A Novel Design Strategy for Fully Physically Linked Double Network Hydrogels with Tough,Fatigue Resistant,and Self‐Healing Properties

Double network (DN) hydrogels with two strong asymmetric networks being chemically linked have demonstrated their excellent mechanical properties as the toughest hydrogels, but chemically linked DN gels often exhibit negligible fatigue resistance and poor self‐healing property due to the irreversible chain breaks in covalent‐linked networks. Here, a new design strategy is proposed and demonstrated to improve both fatigue resistance and self‐healing property of DN gels by introducing a ductile, nonsoft gel with strong hydrophobic interactions as the second network. Based on this design strategy, a new type of fully physically cross‐linked Agar/hydrophobically associated polyacrylamide (HPAAm) DN gels are synthesized by a simple one‐pot method. Agar/HPAAm DN gels exhibit excellent mechanical strength and high toughness, comparable to the reported DN gels. More importantly, because the ductile and tough second network of HPAAm can bear stress and reconstruct network structure, Agar/HPAAm DN gels also demonstrate rapid self‐recovery, remarkable fatigue resistance, and notable self‐healing property without any external stimuli at room temperature. In contrast to the former DN gels in both network structures and underlying association forces, this new design strategy to prepare highly mechanical DN gels provides a new avenue to better understand the fundamental structure‐property relationship of DN hydrogels, thus broadening current hydrogel research and applications.     

Hofmeister Effect‐Assisted One Step Fabrication of Ductile and Strong Gelatin Hydrogels

Hydrogels with high strength and ductility are normally prepared from synthetic polymers, and most protein‐based hydrogels are soft and brittle. Here, a strong, ductile gelatin hydrogel is prepared by simply soaking a virgin gelatin gel in an ammonium sulfate solution. The polymer chains in the covalent, crosslink‐free network can freely move to homogeneously distribute stress, and more importantly, the highly kosmotropic ammonium sulfate ions greatly enhance the hydrophobic interactions and chain bundling within the gelatin gels. As a result, the treated hydrogels have an extraordinary ultimate strength (compressive and tensile strains of over 99% and 500%, respectively, and stresses of 12 and 3 MPa) superior to that of common protein gels. The physical crosslinks introduced by the Hofmeister effect can rapidly absorb energy and sustain large deformations via decrosslinking and dissociation, which result in energy dissipation and antifatigue properties. The effects of the gelatin and (NH₄)₂SO₄ concentrations on the hydrogel mechanics are evaluated, and the possible strengthening mechanism is discussed. The effect of various ions in the Hofmeister series on the gelatin hydrogel is also investigated. Kosmotropic ions enhance the mechanical properties, whereas chaotropic ions soften and dissolve the gel.     

3D Printing of a Biocompatible Double Network Elastomer with Digital Control of Mechanical Properties

The majority of 3D‐printed biodegradable biomaterials are brittle, limiting their application to compliant tissues. Poly(glycerol sebacate) acrylate (PGSA) is a synthetic biocompatible elastomer and compatible with light‐based 3D printing. In this article, digital‐light‐processing (DLP)‐based 3D printing is employed to create a complex PGSA network structure. Nature‐inspired double network (DN) structures consisting of interconnected segments with different mechanical properties are printed from the same material in a single shot. Such capability has not been demonstrated by any other fabrication techniques so far. The biocompatibility of PGSA is confirmed via cell‐viability analysis. Furthermore, a finite‐element analysis (FEA) model is used to predict the failure of the DN structure under uniaxial tension. FEA confirms that the DN structure absorbs 100% more energy before rupture by using the soft segments as sacrificial elements while the hard segments retain structural integrity. Using the FEA‐informed design, a new DN structure is printed and tensile test results agree with the simulation. This article demonstrates how geometrically‐optimized material design can be easily and rapidly constructed by DLP‐based 3D printing, where well‐defined patterns of different stiffnesses can be simultaneously formed using the same elastic biomaterial, and overall mechanical properties can be specifically optimized for different biomedical applications.     

