Grafting of hydrophilic monomers onto aminopropyl‐functionalized sodium montmorillonite via surface‐initiated redox polymerization

Hydrophilic polymer/sodium montmorillonite (Na‐MMT) hybrid nanomaterials were prepared via surface‐initiated redox polymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (PAMPS‐g‐MMT), acrylamide (PAAm‐g‐MMT) and styrenesulfonic acid sodium salt (PSSA‐g‐MMT) from surface of aminopropyl‐functionalized sodium montmorillonite (AMMT) dispersed in an aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and aminopropyl groups on the surface of AMMT were used as oxidant and reducing groups, respectively. AMMT was prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of Na‐MMT. Hydrophilic monomers (AMPS, AAm and SSA) were then grafted onto AMMT dispersed in water via redox initiation at 40 °C. Structure, morphology and thermal properties of the AMMT, PAMPS‐g‐MMT, PAAm‐g‐MMT and PSSA‐g‐MMT hybrid materials were characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric (TGA) analyses, respectively. FTIR results indicated that hydrophilic monomers were successfully grafted onto the surface of MMT. Grafting amounts of the hydrophilic polymers were estimated from TGA thermograms to be 28.8, 118.8 and 14.4% for PAMPS, PAAm and PSSA, respectively. XRD patterns showed an exfoliated morphology for PAMPS‐ and PAAm‐grafted MMT hybrid nanomaterials and an intercalated/exfoliated morphology for the PSSA‐grafted MMT one. The effect of the nature of hydrophilic monomer on the grafting efficiency is discussed in detail. © 2013 Society of Chemical Industry     

Study on superabsorbent composites. XVIII. Preparation,characterization, and property evaluation of poly(acrylic acid‐co‐acrylamide)/organomontmorillonite/sodium humate superabsorbent composites

A series of novel multifunctional poly (acrylic acid‐co‐acrylamide) (PAA‐AM)/organomontmorillonite (O‐MMT)/sodium humate (SH) superabsorbent composites were synthesized by the graft copolymerization reaction of partially neutralized acrylic acid and acrylamide on O‐MMT micropowder and SH with N,N′‐methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator in an aqueous solution. The superabsorbent composites were characterized by means of Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The effect of the relative weight ratio of SH to O‐MMT on the water absorbency was studied, and the results indicated that the best water absorbency of 591 g/g in distilled water was obtained when an O‐MMT content of 20 wt % and an SH content of 30 wt % were incorporated. The superabsorbent composite possessed a good capacity for water retention; even after 30 days, 24.4 wt % of water could still be saved by the sand soil containing 1.0 wt % superabsorbent composite. The results from this study show that the water absorbency of a superabsorbent composite is improved by the simultaneous introduction of O‐MMT and SH into a PAA‐AM network in comparison with the incorporation of only O‐MMT or SH. Also, in comparison with PAA‐AM/MMT/SH, an appropriate amount of O‐MMT can benefit the developed composites with respect to their water absorbency, salt resistance, and capacity for water retention in sand soil. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Improving properties of superabsorbent composite induced by using alkaline protease hydrolyzed‐sericin (APh‐sericin)

A series of superabsorbent polymer composites based on sericin hydrolyzed with alkaline protease (AP) were prepared by grafting with acrylic acid (AA) and acrylamide (AM). The properties of the superabsorbent polymers (SAP) by using hydrolyzed sericin with different amount of alkaline protease (nAPh‐sericin) were compared. It was found that the polymer prepared from 5APh‐sericin (the mass ratio of AP to sericin was 5.0 mg g⁻¹) showed the highest graft percentage and water absorbency, this phenomenon may be attributed to the change of molecular weight of resulting sericin molecules. The molecular structure of the grafted polymers was proved by thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) measurements. Comparing with PAA‐AM (poly AA‐co‐AM) and 0APh‐sericin/PAA‐AM polymer, 5APh‐sericin/PAA‐AM polymer had the most excellent water retention capacity and enzyme degradability. The morphological features of the polymers with different drying methods were evidenced by SEM images. The water absorbencies of 5APh‐sericin/PAA‐AM polymer prepared with freeze‐drying were 896 g g⁻¹ in deionized water, 424 g g⁻¹ in tap water, and 83 g g⁻¹ in 0.9 wt% aqueous NaCl solution. POLYM. COMPOS., 35:509–515, 2014. © 2013 Society of Plastics Engineers     

