Spatially resolved recording of transient fluorescence‐lifetime effects by line‐scanning TCSPC

We present a technique that records transient changes in the fluorescence lifetime of a sample with spatial resolution along a one‐dimensional scan. The technique is based on scanning the sample with a high‐frequency pulsed laser beam, detecting single photons of the fluorescence light, and building up a photon distribution over the distance along the scan, the arrival times of the photons after the excitation pulses and the time after a stimulation of the sample. The maximum resolution at which lifetime changes can be recorded is given by the line scan period. Transient lifetime effects can thus be resolved at a resolution of about one millisecond. We demonstrate the technique for recording photochemical and nonphotochemical chlorophyll transients in plants and transient changes in free Ca²⁺ in cultured neurons. Microsc. Res. Tech. 77:216–224, 2014. © 2014 Wiley Periodicals, Inc.     

Real-time cellular uptake of serotonin using fluorescence lifetime imaging with two-photon excitation

The real-time uptake of serotonin, a neurotransmitter, by rat leukemia mast cell line RBL-2H3 and 5-hydroxytryptophan by Chinese hamster V79 cells has been studied by fluorescence lifetime imaging microscopy (FLIM), monitoring ultraviolet (340 nm) fluorescence induced by two-photon subpicosecond 630 nm excitation. Comparison with two-photon excitation with 590 nm photons or by three-photon excitation at 740 nm shows that the use of 630 nm excitation provides optimal signal intensity and lowered background from auto-fluorescence of other cellular components. In intact cells, we observe using FLIM three distinct fluorescence lifetimes of serotonin and 5-hydroxytryptophan according to location. The normal fluorescence lifetimes of both serotonin (3.8 ns) and 5-hydroxytryptophan (3.5 ns) in solution are reduced to approximately 2.5 ns immediately on uptake into the cell cytosol. The lifetime of internalized serotonin in RBL-2H3 cells is further reduced to approximately 2.0 ns when stored within secretory vesicles.     

Optimized temporal response in multichannel two-photon fluorescence lifetime microscopy using a photonic crystal fibre

The integration of fibre optics into an imaging system for the convenient delivery and collection of light has resulted in many hybrid forms of novel biomedical optical instrumentation. Although it is extremely robust and cost effective, fibre integration requires special consideration in a time‐domain fluorescence lifetime imaging schema where multipath propagation in the fibre causes significant spread in photon transit times. In this study, we investigated the effect of the length of a multimode collection fibre on the temporal performance of a multichannel fluorescence lifetime microscope and demonstrated the effectiveness of a photonic crystal fibre as a means of optimizing the collection and delivery of emitted fluorescence in terms of temporal resolution. The findings are pertinent to all studies that employ a multimode optical fibre to collect and deliver an emitted fluorescence signal from a sample to a remote detector for measurement of the characteristic fluorescence lifetime.     

Compact multiphoton/single photon laser scanning microscope for spectral imaging and fluorescence lifetime imaging

An inverted fluorescence microscope was upgraded into a compact three-dimensional laser scanning microscope (LSM) of 65 x 62 x 48 cm dimensions by means of a fast kHz galvoscanner unit, a piezodriven z-stage, and a picosecond (ps) 50 MHz laser diode at 405 nm. In addition, compact turn-key near infrared femtosecond lasers have been employed to perform multiphoton fluorescence and second harmonic generation (SHG) microscopy. To expand the features of the compact LSM, a time-correlated single photon counting unit as well as a Sagnac interferometer have been added to realize fluorescence lifetime imaging (FLIM) and spectral imaging. Using this unique five-dimensional microscope, TauMap, single-photon excited (SPE), and two-photon excited (TPE) cellular fluorescence as well as intratissue autofluorescence of water plant leaves have been investigated with submicron spatial resolution, <270 ps temporal resolution, and 10 nm spectral resolution.     

