Resin luting materials: Tissue response in dog's teeth

The aim of this study was to evaluate radiographically and histologically the pulpal and periapical response to self‐adhesive (Rely X? Unicem) and self‐etching and self‐curing (Multilink^®) resin‐based luting materials in deep cavities in dogs' teeth. Deep class V cavities (0.5‐mm–thick dentin) were prepared in 60 canine premolars and the following materials were applied on cavity floor: Groups I/V—RelyX? Unicem; Groups II/VI—Multilink^®; Groups III/VII—zinc phosphate cement (control) and; Groups IV/VIII—gutta‐percha (control). Cavities were restored with silver amalgam. Animals were euthanized after 10 days (groups I–IV) and 90 days (groups V–VIII). Tooth/bone blocks were radiographed and processed for histopathological evaluation of pulp and periapical tissue response to the materials. All materials presented similar histopathological features and radiographic findings at both periods. The pulp tissue was intact. The apical and periapical regions and periodontal ligament thickness were normal. No inflammatory cells, resorption of mineralized tissue (dentin, cementum, and alveolar bone) or bacteria were observed. The lamina dura was intact and no areas of periapical bone rarefaction or internal/external root resorption were observed radiographically. It can be concluded that Rely X? Unicem and Multilink^® caused no adverse tissue reactions and may be indicated for cementation of indirect restorations in deep dentin cavities without pulp exposure. Microsc. Res. Tech. 78:1098–1103, 2015. © 2015 Wiley Periodicals, Inc.     

Quantitative and reliable in vitro method combining scanning electron microscopy and image analysis for the screening of osteotropic modulators

The increased generation and up-regulated activity of bone resorbing cells (osteoclasts) play a part in the impairment of bone remodeling in many bone diseases. Numerous drugs (bisphosphonates, calcitonin, selective estrogen receptor modulators) have been proposed to inhibit this increased osteoclastic activity. In this report, we describe a pit resorption assay quantified by scanning electron microscopy coupled with image analysis. Total rabbit bone cells with large numbers of osteoclasts were cultured on dentin slices. The whole surface of the dentin slice was scanned and both the number of resorption pits and the total resorbed surface area were measured. Resorption pits appeared at 48 h and increased gradually up to 96 h. Despite the observation of a strong correlation between the total resorption area and the number of pits, we suggest that area measurement is the most relevant marker for osteoclastic activity. Osteotropic factors stimulating or inhibiting osteoclastic activity were used to test the variations in resorption activity as measured with our method. This reproducible and sensitive quantitative method is a valuable tool for screening for osteoclastic inhibitors and, more generally, for investigating bone modulators.     

Influence of Trigonella foenum graecum seed extract as root canal irrigation agent on root surfaces: A scanning electron microscope/energy dispersive X‐ray analysis study

The purpose of this in vitro study was to investigate the effect of Trigonella foenum graecum seed extract (TFGSE) as a root canal irrigation agent on the surface of instrumented root canals and on changes in the mineral contents of the root dentin. A total of 90 extracted human mature maxillary central incisor teeth with a single root and without root resorption were selected. The specimens were subdivided into five groups according to irrigation protocol groups G0: distilled water (n = 15): G1: Sodium hypochlorite (5.25% NaOCl); G2: 1% TFGSE G3: NaOCl +17% EDTA (3 min); G4: NaOCl+1% TFGSE; G5: 1% TFGSE +17% EDTA. All the roots were sectioned longitudinally into two halves and examined under scanning electron microscope/energy dispersive X‐ray analysis (SEM/EDX) to assess changes in the mineral content of the tooth. Smear layer removal from root canals was evaluated with scanning electron microscopy (SEM). A statistical analysis was performed using the Kruskal–Wallis test. The most effective irrigation protocols in removing smear layer occurred with TFGSE and NaOCl, both with rinsing with 17% EDTA. TFGSE was more effective than NaOCl for removing the smear layer. The results showed the ability of 1% TFGSE to remove the smear layer from the root canals. TFGSE is a promising alternative irrigation agent for root canals.     

