Salt-free reactive dyeing of betaine-modified cationic cotton fabrics with enhanced dye fixation

Novel cationic cotton fabrics were prepared by an efficient and simple one-step pad–dry–bake pretreatment process with betaine as cationic reagent. Ester bonds formed between cotton fibers and betaine hydrochloride were proved by Fourier transformed infrared attenuated total reflection(FTIR-ATR) spectra. Moreover, the properties of the cationic fabrics, including X-ray Diffraction(XRD), tensile strength and whiteness and yellowness index,were investigated in comparison with that of the untreated ones. The cationic fabrics were applied in salt-free dyeing of C.I. Reactive Red 195, C.I. Reactive Yellow 145 and C.I. Reactive Blue 19. Different dye fixation processes were applied and compared for untreated and cationic cotton. Dye fixation and color fastness properties of the dyes were tested, and the results presented that dye fixation on the cationic fabrics in the absence of salt was improved with satisfactory light fastness property and applicable wash and rub fastnesses.     

疏水性葸醌染料在聚乳酸织物上的染色性能

The dyeability of polylactide fabric has been investigated with the substituted aminoanthraquinone hydrophobic dyes.Their application to the polylactide fabric led to good exhaustion values and good wash fastness between 4 and 5.Microscopic assessment of cross-sections of the dyed polylactide fibres confirmed that these dyes could penetrate into the fibres.The nature of the substituted amino groups showed little influence on the wash fastness,but clearly influenced the exhaustion and light fastness.     

REACTIVE DISPERSE DYES FOR SYNTHETIC POLYMER FIBRES AND THEIR BLENDS WITH NATURAL FIBRE (Ⅲ) THE DYEING MECHANISM OF REACTIVE DISPERSE DYES CONTAINING β-HYDROXYETHYL SULPHONYL SULPHURIC ESTER GROUP FOR POLYESTERCOTTON BLEND

A study on the migration behavior of the reactive disperse dyes containing β-hydroxyethyl sulphonyl sulphuric ester group at different stages of dyeing and thermofixation on the polyester-cotton blend was made. The sublimation and vapor-phase transport of the dyes during thermofixation were examined. It was concluded that thermofixation conditions affect the dye distribution between cotton and polyester in the blend. The relationship between the distribution and the molecular structure of the dyes was examined. A dyeing mechanism of reactive disperse dyes for polyester-cotton blend was suggested.     

Innovation and application of dyes with high fixation

Reactive dyes are the main species for cotton dyeing due to their wide range of hue, satisfactory color fastness and facile application method. Aiming at increasing fixation on cotton fibers, benzimidazolone yellow reactive dyes, sulfonamide red reactive dyes and anthraquinone azo blue reactive dyes are designed. The preparation, characterization and application properties of these dyes with high fixation are introduced in detail. In order to achieve dye fixation to near 100%, macromolecular cro...     

一种新颖的含黄酮结构可交联高分子染料的合成与染色性能研究(英文)

A yellow crosslinking polymeric dye was prepared by grafting the flavone moiety containing azo chromophore onto polyvinylamine backbone.The λ max of this polymeric dye in water is 382 nm.The polymeric dye is fixed to silk and cotton with a crosslinking agent,2-chloro-4,6-di(aminobenzene-4’-β-sulphatoethylsulphone)-1,3,5-s-triazine,which acts as a bridge between the fiber and dye molecules.The fixation of this polymeric dye reaches 99% and the dyed samples exhibit excellent rubbing and washing fastness.     

