A novel polarizer‐free dye‐doped polymer‐dispersed liquid crystal for reflective TFT displays

Abstract— A novel preparation method for dichroic dye‐doped polymer‐dispersed liquid crystals has been developed. This was achieved by creating a porous polymer matrix first by washing out the liquid crystal from a polymer‐dispersed liquid crystal (PDLC), which is then refilled with dye‐doped liquid crystal. Optimizing the liquid crystal used in the refilling results in decreased turn‐on voltage and faster response time. Poster‐standard reflectivity and newspaper‐standard contrast was demonstrated with a 3.8‐in. QVGA reflective TFT display with a drive voltage of 10 V.     

Review of operating principle and performance of polarizer‐free reflective liquid‐crystal displays

Abstract— In this paper the operational principle and performance of guest‐host, liquid‐crystal/polymer‐composite scattering, and cholesteric liquid‐crystal reflective displays are reviewed. These displays do not use polarizers and have the advantage of providing high reflectance and compatibility with flexible plastic substrates.     

The color properties of a reflective CMYK module using polymer‐dispersed liquid crystal (PDLC)

A reflective CMYK (cyan, magenta, yellow, and black) module using polymer‐dispersed liquid crystal (PDLC) is investigated for multi‐color reflective display. Combined with the electro‐optical properties and visible spectral reflectivity of PDLC films, the color properties of the reflective CMYK module were evaluated in terms of the Uniform Color Space‐CIE 1976 L*a*b*. It is found that the blue light reflectivity of the PDLC films is lower than green light and red light reflectivity. With the increase of the voltage applied on PDLC, the color lightness of the CMYK module generally decreases, while the color saturation increases. When the voltage changed from 0 to 70 V with a 5‐V change amplitude, modules C, M, Y, and K severally exhibit at least five, six, three, and seven colors.     

Conformable displays based on polymer‐dispersed liquid‐crystal materials on flexible substrates

Abstract— We have developed a process that enables one to conform polymer‐dispersed liquid‐crystal (PDLC) displays into a particular shape indefinitely. Planar PDLC displays are first fabricated between indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates. This fully functional display can then be conformed to a particular shape by heating above the glass‐transition temperature of PET and then allowing it to cool down to room temperature. The display retains its shape and is fully functional after processing. We have created spiral‐and wave‐like samples and have demonstrated their operation after the conformal process. The stress is relieved in the substrate by conforming. Temperature effects on polymer substrates were investigated for two types of polymer films (PET/ITO substrates and a conducting polymer PEDOT:PSS/PET substrate) to analyze the effects of temperature on the resistance and mechanics of the films under an applied uniaxial strain. We have found a decrease in contrast of the PDLC after conforming, but surprisingly, a reduced threshold voltage and reduced hysterisis occurs.     

Mitigation of image blurring for performance enhancement in transparent displays based on polymer-dispersed liquid crystal

In this paper, we propose an effective real-time image enhancing technology for transparent displays based on polymer-dispersed liquid crystal (PDLC). The image enhancing technology consists of both global and local enhancement functions. It not only removes the affected haze but also sharpens the edge regions for transparent PDLC displays. This technology can improve the image quality such as contrast, brightness, color saturation, and gamma correction for transparent PDLC displays. The experimental results indicated that our proposed method can effectively enhance the visibility and remove the affected haze in the transparent PDLC display.     

A continuous‐viewing‐angle‐controllable liquid‐crystal display using a blue‐phase liquid crystal

Abstract— A continuous‐viewing‐angle‐controllable liquid‐crystal display (LCD) using a blue‐phase liquid crystal is proposed. To realize both wide‐viewing‐angle (WVA) mode and narrow‐viewing‐angle (NVA) mode with a single liquid‐crystal panel, each pixel is divided into a main pixel and a subpixel. The main pixel is for displaying images in both modes. The subpixel is for displaying images in WVA mode and controlling the viewing angle in NVA mode. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

A photographic technique for assessing the viewing‐angle performance of liquid‐crystal displays

