪(CONE)研究了EG与IFR复合阻燃EVA的协同效应。结果表明:阻燃剂总添加量为30 phr,随着其中EG含量的增加,OI呈先增加后下降趋势,确定EG:IFR=1:1为最佳配比,OI达到36.6%,UL94为V-0级;EG与IFR复合阻燃EVA,热释放速率曲线呈现"前单峰型",为凝聚相阻燃机理;燃烧后形成的炭层结构较致密,表现出一定的协同作用。     

Synergistic effect between zeolitic imidazolate framework-8 and expandable graphite to improve the flame retardancy and smoke suppression of polyurethane elastomer

Zeolitic imidazolate framework-8 (ZIF-8) was synthesized at room temperature, and then added with expandable graphite (EG) to polyurethane elastomer (PUE) to study their flame retardancy and smoke suppression of PUE. The results showed that when the total flame retardant was 3 wt % and the ratio of ZIF-8 and EG was 1:3, it had the best effect on the flame retardancy and smoke suppression of PUE. Compared with pure PUE, the peak heat release rate, the total heat release, and the maximum smoke density values of Z1E3 decreased by 83.4, 42.6, and 22.4%, respectively. Moreover, the limited oxygen index value of Z1E3 increased to 30.2% and its UL-94 vertical burning test reached V-1 rating. This was because ZIF-8 synergized with EG to make the intumescent char layer compact, resulting in improved flame retardancy and smoke suppression of PUE. The specific mechanism of flame retardancy and smoke suppression is also discussed in this article. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48048.