基于颗粒动理学的气固喷射器流动特性三维数值模拟

A computational study on the flow behavior of a gas-solid injector by Eulerian approach was carried out. The gas phase was modeled with k-ε turbulent model and the particle phase was modeled with kinetic theory of granular flow. The simulations by Eulerian two-fluid model （TFM） were compared with the corresponding results by discrete element method （DEM） and experiments. It was showed that TFM simulated results were in reasonable agreement with the experimental and DEM simulated results. Based on TFM simulations, gas-solid flow pattern, gas velocity, particle velocity and the static pressure under different driving jet velocity, backpressure and convergent section angle were obtained. The results showed that the time average axial gas velocity sharply decreased and then slightly increased to a constant value in the horizontal conveying pipe. The time average axial particle velocity increased initially and then decreased, but in the outlet region of the convergent section the particle velocity remarkably increased once more to the maximal value. As a whole, the static pressure distribution change trends were found to be independent on driving gas velocity, backpressure and convergent section angle. However, the static pressure increased with increase of convergent section angle and gas jet velocities. The difference of static pressure to backpressure increased with increasing backpressure.     

[bmin]Cl/[FeCl3]离子液体催化的苯与1-十八烯烷基化反应

Abstract The study on the catalysis of ionic liquids for alkylation of benzene with 1-octadecene to synthesize LAB （linear alkylbenzenes） was performed. The results showed that the most important factor that governed the conversion of olefin and selectivity of LAB was reaction temperature. Moreover, the effects of different ionic liquids and molar ratio of benzene to 1-octadecene on the conversion and selectivity were obviously in different degrees. The reaction temperature, molar ratio of benzene to 1-octadecene and the amount of catalyst were lower, compared with the traditional reaction technologies. The experimental results demonstrated that the ionic liquid had higher activity at 30℃, with over 98% selectivity of monoalkylbenzene and 100% conversion of the olefin at the molar ratio 0.08 of FeCl3 in ionic liquid to 1-octadecene and 10 for benzene to 1-octadecene.     

Surface modification of polypiperazine-amide membrane by self-assembled method for dye wastewater treatment☆

Polypiperazine-amide membranes were modified with poly(ethyleneimine) (PEI) by self-assembled method, through which PEI molecules were fixed on the membrane surface by ionic interaction. In the experiments, the PEI concentration ranged from 50 to 2000 mg·L?1 while the depositing time was fixed at 20 min. The results showed that low PEI concentration resulted in a slight increase of pure water flux, which was attributed to the enhanced membrane surface hydrophilicity. The PEI adsorption on membrane surface had less effect on the re-jections to neutral PEG and sucrose, but improved the rejections to divalent cationic ions and methylene blue as the result of reversion of the membrane surface charge from negative to positive according to the XPS analysis and zeta potential measurements. The membrane modified at PEI=1500 mg·L?1 exhibited high rejection to methylene blue (MB) and is potential to be applied in the treatment of effluents containing positively charged dyes.     

支流电场中的单气泡行为

The investigation on bubble behavior in electric field helps to analyze the mechanism of electric enhancement of boiling heat transfer. Experiments were performed to investigate the bubble deformation in direct current （DC） electric field with bubbles attached to the orifice. The air bubbles were slowly generated in the transformer oil pool at different orifices, so that the effect of flow on bubble shape was eliminated. The results showed that the bubbles were elongated and the departure volume decreased when the electric field was intensified. The major and minor axes, aspect ratio and departure volume increased with increasing the orifice diameter. Both the electric field and orifice size have great influence on bubble behavior. The bubble deformation was also simulated to compare with the experimental results. The numerical and experimental data qualitatively agree with each other.     

用多粒模型模拟丁二烯气相聚合的颗粒增长

Gas phase polymerization of butadiene by neodymium catalyst was modeled. The effects of mass and heat transfer resistances in the external boundary layer and within particles, sorption of butadiene in polybutadiene,and deactivation of active sites on polymer particle growth and morphology were studied. Simulation results show that the effects of intraparticle mass and heat transfer resistances on the growth rate of polymer particles are insignificant, and that there is no significant effect of mass transfer resistance on the morphology of polymer particles.The simulation results were compared with the experimental results.     

非反应型阳离子助剂在一浴法无盐轧蒸染色工艺中的应用

使用自制的非反应型阳离子助剂对棉织物进行预处理,分别选用活性黄K-RN、活性艳红K-2BP、活性艳蓝KN-R进行一浴法无盐轧蒸染色试验.确定了阳离子助剂处理棉织物的最佳方式和使用的最佳浓度,并与常规有盐染色进行性能对比.结果表明,采用一浴法无盐轧蒸染色对染样的固色率、色光和牢度未产生影响.阳离子助剂的使用能够替代电解质的加入,染料利用率提高25％～40％.棉纤维阳离子化能够在相对较低的温度下进行,提高了该工艺的适用范围,最终达到节能减排的目的.     

