Use of hydrochloric acid for determinining solid-phase arsenic partitioning in sulfidic sediments

We examined the use of room-temperature hydrochloric acid (1-6 M) and salt solutions of magnesium chloride, sodium carbonate, and sodium sulfide for the removal of arsenic from synthetic iron monosulfides and contaminated sediments containing acid-volatile sulfides (AVS). Results indicate that acid-soluble arsenic reacts with H2S released from AVS phases and precipitates at low pH as disordered orpiment or alacranite. Arsenic sulfide precipitation is consistent with geochemical modeling in that conditions during acid extraction are predicted to be oversaturated with respect to orpiment, realgar, or both. Binding of arsenic with sulfide at low pH is sufficiently strong that 6 M HCl will not keep spiked arsenic in the dissolved fraction. Over a wide range of AVS concentrations and molar [As]/[AVS] ratios, acid extraction of arsenic from sulfide-bearing sediments will give biased results that overestimate the stability or underestimate the bioavailability of sediment-bound arsenic. Alkaline solutions of sodium sulfide and sodium carbonate are efficient in removing arsenic from arsenic sulfides and mixed iron-arsenic sulfides because of the high solubility of arsenic at alkaline pH, the formation of stable arsenic complexes with sulfide or carbonate, or both.     

Landfill-stimulated iron reduction and arsenic release at the Coakley Superfund Site (NH)

Arsenic is a contaminant at more than one-third of all Superfund Sites in the United States. Frequently this contamination appearsto resultfrom geochemical processes rather than the presence of a well-defined arsenic source. Here we examine the geochemical processes that regulate arsenic levels at the Coakley Landfill Superfund Site (NH), a site contaminated with As, Cr, Pb, Ni, Zn, and aromatic hydrocarbons. Long-term field observations indicate that the concentrations of most of these contaminants have diminished as a result of treatment by monitored natural attenuation begun in 1998; however, dissolved arsenic levels increased modestly over the same interval. We attribute this increase to the reductive release of arsenic associated with poorly crystalline iron hydroxides within a glaciomarine clay layer within the overburden underlying the former landfill. Anaerobic batch incubations that stimulated iron reduction in the glaciomarine clay released appreciable dissolved arsenic and iron. Field observations also suggest that iron reduction associated with biodegradation of organic waste are partly responsible for arsenic release; over the five-year study period since a cap was emplaced to prevent water flow through the site, decreases in groundwater dissolved benzene concentrations at the landfill are correlated with increases in dissolved arsenic concentrations, consistent with the microbial decomposition of both benzene and other organics, and reduction of arsenic-bearing iron oxides. Treatment of contaminated groundwater increasingly is based on stimulating natural biogeochemical processes to degrade the contaminants. These results indicate that reducing environments created within organic contaminant plumes may release arsenic. In fact, the strong correlation (>80%) between elevated arsenic levels and organic contamination in groundwater systems at Superfund Sites across the United States suggests that arsenic contamination caused by natural degradation of organic contaminants may be widespread.     

Removal of arsenic from groundwater by zerovalent iron and the role of sulfide

Several recent investigations have shown encouraging potential for the removal of arsenic (As) from groundwater by granular zerovalent iron (Fe0). In contrast to previous studies conducted, we have investigated the applicability of this method and the nature of As bonding under conditions with dissolved sulfide. Three column tests were performed over the period of 1 year using solutions with either As(V) or As(II) (2-200 mg/L) in the input solution. Arsenic outflow concentrations decreased from initially 30-100 microg/L to concentrations of below 1 microg/L with time. XANES (X-ray absorptions near edge structure) and EXAFS (expanded X-ray absorption fine structure) spectra indicated that As in the solid phase is not only directly coordinated with oxygen, as is the case in adsorbed or coprecipitated arsenite and arsenate. Samples with high sulfur content showed additional bonding, for which Fourier transformations of EXAFS data exhibited a peak between 2.2 and 2.4 A. This bonding most likely originated from the direct coordination of sulfur or iron with As, which was incorporated in iron sulfides orfrom adsorbed thioarsenites. The formation of this sulfide bonding supports the removal of As by Fe0 because sulfide production by microbial sulfate reduction is ubiquitous in permeable reactive barriers composed of Fe0.     