Double-pulse fluorescence lifetime measurements

It is demonstrated that fluorescence lifetimes in the nanosecond and picosecond time-scale range can be observed with the recently proposed double-pulse fluorescence lifetime imaging technique (Müller et al. , 1995, Double-pulse fluorescence lifetime imaging in confocal microscopy. J. Microsc 177, 171–179).
A laser source with an optical parametric amplifier (OPA) system is used to obtain short pulse durations needed for high time resolution, wavelength tunability for selective excitation of specific fluorophores and high pulse energies to obtain (partial) saturation of the optical transition.
It is shown that fluorescence lifetimes can be determined correctly also with nonuniform saturation conditions over the observation area.
A correction scheme for the effect on the measurements of laser power fluctuations, which are inherently present in OPA systems, is presented. Measurements on bulk solutions of Rhodamine B and Rhodamine 6G in different solvents confirm the experimental feasibility of accessing short fluorescence lifetimes with this technique.
Because signal detection does not require fast electronics, the technique can be readily used for fluorescence lifetime imaging in confocal microscopy, especially when using bilateral scanning and cooled CCD detection.     

Navigating transdermal diffusion with multiphoton fluorescence lifetime imaging

We demonstrate the potential of fluorescence lifetime imaging by time-correlated single-photon counting as a method for monitoring the transdermal diffusion pathway and diffusion rate of pharmaceuticals in human skin. The current application relies on observing subtle changes in the fluorescence lifetime of the intrinsic fluorophores present in the intracellular region between corneocytes of the stratum corneum. We have comprehensively characterized the measured fluorescence lifetimes from intracorneocyte junctions in three skin section types (dermatomed skin, epidermal membranes and stratum corneum) revealing statistically significant differences of the short lifetime component between each of the types, which we attribute to the sample preparation and imaging method. We show using epidermal membrane sections that application of a drug/solvent formulation consisting of ethinyl estradiol and spectroscopic grade ethanol to the surface gives rise to a slight but statistically significant shortening of the fluorescence lifetime of the long-lived emitting species present in the sample, from approximately 2.8 ns to 2.5 ns. The method may be useful for future studies where the kinetics and pathways of a variety of applied formulations could be investigated.     

Two-photon excited lifetime imaging of autofluorescence in cells during UV A and NIR photostress

By monitoring coenzyme autofluorescence modifications. as an indicator of cell damage. the cellular response to femtosecond near-infrared (NIR) radiation (two-photon absorption) was compared with exposure to low-power UV A radiation (one-photon absorption). Excitation radiation from a tunable Ti-sapphire laser. focused through highnumerical- aperture microscope optics. provided diffractionlimited mlcrobeams of an adjustable peak power. Laser scanning NIR microscopy was used to detect spatially the intracellular distribution of fluorescent coenzymes by fluorescence intensity imaging as well as fluorescence lifetime imaging (_T-mapping). Upon the onset of UV or NIR exposure. Chinese hamster ovary cells exhibited blue/green autofluorescence witq a mean lifetime of 2·2 ns. which was attributed to NAD(P)H in mitochondria. Exposure to 365 nm radiation from a high-pressure mercury lamp (1 m W. 300 J cm^-2 ) resulted in oxidative stress correlated with increased autofluorescence intensity. onset of nuclear fluorescence. and a fluorescence lifetime decrease. The cellular response to femtosecond NIR micro beams depended significantly on peak power. Peak powers above a threshold value of about 0·5kW (average power: 6mW). 0·55kW (7mW) and 0·8kW (lOmW) at 730nm. 760nm and 800nm. respectively. resulted in the onset of short-lived luminescence with higher intensity (100x) than the intracellular NAD(P)H fluorescence. This luminescence. accompanied by destruction of cellular morphology. was localized and occurred in the mitochondrial region. In contrast. beams at a power of less than 0·5 kW allowed nondestructive fluorophore detection with high spatial and temporal resolution without modification of cellular redox state or cell morphology.     