Study on superabsorbent composites. XXI. Synthesis,characterization and swelling behaviors of chitosan‐g‐poly(acrylic acid)/organo‐rectorite nanocomposite superabsorbents

A novel chitosan‐g‐poly(acrylic acid)/organo‐rectorite (CTS‐g‐PAA/OREC) nanocomposite superabsorbent was synthesized by aqueous polymerization using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Rectorite was organified with four different degree of hexadecyltrimethyl ammonium bromide, and the organification of rectorite was proved by FTIR and XRD. The effect of organification degree of rectorite on water absorbency of CTS‐g‐PAA/OREC with different organo‐rectorite content was investigated. The swelling behaviors in distilled water and various pH solutions were also studied. The results from IR spectroscopy and XRD data show that acrylic acid had been grafted polymerization with chitosan and organo‐rectorite and formed nanocomposite. Introducing organo‐rectorite into the CTS‐g‐PAA polymeric network can improved water absorbency and swelling rate of CTS‐g‐PAA/OREC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Superabsorbent composite XXII: Effects of modified sepiolite on water absorbency and swelling behavior of chitosan‐g‐poly(acrylic acid)/sepiolite superabsorbent composite

In this work, a series of chitosan‐g‐poly(acrylic acid)/sepiolite (CTS‐g‐PAA/ST) superabsorbent composites containing raw sepiolite, acid‐activated sepiolite, and cation‐exchanged sepiolite were synthesized by free‐radical graft polymerization in aqueous solution, using N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The effects of raw sepiolite, acid‐activated sepiolite, and cation‐exchanged sepoilite on equilibrium water absorbency, swelling rate, and swelling behavior in different pH value solution of superabsorbent composites were systematically investigated. The results from FTIR spectra showed that chitosan and sepiolite participated in graft polymerization reaction with acrylic acid. The introduction of acid‐activated and cation‐exchanged sepiolite into chitosan‐g‐poly(acrylic acid) polymeric network could improve water absorbency and swelling rate compared with that of the raw sepiolite. All prepared samples have similar swelling behavior in different pH solutions and the equilibrium water absorbencies of samples keep roughly constant in the pH range from 4 to 12. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Poly(acrylamide‐co‐vinyl alcohol)—Superabsorbent materials reinforced by modified clay

A series of copolymeric superabsorbent materials comprising polyacrylamide (PAM), polyvinyl alcohol (PVA) reinforced with variable wt% of modified clay were prepared. The copolymer/clay composite was characterized by Fourier transformed infrared, transmission electron microscopy, and scanning electron microscopy. The water absorbencies of poly(acrylamide‐co‐vinyl alcohol)/clay composites were measured by calculating their percentage swelling ratio. The effects of copolymerization, type of clay, and clay content on the water absorbencies were studied. The swelling was measured in acidic, alkaline, and saline condition to ensure its versatility. The results indicated a remarkable increase in swelling ratio by incorporation of modified clay having higher hydrophilicity and optimum clay loading. The poly(acrylamide‐co‐vinyl alcohol)/clay composite hydrogel was found to have better re‐swelling ability and water retention capacity compared to the virgin copolymer. The substantial enhancement of swelling properties enables the superabsorbent poly(acrylamide‐co‐vinyl alcohol)/clay suitable for agricultural and horticultural application. POLYM. COMPOS., 34:1794–1800, 2013. © 2013 Society of Plastics Engineers     

Preparation of starch‐graft‐poly(acrylamide)/attapulgite superabsorbent composite

A novel starch‐graft‐poly(acrylamide)/attapulgite superabsorbent composite was synthesized by graft copolymerization reaction of starch, acrylamide (AM), and attapulgite micropowder using N.N‐methylene‐bisacrylamide (MBA) as a crosslinker and ammonium persulphate (APS) as an initiator in aqueous solution, followed by hydrolysis with sodium hydroxide. The effects on water absorbency, such as amount of crosslinker, initiator, attapulgite, weight ratio of acrylamide to starch in the feed, gelatinization conditions of starch and molar ratio of NaOH to acrylamide, and so forth, were investigated. These superabsorbent composites were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The water absorbencies for these superabsorbent composites in water and saline solution were investigated, and water retention tests were carried out. Results obtained from this study showed that the water absorbency of superabsorbent composite synthesized under optimal synthesis conditions with an attapulgite content of 10% exhibit absorption of 1317 g H₂O/g sample and 68 g H₂O/g sample in distilled water and in 0.9 wt % NaCl solution, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1351–1357, 2005     