Depositional influences on porewater arsenic in sediments of a mining-contaminated freshwater lake

Arsenic-containing minerals mobilized during mining activities and deposited to Lake Coeur d'Alene (CDA), Idaho sediments represent a potential source of soluble As to the overlying water. Our objective was to delineate the processes controlling porewater As concentrations within Lake CDA sediments. Sediment and porewater As concentrations were determined, and solid-phase As associations were probed using X-ray absorption near-edge structure (XANES) spectroscopy. Although maximum As in the sediment porewaters varied from 8.4 to 16.2 microM, As sorption on iron oxyhydroxides at the oxic sediment-water interface prevented flux to overlying water. Floods deposit sediment containing variable amounts of arsenopyrite (FeAsS), with majorfloods depositing large amounts of sediment that bury and preserve reduced minerals. Periods of lower deposition increase sediment residence times in the oxic zone, promoting oxidation of reduced minerals, SO4(2-) efflux, and formation of oxide precipitates. Depositional events bury oxides containing sorbed As, transitioning them into anoxic environments where they undergo dissolution, releasing As to the porewater. High Fe:S ratios limit the formation of arsenic sulfides in the anoxic zone. As a result of As sequestration at the sediment-water interface and its release upon burial, decreased concentrations of porewater As will not occur unless As-bearing erosional inputs are eliminated.     

Rates of hydrous ferric oxide crystallization and the influence on coprecipitated arsenate

Arsenate coprecipitated with hydrous ferric oxide (HFO) was stabilized against dissolution during transformation of HFO to more crystalline iron (hydr)oxides. The rate of arsenate stabilization approximately coincided with the rate of HFO transformation at pH 6 and 40 degrees C. Comparison of extraction data and X-ray diffraction results confirmed that hematite and goethite were the primary transformation products. HFO transformation was significantly retarded at or above an arsenate solid loading of 29 455 mg As/kg HFO. However, HFO transformation proceeded at a significant rate for arsenate solid loadings of 4208 and 8416 mg As/kg HFO. At a solid loading of 8416 mg As/kg HFO, XRD results suggested arsenate primarily partitioned to hematite. Comparison of HFO transformation rates observed in this research to rates obtained from the literature at pH 6 and temperatures ranging from 24 to 70 degrees C suggests that arsenate stabilization could be realized in oxic environments with a significantfraction of iron (hydr)oxides. While this process has not been documented in natural systems, the predicted half-life for transformation of an arsenic-bearing HFO is approximately 300 days at 25 degrees C at solid loading < 8415 mg As/kg HFO. The projected time frame for arsenate stabilization indicates this process should be considered during development of conceptual and analytical models describing arsenic fate and transport in oxic systems containing reactive iron (hydr)oxides. The likelihood of this process would depend on the chemical dynamics of the soil or sediment system relative to iron (hydr)oxide precipitation-dissolution reactions and the potential retarding/competing influence of ions such as silicate and organic matter.     

Arsenic removal with iron(II) and iron(III) in waters with high silicate and phosphate concentrations

Arsenic removal by passive treatment, in which naturally present Fe(II) is oxidized by aeration and the forming iron(III) (hydr)oxides precipitate with adsorbed arsenic, is the simplest conceivable water treatment option. However, competing anions and low iron concentrations often require additional iron. Application of Fe(II) instead of the usually applied Fe(III) is shown to be advantageous, as oxidation of Fe(II) by dissolved oxygen causes partial oxidation of As(III) and iron(III) (hydr)oxides formed from Fe(II) have higher sorption capacities. In simulated groundwater (8.2 mM HCO3(-), 2.5 mM Ca2+, 1.6 mM Mg2+, 30 mg/L Si, 3 mg/L P, 500 ppb As(III), or As(V), pH 7.0 +/- 0.1), addition of Fe(II) clearly leads to better As removal than Fe(III). Multiple additions of Fe(II) further improved the removal of As(II). A competitive coprecipitation model that considers As(III) oxidation explains the observed results and allows the estimation of arsenic removal under different conditions. Lowering 500 microg/L As(III) to below 50 microg/L As(tot) in filtered water required > 80 mg/L Fe(III), 50-55 mg/L Fe(II) in one single addition, and 20-25 mg/L in multiple additions. With As(V), 10-12 mg/L Fe(II) and 15-18 mg/L Fe(III) was required. In the absence of Si and P, removal efficiencies for Fe(II) and Fe(III) were similar: 30-40 mg/L was required for As(II), and 2.0-2.5 mg/L was required for As(V). In a field study with 22 tubewells in Bangladesh, passive treatment efficiently removed phosphate, but iron contents were generally too low for efficient arsenic removal.     

