A viewing‐angle‐controllable blue‐phase liquid‐crystal display

Abstract— A viewing‐angle‐controllable liquid‐crystal display (LCD) is proposed. When the device is only driven by an in‐plane electric field, it exhibits a wide‐viewing‐angle (WVA) mode. And it exhibits narrow‐viewing‐angle (NVA) mode when it is driven by a vertical electric field as well as an in‐plane electric field. In this manner, the viewing angle of the device can be controlled from 100° to 30°. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

A continuous‐viewing‐angle‐controllable liquid‐crystal display using a blue‐phase liquid crystal

Abstract— A continuous‐viewing‐angle‐controllable liquid‐crystal display (LCD) using a blue‐phase liquid crystal is proposed. To realize both wide‐viewing‐angle (WVA) mode and narrow‐viewing‐angle (NVA) mode with a single liquid‐crystal panel, each pixel is divided into a main pixel and a subpixel. The main pixel is for displaying images in both modes. The subpixel is for displaying images in WVA mode and controlling the viewing angle in NVA mode. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

Transflective blue‐phase liquid‐crystal display with corrugated electrode structure

Abstract— A transflective polymer‐stabilized blue‐phase liquid‐crystal display (BP‐LCD) with a corrugated electrode structure is proposed. To balance the optical phase retardation between the transmissive (T) and reflective (R) regions, two device structures are proposed. The first device structure has the same inclination angles but different cell gaps in the T and R regions. And the second device structure has the same cell gap but different inclination angles in the T and R regions. Both of the device structures can obtain well‐matched VT and VR curves. This display exhibits low operating voltage, high optical efficiency, and a wide viewing angle.     

A single‐cell‐gap transflective liquid‐crystal display using different pretilt angles in transmissive and reflective regions

Abstract— A single‐cel l‐gap transflective liquid‐crystal display with two types of liquid‐crystal alignment based on an in‐plane‐switching structure is proposed. The transmissive region is almost homeotropically aligned with the rubbed surfaces at parallel directions while the reflective region has a homeotropic liquid‐crystal alignment. For every driving voltage for a positive‐dielectric‐anisotropy nematic liquid crystal, the effective cell‐retardation value in the transmissive region becomes larger than that in the reflective region because of optical compensation film which is generated by low‐pretilt‐angle liquid crystal in the transmissive region. Under the optimization of the liquid‐crystal cell and alignment used in the transmissive and reflective areas, the transmissive and reflective parts have similar gamma curves. An identical response time in both the transmissive and reflective regions and a desirable viewing angle for personal portable displays can also be obtained.     

Large‐area black/white bistable cholesteric liquid‐crystal display and the thermal‐addressing system

Abstract— A 3‐m‐length black/white bistable cholesteric liquid‐crystal display was made by a roll‐to‐roll process and the display area is 25 × 300 cm. The black/white performance was made by black nano‐pigment and blended ChLC droplets with different wavelengths. It was written by a thermal‐addressing system, realizing high resolution and low cost.     

A single‐cell‐gap transflective liquid‐crystal display with special electrodes

Abstract— A single‐cell‐gap transflective liquid‐crystal display with special electrodes was demonstrated. In the transmissive region, a strong longitudinal electric field was generated by decreasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes; while in the reflective region, a weak longitudinal electric field is generated by increasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes. And slit‐patterned electrodes were used to optimize the fringe field at the junction of the transmissive and reflective regions. As a result, both the transmissive and reflective display modes show well‐matched gray scales. The simulated single‐cell‐gap TR‐LCD has good performances.     

Bistable SmA liquid‐crystal display driven by a two‐direction electric field

Abstract— A new operation mode of a bistable smectic A (SmA) display using two sets of electrodes, one without specific features to induce homeotropic orientation of the director and the other with an in‐plane pattern to induce planar orientation of the director, has been demonstrated. Both statements of the director orientation are the stable states of SmA liquid crystals. Compared with the electrical addressing mode of a conventional SmA display, the SmA display mode presented in this study exhibits a high contrast ratio, excellent bistability, and reasonably fast switching under the employment of two crossed polarizers. Moreover, gray level can be achieved by regulating the frequency, owing to the formation of the focal‐conic defect. This operation mode of a bistable SmA device demonstrated great potential for the further application in flexible displays.     

