Transflective twisted‐nematic liquid‐crystal display with double twisted‐nematic cell and twisted liquid‐crystal retarder

Abstract— Two configurations, (i) a double‐cell‐gap twisted nematic (DTN) liquid‐crystal display (LCD) and (ii) a single‐cell‐gap twisted‐nematic (TN) liquid‐crystal display (LCD) using a twisted LC retarder, were optimized for transflective liquid‐crystal displays. For the DTN configuration, both the single‐cell‐gap approach and the double‐cell‐gap approach were considered. The optimized configurations exhibit a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. They are easy to fabricate and also possess a perfect dark state. Both are suitable for high‐quality transflective TFT‐LCDs.     

Single‐cell‐gap transflective liquid‐crystal display and the use of photoalignment technology

Abstract— In this paper, transflective liquid‐crystal‐display (LCD) technology will be reviewed, and several new single‐cell‐gap transflective LCD configurations are proposed. Photoalignment technology is studied especially for transflective‐LCD applications. In order to realize the optimal performance of the display as well as a matched transmittance/reflectance voltage curve (TVC/RVC) for the transflective configurations, two different single‐cell‐gap transflective‐LCD approaches will be discussed. The first one is the dual‐mode single‐cell‐gap approach, in which different liquid‐crystal modes are applied to the transmissive and reflective subpixels of the transflective LCD. The other approach is the single‐mode s ingle‐cell‐gap approach, in which an in‐cell retardation film is applied to adjust the performance and TVC/RVC matching of a transflective LCD. Photoalignment technology is used to fabricate the dual‐mode liquid‐crystal cell in the first approach and also the in‐cell retardation film in the second approach. Prototypes of the proposed configurations have been fabricated, which show good performance and a matched TVC/RVC.     

Viewing‐angle compensation of TN‐ and ECB‐LCD modes by using a rod‐like liquid‐crystalline polymer film

Abstract— A liquid‐crystal line retardation‐film technology by using a rod‐like liquid‐crystalline polymer (LCP) for various LCD modes have been developed. In particular, considerable improvements in viewing‐angle performance have been achieved for the twisted‐nematic (TN) and the transmissive/transflective electrically controlled birefringence (ECB) modes by using hybrid aligned nematic film (NH Film).     

An overview of product issues in wide‐viewing TFT‐LCDs

Abstract— Several TFT‐LCD devices exhibiting high image quality have been developed and commercialized, overcoming the narrow viewing‐angle characteristics of conventional twisted‐nematic (TN) devices. Nevertheless, no single device dominates large‐sized TFT‐LCDs. In this paper, the product issues of existing LC devices related to manufacturing process and performance are discussed.     

Next‐generation mobile LCDs with in‐cell retarders

Abstract— In‐cell retarders can be a major breakthrough for mobile LCDs. When a patterned in‐cell retarder replaces the external retarders on transflective LCDs, brighter and thinner transflective LCDs with lower power consumption and wider viewing angle can be obtained. Additionally, when in‐cell retarders are applied in reflective LCDs, the thickness of the LCD is considerably reduced without affecting the optical performance of the reflective LCD. This paper presents the technology needed to make in‐cell retarders and the performance of reflective and transflective LCDs with in‐cell retarders.     

Switchable transmissive and reflective liquid‐crystal display using a multi‐domain vertical alignment

Abstract— A wide‐view transflective liquid‐crystal display (LCD) capable of switching between transmissive and reflective modes in response to different ambient‐light conditions is proposed. This transflective LCD adopts a single‐cell‐gap multi‐domain vertical‐alignment (MVA) cell that exhibits high contrast ratio, wide‐viewing angle, and good light transmittance (T) and reflectance (R). Under proper cell optimization, a good match between the VT and VR curves can also be obtained for single‐gamma‐curve driving.     

High‐transmittance in‐plane‐switching liquid‐crystal displays using a positive‐dielectric‐anisotropy liquid crystal

Abstract— The in‐plane‐switching (IPS) mode exhibits an inherently wide viewing angle and has been widely used for liquid‐crystal‐display (LCD) TVs. However, its transmittance is limited to ～76% compared to that of a twisted‐nematic (TN) cell if a positive‐dielectric‐anisotropy LC is employed. A special electrode configuration that fuses the switching mechanism of the conventional IPS and the fringe‐field switching (FFS) to boost the transmittance to ～90% using a positive LC has been developed. The new mode exhibits an equally wide viewing angle as the IPS and FFS modes.     