Geochemical cycling of arsenic in a coastal aquifer

Biogeochemically modified pore waters from subterranean estuaries, defined as the mixing zone between freshwater and saltwater in a coastal aquifer, are transported to coastal waters through submarine groundwater discharge (SGD). SGD has been shown to impact coastal and perhaps global trace metal budgets. The focus of this study was to investigate the biogeochemical processes that control arsenic cycling in subterranean estuaries. Total dissolved As, as well as a suite of other trace metals and nutrients, were measured in a series of wells and sediment cores at the head of Waquoit Bay, MA. Dissolved As ranged from below detection to 9.5 microg/kg, and was associated with plumes of dissolved Fe, Mn, and P in the groundwater. Sedimentary As, ranging from 360 to 7500 microg/kg, was highly correlated with sedimentary Fe, Mn, and P. In addition, amorphous Fe (hydr)oxides were more efficient scavengers of dissolved As than the more crystalline forms of solid-phase Fe. Given that dissolved As in the surface bay water was lower than within the subterranean estuary, our results indicate that the distribution and type of Fe and Mn (hydr)oxides in coastal aquifers exert a major influence on the biogeochemical cycling of As in subterranean estuaries and, ultimately, the fate of groundwater-derived As in marine systems influenced by SGD.     

Confounding impacts of iron reduction on arsenic retention

A transition from oxidizing to reducing conditions has long been implicated to increase aqueous As concentrations, for which reductive dissolution of iron (hydr)oxides is commonly implicated as the primary culprit. Confounding our understanding of processes controlling As retention, however, is that reductive transformation of ferrihydrite has recently been shown to promote As retention rather than release. To resolve the role iron phases have in regulating arsenic concentrations, here we examine As desorption from ferrihydrite-coated sands presorbed with As(III); experiments were performed at circumneutral pH under Fe-reducing conditions with the dissimilatory iron reducing bacterium Shewanella putrefaciens strain CN-32 over extended time periods. We reveal that with the initial phase of iron reduction, ferrihydrite undergoes transformation to secondary phases and increases As(III) retention (relative to abiotic controls). However, with increased reaction time, cessation of the phase transitions and ensuing reductive dissolution result in prolonged release of As(III) to the aqueous phase. Our results suggest that As(III) retention during iron reduction is temporally dependent on secondary precipitation of iron phases; during transformation to secondary phases, particularly magnetite, As(III) retention is enhanced even relative to oxidized systems. However, conditions that retard secondary transformation (more stable iron oxides or limited iron reducing bacterial activity), or prolonged anaerobiosis, will lead to both the dissolution of ferric (hydr)oxides and release of As(III) to the aqueous phase.     

Simultaneous release of metals and sulfide in lacustrine sediment

A single DGT (diffusive gradient in thin films) probe that could measure metals and sulfide simultaneously and at the same location was deployed in the surface sediment of a productive lake (Esthwaite Water). It contained a layer of AgI that binds sulfide overlying a layer of chelating resin that binds metals. Analysis for sulfide in two dimensions showed local sources of sulfide, 1-5 mm in diameter, at 8-11 cm depth within the sediment. A transect of trace metals measured at 100-microm intervals through the largest sulfide "hot spot" demonstrated concomitant release of Fe, Mn, Cu, Ni, and Co. Substantial supersaturation with respect to metal sulfides was observed for Fe and Co at the site of metal generation, but at a distance of less than 1 mm, solution concentrations were consistent with equilibration with amorphous FeS and CoS phases. Simple mass balance calculations were consistent with Fe being supplied from reductive dissolution of its oxides and with sulfide being supplied from reduction of sulfate. The observed concentrations of Cu, Ni, Co, and Mn could be accounted for by their release from iron oxides without invoking Mn reduction. The metals are removed rapidly (approximately 1 min) at the edge of the hot spot. These first observations of the simultaneous release of trace metals and sulfide are consistent with the known removal of metals by formation of their insoluble sulfides if the in situ kinetics of metal sulfide formation is on this time scale. The coproduction of reduced Fe and S suggests that iron- and sulfate-reducing bacteria may exist together in the same localized zone of actively decomposing organic matter.     