Imaging of extraradicular biofilm using combined scanning electron microscopy and stereomicroscopy

Microorganisms are able to survive and induce persistent infection in extraradicular areas. The objective of this study was to evaluate the relationship between extraradicular biofilm and persistent periapical periodontitis. Thirty‐five apical samples with different stages of pulp and periapical pathology (vital pulp, pulp necrosis without radiographically visible periapical lesions, chronic periapical periodontitis that had not received root canal therapy and persistent periapical periodontitis) were initially evaluated using scanning electron microscopy. The same samples were then processed using Brown and Brenn‐modified Gram staining. We detected extraradicular biofilm in all samples with persistent periapical periodontitis and in three samples with chronic periapical periodontitis. The extraradicular bacteria predominantly had rod and filament morphology and were surrounded by varying amounts of amorphous extracellular material. The surfaces outside the root of the apical samples with vital pulp and pulp necrosis were covered by fibers, and no extraradicular microorganisms were present, which suggests that extraradicular biofilm is closely associated with failed endodontic treatments, thus resulting in persistent infection. Microsc. Res. Tech. 76:979–983, 2013. © 2013 Wiley Periodicals, Inc.     

The relation between structural,rugometric and fractal characteristics of hard dental tissues at micro and nano levels

Human tooth exhibits a structure of a mixture of inorganic hydroxyapatite nanocrystals and organic phases. The aim of this study is to investigate different tissues of human canine teeth surface along with the micro structure parameters of each tissue. X‐ray diffraction (XRD) is used to study the amorphous or crystalline nature of each tissue with different mineral compositions and crystalline structures where the highest crystalline quality is related to enamel. The surfaces are also examined by energy‐dispersive X‐ray spectrometry. Moreover, crystalline quality factor is carried out to estimate the crystallinity of the tissues. Also, based on the basic Scherrer equation, the Williamson–Hall equation is applied to extend the formula for the XRD. Enamel and cementum tissues of a typical human tooth, which look similar, are composed of a large variety of wide lines with different widths through Raman spectra analysis. In addition, the applied scanning electron microscopy extracts similar morphology for all tissues with round granular structures which are denser in the cementum. Atomic force microscopy is finally used for investigation of micro‐morphologies of the different tissues and the results are compared with the fractal analysis which ends to the bifractal and anisotropic nature of enamel and cementum along with monofractal and isotropic nature of dentin.     

Resin-tooth interfacial morphology and sealing ability of one-step self-etch adhesives: microleakage and SEM study

OBJECTIVES: To compare microleakage of three self‐etch adhesives and to analyze enamel surface morphology and interfacial morphology of resin–enamel and resin–dentin interface under scanning electron microscope (SEM). EXPERIMENTAL DESIGN: Study was conducted in 65 extracted human premolars. Class V cavities were prepared in 45 teeth and assigned to three groups (n = 15) according to three self‐etch adhesives (OptiBond All‐in‐One, iBond, and Adper Prompt L‐Pop). After restoration, 10 samples from each group were used to assess microleakage at enamel and dentin margin. Five samples from each group were used for analysis of interfacial morphology at resin–enamel and resin–dentin interface under SEM. Remaining 20 teeth were used to prepare flat enamel buccal surfaces to analyze the difference in surface morphology after treatment with three adhesives (n = 5 each) and 36% phosphoric acid treatment (n = 5). PRINCIPAL OBSERVATIONS: At enamel margin, Prompt L‐Pop depicted least leakage of all the three adhesives and also showed best interfacial adaptation under SEM. At dentin margin, OptiBond All‐in‐One showed significant less leakage than iBond and Prompt L‐Pop. On flat enamel surface, phosphoric acid produced the most retentive etching pattern when compared with the three adhesives. CONCLUSION: Prompt L‐Pop showed the best bonding effectiveness in enamel, whereas OptiBond All‐in‐One performed significantly better in dentin. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

基于红外锁相法的热波检测技术及缺陷深度测量-1

红外锁相法热波检测技术（Lock-in Thermography）是一种基于热波处理的主动式红外热成像检测技术,适用于复合材料及复杂结构构件的无损检测,已广泛应用于航天航空、汽车、机械、电力等领域。本文着重介绍了阐述了红外锁相法热波检测技术的原理、缺陷深度测量及在蜂窝夹层结构及焊接构件检测中的应用。采用有限差分法计算了强度按正弦规律变化热流引起试件表面温度变化历程,并采用锁相法提取了有缺陷与无缺陷处的稳态温度变化和计算二者相位差,与试验结果接近。建立了热波在试件中传导的热—电等效模型,利用该模型对红外锁相法热波检测技术进行了仿真研究,得到了缺陷深度和反射热波与入射热波相位差之间的关系,该模型计算结果与试验结果基本一致。采用红外锁相法热波检测技术对模拟缺陷的蜂窝夹层结构试件和实际的焊接构件进行了无损检测试验研究,结果表明,采用红外锁相法热波检测技术能够快速、准确的获得缺陷大小、位置等,该技术对具有复杂曲面结构的构件也十分优越。     