Ferroelectric nanoparticle/liquid‐crystal colloids for display applications

Abstract— A non‐synthetic approach to modify liquid crystals (LCs) by dispersing low concentrations of ferroelectric nanoparticles is reported. These dilute colloids are stable and appear similar to a pure LC. However, by changing the concentration and the type of ferroelectric particles, the physical properties of the LC materials can be tailored, including the nematic isotropic transition temperature (T_NI), the dielectric constants, the birefringence (Δn), elastic constants, and the threshold voltage. Specifically, doping low concentrations of BaTiO₃ nanoparticles (～1%) into a LC MLC‐6609 increases T_NI up to ～40°C. This giant shift of T_NI has never been previously reported and indicates strong interactions between the LC and ferroelectric nanoparticles on a molecular level. The doped LC also demonstrates significant enhancement in birefringence (by 10–30%), dielectric anisotropy (by ～50%), and the elastic constant K₃₃ (by ～20%). Ferroparticles act as molecular additives and modify the intrinsic properties of LC materials without time consuming and expensive chemical synthesis. The new LC materials are very attractive and suitable for use in displays, switchable lenses, beam steering, as well as other light‐controlling devices.     

A dual‐cell‐gap transflective liquid‐crystal display with identical response time in transmissive and reflective regions

Abstract— A dual‐cell‐gap transflective liquid‐crystal display (TR‐LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR‐LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro‐optic characteristics of the TR‐LCD was calculated. The simulated dual‐cell‐gap TR‐LCD demonstrated good performances.     

Ultra‐fast‐switching flexoelectric liquid‐crystal display with high contrast

Abstract— The flexoelectro‐optic effect provides a fast‐switching mechanism (0.01–0.1 msec), suitable for use in field‐sequential‐color full‐motion‐video displays. An in‐plane electric field is applied to a short‐pitch chiral nematic liquid crystal aligned in the uniform standing helix (or Grandjean) texture. The switching mechanism is experimentally demonstrated in a single‐pixel test cell, and the display performance is investigated as a function of device parameters. A contrast ratio of 2000:1 is predicted.     

Advanced liquid‐crystal materials for TFT monitor and TV applications

Notebook applications have been one of the most important driving forces behind the remarkable growth of liquid‐crystal displays (LCDs). LCDs have recently been well accepted in the monitor market and large growth is forecasted because of the replacement of CRTs. The next challenge for LCDs is the TV market. These new application areas are supported by advanced LC technologies such as film‐compensated twisted nematic (TN), in‐plane switching (IPS), and vertically aligned (VA) modes. Each TFT technology requires a corresponding LC material improvement. We will review the recent liquid‐crystal material development for these advanced LC technologies.     

A rugged display: Recent results of flexible cholesteric liquid‐crystal displays

Abstract— A 3‐m‐long rugged flexible display having a novel single‐plastic‐substrate structure has been demonstrated with a coated cholesteric liquid‐crystal mixture. The display is designed to be fabricated by a roll‐to‐roll process to increase productivity at a competitive cost. It has the advantage of having almost no limitation in display length. The high‐resolution (300‐dpi) monochrome cholesteric liquid‐crystal display (ChLCD) can be achieved by using a photo‐addressing method. A single‐layered 10.4‐in. color ChLCD also has been developed with good color and contrast.     

Performance of liquid‐crystal displays for fire‐service thermal‐imaging cameras

Abstract— As use of handheld thermal‐imaging cameras (TICs) becomes more prevalent in the first‐responder community, it is important that standard test metrics be available to characterize imaging performance. A key performance consideration is the quality of the image presented on the TIC display. This paper focuses on TICs that use liquid‐crystal displays to render an image for the user. Current research on TIC performance for first‐responder applications makes use of trained observers and/or composite‐video‐output‐signal measurements. Trained observer tests are subjective and composite video output tests do not evaluate the performance of the complete imaging system. A non‐destructive objective method was developed that tests the performance of the entire thermal‐imaging system, from the infrared sensor to the display. A thermal target was used to correlate the measured thermal imager composite video output signal with the luminance of the display. A well‐characterized charge‐coupled‐device (CCD) camera and digital recording device were used to measure the display luminance. An electro‐optical transfer function was determined that directly relates the composite video output signal to the luminance of the display, providing a realistic characterization of system performance.     

Luminescent dichroic‐dye‐doped cholesteric liquid‐crystal displays

Abstract— LCDs based on a luminescent dichroic‐dye‐doped non‐absorbing cholesteric LC with positive dielectric anisotropy is proposed. In the initial state, the orientation of the dye molecules provides effective light absorption and irradiation. By applying an electric field to the cell, the absorption and thus the luminescence is absent. A two‐color luminescence could be achieved by sandwiching two cells: the upper cell consists of a cholesteric LC with two dyes (sensitizer and emitter) and is used with an applied voltage (active cell); the lower cell consists of a cholesteric LC doped with one dye and works without applying a voltage (passive cell). The performance characteristics of luminescent dye‐doped cholesteric‐LCDs were investigated.     

