共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
用荧光光谱及紫外可见光谱法研究了2-对氯苯氨基噻吩并[2,3-d]嘧啶-4(3H)-酮与牛血清白蛋白(BSA)之间在不同温度下的相互作用.实验表明,2-对氯苯氨基噻吩并[2,3-d]嘧啶-4(3H)-酮能强烈猝灭BSA的内源荧光,猝灭机理为动态猝灭.在此基础上计算了二者相互作用的结合常数、结合位点数及热力学参数等,结果表明,2-对氯苯氨基噻吩并[2,3-d]嘧啶-4(3H)-酮分子与BSA分子以摩尔比1∶1结合,其结合反应主要是熵驱动,主要作用力是疏水力.同时,应用同步荧光考察了FDT对BSA构象的影响. 相似文献
3.
4.
荧光光谱法研究了注射用核黄素(Riboflavin,Rf)与牛血清白蛋白(BSA)的相互作用.核黄素对BSA具有荧光猝灭作用,其猝灭方式为静态猝灭;在301和317K下用Stem-Volmer方程和热力学方程等处理实验数据,求出了结合常数KA、结合位点数n及热力学参数ΔG、ΔH和ΔS.核黄素与BSA之间的作用力主要为氢... 相似文献
5.
采用荧光光谱法研究了盐酸二甲双胍与牛血清白蛋白(BSA)的相互作用以及常见金属离子对盐酸二甲双胍和BSA相互作用的影响。在λex=282nm、λem=340nm的条件下,测定了不同温度下盐酸二甲双胍对BSA的荧光猝灭光谱以及铜离子、镁离子存在下的荧光猝灭光谱。根据Stern-Volmer方程求得563K、567K、571K时盐酸二甲双胍与BSA相互作用的动态猝灭常数KSV分别为7.212L·mol-1、7.926L·mol-1、9.227L·mol-1,动态猝灭速率常数Kq分别为7.212×108 L·mol-1·s-1、7.926×108 L·mol-1·s-1、9.227×108 L·mol-1·s-1,相互作用的热力学参数ΔG、ΔH、ΔS的平均值分别为-5.32kJ·mol-1、23.95kJ·mol-1、95.64J·mol-1·K-1,结合常数Ka分别为3.75L·mol-1、4.90L·mol-1、12.63L·mol-1,结合位点数n的平均值为0.9206,在金属离子存在下,KSV和Ka均降低。表明,盐酸二甲双胍对BSA的荧光猝灭为动态猝灭且二者之间的相互作用力为疏水作用力,金属离子的存在不利于盐酸二甲双胍与BSA的结合,削弱了盐酸二甲双胍与BSA的相互作用。 相似文献
6.
《化学试剂》2021,43(11):1569-1574
在模拟生理条件下,采用荧光光谱法和分子对接法研究了1-(4-甲氧基苯基)-3-(2-噻吩基)-2-丙烯酮(MOTPO)与BSA的结合机理,结果表明BSA与MOTPO之间为静态荧光淬灭过程,得到了BSA与MOTPO之间相互作用的结合常数和热力学数据,结合常数(K_a)的数量级为10~4,疏水及静电相互作用在BSA与MOTPO之间的相互作用中起着重要作用。根据共振能量转移的F9rster理论计算得MOTPO和BSA之间的结合距离(r)7 nm。进一步研究了在280 nm和295 nm激发波长下的荧光淬灭过程:MOTPO的主要结合位点位于BSA的亚结构域ⅡA(位点Ⅰ)中;MOTPO与BSA的结合可以诱导BSA中的构象变化。进一步讨论了常见金属离子对BSA-MOTPO复合物结合常数的影响,表明金属离子的存在可能会影响MOTPO的作用结果。MOTPO可以与BSA的亚结构域ⅡA结合,疏水和极性起了关键作用。 相似文献
7.
8.
9.
应用水溶性4,9一二[N-(2一二甲氨基)乙基]-9-吖啶胺-4-甲酞胺(DNAF)探针,研究了DNAF与牛血清白蛋白(BSA)的相互结合作用机理.计算出相应的热力学参数△H,△G以及△S;通过荧光猝灭方法研究结合作用,测定出结合位点数n和表观结合常数KA;根据荧光共振能童转移理论求得供体BSA和受体DNAF的距离r;... 相似文献
10.