Abstract— Liquid‐crystal displays (LCDs) have notable variation in luminance and perceived contrast as a function of the angle from which they are viewed. Though this is an important performance issue for LCDs, most evaluation techniques for assessing this variation have been limited to laboratory settings. This study demonstrates the use of a photographic technique for such an evaluation. The technique is based on an actively cooled charge‐coupled‐device (CCD) detector in combination with a macro lens covering a circular angular range (θ) of ±42.5°. The camera was used to evaluate the luminance and perceived contrast properties of an LCD. Uniform field images corresponding to 17 equally spaced gray‐scale values in the digital driving level (DDL) range of the display system were acquired. The 12‐bit gray‐scale digital images produced by the camera were converted to luminance units (cd/m²) via the measured luminance vs. DDL response function of the camera. The changes in perceived contrast as a function of viewing angle were derived from the Barten model of the gray‐scale response of the human‐visual system using the methods proposed by the AAPM TG18 Report. The results of this photographic technique were compared to measurements acquired from a similar display using a Fourier‐optics‐based luminance meter. The results of the two methods generally agreed to within 5%. The photographic methods used were found to be accurate and robust for in‐field assessment of the angular response of LCDs over the FOV of the camera.     

Viewing‐angle enhancement in holographic reflective displays by nanoscale holographic patterning

Abstract— This work presents a method to increase the viewing angle of holographic polymer‐dispersed liquid‐crystal (H‐PDLC) reflective displays. One of the drawbacks to H‐PDLC technology is the existence of a narrow viewing angle. We present a way to alleviate this problem by structuring the phase front of the recording beams to increase the viewing cone of the display. Analysis of the diffractive properties of these holograms shows that the macroscopic and the nanoscale morphologies both play a role in the optical properties of the films.     

Auto‐calibration of drive condition for cholesteric liquid crystal displays

Dynamic drive scheme (DDS) is known widely as passive matrix addressing that obtains both high‐speed re‐writing and a high contrast ratio in the field of cholesteric liquid crystal displays (LCDs). However, DDS has a serious problem in that the proper drive condition is very narrow and it is largely influenced by individual differences in LCDs that arise during their production. We have developed a new auto‐calibration system that adjusts both the contrast ratio and color balance automatically using capacitances of effective pixels and temperature compensation models that utilize the physical properties of cholesteric LCDs. We have managed to optimize the driving conditions between 5 and 35 °C with this method, and obtained both stable and high‐quality color images where the reflectance is 36%, contrast ratio is 8, and NTSC ratio is 20%. This auto‐calibration system has been able to greatly improve the production yield of cholesteric LCDs and made it possible to make practical use of cholesteric LCDs.     

Super‐reflective color LCD with PDLC technology

Abstract— A novel reflective color LCD without polarizers has been developed using a PDLC film and a retro‐reflector. Bright color images including moving images are achievable with ambient light. This novel LCD will enable the new application area of electronic paper.     

Liquid‐crystal displays using printed plastic TFT backplanes

Abstract— In this paper, we present results from a new liquid crystal over plastic printed thin‐film‐transistor (TFT) display. The display demonstrator shows that the processing incompatibilities between the plastic TFT backplane and the liquid‐crystal materials can be addressed to make a stable twisted‐nematic structure. New fabrication processes such as the photo‐alignment of liquid crystals have made it possible to create a new generation of displays, which pave the way towards fully integrated plastic liquid‐crystal‐display technologies.     

Optimal design of optical performance of reflective ferroelectric‐ and anti‐ferroelectric liquid‐crystal displays

Abstract— In an in‐plane optical geometry, such that the average optic axis lies on the plane parallel to both substrates, the optical properties of a reflective ferroelectric liquid‐crystal (FLC) or antiferroelectric liquid‐crystal (AFLC) cell were studied within the framework of the 2 × 2 Jones matrix formalism. To obtain good achromaticity and high brightness, the cell parameters such as the molecular rotation angle and the effective phase retardation of the AFLC layer were optimized. The device performances of the AFLC cell were experimentally demonstrated in this geometry.     

Controling color of liquid‐crystal displays

Abstract— Two newly derived characterization models for a liquid‐crystal (LC) display have been tested for five LC‐based displays. Data measured from a series of test colors indicated that all LC‐based displays showed similar characteristics, including an S‐shaped tone curve and poor channel chromaticity constancy. Because they include a hyperbolic function in their definition, the models do not have analytical inverses, and so iterative mathematical techniques are applied. It was shown that a new characterization model based on a hyperbolic function fits the tone curve very accurately with only four coefficients per channel for any type of LCD. In addition, it was also shown that the first derivative of the function provides a means of accurate correction of the chromaticity variation.     