Direct dyeing of cotton fabrics pre-treated with cationising agents

Pre-treatment of cotton fabrics with mono- and bis-reactive cationic agents produces a fibre that may be dyed with direct dyes under neutral conditions in the absence of salt. Fairly high degrees of exhaustion and fixation and improved wet fastness were achieved for all cases of cationised cotton fabrics compared to untreated samples. The results also indicate that cotton pre-treated with the bisreactive cationic agent shows higher degrees of dye exhaustion and fixation relative to cotton pretreated with the mono-reactive agent.     

Electrostatic self‐assembly dyeing of cotton fabrics

A new approach to the dyeing of cotton fabrics using an electrostatic self‐assembly method was evaluated. Cotton fabrics were pretreated with 2,3‐epoxypropyltrimethylammonuium chloride and cationic charges were produced on the fabric surfaces. For the dyeing of cotton fabric, reactive and acid dyes were used. Oppositely charged anionic reactive/acid dyes and cationic poly(diallyldimethylammonium chloride) were alternately deposited on the surface of cationised cotton fabrics. Ten multilayer films of dye/poly(diallyldimethylammonium chloride) were deposited on the cotton fabric surfaces using a padder. The build‐up of the multilayer films and the level of colour strength (K/S) achieved are discussed. Samples of cotton fabrics were also dyed with the same dyes, but using the exhaust method, and both types of dyed samples were compared. The washing, rubbing and light fastness properties were evaluated for the dyed fabrics.     

Deep‐coloured polyester/cotton blends with low concentrations of polymethylol dyes by a one‐pass continuous dyeing process

An obvious limitation of the one‐pass continuous dyeing process for polyester/cotton blends is its inability to achieve deep colour depth, which is caused by the low dye fixation yields of commercial reactive dyes. In this study, the performances of polyester/cotton blends dyed with high‐fixation polymethylol dyes and disperse dyes were compared with those of polyester/cotton blends dyed with a mixture of reactive dyes and disperse dyes. Polymethylol dyes were observed to be suitable for dyeing polyester/cotton blends when used in low concentrations; the required concentrations of polymethylol dyes were only 23–58% of the concentrations of commercial reactive dyes required to reach a given colour level on polyester/cotton blends. The wash and crocking fastness of polyester/cotton blends dyed with polymethylol dyes were similar to those of polyester/cotton blends dyed with reactive dyes.     

Continuous dyeing of cationised cotton with reactive dyes

Cotton fabrics pretreated with cationic starch have been dyed with reactive dyes by a continuous dyeing method and the pretreatment conditions influencing dyeability of the treated cotton investigated. Cationised cotton has been found to give level dyeing without the presence of salt and dye fixation is improved compared with untreated cotton. The dyeings show good wash and rub fastness.     

New polymer materials based on silicone‐acrylic copolymer to improve fastness properties of reactive dyes on cotton fabrics

New polymer materials, based on silicone‐acrylic copolymer containing cationic groups, were synthesized through radical mechanism and ring‐opening polymerization of cyclosiloxane. The polymers of polyacrylate/polysiloxane improved the fastness properties of reactive dyes on cotton. In comparison with those of polyacrylate‐containing cationic groups, the wash fastness and wet rubbing fastness of the dyed cotton fabric treated with the new polymer materials were better. The handle of the fabric with aftertreatment was also good. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 720–725, 2006     