Plasma‐induced solid‐state polymerization modified poly(tetrafluoroethylene) membrane for pervaporation separation of aqueous alcohol mixtures

Acrylamide (AAm) solid state polymerization was induced using argon plasma to improve the pervaporation performance of poly(tetrafluoroethylene) (PTFE) membranes (PTFE‐g‐PAAm) in aqueous alcohol mixtures. The surface morphology, chemical composition, and hydrophilicity changes in the PTFE and PTFE‐g‐PAAm membranes were investigated using ATR‐FTIR, SEM, AFM, X‐ray photoelectron spectroscopy, and water contact angle measurements. The surface hydrophilicity rapidly increased with increasing Ar exposure time, but decreased after longer Ar exposure time because of the degradation in the PTFE‐g‐PAAm membrane grafted layer. Compared with the hydrophilicity of the pristine PTFE membrane (water contact angle = 120°), the argon plasma induced acrylamide (AAm) solid‐state polymerization onto the PTFE surface (water contact angle = 43.3°) and effectively improved the hydrophilicity of the PTFE membrane. This value increases slowly with increasing aging time and then reaches a plateau value of about 50° after 10 days of storage under air. The pervaporation separation performances of the PTFE‐g‐PAAm membranes were higher than that of the pristine PTFE membrane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:909–919, 2006     

Synthesis and characterization of chitosan‐graft‐poly(acrylic acid)/nontronite hydrogel composites based on a design of experiments

A 2^4–1 fractional factorial design was used to evaluate the effect of some parameters, such as the acrylic acid (AA)/chitosan (CTS) molar ratio, crosslinker concentration, initiator concentration, and filler concentration, in the swelling capacity of superabsorbent hydrogel composites based on CTS‐graft‐poly(acrylic acid) and nontronite clay. The data from wide‐angle X‐ray scattering and Fourier transform infrared spectroscopy confirmed the syntheses of the hydrogel composites. Main and interaction effects were analyzed by analysis of variance, F tests, and p values. We found that the AA/CTS and crosslinker were the most influential effects in the evaluated response. The proposed statistical model presented a high coefficient of determination (R² = 0.985). In addition to the swelling kinetics, the effects of pH and salt for the both compositions (with and without filler), which presented the best water uptake, were evaluated. Both hydrogels showed responsive behavior in relation to the pH and the salt solution, presenting good potential for application as devices in the controlled release of solutes. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Enhanced swelling and methylene blue adsorption of polyacrylamide‐based superabsorbents using alginate modified montmorillonite

Polyacrylamide/sodium alginate modified montmorillonite (PAM/SA‐MMT) superabsorbent composites were synthesized by free‐radical polymerization under normal atmospheric conditions. They were characterized by X‐ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy (FTIR). Their water absorbency and methylene blue (MB) adsorption behaviors were studied. Compared with PAM/MMT composites, PAM/SA‐MMT composites demonstrated greater water absorbency (863 g g^?1 in distilled water and 101 g g^?1 in 0.9 wt % NaCl solution) and higher adsorption capacity of 2639 mg g^?1 for MB. The adsorption behaviors of the composites showed that the isotherms and adsorption kinetics were in good agreement with the Langmuir equation and pseudo‐second‐order equation, respectively. FTIR analysis suggested that the MB adsorption of PAM/SA‐MMT composites via a mechanism combined electrostatic, H‐bonding and hydrophobic interaction. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40013.     

Study on superabsorbent composites. IX: Synthesis,characterization and swelling behaviors of polyacrylamide/clay composites based on various clays