MICRO-COURSE OF CAVITATION EROSION

By cavitation tests and scanning electron microscope （SEM） microanalysis, the micro-appearance of cavitation samples is studied. It is the first time that the micro-appearance of metals is pursued successfully. According to the changing course of the micro-appearance of metals, the damaging course of cavitation erosion is determined. The destructive way of collapsing bubbles on the metal surface is known. Firstly cavitation pinholes appear on the metal surface, then cracks generate and grow under the action of collapsing bubbles. When cracks connect each other, small pieces are removed from pinhole wall and pinholes develop into cavitation pits. When the previous surface is removed completely, new pinholes are produced again on the new surface. A pinhole is the result of the powerful striking of a micro-liquid jet ejected by a large collapsed bubble near the surface. At some stages, cracks grow in the way of fatigue. The corrosion phenomenon is observed during the cavitation erosion. The cavitation pattern can be used to explain the cavitation pregnancy and the changing regulation of sample surface.     

Potential effects of tooth-brushing on human dentin wear following exposure to acidic soft drinks

This study used scanning electron microscopy and atomic force microscopy to examine the short-term potential effects of brushing time and the start-time of tooth-brushing after demineralization on primary dentin wear in vitro. Thirty-six noncarious primary central incisors were assigned to 12 experimental groups. Exposure to cola drinks was used to initiate the demineralization process. Three brushing times (5, 15 and 30 s) and four start-times of brushing (0, 30, 60 and 120 min) after an erosive attack were used for the abrasion process. Tooth-brushing the softened dentin surface led to increases in the open tubular fraction and microstructural changes on the dentin surface. Brushing immediately after exposure to cola resulted in the greatest irreversible dentin loss, whereas brushing 60 or 120 min after pretreatment resulted in the least irreversible dentin loss. However, brushing time had no effect on the irreversible loss of dentin wear. Based on these experimental results, tooth-brushing should be performed at least 60 min after consuming a cola drink to achieve the desired tooth cleaning and avoid the introduction of surface lesions on dentin.     

Periodontal research contributions to basic sciences: From cell communication and host-parasite interactions to inflammation and bone biology

The periodontium comprises all structures surrounding the teeth, including gingiva, root cementum, periodontal ligament and alveolar bone. Those tissues aim to protect and support the teeth and are challenged by a residing microbiota that leads to subclinical inflammation even in physiological conditions. Periodontitis, a prevalent multicausal inflammatory and destructive disease, develops as a result from complex host-parasite interactions. This unique physiologic and pathologic scenario enables the development of research methods which allows conclusions beyond the simple understanding of periodontal homeostasis. The aim of this viewpoint was to explore potential contributions of periodontal research to a wide array of basic science specialties, such as cell and molecular biology, microbiology, immunology, endocrinology, rheumatology, among others.     

Surface structure imaging by electron microscopy

Reconstructed structures at monolayer level on ‘clean and well-defined’ surfaces can be imaged by transmission electron microscopy in fixed beam illumination mode. The specimens are cleaned in-situ in the electron microscope in ultra high vacuum. Transmission electron diffraction pattern intensities can give useful information for determining the surface unit cell size of the structure, and the atom positions (geometric arrangement of atoms in the unit cell) especially those with a large unit cell, since the diffraction intensities are interpreted kinematically. High resolution surface imaging which gives directly the atom positions is tested here for a single monolayer terrace on Ag (111) surface. The result shows the value of HREM for studies of surface crystallography.     