阳离子水性聚氨酯的合成及其在染整中的应用

采用逐步聚合法,选用异佛尔酮二异氰酸酯（IPDI）和聚乙二醇（PEG1000）为预聚单体,自制的端羟基季铵盐为阳离子扩链剂,利用亚硫酸氢钠对异氰酸酯基封端处理后对体系进行去离子水分散乳化,合成了一种反应型阳离子水性聚氨酯（WPU）固色剂,考察了预聚反应温度、nNCO／nOH比值以及扩链剂用量对阳离子WPU性能的影响。结果表明,当预聚反应nNCO／nOH比值为2．0、温度70℃,季铵盐扩链剂质量分数为9％（相对于预聚物）时,合成阳离子WPU性能较好;将其用于活性染料或直接染料染色棉织物的固色处理,耐皂洗牢度及耐摩擦色牢度效果良好,其中湿摩擦牢度能够达到4级。     

Telechelic PEG-polymers end-capped with chromophores: Using as cationic reactive dyes and salt-free dyeing properties on cotton fabrics

In this article, telechelic polymers containing polyethylene glycol (PEG) moieties as space groups were combined with chromophores to synthesize cationic reactive dyes (BCD-R, BCD-Y, and BCD-B). The salt-free dyeing performance of these telechelic polymeric cationic reactive dyes on cotton fabrics was evaluated. The exhaustion and fixation of the dyes in salt-free dyeing was above 89.33 and 77.22%, respectively. The color fastness of dry rubbing for the three dyes reached grade 4–5, and their color fastness to light reached grade 5–6. Their washing fastness also reached grade 4–5, except for that of BCD-Y (grade 3–4). The results showed that the dyes possessed good leveling and build-up properties and substantivity to cellulose fiber. The zeta potential (ξ-potential) of dyed fabric was estimated, and it was found that the ξ-potential of the fabrics increased after dying with telechelic polymeric cationic reactive dyes, and the more dye that was used, the greater ξ-potential increase. The exhaustion curves of dyes were also determined, and they were much different from those of anionic reactive dyes. The adsorption kinetics and isotherms of BCD-R were investigated. It was found that the pseudo-second-order kinetic model gave the best fit of the experimental data at all three tested dyeing temperatures (25, 45, and 65°C) with R² values over 0.998. Both the Langmuir and Freundlich models could be used to describe the adsorption of BCD-R onto cellulose fibers and the Langmuir model fit the experimental data better than the Freundlich model. The thermodynamic parameters (ΔG, ΔS, ΔH, and activation energy) of the dye adsorption process were researched further. The results indicated that the adsorption of BCD-R onto cotton fibers was spontaneous and exothermic and that after adsorption onto the cotton fibers, the degree of freedom of the dye decreased.     

Application of polycarboxylic acid sodium salt in the dyeing of cotton fabric with reactive dyes

In this study, the effects of polycarboxylic acid sodium salt on the dyeing of cotton with reactive dyes were evaluated by measuring and comparing the K/S values and dyeing fastnesses of the dyed cotton fabric samples. Results showed that the K/S value and dyeing fastness of cotton fabrics dyed with polycarboxylic acid sodium salt, substituting inorganic salts as exhausting agent were close to that of with sodium chloride when dip‐dyeing process was used. While, in pad‐dry dyeing, the K/S value of cotton fabric samples dyed with polyacid salts as exhausting agent was higher than that of with sodium sulfate, and the dyeing fastnesses of these samples were nearly the same. The dyeing mechanism of cotton fabric with reactive dye, using polycarboxylic acid sodium salt as exhausting agent was analyzed. The dyeing exhausting mechanism of reactive dye seems different when the inorganic salt and polycarboxylic acid sodium salt were used as exhausting agent in the dyeing of cotton fabric with reactive dye. The polycarboxylic acid sodium salt, as weak electrolyte, increased the dye‐uptake of reactive dye on cotton fabric not only by screening negative charges on cotton surface, but also by the effect of salting‐out or hydrophobic combination. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

棉织物活性染料无盐、无碱染色工艺研究

本文从棉织物阳离子改性和Argazol NF系列活性染料应用两方面考虑,实现棉织物活性染料的无盐、无碱清洁染色.改性条件为阳离子改性剂用量7％,80℃,10分钟.改性后的棉织物用Argazol NF系列活性染料染色,该清洁染色工艺条件为80℃,90分钟.