A series of clay-based superabsorbent composite from acrylamide (AM) and various clays, such as attapulgite, kaolinite, mica, vermiculate and Na⁺-montmorillonite, was prepared by free-radical aqueous polymerization, using N,N′-methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate (APS) as an initiator, and then saponified with sodium hydroxide solution. In this paper, the reaction mechanism and thermal stability of the superabsorbent composites incorporated with various clays were characterized by FTIR, XRD and TGA, respectively. The effects of clay kind and clay content on equilibrium water absorbency of these composites were also investigated and compared. In addition, the influences of clay kind on comprehensive swelling behaviors of the PAM/clay superabsorbent composites were studied. The results indicated that the introduced clays could influence physicochemical properties of obtained superabsorbent composites. Mica could improve thermal stability of corresponding superabsorbent composites to the highest degree comparing with the other clays. The PAM/clay superabsorbent composites incorporated with 10 wt% clay of various kinds were all endowed with equilibrium water absorbency of more than 1300 g g⁻¹. The equilibrium water absorbency decreases with increasing clay content and correlates with the kind of clay. Attapulgite-based superabsorbent composite was endowed with higher water absorbency in univalent cationic saline solution, however, the vermiculite- and the kaolinite-based ones acquired the highest water absorbency in CaCl₂ and FeCl₃ aqueous solution, respectively. Moreover, the superabsorbent composites incorporated with Na⁺-montmorillonite have higher swelling rate and that of doped with mica was endowed with higher reswelling capability.     

Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fast‐swelling oxidized starch phosphate–poly(acrylate/acrylamide/2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid) superabsorbent composite

A fast‐swelling superabsorbent composite was prepared by solution polymerization of acrylate, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid and oxidized starch phosphate. Ethanol, propyl alcohol, butyl alcohol, and sodium bicarbonate were used as foaming agents to produce fast‐swelling characteristics. The structure of the superabsorbent composite was characterized using Fourier transform infrared spectroscopy (FTIR). The influences of the amount of water, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid, oxidized starch phosphate, initiator, and trihydroxymethyl propane glycidol ether, as well as the neutralization degree of acrylic acid on the equilibrium swelling degree and swelling rate of the superabsorbent composite, were investigated. The equilibrium swelling degree of the superabsorbent composite prepared in a 0.9 wt% NaCl aqueous solution was 52 g g^?1, and the swelling rate reached 0.86 mL g^?1 s^?1. The swelling kinetics was also investigated, and the results indicate that swelling of the superabsorbent composites obeys Schott's pseudo second‐order kinetics model. POLYM. ENG. SCI., 56:1267–1274, 2016. © 2016 Society of Plastics Engineers     

Polyacrylamide‐g‐alginate‐based electrically responsive hydrogel for drug delivery application: Synthesis,characterization, and formulation development

An electrically responsive hydrolyzed polyacrylamide‐grafted‐sodium alginate (H‐PAAm‐g‐SA)‐based membrane‐controlled transdermal drug delivery systems were developed and evaluated. The grafting reaction was confirmed by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. On application of electric stimulus, the swollen H‐PAAm‐g‐SA hydrogel was deswelled in the vicinity of electrodes. The drug release was greater in the presence of electric stimulus when compared with passive diffusion, and it was found to be dependent on the applied electric current strength, concentration of H‐PAAm‐g‐SA copolymer in the reservoir, and cross‐link density of rate‐controlling membrane. A pulsatile pattern of drug release was observed when the electric stimulus was switched “on” and “off.” The skin histopathology study suggested that, after application of an electrical stimulus, changes were in the structure of stratum corneum. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Study on superabsorbent composite. XX. Effects of cation‐exchanged montmorillonite on swelling properties of superabsorbent composite containing sodium humate

In this work, the effects of different cation‐exchanged montmorillonite on water absorbency of poly(acrylic acid‐co‐acrylamide)/montmorillonite/sodium humate (PAA‐AM/MMT/SH) superabsorbent composite were systematically investigated under the same preparation conditions. The superabsorbents doped with different cation‐exchanged montmorillonite were characterized by Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy technologies. Swelling behaviors of developing superabsorbent composite in various cationic saline solutions (NaCl, CaCl₂, and FeCl₃) were also investigated. The water absorbencies of superabsorbent composite with 20 wt% MMT and 30 wt% SH are 638, 723, 682, and 363 g g⁻¹ in distilled water for incorporating natural Na⁺‐MMT, Li⁺‐exchanged MMT, Ca²⁺‐exchanged MMT, and Al³⁺‐exchanged MMT, respectively. The results showed that the cation‐exchange process had some obvious influences on final water absorbency of superabsorbent composite. NaCl, CaCl₂, and FeCl₃ solutions did not alter the swelling characteristics of the superabsorbent materials at a concentration of less than 0.01 mM, however, a concentration of greater than 0.1 mM caused a collapse in the swelling curves. The excellent swelling‐reswelling‐swelling behavior and lower swelling rate testified that Al³⁺‐exchanged MMT can act as an assistant crosslinker in the polymeric network. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization and swelling behaviors of hydroxyethyl cellulose‐g‐poly(acrylic acid)/attapulgite superabsorbent composite