用荧光光谱法和紫外吸收光谱法研究了1-甲基-2,6-二苯基-哌啶酮-4(MPP)与牛血清白蛋白(BSA)的相互作用,并计算了结合位点数(n)、结合常数(KA)和热力学参数如ΔHθ、ΔGθ、ΔSθ等.结果表明,荧光猝灭机理为动态猝灭,MPP与BSA以1:1结合,主要作用力是疏水力.根据Frster非辐射能量转移原理计算了MPP与BSA的结合距离. 相似文献
11.
Solid solutions of diphosphates of zinc and copper and of zinc and cobalt were synthesized from mixtures of pure diphosphates at temperatures up to 1000°C. Their X-ray diffractometry patterns varied continuously from one end member to the other. Solid solutions of orthophosphates of composition Zn3−x Cox(PO4 )2, with x = 0.4–1.6, were formed at temperatures up to 950°C; all exhibited the structure of γ-Zn3 (PO4 )2. Solid solutions of orthophosphates of composition Zn3−x Cux (PO4 )2 exhibited more-complex behavior. At 1000°C and copper contents of 20–80 mol%, a phase that is related to Cu3 (PO4 )2, termed here the "ε-phase," predominated. At 850°–950°C and in the region from 20 mol% to ∼33 mol% of copper, the solid solutions (the "η-phase") adopted the structure of graftonite. At 800°–900°C and 10–15 mol% of copper, the solid solutions exhibited a new structure (the "δ-phase"), which we found to be related to the mineral sarcopside. At temperatures 950°C, the solutions that contained 5–15 mol% of copper (the "β-phase") had the structure of β-Zn3 (PO4 )2, whereas at 800°–850°C, solutions with 5 mol% of copper (the "-phase") exhibited the structure of γ-Zn3 (PO4 )2. Attempts to synthesize Cu+ ZnPO4 and Cu+ Cu2+ Zn3 (PO4 )3 were unsuccessful. 相似文献
13.
14.
为了提高油田的生产效率,设计最佳的油气集输处理的工艺流程,更好地完成油气水分离处理的任务。对油气集输工艺技术进行优化,发挥高效油气水分离处理设备的优势,提高油气水处理的质量,保证油气集输工艺顺利实施,获得最佳的油田产量外输。 相似文献
15.
建设创新型国家是我们中华民族的历史责任。“自主创新、重点突破、支撑发展、引领未来”的16字方针应当成为我们未来创新活动的指南。建设创新型国家把自主创新放在首位,并提出了引领未来的高标准要求。钢铁科技创新必须突出重点,抓住创新成果产业化这个关键,支撑起行业和国民经济的发展。 相似文献
16.
相比已经完善丰富的开采和勘探技术,油气的运输以及储存却仍然存在不足之处。我国对能源安全提出更加严格要求的同时,对区域经济的发展规划也有足够重视。因此,保障油气管道的安全则成为了我国能源安全战略的重中之重。在阐释油气管道现阶段在储运安全保障技术发展状况的基础上,分析了现存的问题及解决问题的手段,并指出未来可能使用的目标策略,为今后研究者提供一定程度上的借鉴经验。 相似文献
17.
18.
膜的污染和劣化及其防治对策 总被引:25,自引:0,他引:25
较为系统地介绍了膜污染和劣化的定义和特点,因膜污染和劣化而造成的膜性能变化,以及如何预防、减少或清除膜污染和劣化的一些通用方法。 相似文献
19.
20.
James L. White David G. Salladay David O. Quisenberry Donald L. MacLean 《应用聚合物科学杂志》1972,16(11):2811-2827
Gel permeation chromatographic (GPC) and thin-layer chromatographic (TLC) studies of polystyrene, polybutadienes (BR), and their copolymers (SBR) have been carried out. GPC primarily separates them on the basis of molecular size, and TLC, on the basis of composition. Methods of obtaining absolute molecular weight distributions for BR and SBR based upon variations of the Strasbourg Universal Calibration procedure are described. In particular, [η]–M relationships in both the GPC solvent (THF) and in a second solvent (toluene) were used; in addition, results of statistical mechanical calculations for \documentclass{article}\pagestyle{empty}\begin{document}$\overline {s^2 }$\end{document} (based on the assumption of negligible steric hindrance and freely rotating bonds) were applied. An experimental comparison of these methods was carried out, and use of the [η]–M relationships for both solvents was found to give satisfactory results. The predictions of the statistical theory were too low. A detailed study of polymer–solvent–gel interaction in the GPC unit was made through investigation of ternary phase equilibrium in the (polystyrene)–THF–(polymer) system. The polymers studied included BR and SBR with varying styrene contents. Experimental techniques for TLC separations of BR, SBR, and polystyrene according to the composition are described. 相似文献