Time-domain whole-field fluorescence lifetime imaging with optical sectioning

A whole-field time-domain fluorescence lifetime imaging (FLIM) microscope with the capability to perform optical sectioning is described. The excitation source is a mode-locked Ti:Sapphire laser that is regeneratively amplified and frequency doubled to 415 nm. Time-gated fluorescence intensity images at increasing delays after excitation are acquired using a gated microchannel plate image intensifier combined with an intensified CCD camera. By fitting a single or multiple exponential decay to each pixel in the field of view of the time-gated images, 2-D FLIM maps are obtained for each component of the fluorescence lifetime. This FLIM instrument was demonstrated to exhibit a temporal discrimination of better than 10 ps. It has been applied to chemically specific imaging, quantitative imaging of concentration ratios of mixed fluorophores and quantitative imaging of perturbations to fluorophore environment. Initially, standard fluorescent dyes were studied and then this FLIM microscope was applied to the imaging of biological tissue, successfully contrasting different tissues and different states of tissue using autofluorescence. To demonstrate the potential for real-world applications, the FLIM microscope has been configured using potentially compact, portable and low cost all-solid-state diode-pumped laser technology. Whole-field FLIM with optical sectioning (3D FLIM) has been realized using a structured illumination technique.     

Digital scanned laser light-sheet fluorescence lifetime microscopy with wide-field time-gated imaging

We develop a multidimensional fluorescence imaging technique by implementing a wide-field time-gated fluorescence lifetime imaging into digital scanned laser light-sheet microscopy (FLIM-DSLM) to measure 3D fluorescence lifetime distribution in mesoscopic specimens with high resolution. This is achieved by acquiring a series of time-gated images at different relative time delays with respect of excitation pulses at different depths. The lifetime is determined for each voxel by iteratively fitting to single exponential decay. The performance of the developed system is evaluated with the measurements of a lifetime reference Rhodamine 6G solution and a subresolution fluorescent bead phantom. We also demonstrate the application performances of this system to ex vivo and in vivo imaging of Tg(kdrl:EGFP) transgenic zebrafish embryos, illustrating the lifetime differences between the GFP signal and the autofluorescence signal. The results show that FLIM-DSLM can be used for sample size up to a few millimetres and can be utilised as a powerful and robust method for biomedical research, for example as a readout of protein–protein interactions via Förster resonance energy transfer.     

Multiphoton fluorescence lifetime imaging of 3D-stem cell spheroids during differentiation

Long-term high-resolution multiphoton imaging of nonlabeled human salivary gland stem cell spheroids has been performed with submicron spatial resolution, 10.5-nm spectral resolution, and picosecond temporal resolution. In particular, the two-photon-excited coenzyme NAD(P)H and flavins have been detected by time-correlated single photon counting (TCSPC). Stem cells increased their autofluorescence lifetimes and decreased their total fluorescence intensity during the adipogenic-differentiation process. In addition, the onset of the biosynthesis of lipid vacuoles was monitored over a period of several weeks in stem-cell spheroids. Time-resolved multiphoton autofluorescence imaging microscopes may become a promising tool for marker-free stem-cell characterization and cell sorting.     

Correlated fluorescence lifetime and spectral measurements in living cells

Studies of proteins' interaction in cells by FRET can take benefit from two important photo-physical properties describing fluorescent proteins: fluorescence emission spectrum and fluorescence lifetime. These properties provide specific and complementary information about the tagged proteins and their environment. However, none of them taken individually can completely quantify the involved fluorophore characteristics due to their multiparametric dependency with molecular environment, experimental conditions, and interpretation complexity. A solution to get a better understanding of the biological process implied at the cellular level is to combine the spectral and temporal fluorescence data acquired simultaneously at every cell region under investigation. We present the SLiM-SPRC160, an original temporal/spectral acquisition system for simultaneous lifetime measurements in 16 spectral channels directly attached to the descanned port of a confocal microscope with two-photon excitation. It features improved light throughput, enabling low-level excitation and minimum invasivity in living cells studies. To guarantee a fairly good level of accuracy and reproducibility in the measurements of fluorescence lifetime and spectra on living cells, we propose a rigorous protocol for running experiments with this new equipment that preserves cell viability. The usefulness of SLiM approach for the precise determination of overlapping fluorophores is illustrated with the study of known solutions of rhodamine. Then, we describe reliable FRET experiments in imaging mode realized in living cells using this protocol. We also demonstrate the benefit of localized fluorescence spectrum-lifetime acquisitions for the dynamic study of fluorescent proteins. proteins.     

