15‐in. RGBW panel using two‐stacked white OLED and color filters for large‐sized display applications

Abstract— A 15‐in. HD panel employing two‐stacked WOLEDs and color filters for which the color gamut can be as high as 101.2% (CIE1976) and the power consumption is 5.22 W. The WOLEDs exhibit a current efficiency of 61.3 cd/A and a power efficiency of 30 lm/W at 1000 nits and their CIE coordinate is (0.340, 0.334). A 15‐in. RGBW panel was investigated to verify the electrical and optical performance compared to that of a 15‐in. RGB TV made by using FMM technology. The characteristics of the 15‐in. RGBW panel are comparable to those of the 15‐in. RGB panel. Color filters combined with WOLEDs is a possible patterning technology for large‐sized OLED TV, which surpasses the limits of fine‐metal‐mask technology.     

Micro‐cavity design of bottom‐emitting AMOLED with white OLED and RGBW color filters for 100% color gamut

Abstract— Two optical structures used for a bottom‐emitting white organic light‐emitting diode (OLED) is reported. An RGBW color system was employed because of its high efficiency. For red, green, and blue (RGB) subpixels, the cavity resonance was enhanced by the use of a dielectric mirror, and for the white (W) subpixel, the mirror was removed. The optical length of the cavities was controlled by two different ways: by the thickness of the dielectric filter on top of the mirror or by the angle of oblique emission. With both methods, active‐matrix OLEDs (AMOLEDs) that reproduced a color gamut exceeding 100% of the NTSC (National Television System Committee) standard were fabricated. More importantly, the transmission of a white OLED through R/G/B color filters was significantly higher (up to 50%) than that of a conventional structure not employing a mirror, while at the same time as the color gamut increased from ～75 to ～100% NTSC.     

A 13.5‐in. Quad‐FHD flexible CAAC‐OS AMOLED display with long‐life OLED device structure

In this study, the device structure of a white tandem organic light‐emitting diode (OLED) was changed to control the emission area and thereby achieve less luminance decay. A long‐life 13.5‐inch 4 K flexible c‐axis‐aligned crystal oxide semiconductor (CAAC‐OS) active‐matrix OLED with less color shift and high resolution was fabricated using this long‐life white OLED, transfer technology, and a CAAC‐OS field‐effect transistor.     

Effects of display properties on perceived color‐gamut volume and preference

Abstract— The effect of varying the color gamut of an extended‐gamut LCD on color appearance and preference was measured psychometrically in two experiments at each of two separate laboratories over a representative set of 10 images each. The first experiment measured the effect of color gamut on appearance, and the effect on the appearance attribute colorfulness was shown to be relatively strong compared with other attributes as the volume of display color gamut is varied. Overall, colorfulness monotonically increased at constant sensitivity as the gamut area in xy chromaticities increased while tending to become less and less sensitive to increasing the gamut volumes in CIELAB and CIECAM02. In the second experiment, the overall preference indicated an optimal color gamut for the display gamut volume even though the results were shown to be highly scene dependent.     

A flexible full‐color AMOLED display driven by OTFTs

Abstract— Organic thin‐film‐transistor (OTFT) technologies have been developed to achieve a flexible backplane for driving full‐color organic light‐emitting diodes (OLEDs) with a resolution of 80 ppi. The full‐color pixel structure can be attained by using a combination of top‐emission OLEDs and fine‐patterned OTFTs. The fine‐patterned OTFTs are integrated by utilizing an organic semiconductor (OSC) separator, which is an insulating wall structure made of an organic insulator. Organic insulators are actively used for the OTFT integration, as well as for the separator, in order to enhance the mechanical flexibility of the OTFT backplane. By using these technologies, active‐matrix OLED (AMOLED) displays can be driven by the developed OTFT backplane even when they are mechanically flexed.     

PIN‐OLEDs for active‐matrix‐display use

Abstract— Novaled's PIN‐OLED® technology allows for highly efficient, temperature stable, and long‐lived OLEDs suited for a variety of display applications. This paper delivers an overview about Novaled's state of the art, including top‐ and bottom‐emitting structures. It is discussed how PIN‐OLEDs give rise to an increased manufacturing yield. The main focus of this paper is the development of white OLEDs for display use. When the RGBW color‐filter approach is used in combination with white OLEDs, the resulting full‐color OLED display is able to deliver high color quality and remain highly power efficient. For such a case, the manufacturing infrastructure of OLEDs for lighting can be used. We use tandem architectures, bottom‐ and top‐emission architectures, and developed specific high‐temperature stable OLED stacks. The importance of matching color coordinates of the white OLED and the targeted display white color point is of outstanding importance. Results have mainly been achieved under the German‐funded project CARO and the European‐funded project AMAZOLED.     