High‐mobility solution‐processed organic thin‐film transistor array for active‐matrix color liquid‐crystal displays

Abstract— A solution‐processed organic thin‐film‐transistor array to drive a 5‐in.‐diagonal liquid‐crystal display has been fabricated, where semiconductor films, a gate dielectric film, and passivation films have all been formed using solution processes. A field‐effect mobility of 1.6 cm²/V‐sec, which is among the highest for solution‐processed organic thin‐film transistors ever reported, was obtained. This result is due to semiconductor material with large‐grain‐sized pentacene crystals formed from a solution and adoption of three‐layered passivation films that minimize the performance degradation of organic thin‐film transistors.     

A single‐substrate multicolor cholesteric liquid‐crystal display prepared through ink‐jet printing

Abstract— Ink‐jet printing was used to prepare a single‐substrate multicolor cholesteric liquid‐crystal (Ch‐LC) display incorporating three Ch‐LCs exhibiting different reflective wavelengths. A room‐temperature low‐vacuum chemical‐vapor‐deposition process was developed for coating a thin polymer film onto the Ch‐LC so that the top electrode could be coated onto the Ch‐LC layer. Herein, the successful operation of such a 10.4‐in. QVGA Ch‐LC display at 40 V will be described.     

Evaluation of liquid‐crystal‐display motion blur with moving‐picture response time and human perception

Abstract— The moving‐picture response time (MPRT) for measuring liquid‐crystal‐display (LCD) motion blur was studied by several organizations in 2001. To determine the LCD motion blur that humans perceive, subjective evaluation experiments using the method of adjustment was conducted to find a strong correlation between perceived motion blur and extended blurred edge time (EBET) of the MPRT measurements. MPRT thus clearly indicates the degree of which humans perceive motion blur.     

Patterned liquid‐crystal laser film for multi‐dimensional multi‐color emissive film technology

Abstract— A two‐dimensional array consisting of dye‐doped reflection‐mode holographic‐polymer‐dispersed liquid crystal (H‐PDLC) lasers with alternating pitch lengths is presented. These post structures each reflect at a narrow bandwidth of light. The addition of laser dye to the H‐PDLC system allows for the generation of laser emission at the edge of the reflection band, or photonic band gap. In patterning these H‐PDLC post structures, a narrow‐linewidth patterned emissive color film is realized. The potential of such films and their implication in the display industry is discussed. In creating a three‐color array, an active emissive color film could replace the backlight and color filter components within the display. Such a patterned system would possess a wide color gamut, through spatial color synthesis, formed by narrow‐linewidth lasing structures with well‐defined wavelengths of emission.     

Optimization of photo‐aligned ferroelectric liquid‐crystal display under passively addressed driving

Abstract— A ferroelectric liquid‐crystal (FLC) passively addressed 64 × 64 display based on the photo‐alignment technique has been developed. The display matrix has dimensions of 33 × 33 mm², and the FLC layer thickness is about 5 μm. Asymmetric boundary conditions, when only one of ITO surfaces of the display matrix is covered with the photo‐aligning layer while another one is not, have been used for providing both high contrast ratio and steady multiplex operation. The electro‐optical performance of the 5‐μm FLC display is presented, including bistable switching in static operation, optimization in multiplexing operation, and gray‐scale generation.     

A 5‐in. flexible ferroelectric liquid‐crystal display driven by organic thin‐film transistors

Abstract— An organic thin‐film‐transistor (OTFT) driven color flexible ferroelectric‐liquid‐crystal (FLC) display with 160 × 120 pixels and a resolution of 50 ppi has been developed. The flexible FLC was fabricated on a pentacene‐OTFT array using printing and lamination techniques. To drive the display at a fast driving speed, an OTFT was developed with a short channel length having a large current output. The fabricated OTFT array with a channel length of 5 μm exhibits a carrier mobility of 0.3 cm²/V‐sec and an ON/OFF ratio of over 10⁷ at a low drain voltage of ?6 V. A field‐sequential‐color system with a flexible backlight unit was also developed and used to drive the display. Color moving images were successively shown on the 5‐in. display using an active‐matrix driving technique of the OTFT.