Optical design and roll‐to‐roll fabrication process of microstructure film for wide viewing LCDs

We have developed a new microstructure film for wide viewing liquid crystal displays (LCDs). By attaching it to the surface of a conventional LCD, the viewing angle characteristics of LCD has drastically improved without causing a blur of the frontal image and a decrease in the contrast ratio under bright ambient light conditions. This film can be applied to various LC modes including twisted nematic and multidomain vertical alignment by changing its internal micrometer‐size 3D structure. Further, this film can be mass‐produced efficiently by self alignment roll‐to‐roll process.     

Comb‐on‐plane switching electrodes for liquid‐crystal displays

Abstract— Although the common twisted‐nematic liquid‐crystal displays (TN‐LCD) has excellent contrast and low color dispersion, it suffers from small viewing angle when driven into the homeotropic state. Among the many techniques proposed, in‐plane switching (IPS) has been quite effective in improving viewing angle. However, there may be difficulty in adopting conventional IPS to higher‐definition displays because it suffers from limited storage capacitance and reduced transmittance. A new comb‐on‐plane switching (COPS) electrode design is proposed. Compared to conventional IPS, COPS allows for lower switching voltage and offers advantages including naturally scalable storage capacitance, wide viewing angle with TN‐like high transmittance, and low color dispersion.     

Novel application of ink‐jet‐printing technology in multi‐domain alignment liquid‐crystal displays

Abstract— Based on the drop‐on‐demand characteristics of ink‐jet printing, the multi‐domain alignment liquid‐crystal display (LCD) could be achieved by using patterned polyimide materials. These polyimide ink locations with different alignment procedures could be defined in a single pixel, depending on the designer 's setting. In this paper, we combined the electro‐optical design, polyimide ink formulation, and ink‐jetting technology to demonstrate the application of multi‐domain alignment liquid‐crystal display manufactory. The first one was a multi‐domain vertical‐alignment LCD. After the horizontal alignment material pattern on the vertical alignment film, the viewing angle would reach 150° without compensation film. The second one was a single‐cell‐gap transflective LCD within integrating the horizontal alignment in the transmissive region and hybrid alignment in the reflective one in the same pixel. In addition, this transflective LCD was also demonstrated in the form of a 2.4‐in. 170‐ppi prototype.     

Liquid‐crystal photoaligning by azo dyes (Invited Paper)

Abstract— Liquid‐crystal (LC) photoalignment using azo dyes is described. It will be shown that this photoaligning method can provide a highly uniform alignment with a controllable pretilt angle and strong anchoring energy of the LC cell, as well as a high thermal and UV stability. The application of LC photoalignment to the fabrication of various types of liquid‐crystal displays, such as VAN‐LCDs, FLCDs, TN‐LCDs, and microdisplays, on glass and plastic substrates is also discussed. Azo‐dye photoaligned super‐thin polarizers and phase retarders are considered as new optical elements in LCD production, in particular for transflective displays.     

Effects of carbon‐nanotube doping on the performance of a TN‐LCD

Abstract— The electro‐optical characteristics of a 90° twisted‐nematic liquid‐crystal display (TN‐LCD) were analyzed. The test cell was composed of a minute amount of dopant, multiwalled carbon nanotubes, and a standard nematic mixture, E7, used in TN‐LCDs with direct addressing. Under the experimental conditions, no hystereses in optical transmittance were observed in either the doped cell or a neat counterpart under an applied ac voltage. Experimental results show that doping with nanotubes rectifies the electro‐optical properties of the cells by reducing the driving voltage as well as the rise time. Similar results were found in a TN cell of a TFT‐grade liquid crystal instead of the mixture consisting completely of polar compounds.     

Narrow‐gap field‐sequential TN‐LCD with and without nanoparticle doping

Abstract— The fabrication and demonstration of field‐sequential‐color (FSC) LCDs using modules of narrow‐gap twisted‐nematic (NTN) LCDs with and without doping of newly synthesized PγCyD‐ZrO² nanoparticles is reported. Two types of FSC‐LCDs are demonstrated: one is a direct multiplexed NTN‐LCD and the other is TFT driven. The advantages of FSC‐LCDs include their high legibility even under direct sunlight, and the mechanism for the doping of nanoparticles in LCDs is discussed.     