Analysis of adhesive interface in root canals irradiated by Er,Cr:YSGG laser after luting a fiber post

This study evaluated the effect of Er,Cr:YSGG laser on the root canal dentin after luting a fiber post. Twenty‐four bovine teeth roots were prepared using NiTi instruments and filled with Sealer 26 and gutta‐percha. Post spaces were prepared and roots were distributed according to dentin treatment (n = 8): 2.5%NaOCl (group control), Er,Cr:YSGG laser (1.5 W, 20 Hz, 20 s) (group test 1) or 2.5%NaOCl + Er,Cr:YSGG laser (group test 2). Fiber posts were luted using adhesive cement (Rely X U200, 3M) and roots were prepared to confocal laser scanning microscopy (CLSM) and scanning electron microscope (SEM). The morphology of interface, thickness of cement, and the gaps and tags were analyzed. Non‐parametrical data for thickness of cement were submitted to Friedman and Kruskall–Wallis tests (α = 0.05) and parametrical data for gaps to ANOVA (α = 0.05). CLSM of the cement thickness and gaps revealed no significant difference in surface treatment (NaOCl, Er,Cr:YSGG laser and NaOCl + Er,Cr:YSGG laser) (p > .05) and canal thirds (cervical, middle, and apical) (p > 0.05). SEM showed tags and a residual layer of cement adhered to dentin, mainly in laser‐irradiated specimens. The pretreatment of root canal with Er,Cr:YSGG laser previously to luting the fiber post with a self‐adhesive cement did not influence the cement thickness and gaps but affected the dentin interaction.     

钢轨缺陷无损检测与评估技术综述

钢轨缺陷的检测对于保障铁路安全具有重要的意义。在研究钢轨无损检测与评估技术的背景下,对国内外采用的钢轨缺陷检测方法进行了全面的综述,包括物理检测方法和机器视觉检测方法。阐述并分析了钢轨缺陷评估方法在机器视觉方面的应用情况,同时对所采用的钢轨无损检测与评估技术进行对比,论述和总结了包括射线检测在内的物理检测及包括图像处理在内的机器视觉检测两类检测方法的差异性。分析和研讨了现代无损检测与评估技术及其在发展中涉及的相关技术问题,并对钢轨缺陷无损检测与评估技术的未来发展给出设想。     

The effect varied scanning electron microscopy desiccation techniques has on demineralized dentin

The study objective was to assess (a) the effect of a rubbing‐application of ethylenediaminetetraacetic acid (EDTA) or citric acid (CA) has on the ultrastructure of surface dentin and (b) the effect of two scanning electron microscopy (SEM) desiccation preparation techniques have on the collagen surface produced. Treatment regions on proximal root surfaces of extracted human teeth were root planned to expose dentin. Cotton pellets soaked in either 30% CA or 24% EDTA solution were rubbed on the treatment region then processed for SEM using one of two desiccation techniques, that is, (a) critically point dried from liquid CO₂ (control) or (b) air‐dried from tetramethylsilane (experimental). Specimens were coated with gold/palladium and viewed/photographed with an SEM. Specimens of the control groups displayed tufted fibrils (CA > EDTA) with many dentin tubules being partially obscured by overhanging fibrils. Air‐dried specimens of both treatment groups displayed a flat intact monolayer devoid of a matted meshwork of fibrous collagen. Discrete fibril “sprigs,” emanating from the surface monolayer, were characteristic of the EDTA group only. The rubbing‐application of EDTA on dentin produces a tufted fibril surface somewhat similar to that produced by CA. Air‐drying desiccation of both resulted in marked distortion with fibril collapse/coalescence of the tufted collagen matrix.     

Mechanical and micromorphological evaluation of chlorhexidine-mediated dentin remineralization

Chlorhexidine (CHX) has been reported to reduce self-degradation of collagen fibrils by inhibiting host-derived protease activity in demineralized dentin. Theoretically, if the collagen fibril scaffold of demineralized dentin maintains its original crosslinkage pattern on treatment with CHX and appropriate supplementation with necessary mineral sources, dentin remineralization may occur in demineralized lesions. In this study, we provide direct mechanical and micromorphological evidence for the ability of CHX to promote remineralization of demineralized dentin. Specifically, with respect to demineralized dentin blocks treated with different concentrations of CHX (0.02-2%) and stored in simulated body fluid, we have observed a significant increase in the elastic modulus of dentin treated with relatively high concentrations of CHX (0.2 and 2%) as storage time increased, whereas the elastic modulus of the non-CHX treated control group decreased. We have also observed a dense mineral deposition along collagen fibrils in the dentin group treated with 0.2 and 2% CHX via field emission scanning electron microscopy.     