Automatic segmentation of fluorescence lifetime microscopy images of cells using multiresolution community detection—a first study

Inspired by a multiresolution community detection based network segmentation method, we suggest an automatic method for segmenting fluorescence lifetime (FLT) imaging microscopy (FLIM) images of cells in a first pilot investigation on two selected images. The image processing problem is framed as identifying segments with respective average FLTs against the background in FLIM images. The proposed method segments a FLIM image for a given resolution of the network defined using image pixels as the nodes and similarity between the FLTs of the pixels as the edges. In the resulting segmentation, low network resolution leads to larger segments, and high network resolution leads to smaller segments. Furthermore, using the proposed method, the mean‐square error in estimating the FLT segments in a FLIM image was found to consistently decrease with increasing resolution of the corresponding network. The multiresolution community detection method appeared to perform better than a popular spectral clustering‐based method in performing FLIM image segmentation. At high resolution, the spectral segmentation method introduced noisy segments in its output, and it was unable to achieve a consistent decrease in mean‐square error with increasing resolution.     

Double-pulse fluorescence lifetime imaging in confocal microscopy

A theoretical analysis of a new technique for fluorescence lifetime measurement, relying on (near steady state) excitation with short optical pulses, is presented. Application of the technique to confocal microscopy enables local determination of the fluorescence lifetime, which is a parameter sensitive to the local environment of fluorescent probe molecules in biological samples. The novel technique provides high time resolution, since it relies on the laser pulse duration, rather than on electronic gating techniques, and permits, in combination with bilateral confocal microscopy and the use of a (cooled) CCD, sensitive signal detection over a large dynamic range. The principle of the technique is discussed within a theoretical framework. The sensitivity of the technique is analysed, taking into account: photodegradation, the effect of the laser repetition rate and the effect of non-steady-state excitation. The features of the technique are compared to more conventional methods for fluorescence lifetime determination.     

A modified phasor approach for analyzing time-gated fluorescence lifetime images

Fluorescence lifetime imaging is a versatile tool that permits mapping the biochemical environment in the cell. Among various fluorescence lifetime imaging techniques, time-correlated single photon counting and time-gating methods have been demonstrated to be very efficient and robust for the imaging of biological specimens. Recently, the phasor representation of lifetime images became popular because it provides an intuitive graphical view of the fluorescence lifetime content of the images and, when used for global analysis, significantly improves the overall S/N of lifetime analysis. Compared to time-correlated single photon counting, time gating methods can provide higher count rates (～10 MHz) but at the cost of truncating and under sampling the decay curve due to the limited number of gates commonly used. These limitations also complicate the implementation of the phasor analysis for time-gated data. In this work, we propose and validate a theoretical framework that overcomes these problems. This modified approach is tested on both simulated lifetime images and on cells. We demonstrate that this method is able to retrieve two lifetimes from time gating data that cannot be resolved using standard (non-global) fitting techniques. The new approach increases the information that can be obtained from typical measurements and simplifies the analysis of fluorescence lifetime imaging data.     

Time-gated fluorescence lifetime imaging and microvolume spectroscopy using two-photon excitation