Ultra‐FFS TFT‐LCD with super image quality,fast response time,and strong pressure‐resistant characteristics

Fringe‐field‐switching (FFS) devices using liquid‐crystal (LC) with a negative dielectric anisotropy exhibit high transmittance and wide viewing angle simultaneously. Recently, we have developed an “Ultra‐FFS” thin‐film‐transistor (TFT) LCD using LC with a positive dielectric anisotropy that exhibits high transmittance, is color‐shift free, has a high‐contrast ratio in a wide range, experiences no crosstalk and has a fast response time of 25 msec. In this paper, the device concept is discussed, and, in addition, the pressure‐resistant characteristics of the devices compared with that of the twisted‐nematic (TN) LCD is discussed.     

Transflective TFT‐LCDs with high optical performance

Abstract— In order to reduce panel cost, reduce power consumption, and minimize thickness, a single panel with dual functions for high‐transmissive main displays and high reflective sub‐displays is becoming the trend. Two novel RGB‐W transflective 1.9‐in. a‐Si TFT LCDs have been developed to meet the requirements. By using the traditional seven‐mask dual‐cell‐gap structure, novel transflective tRGB‐t/rW TFT LCD and tRGB‐rW TFT‐LCD panels were fabricated with high transmittance and high reflectance, respectively. The optical clarity is excellent in both dark and bright conditions. Their superior optical performance is attributed to the high‐efficiency “transflective white” subpixel or “reflective white” subpixel.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

Review of viewing‐angle compensation of TN‐mode LCDs using WV film

Abstract— Wide‐view (WV) films for TN‐mode LCDs, which optimize the optical parameters of the polymerized discotic material (PDM) layer and cellulose triacetate (CTA) have been developed. The development concept of the WV film and realization of its concept in the past and for the future will be reviewed. In particular, the discotic molecular alignment control enabled the improvement of the contrast ratio at oblique viewing angles of TN‐mode LCDs. In addition, color shifts at oblique angles are important for large‐screen TN‐mode LCD monitors and LCD‐TV sets. To improve the color‐shift problem, new technologies have been developed.     

Photoalignment and photo‐patterning of planar and homeotropic liquid‐crystal‐display configurations

Abstract— Optical alignment and micro‐patterning of the alignment of liquid‐crystal displays (LCDs) by linear photopolymerization (LPP) technology renders high‐quality multi‐domain twisted‐nematic (TN) and supertwisted‐nematic (STN) displays with broad fields of view over wide temperature ranges feasible. The prerequisites are the generation of photo‐induced high‐resolution azimuthal alignment patterns with defined bias‐tilt angles 0° ≤ θ ≤ 90°. For the first time, LPP‐aligned single‐ and dual‐domain vertically aligned nematic LCDs (VAN‐LCDs) are presented. Dual‐domain VAN‐LCDs are shown to exhibit broad fields of view which are further broadened by combining the displays with LPP‐aligned optical compensators made of liquid‐crystal polymers.     

Technologies towards patterned optical foils applied to transflective LCDs

Abstract— For better front‐of‐screen performance for transflective LCDs, a technology with extra free optimization parameters for the optical stack is needed. Thin wet coatable retarders which enable adjustment of the optical activity on the (sub)pixel level have been developed. Isotropic domains have been created in nematic retardation films by thermal patterning or photopatterning. Employing such a patterned retarder in a transflective LCD leads to an LCD that is lighter and thinner with good reflectivity, high transmission, and low chromaticity at all gray levels and wide viewing angles. The patterned thin‐film technology has been proven to be versatile and applicable in various LCD designs.     

A broadband wide‐incident‐angle reflective polarization converter

Abstract— A high‐performance reflective polarization converter which could be used in a backlight recycling system for liquid‐crystal‐display (LCD) devices is proposed. The device consists of a twisted‐nematic (TN) liquid‐crystal film, a uniaxial A‐plate, and a reflector. The configuration parameters, such as thickness and orientation of the films, are optimized using a genetic algorithm. As a result, the design can convert light from TM to TE polarization (or TE to TM) at a maximum 99.7%, minimum 91.3%, and average 96.7% conversion efficiency for the entire visible spectrum and incident angle from 0 to 60°. Such a broadband reflective polarization converter is particularly useful for enhancing the light efficiency and reducing the power consumption of LCDs.