Deposition and fate of arsenic in iron- and arsenic-enriched reservoir sediments

Deposition of arsenic to the sediments of Haiwee Reservoir (Olancha, CA) has dramatically increased since March 1996 as a result of an interim strategy for arsenic management in the Los Angeles Aqueduct (LAA) water supply. Ferric chloride and cationic polymer are introduced into the Aqueduct at the Cottonwood treatment plant, 27 km north of the Haiwee Reservoir. This treatment decreases the average arsenic concentration from 25 microg/L above Cottonwood to 8.3 microg/L below Haiwee. Iron- and arsenic-rich flocculated solids are removed by deposition to the reservoir sediments. Analysis of sediments shows a pronounced signature of this deposition with elevated sediment concentrations of iron, arsenic, and manganese relative to a control site. Sediment concentrations of these elements remain elevated throughout the core length sampled (ca. 4% iron and 600 and 200 microg/g of manganese and arsenic, respectively, on a dry weight basis). A pore water profile revealed a strong redox gradient in the sediment. Manganese in the pore waters increased below 5 cm; iron and arsenic increased below 10 cm and were strongly correlated, consistent with reductive dissolution of iron oxyhydroxides and concurrent release of associated arsenic to solution. X-ray absorption near-edge spectroscopy revealed inorganic As(V) present only in the uppermost sediment (0-2.5 cm) in addition to inorganic As(III). In the deeper sediments (to 44 cm), only oxygen-coordinated As(III) was detected. Analysis of the extended X-ray absorption fine structure spectrum indicates that the As(III) at depth remains associated with iron oxyhydroxide. We hypothesize that this phase persists in the recently deposited sediment despite reducing conditions due to slow dissolution kinetics.     

Seasonal fluctuations in zinc speciation within a contaminated wetland

The cycling of common sorbents such as metal (hydr)- oxides, carbonates, and sulfides in redox-active environments influences the partitioning of associated trace elements such as zinc. Consequently, fluctuations in redox status may in part determine the availability and mobility of Zn and other trace elements. This research examines changes in Zn speciation in a contaminated wetland soil that undergoes seasonal flooding. X-ray absorption spectroscopy (XAS) was employed to identify and quantify Zn species from soil cores collected over a 1-year cycle as a function of water depth, location, and soil depth. Zinc associated with (hydr)oxide phases in dry, oxidized soils and with sulfides and carbonates in flooded systems. An increase in water level was accompanied by a reversible change in Zn fractionation toward ZnS and ZnC03. However, a small, recalcitrant fraction of Zn associated with (hydr)oxides remained even when the soils were exposed to highly reducing conditions. Water depth and redox potential were the most important factors in determining Zn speciation, although spatial variation was also important. These data indicate that zinc sorption is a dynamic process influenced by environmental changes.     

Investigating arsenic speciation and mobilization in sediments with DGT and DET: a mesocosm evaluation of oxic-anoxic transitions

Mobilization of arsenic from freshwater and estuarine sediments during the transition from oxic to anoxic conditions was investigated using recently developed diffusive sampling techniques. Arsenic speciation and Fe(II) concentrations were measured at high resolution (1-3 mm) with in situ diffusive gradients in thin films (DGT) and diffusive equilibration in thin films (DET) techniques. Water column anoxia induced Fe(II) and As(III) fluxes from the sediment. A correlation between water column Fe(II) and As(III) concentrations was observed in both freshwater (r(s) = 0.896, p < 0.001) and estuarine (r(s) = 0.557, p < 0.001) mesocosms. Porewater sampling by DGT and DET techniques confirmed that arsenic mobilization was associated with the reductive dissolution of Fe(III) (hydr)oxides in the suboxic zone of the sediment; a relationship that was visible because of the ability to measure the coincident profiles of these species using combined DGT and DET samplers. The selective measurement of As(III) and total inorganic arsenic by separate DGT samplers indicated that As(III) was the primary species mobilized from the solid phase to the porewater. This measurement approach effectively ruled out substantial As(V) mobilization from the freshwater and estuarine sediments in this experiment. This study demonstrates the capabilities of the DGT and DET techniques for investigating arsenic speciation and mobilization over a range of sediment conditions.     