Thermal effects and morphological aspects of human dentin surface irradiated with different frequencies of Er:YAG laser

This study reports the effects on micromorphology and temperature rise in human dentin using different frequencies of Er:YAG laser. Sixty human dentin fragments were randomly assigned into two groups (n = 30): carious or sound dentin. Both groups were divided into three subgroups (n = 10), according to the Er:YAG laser frequency used: 4, 6, or 10 Hz (energy: 200 mJ; irradiation distance: 12 mm; and irradiation time: 20 s). A thermocouple adapted to the tooth fragment recorded the initial temperature value (°C); then, the temperature was measured after the end of the irradiation (20 s). Morphological analysis was performed using images obtained with scanning electron microscope. There was no difference between the temperatures obtained with 4 and 6 Hz; the highest temperatures were achieved with 10 Hz. No difference was observed between carious and sound dentin. Morphological analyses revealed that all frequencies promoted irregular surface in sound dentin, being observed more selectively ablation especially in intertubular dentin with tubule protrusion. The caries dentin presented flat surface for all frequencies used. Both substrates revealed absence of any signs of thermal damage. It may be concluded that the parameters used in this study are capable to remove caries lesion, having acceptable limits of temperature rise and no significant morphological alterations on dentin surface. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Influence of acceleration setting reaction by halogen light‐curing on GIC–dentin interface: Qualitative analysis by SEM

The aim of this study was to evaluate by scanning electron microscope (SEM) photomicrographs the influence of application of halogen light‐curing for fastening the set reaction of high‐viscosity glass ionomer cements (GIC) by assessing the material/dentin interface. Twelve human primary canines were assigned in four groups (n = 3) according to the GIC (Fuji IX, GC or Maxxion R, FGM) and application of halogen light‐curing (60 sec or control—no external energy). Blocks with approximately 6 mm of height were buildup on previously pre‐treated dentin surface in according to the experimental group. After storage at 37 °C, 100% humidity for 48 h, the specimens were then sectioned in slices with 1‐mm thick. The slices were qualitative analyzed using SEM to evaluate possible structural changes. Two examiners independently evaluated the images in order to observe the spherical hollow spaces of each tooth. The photomicrographs revealed the presence of spherical hollow spaces in all experimental groups. However, in both groups that received halogen light‐curing application, it was possible to observe that the presence of these hollow spaces decreased in size and quantity. It can be concluded that the halogen light‐curing application positively decreases in size and quantity in the presence of spherical hollow spaces in GIC.     

Effect of laser preparation on adhesion of a self‐adhesive flowable composite resin to primary teeth

The aim of the study was to evaluate the adhesion of a self‐adhering flowable composite resin to primary tooth enamel and dentin after silicon carbide paper (SiC) and laser pretreatment. Adhesive properties were evaluated as shear bond strength (SBS) and scanning electron microscopic (SEM) characteristics. A total 120 primary canine teeth were randomly divided into two groups to study enamel and dentin. Each group was divided into 6 subgroups (n = 10) according to type of surface preparation (SiC or Er:YAG laser) of enamel or dentin. Three methods were used to build cylinders of restoration on tooth surface: OptiBond All‐In‐One + Premise Flowable composite, OptiBond All‐In‐One + Vertise Flow and Vertise flow. After restoration, samples were tested for SBS and failure mode. Twenty eight samples were examined by SEM. The results of the study showed SBS of Vertise Flow was lower than others in enamel and dentin samples pretreated with SiC and in dentin samples pretreated with laser (P < 0.001). Compared to SiC pretreatment, laser pretreatment led to a significantly higher SBS with Vertise Flow on enamel (P < 0.001). Vertise Flow associated with the adhesive led to a higher SBS in enamel and dentin compared to Vertise Flow alone. Adhesive and mixed failure modes were observed more frequently in Vertise Flow groups. SEM images showed that Vertise Flow led to more irregularities on enamel and more open dentinal tubules after laser ablation compared SiC pretreatment. Microsc. Res. Tech. 79:334–341, 2016. © 2016 Wiley Periodicals, Inc.     

基于BP神经网络的冷轧带钢表面质量检测研究

针对传统的方法在冷轧带钢表面缺陷图像模式识别中存在的问题,在小波变换提取特征的基础上,提出了基于BP神经网络的非线性模式识别方法.结合国内实例,对5种典型冷轧带钢表面缺陷图像进行了实验研究,实验结果表明,该方法能够对冷轧带钢表面缺陷图像进行有效识别,具有更好的适应性.