Fluorescent‐based tandem white OLEDs designed for display and solid‐state‐lighting applications

Abstract— Highly efficient tandem white OLEDs based on fluorescent materials were developed for display and solid‐state‐lighting (SSL) applications. In both cases, the white OLED must have high power efficiency and long lifetime, but there are a number of attributes unique to each application that also must be considered. Tandem OLED technology has been demonstrated as an effective approach to increase luminance, extend OLED lifetime, and allow for use of different emitters in the individual stacks for tuning the emission spectrum to achieve desired performance. Here, examples of bottom‐emission tandem white OLEDs based on small‐molecule fluorescent emitters designed for displays and for SSL applications are reported. A two‐stack tandem white OLED designed for display applications achieved 36.5‐cd/A luminance efficiency, 8500K color temperature, and lifetime estimated to exceed 50,000 hours at 1000 cd/m². This performance is expected to meet the specifications for large AMOLED displays. A two‐stack tandem white OLED designed for SSL applications achieved 20‐lm/W power efficiency, 38‐cd/A luminance efficiency, 3500K color temperature, and lifetime estimated to exceed 140,000 hours at 1000 cd/m². With the use of proven light‐extraction techniques, it is estimated that this tandem device will exceed 40 lm/W with more than 500,000‐hour lifetime, performance that should be sufficient for first‐generation lighting products.     

A novel spectrum‐sequential display design with a wide color gamut and reduced color breakup

Abstract— The advantage of RGB color‐sequential displays is that they have no color filters, but the disadvantage is that they need to run at high refresh rates (> >180 Hz) to prevent flicker and color breakup. An alternative color‐sequential display, which can operate at relatively low refresh rates (～ 100 Hz) without disturbing color breakup or flicker, has been developed. The display has two color filters per pixel (cyan and magenta) on the LCD panel and the backlight can generate two types of spectra (blue‐green and green‐red), which results in a wide gamut four‐primary display, effectively. One part of the paper describes the color reproduction, including color‐filter design, gamut mapping, and multi‐primary conversion. The other part deals with the reduced perception of color breakup on the novel spectrum‐sequential display compared to conventional color‐sequential displays.     

Power‐saving primary design for displays enclosing a target color gamut

Abstract— Display primaries are optimized for the trade‐off between the total primary power and color gamut under the requirement that a target color gamut is enclosed by the color gamut of the display. LED displays and HDTV color gamut are taken as examples. Compared to the display using a set of typical commercial RGB LEDs, it was found that a total optical (electrical) power of 23.6% (15.6%) can be saved for the display using optimal RGB LEDs. Although the size of the display color gamut is sacrificed, the color gamut of the display using optimal RGB LEDs still encloses the HDTV color gamut. The combined effect of the LED luminous efficiency and white‐point condition on the determination of the optimal LED wavelengths and bandwidths is also studied.     

Improvement in image quality of a 5.8‐in. OTFT‐driven flexible AMOLED display

Abstract— The image quality of an OTFT‐driven flexible AMOLED display has been improved by enhancing the performance of OTFTs and OLEDs. To reduce the operating voltage of OTFTs on a plastic film, Ta²O⁵ with a high dielectric constant was used as a gate insulator. The organic semiconductor layer of the OTFT was successfully patterned by a polymer separator, which is an isolating wall structure using an organic material. The OTFT performance, such as its current on/off ratio, carrier mobility, and spatial uniformity on the backplane, was enhanced. A highly efficient phosphorescent OLED was used as a light‐emission device. A very thin molybdenum oxide film was introduced as a carrier‐injection layer on a pixel electrode to reduce the operating voltage of the OLED. After an OTFT‐driven flexible AMOLED display was fabricated, the luminance and uniformity on the display was improved. The fabricated display also showed clear moving images, even when it was bent at a low operating voltage.     