Effect of oxide formation mechanisms on lead adsorption by biogenic manganese (hydr)oxides, iron (hydr)oxides, and their mixtures

The effects of iron and manganese (hydr)oxide formation processes on the trace metal adsorption properties of these metal (hydr)oxides and their mixtures was investigated by measuring lead adsorption by iron and manganese (hydr)oxides prepared by a variety of methods. Amorphous iron (hydr)oxide formed by fast precipitation at pH 7.5 exhibited greater Pb adsorption (gamma(max) = 50 mmol of Pb/mol of Fe at pH 6.0) than iron (hydr)oxide formed by slow, diffusion-controlled oxidation of Fe(II) at pH 4.5-7.0 or goethite. Biogenic manganese(III/IV) (hydr)oxide prepared by enzymatic oxidation of Mn(II) by the bacterium Leptothrix discophora SS-1 adsorbed five times more Pb (per mole of Mn) than an abiotic manganese (hydr)oxide prepared by oxidation of Mn(II) with permanganate, and 500-5000 times more Pb than pyrolusite oxides (betaMnO2). X-ray crystallography indicated that biogenic manganese (hydr)oxide and iron (hydr)oxide were predominantly amorphous or poorly crystalline and their X-ray diffraction patterns were not significantly affected by the presence of the other (hydr)oxide during formation. When iron and manganese (hydr)oxides were mixed after formation, or for Mn biologically oxidized with iron(III) (hydr)oxide present, observed Pb adsorption was similar to that expected for the mixture based on Langmuir parameters for the individual (hydr)oxides. These results indicate that interactions in iron/manganese (hydr)oxide mixtures related to the formation process and sequence of formation such as site masking, alterations in specific surface area, or changes in crystalline structure either did not occur or had a negligible effect on Pb adsorption by the mixtures.     

Reoxidation of reduced uranium with iron(III) (hydr)oxides under sulfate-reducing conditions

In cultures of Desulfovibrio desulfuricans 620 the effects of iron(III) (hydr)oxides (hematite, goethite, and ferrihydrite) on microbial reduction and reoxidation of uranium (U) were evaluated under lactate-limited sulfate-reducing conditions. With lactate present, G20 reduced U(VI) in both 1,4-piperazinediethanesulfonate (PIPES) and bicarbonate buffer. Once lactate was depleted, however, microbially reduced U served as an electron donor to reduce Fe(III) present in iron(III) (hydr)oxides. With the same initial amount of Fe(III) (10 mmol/L) for each iron(III) (hydr)oxide, reoxidation of U(IV) was greater with hematite than with goethite orferrihydrite. As the initial mass loading of hematite increased from 0 to 20 mmol of Fe(III)/L, the rate and extent of U(IV) reoxidation increased. Subsequent addition of hematite [15 mmol of Fe(III)/L] to stationary-phase cultures containing microbially reduced U(IV) also resulted in rapid reoxidation to U(VI). Analysis by U L3-edge X-ray absorption near-edge spectroscopy (XANES) of microbially reduced U particles yielded spectra similar to that of natural uraninite. Observations by high-resolution transmission electron microscopy, selected area electron diffraction, and energy-dispersive X-ray spectroscopic analysis confirmed that precipitated U associated with cells was uraninite with particle diameters of 3-5 nm. By the same techniques, iron sulfide precipitates were found to have a variable Fe and S stoichiometry and were not associated with cells.     

Arsenite retention mechanisms within estuarine sediments of Pescadero, CA

Arsenic, a toxic metalloid, is commonly associated with sulfide minerals in anoxic sediments. Here we characterize arsenic(III) retention on sediments from a sulfidic estuarine marsh using a series of sorption experiments, and probe the structure of retained arsenite with X-ray absorption spectroscopy. Although the extent of sorption varied with sampling locations, several adsorption characteristics were apparent. A fraction of arsenite adsorbed over the entire pH range examined, although it was most extensive at pH greater than 7, and conformed to a Langmuir isotherm. Iron sulfide phases were responsible for As partitioning in these sediments. Initially, an FeAsS-like precipitate formed with a structure similar to those reported for As(III) sorbed on iron sulfides, a complex that is highly reactive. Following reaction for 21 d, much of the FeAsS-like precipitate was converted to As2S3. A drop in the redox potential accompanied this conversion, suggesting that the evolution of sulfide and other reduced species stabilizes bound arsenic. Processes discerned in this study reveal the importance of sulfide minerals in As sequestration within anoxic environments.     