A scanning microscope utilizing two-photon excitation in combination with fluorescence lifetime contrast is presented. The microscope makes use of a tunable femtosecond titanium:sapphire laser enabling the two-photon excitation of a broad range of fluorescent molecules, including UV probes. Importantly, the penetration depth of the two-photon exciting (infra)red light is substantially greater than for the corresponding single-photon wavelength while photobleaching is significantly reduced. The time structure of the Ti:Sa laser can be employed in a straightforward way for the realization of fluorescence lifetime imaging. The fluorescence lifetime is sensitive to the local environment of the fluorescent molecule. This behaviour can be used for example to quantify concentrations of ions, such as pH and Ca²⁺, or pO₂ and pCO₂. In the set-up presented here the fluorescence lifetime imaging is accomplished by time-gated single photon counting. The performance and optical properties of the microscope are investigated by a number of test measurements on fluorescent test beads. Point-spread functions calculated from measurements on 230-nm beads using an iterative restoration procedure compare well with theoretical expectations. Lifetime imaging experiments on a test target containing two different types of test bead in a fluorescent buffer all with different lifetimes (2.15 ns, 2.56 ns and 3.34 ns) show excellent quantitative agreement with reference values obtained from time correlated single photon counting measurements. Moreover, the standard deviation in the results can be wholly ascribed to the photon statistics. Measurements of acridine orange stained biofilms are presented as an example of the potential of two-photon excitation combined with fluorescence lifetime contrast. Fluorescence lifetime and intensity images were recorded over the whole sample depth of 100 μm. Fluorescence intensity imaging is seriously hampered by the rapid decrease of the fluorescence signal as a function of the depth into the sample. Fluorescence lifetime imaging on the other hand is not affected by the decrease of the fluorescence intensity.     

Imaging FRET standards by steady-state fluorescence and lifetime methods

Imaging fluorescence resonance energy transfer (FRET) between molecules labeled with fluorescent proteins is emerging as a powerful tool to study changes in ions, ligands, and molecular interactions in their physiological cellular environment. Different methods use either steady-state fluorescence properties or lifetime to quantify the FRET rate. In addition, some provide the absolute FRET efficiency whereas others are simply a relative index very much influenced by the actual settings and instrumentation used, which makes the interpretation of a given FRET rate very difficult. The use and exchange of FRET standards in laboratories using these techniques would help to overcome this drawback. We report here the construction and systematic evaluation of FRET standard probes of varying FRET efficiencies. The standards for intramolecular FRET were protein fusions of the cyan and yellow variants of A. victoria green fluorescent protein (ECFP and citrine) joined by short linkers or larger protein spacers, or ECFP tagged with a tetracysteine motif and labeled with the biarsenical fluorochrome, FlAsH. Negative and positive controls of intermolecular FRET were also used. We compared these FRET standards with up to four FRET quantification methods: ratioing of acceptor to donor emission, donor intensity recovery upon acceptor photobleach, sensitized emission after spectral unmixing of raw images, and fluorescence lifetime imaging (FLIM). The latter was obtained with a frequency-domain setup able to provide high quality lifetime images in less than a second, and is thus very well suited for live cell studies. The FRET rates or indexes of the standards were in good agreement regardless of the method used. For the CFP-tetraCys/FlAsH pair, the rate calculated from CFP quenching was faster than that obtained by FLIM.     

Two-photon fluorescence lifetime imaging microscopy of macrophage-mediated antigen processing

Two-photon fluorescence lifetime imaging microscopy was used noninvasively to monitor a fluorescent antigen during macrophage-mediated endocytosis, intracellular vacuolar encapsulation, and protease-dependent processing. Fluorescein-conjugated bovine serum albumin (FITC–BSA) served as the soluble exogenous antigen. As a relatively nonfluorescent probe in the native state, the antigen was designed to reflect sequential intracellular antigen processing events through time-dependent changes in fluorescence properties. Using two-photon lifetime imaging microscopy, antigen processing events were monitored continuously for several hours. During this time, the initial fluorescein fluorescence lifetime of 0.5 ns increased to α 3.0 ns. Control experiments using fluorescein conjugated poly- l -lysine and poly- d -lysine demonstrated that the increase in fluorescence parameters observed with FITC–BSA were due to intracellular proteolysis since addition of the inert d -isomer did not promote an increase in fluorescence lifetime or intensity. Comparisons of intravacuolar and extracellular FITC–dextran concentration suggested active localization of dextran in the vacuoles by the macrophage. In addition, the kinetics of degradation observed using two-photon microscopy were similar to results obtained on the flow cytometer, thus validating the use of flow cytometry for future studies.     