White LEDs using the sharp β‐sialon: Eu phosphor and Mn‐doped red phosphor for wide‐color gamut display applications

The sharp β‐sialon (Si_6‐zAl_zO_zN_8‐z : 0 < z < 0.1):Eu green phosphor, combining with a blue LED and CaAlSiN₃:Eu red phosphor, is suitable for the wide‐color gamut white LEDs backlighting system, because of its sharp and asymmetric emission spectrum shape. However, the color gamut and the brightness of the aforementioned display is restricted because of the wide emission band of the CaAlSiN₃:Eu red phosphor. In this work, we used K₂SiF₆:Mn as an alternate red phosphor, which has a sharp emission spectrum. The display with the white LED using sharp β‐sialon:Eu and K₂SiF₆:Mn shows a wide‐color gamut, which covers the hole NTSC triangle. The use of K₂SiF₆:Mn enables to realize not only a wider color gamut but also a higher brightness of displays, compared with the use of CaAlSiN₃:Eu. Furthermore, it is confirmed that the white LED using sharp β‐sialon:Eu and K₂SiF₆:Mn is stable against temperature and also durable under the accelerated drive conditions.     

A 5.5‐inch full HD foldable AMOLED display based on neutral‐plane splitting concept

Splitting of the mechanical neutral plane is a promising concept for foldable displays because it reduces the folding stress in each layer of the display. We verified the splitting concept experimentally and revealed a linear relation between the relative position of the neutral plane and the logarithm of the adhesive's elastic modulus. As the modulus decreased, the position of the neutral plane approached that of perfect splitting. On the basis of the neutral‐plane splitting concept, we developed 5.5‐inch full high‐definition foldable active matrix organic light‐emitting diode (AMOLED) displays, which endured 150 k inward folding cycles and 150 k outward folding cycles with folding radii of 3 and 5 mm, respectively. This study is expected to improve the flexibility of designing foldable AMOLED displays, enabling better balance of the portability versus practicality trade‐off in mobile displays.     

A method for selecting display primaries to match a target color gamut

Abstract— A method for selecting primaries of a wide‐gamut display is proposed, in which display color gamut is designed to match a target color gamut in CIELAB color space. A standard deviation of the relative maximum chroma of display and target color gamuts is defined. The selection method optimizes display primaries for the minimum standard deviation so that display and target color gamuts are similar in shape. It is shown that the color gamut of a laser display designed by this method is similar in shape to the theoretical maximum, or optimal, color gamut of objects. It is also shown that the color gamut of an LED display can be designed to include 99.7% of the gamut of Pointer's real‐world surface colors. LED primaries are selected to minimize the standard deviation of the relative maximum chroma of effective display color gamut and a target color gamut which is defined to include Pointer's real‐world surface colors. For both the laser and LED displays, it is necessary to constrain the red‐primary wavelength to avoid excessive optical power for the red primary.     

Development of 8‐in. oxide‐TFT‐driven flexible AMOLED display using high‐performance red phosphorescent OLED

An 8‐in. flexible active‐matrix organic light‐emitting diode (AMOLED) display driven by oxide thin‐film transistors (TFTs) has been developed. In‐Ga‐Zn‐O (IGZO)‐TFTs used as driving devices were fabricated directly on a plastic film at a low temperature below 200 °C. To form a SiO_x layer for use as the gate insulator of the TFTs, direct current pulse sputtering was used for the deposition at a low temperature. The fabricated TFT shows a good transfer characteristic and enough carrier mobility to drive OLED displays with Video Graphic Array pixels. A solution‐processable photo‐sensitive polymer was also used as a passivation layer of the TFTs. Furthermore, a high‐performance phosphorescent OLED was developed as a red‐light‐emitting device. Both lower power consumption and longer lifetime were achieved in the OLED, which used an efficient energy transfer from the host material to the guest material in the emission layer. By assembling these technologies, a flexible AMOLED display was fabricated on the plastic film. We obtained a clear and uniform moving color image on the display.     