Arsenic redistribution between sediments and water near a highly contaminated source

Mechanisms controlling arsenic partitioning between sediment, groundwater, porewaters, and surface waters were investigated at the Vineland Chemical Company Superfund site in southern New Jersey. Extensive inorganic and organic arsenic contamination at this site (historical total arsenic > 10 000 microg L(-1) or > 130 microM in groundwater) has spread downstream to the Blackwater Branch, Maurice River, and Union Lake. Stream discharge was measured in the Blackwater Branch, and water samples and sediment cores were obtained from both the stream and the lake. Porewaters and sediments were analyzed for arsenic speciation as well as total arsenic, iron, manganese, and sulfur, and they indicate that geochemical processes controlling mobility of arsenic were different in these two locations. Arsenic partitioning in the Blackwater Branch was consistent with arsenic primarily being controlled by sulfur, whereas in Union Lake, the data were consistent with arsenic being controlled largely by iron. Stream discharge and arsenic concentrations indicate that despite large-scale groundwater extraction and treatment, > 99% of arsenic transport away from the site results from continued discharge of high arsenic groundwater to the stream, rather than remobilization of arsenic in stream sediments. Changing redox conditions would be expected to change arsenic retention on sediments. In sulfur-controlled stream sediments, more oxic conditions could oxidize arsenic-bearing sulfide minerals, thereby releasing arsenic to porewaters and streamwaters; in iron-controlled lake sediments, more reducing conditions could release arsenic from sediments via reductive dissolution of arsenic-bearing iron oxides.     

In situ remediation of arsenic in simulated groundwater using zerovalent iron: laboratory column tests on combined effects of phosphate and silicate

We performed three column tests to study the behavior of permeable reactive barrier (PRB) materials to remove arsenic under dynamic flow conditions in the absence as well as in the presence of added phosphate and silicate. The column consisted of a 10.3 cm depth of 50:50 (w:w, Peerless iron:sand) in the middle and a 10.3 cm depth of a sediment from Elizabeth City, NC, in both upper and lower portions of the 31-cm-long glass column (2.5 cm in diameter) with three side sampling ports. The flow velocity (upflow mode) was maintained at 4.3 m d(-1) during the 3-4-month experiments. As expected, dissolved As concentrations in different positions of the column generally followed the order: column influent > bottom port effluent > middle port effluent > top port effluent > column effluent. The steady-state As removal in the middle Peerless iron and sand mixture zone might be attributed to the continuous supply of corroded iron in the form of iron oxides and hydroxides that served as the sorbents for both As(V) and As(III). Consistent with previous batch study findings, dissolved phosphate (0.5 or 1 mg of P L(-1)) and silicate (10 or 20 mg of Si L(-1)) showed strong inhibition for As(V) and As(III) (1 mg of As(V) L(-1) + 1 mg of As(III) L(-1) in 7 mM NaCl + 0.86 mM CaSO4) removal by Peerless iron in the column tests. The presence of combined phosphate and silicate resulted in earlier breakthrough (C = 0.5C0) and earlier complete breakthrough of dissolved arsenic relative to absence of added phosphate and silicate in the bottom port effluent. Competition between As(V)/As(III) and phosphate/silicate forthe sorption sites on the corrosion products of Peerless iron seems to be the cause of the observations. This effect is especially important in the case of silicate for designing a PRB of zerovalent iron for field use because dissolved silicate is ubiquitous in terrestrial waters.     

Laboratory investigations of enhanced sulfate reduction as a groundwater arsenic remediation strategy