In this work, a series of novel hydroxyethyl cellulose‐ g‐poly(acrylic acid)/attapulgite (HEC‐g‐PAA/APT) superabsorbent composites were prepared through the graft polymerization of hydroxyethyl cellulose (HEC), partially neutralized acrylic acid (AA), and attapulgite (APT) in aqueous solution, and the composites were characterized by means of Fourier‐transform spectroscopy, scanning electron microscopy, and transmission electronmicroscopy. The effects of polymerization variables including concentrations of the initiator and crosslinker and APT content on water absorbency were studied, and the swelling properties in various pH solutions as well as the swelling kinetics in various saline solutions were also systematically evaluated. Results showed that the introduction of 5 wt% APT into HEC‐g‐PAA polymeric network could improve both water absorbency and water absorption rate of the superabsorbent composites. In addition, the superabsorbent composites retained high water absorbency over a wide pH range of 4–10, and the swelling kinetics of the superabsorbent composites in CaCl₂ and FeCl₃ solutions exhibited a remarkable overshooting phenomenon. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Swelling study of superabsorbent PAA‐co‐PAM/clay nanohydrogel

A series of superabsorbent composites were prepared from acrylic acid (AA), acrylamide (AM), and Cloisite® 30B by aqueous solution polymerization technique using ammonium peroxodisulfate (APS) as initiator. The interaction of the organically modified nanoclay with PAA‐co‐PAM copolymer was verified by FTIR, whereas the morphology of the composite was studied by Scanning Electron Microscopy (SEM). The water absorbency in deionized water and saline water of the synthesized nanohydrogels was measured by calculating their percentage swelling ratio. The effects of copolymerization, monomer ratio, clay content, and temperature on the water absorbency were studied. The results indicated a considerable increase in swelling ratio by proper monomer proportion and incorporation of optimum clay percentage into the copolymer matrix. It was found that the nanohydrogel acquired highest water absorbency with 2% clay loading. The reswelling ability and water retention capacity of the PAA‐co‐PAM hydrogel and PAA‐co‐PAM/clay nanohydrogel were also measured. The water absorbency was found to increase after each reswelling for which it may be useful as recyclable superabsorbent material. The results of water retention capacity of the nanohydrogel were also encouraging and find application in agriculture, especially in drought‐prone areas. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐sodium acrylate) superabsorbent polymers

A novel hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐Sodium Acrylate) (HECTS‐g‐(PAA‐co‐PSA)) superabsorbent polymer was prepared through graft copolymerization of acrylic acid and sodium acrylate onto the chain of hydroxyethyl chitosan. The structure of the polymer was characterized by FTIR. By studying the water absorption of the polymer synthesized under different conditions, the optimal conditions for synthesizing the polymer with the highest swelling ratio was defined. This superabsorbent polymer was further treated by the solvent precipitation method and by the freeze‐drying method. We found that the water absorption rate of the treated polymer was greatly increased and the microstructure of the treated polymer was changed from small pores to loose macro pores. The swelling processes of the polymers before and after modification fit first‐order dynamic processes. The amount of the residual acrylic acid was greatly decreased after treatments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Utilization of plant ash for the fabrication of novel superabsorbent composites with potassium‐release characteristics

Design and synthesis of the agricultural and ecological superabsorbent materials with cost‐efficient and fertilizer‐release characteristics has recently attracted considerable interests. In this work, the novel poly(sodium‐potassium acrylate‐co‐acrylamide)/plant ash (PNa‐KA‐co‐AM/PA) superabsorbent composites with potassium‐release characteristics were prepared using partially neutralized acrylic acid (Na‐KA), acrylamide (AM), and plant ash (PA) as raw materials, ammonium persulfate (APS) as the initiator, and N,N′‐methylenebisacrylamide (MBA) as the crosslinker. The structure, morphologies, and thermal stability of the composites were characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, and TGA techniques, respectively. The effects of MBA concentration and PA content on water absorbency were studied, and the swelling properties of the composites in saline solutions and various pHs solution as well as their potassium‐release capabilities were also evaluated. Results indicate that the composites exhibit better thermal stability, salt‐resistant performance, pH‐stability, and potassium‐release properties, and can act as a fertilizer and an effective water‐saving material for agricultural and ecological application. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010