Image analysis for denoising full-field frequency-domain fluorescence lifetime images

Video-rate fluorescence lifetime-resolved imaging microscopy (FLIM) is a quantitative imaging technique for measuring dynamic processes in biological specimens. FLIM offers valuable information in addition to simple fluorescence intensity imaging; for instance, the fluorescence lifetime is sensitive to the microenvironment of the fluorophore allowing reliable differentiation between concentration differences and dynamic quenching. Homodyne FLIM is a full-field frequency-domain technique for imaging fluorescence lifetimes at every pixel of a fluorescence image simultaneously. If a single modulation frequency is used, video-rate image acquisition is possible. Homodyne FLIM uses a gain-modulated image intensified charge-coupled device (ICCD) detector, which unfortunately is a major contribution to the noise of the measurement. Here we introduce image analysis for denoising homodyne FLIM data. The denoising routine is fast, improves the extraction of the fluorescence lifetime value(s) and increases the sensitivity and fluorescence lifetime resolving power of the FLIM instrument. The spatial resolution (especially the high spatial frequencies not related to noise) of the FLIM image is preserved, because the denoising routine does not blur or smooth the image. By eliminating the random noise known to be specific to photon noise and from the intensifier amplification, the fidelity of the spatial resolution is improved. The polar plot projection, a rapid FLIM analysis method, is used to demonstrate the effectiveness of the denoising routine with exemplary data from both physical and complex biological samples. We also suggest broader impacts of the image analysis for other fluorescence microscopy techniques (e.g. super-resolution imaging).     

Multiphoton fluorescence lifetime imaging of human hair

In vivo and in vitro multiphoton imaging was used to perform high resolution optical sectioning of human hair by nonlinear excitation of endogenous as well as exogenous fluorophores. Multiphoton fluorescence lifetime imaging (FLIM) based on time-resolved single photon counting and near-infrared femtosecond laser pulse excitation was employed to analyze the various fluorescent hair components. Time-resolved multiphoton imaging of intratissue pigments has the potential (i) to identify endogenous keratin and melanin, (ii) to obtain information on intrahair dye accumulation, (iii) to study bleaching effects, and (iv) to monitor the intratissue diffusion of pharmaceutical and cosmetical components along hair shafts.     

The use of fluorescence lifetime imaging (FLIM) for in situ microbial detection in complex mineral substrates

The utility of fluorescence lifetime imaging microscopy (FLIM) for identifying bacteria in complex mineral matrices was investigated. Baseline signals from unlabelled Bacillus subtilis and Euglena gracilis, and Bacillus subtilis labelled with SYTO 9 were obtained using two-photon excitation at 730, 750 and 800 nm, identifying characteristic lifetimes of photosynthetic pigments, unpigmented cellular autofluorescence, and SYTO 9. Labelled and unlabelled B. subtilis were seeded onto marble and gypsum samples containing endolithic photosynthetic cyanobacteria and the ability to distinguish cells from mineral autofluorescence and nonspecific dye staining was examined in parallel with ordinary multichannel confocal imaging. It was found that FLIM enabled discrimination of SYTO 9 labelled cells from background, but that the lifetime of SYTO 9 was shorter in cells on minerals than in pure culture under our conditions. Photosynthetic microorganisms were easily observed using both FLIM and confocal. Unlabelled, nonpigmented bacteria showed weak signals that were difficult to distinguish from background when minerals were present, though cellular autofluorescence consistent with NAD(P)H could be seen in pure cultures, and phasor analysis permitted detection on rocks. Gypsum and marble samples showed similar autofluorescence profiles, with little autofluorescence in the yellow-to-red range. Lifetime or time-gated imaging may prove a useful tool for environmental microbiology. LAY DESCRIPTION : The standard method of bacterial enumeration is to label the cells with a fluorescent dye and count them under high-power fluorescence microscopy. However, this can be difficult when the cells are embedded in soil and rock due to fluorescence from the surrounding minerals and dye binding to ambiguous features of the substrate. The use of fluorescence lifetime imaging (FLIM) can disambiguate these signals and allow for improved detection of bacteria in environmental samples.