环氧基聚合物分散液晶膜的制备及其性能研究

采用聚合相分离方法制备环氧树脂基PDLC膜.通过对液晶含量、固化温度和时间等条件进行优化,研究上述条件对PDLC膜性能的影响;使用UV-Vis、AFM、SEM等方法对聚合物的物理特性和PDLC膜的光电性质做了深入探讨.PDLC膜在传感器、光电开关、光栅以及新型分析仪器元器件等方面具有广阔的应用前景.     

Prospects of emerging polymer‐stabilized blue‐phase liquid‐crystal displays

Abstract— The prospects of emerging polymer‐stabilized blue‐phase liquid‐crystal displays, or more generally, Kerr‐effect‐induced isotropic‐to‐anisotropic transition, are analyzed with special emphases on the temperature effects. As the temperature increases, both the Kerr constant, induced birefringence, and response time decrease but at different rates. The proposed physical models fit well with experimental results. Some remaining technical challenges associated with this promising display technology are discussed.     

Fast‐response liquid‐crystal displays using crossed fringe fields

Abstract— A fast‐response and wide‐view liquid‐crystal display (LCD) using the crossed fringe‐field‐switching (CFFS) mode is proposed, where the fringe‐field electrodes exist on both the top and bottom substrates. The bottom fringe field is used to turn on the LC directors and the top fringe field is used to assist in the LC decay process. The decay time is reduced by ～2× compared to that of the conventional FFS mode between the full bright and dark states, and more than a 2× improvement is obtained for other gray‐scale transitions. This CFFS mode also preserves the wide‐view characteristics as the conventional FFS mode. Its applications to LCD TVs and monitors for reducing image blur are addressed.     

A submillisecond‐response liquid crystal for color sequential projection displays

We report a new LC with low viscosity and high clearing point (T_c ~102 °C) for color‐sequential projection displays. Using a 1.95‐µm mixed‐mode twisted nematic cell, the averaged gray‐to‐gray response time is less than 1 ms, which is ~3.6× faster than the current state of the art. Such a mixed‐mode twisted nematic liquid‐crystal‐on‐silicon can be used for near‐to‐eye wearable projection displays and head‐up displays in vehicles.     

A viewing‐angle‐controllable blue‐phase liquid‐crystal display

Abstract— A viewing‐angle‐controllable liquid‐crystal display (LCD) is proposed. When the device is only driven by an in‐plane electric field, it exhibits a wide‐viewing‐angle (WVA) mode. And it exhibits narrow‐viewing‐angle (NVA) mode when it is driven by a vertical electric field as well as an in‐plane electric field. In this manner, the viewing angle of the device can be controlled from 100° to 30°. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

Heterodyne method for determining the surface tilt angle of nematic liquid‐crystal displays

Abstract— The high‐sensitivity pretilt‐angle measurement of liquid‐crystal displays, based on the modified crystal‐rotation configuration and the use of a common‐path heterodyne interferometer, is proposed. In this technique, environmental disturbance and surface reflection are eliminated to a large extend, thus providing advantages for both constructing a simple‐optics measurement system and achieving fast measurement with high accuracy and sensitivity.     

Patterned liquid‐crystal laser film for multi‐dimensional multi‐color emissive film technology

Abstract— A two‐dimensional array consisting of dye‐doped reflection‐mode holographic‐polymer‐dispersed liquid crystal (H‐PDLC) lasers with alternating pitch lengths is presented. These post structures each reflect at a narrow bandwidth of light. The addition of laser dye to the H‐PDLC system allows for the generation of laser emission at the edge of the reflection band, or photonic band gap. In patterning these H‐PDLC post structures, a narrow‐linewidth patterned emissive color film is realized. The potential of such films and their implication in the display industry is discussed. In creating a three‐color array, an active emissive color film could replace the backlight and color filter components within the display. Such a patterned system would possess a wide color gamut, through spatial color synthesis, formed by narrow‐linewidth lasing structures with well‐defined wavelengths of emission.