Landfills have the potential to mobilize arsenic via induction of reducing conditions in groundwater and subsequent desorption from or dissolution of arsenic-bearing iron phases. Laboratory incubation experiments were conducted with materials from a landfill where such processes are occurring. These experiments explored the potential for induced sulfate reduction to immobilize dissolved arsenic in situ. The native microbial community at this site reduced sulfate in the presence of added acetate. Acetate respiration and sulfate reduction were observed concurrent with dissolved iron concentrations initially increasing from 0.6 microM (0.03 mg L(-1)) to a maximum of 111 microM (6.1 mg L(-1)) and subsequently decreasing to 0.74 microM (0.04 mg L(-1)). Dissolved arsenic concentrations initially covaried with iron but subsequently increased again as sulfide accumulated, consistent with the formation of soluble thioarsenite complexes. Dissolved arsenic concentrations subsequently decreased again from a maximum of 2 microM (148 microg L(-1)) to 0.3 microM (22 microg L(-1)), consistent with formation of sulfide mineral phases or increased arsenic sorption at higher pH values. Disequilibrium processes may also explain this second arsenic peak. The maximum iron and arsenic concentrations observed in the lab represent conditions most equivalent to the in situ conditions. These findings indicate that enhanced sulfate reduction merits further study as a potential in situ groundwater arsenic remediation strategy at landfills and other sites with elevated arsenic in reducing groundwater.     

Spatial and temporal variability of arsenic solid-state speciation in historically lead arsenate contaminated soils

The arsenic (As) solid-state speciation (i.e., oxidation state, precipitates, and adsorption complexes) is one of the most important factors controlling dissolved As concentrations at As contaminated sites. In this case study, two representative subsurface samples (i.e., oxidized and semi-reduced sites) from former lead arsenate contaminated soils in the northeastern United States were chosen to investigate the effects of aging on As retention mechanisms using multiscale spectroscopic techniques. X-ray powder diffraction (XRD), synchrotron based microfocused (micro) XRD, in situ micro-synchrotron based X-ray fluorescence spectroscopy (SXRF), and micro-X-ray absorption near edge structure (XANES) spectroscopy were used to compliment the final bulk X-ray absorption spectroscopy (XAS) analyses. In the sample from an oxic area, As is predominantly (approximately 71%) present as As(V) adsorbed onto amorphous iron oxyhydroxides with a residue (approximately 29%) of an original contaminant, schultenite (PbHAsO4). Contrarily, there is no trace of schultenite in the sample from a semi-reduced area. Approximately 25% of the total As is present as adsorbed phases on amorphous iron oxyhydroxide and amorphous orpiment (As2S3). The rest of the fractions (approximately 46%) were identified as As(V)-Ca coprecipitates. This study shows that aging effects can significantly alter the original chemical constituent (schultenite) in soils, resulting in multi and site-specific As solid-state speciation. The variability in spatial and temporal scale may be important in assessing the environmental risk and in developing in situ remediation technologies.     

Arsenic occurrence, mobility, and retardation in sandstone and dolomite formations of the Fox River Valley, Eastern Wisconsin

Elevated levels of groundwater arsenic (approximately 100 microg L(-1) = 1.3 x 10(-6) M) are found in the Fox River Valley, eastern Wisconsin. The goals of this study were to identifythe sources of As contamination and to determine the reactions responsible for As mobilization and retardation in areas lacking a discrete zone of As-enriched sulfides, shown previouslyto cause elevated arsenic in groundwater. Detailed mineralogical and chemical analyses were conducted on samples from the Sinnipee Group dolomite and St. Peter sandstone in eastern Wisconsin. Solution chemistry was monitored in batch reactions of dolomite, quartz, and sulfide mineral fractions with a 0.01 M CsCl solution at pH 7 for 3 weeks in air. Results indicate that arsenic is present in isomorphous substitution with pyrite/marcasite (FeS2), which occurs as disseminated veins, grains, and nodules in the dolomite and sandstone. The released As subsequently sorbs on the ferric oxyhydroxides formed or coprecipitates in a scorodite-like phase. Significantly, oxidative dissolution of the disseminated As-rich FeS2 grains and nodules is sufficient to explain the elevated As levels observed in eastern Wisconsin groundwater. Although complete uptake of As is observed in the batch experiments, persistent elevated As levels with spatial and temporal variations in regional groundwaters are attributed to differences in the type of sulfide occurrence (discrete horizon vs dispersed grains, veins, and nodules), variations in the dissolved oxygen content of the groundwater, and variable (limited) buildup of reacted surface layers on sulfide grains in the natural flow-through system. Discrete nanoparticulate As phases, As surface precipitates on sulfides, and sorbed As on dolomite and quartz are eliminated as major sources, and sorption of arsenic on dolomite and quartz is deemed less important than association with ferric oxyhydroxides for retardation in the regional system.