Top‐emission AMOLED display driven by organic TFTs with semiconductor layer patterned by inkjet process

We have developed an inkjet process for laying down an organic semiconductor layer in organic thin‐film transistors (OTFTs). The organic semiconductor crystallinity was improved by adjusting the contact angles of the bank, the gate insulator, and the source/drain electrodes. The threshold voltage of the OTFT was controlled by means of several surface treatments of the silicon dioxide gate insulator. The OTFTs showed a high mobility of 2.5 cm²/Vs and uniform threshold voltages of ?0.4 ± 0.7 V. We also fabricated a 4‐in., 80‐ppi active‐matrix organic light‐emitting diode on a glass substrate that showed good luminance uniformity and high moving picture quality.     

The influence of unilateral acceleration on color‐gamut properties of a TFT‐LCD

Abstract— This letter describes experiments in which a TFT‐LCD was exposed to unilateral acceleration amplitudes of different temporal profiles and durations. The results show that the color gamut is extended by increasing the load amplitude. Following the loading, the color gamut recedes and gradually approaches the reference range.     

High‐performance white OLEDs with high color‐rendering index for next‐generation solid‐state lighting

Abstract— Several white‐OLED structures with a high color‐rendering index (CRI) were investigated for lighting applications. A two‐unit fluorescent/phosphorescent hybrid white OLED achieved an excellent CRI of 95, high luminous efficacy of 37 lm/W, and long lifetime of over 40,000 hours at 1000 cd/m². White‐OLED lighting panels of 8 × 8 cm for high‐luminance operation were fabricated, and a stable emission at 3000 cd/m² was confirmed. Quite a small variation in chromaticity in a different directions was achieved by using an optimized optical device structure. With a light‐outcoupling substrate, a higher efficacy of 56 lm/W, high CRI of 91, and longer half‐decay lifetime of over 150,000 hours at 1000 cd/m² was achieved. All‐phosphorescent white OLEDs placed on the light‐outcoupling substrate show a high CRI of 85 and higher efficacy of 65 lm/W with a fairly good half‐decay lifetime of over 30,000 hours. With a further voltage reduction and a high‐index spherical extractor, 128 lm/W at 1000 cd/m² has been achieved.     

Paradigm for achieving color‐reproduction accuracy in LCDs for medical imaging

Abstract— A methodology and associated software modules for calibration, characterization, and profiling of color LCDs for color‐critical applications in medical imaging is described. Supporting analyses reveal very high color‐reproduction accuracy as determined by CIE DE2000 color differences for 21 0 test colors uniformly distributed in CIE Lab color space. The impact of the LCD tone‐reproduction curve on color‐reproduction accuracy is compared for two tone‐reproduction curves of special interest in medical imaging: the DICOM gray‐scale standard display function and the CIE L* standard lightness function. The initial results from a psychophysical investigation of the diagnostic performance of trained pathologists viewing “virtual” breast biopsy slides are reported and the diagnostic performance achieved with calibrated, color‐managed LCDs with uncalibrated LCDs without the benefits of color management is compared.     

Processes,characterizations, and system applications of color‐filter liquid‐crystal‐on‐silicon microdisplays

Abstract— A color‐filter liquid‐crystal‐on‐silicon (CF‐LCOS) microdisplay that integrates color filters on silicon for color will be presented. The color‐filter process on silicon was optimized to achieve fine resolution and precise alignment of the color filters on the pixel array, good adhesion to the silicon suface, and a flat surface for the liquid‐crystal cell assembly. Important optical and electrical parameters of the color filters were extracted to establish an electro‐optical model of the CF‐LCOS microdisplays for device simulation. Thermal, chemical, and light‐stability characterizations were performed to ensure the stabilty of the color filters and CF‐LCOS microdisplays. With color CF‐LCOS microdisplays already available, the projection or viewing optics is greatly simplified. This CF‐LCOS microdisplay is ideal for near‐to‐eye displays because of its low‐power consumption and compactness. The CF‐LCOS microdisplay could also withstand medium light illumination for medium‐sized projectors. A single‐panel projector based on one CF‐LCOS microdisplay of 1280 × 768 × RGB resolution was demonstrated.     

Wearable 4‐in. QVGA full‐color‐video flexible AMOLEDs for rugged applications

Abstract— Work on the world's first wrist‐worn communications device built on a flexible, low‐power‐consumption full‐color AMOLED using phosphorescent OLEDs is presented. The device offers the wearer the ability to see high‐information‐content video‐rate information in a thin‐and‐rugged‐form‐factor 4‐in. QVGA display, conformed around a human wrist.