Tough and Stretchable Phenolic-Reinforced Double Network Deep Eutectic Solvent gels for Multifunctional Sensors with Environmental Adaptability

Conductive gels are perfect for various sensor applications due to their inherent stretchability, flexibility, and electrical conductivity. However, their poor environmental adaptability and low fracture toughness restrict their potential applications. In this study, resorcinol-formaldehyde resin (RF) is used for the first time as a rigid network compounded with a flexible polyacrylic acid (PAA) network to successfully prepare a double network (DN) deep eutectic solvent gel (RF/PAA DN gel). The gel has high stress strength (1.04 MPa), compressive strength (10.63 MPa), and toughness (1.07 MJ m⁻³). The addition of RF significantly improves the mechanical properties and gives the RF/PAA DN gel certain photothermal effects, swelling resistance, and flame retardancy, broadening the scope of use and application of the gel. Importantly, as a multifunctional sensor, it can combine deformation sensing, temperature sensing, optical sensing, humidity sensing, and underwater sensing into one, with a wide range of stimuli responses and excellent sensing properties. Excellent environmental suitability also allows its use in a wide range of temperatures (−20−90 °C), humidity (55%−90% RH), underwater, and in fire conditions. The work provides new ideas for choosing rigid networks and a novel strategy for developing multifunctional sensors with excellent performance in complex environments.     

Tough Hydrogels with Programmable and Complex Shape Deformations by Ion Dip‐Dyeing and Transfer Printing

Stimuli‐responsive hydrogels with high mechanical strength, programmable deformation, and simple preparation are essential for their practical applications. Here the preparation of tough hydrogels with programmable and complex shape deformations is reported. Janus hydrogels with different compositions and hydrophilic natures on the two surfaces are first prepared, and they exhibit reversible bending/unbending upon swelling/deswelling processes. More impressively, the deformation rate and extent of the hydrogels can further be easily controlled through an extremely simple and versatile ion dip‐dyeing (IDD) and/or ion transfer printing (ITP) method. By selectively printing proper patterns on 1D gel strips, 2D gel sheets and 3D gel structures, the transformations from 1D to 2D, 2D to 3D, and 3D to more complicated 3D shapes can be achieved after swelling the ion‐patterned hydrogels in water. The swelling‐deformable Janus and ion‐patterned hydrogels with high mechanical strengths and programmable deformations can find many practical applications, such as soft machines.     

Anisotropic Hybrid Hydrogels with Superior Mechanical Properties Reminiscent of Tendons or Ligaments

Mimicking the hierarchically anisotropic structure and excellent mechanical properties of natural tissues, such as tendons and ligaments, using biomaterials is challenging. Despite recent achievements with anisotropic hydrogels, limitations remain because of difficulties in achieving both structural and mechanical characteristics simultaneously. A simple approach for fabricating hybrid hydrogels with a hierarchically anisotropic structure and superior mechanical properties that are reminiscent of tendons or ligaments is proposed. Alginate–polyacrylamide double‐network (DN) hydrogels incorporated with high aspect ratio mesoporous silica microparticles are stretched and fixed via subsequent drying and ionic crosslinking to achieve multiscale structures composed of an anisotropically aligned polymer network embedded with aligned microparticles. The mechanical properties of hydrogels can be further controlled by the degree of stretching, quantities, and functional groups of inorganic microparticles, and types of crosslinking cations. The subsequent reswelling results in a high water content (>80%) similar to that of natural tendons while high strength, modulus, and toughness are maintained. The optimized anisotropic hybrid hydrogel exhibits a tensile modulus of 7.2 MPa, strength of 1.3 MPa, and toughness of 1.4 MJ m^?3 even in the swollen state, which is 451‐, 27‐, and 2.2 times higher than that observed in the non‐swollen tough DN hydrogel. This study suggests a new strategy for fabricating anisotropic hydrogels with superior mechanical properties to develop new biomaterials for artificial tendons or ligaments.     

A Universal Molecular Stent Method to Toughen any Hydrogels Based on Double Network Concept

Double‐network hydrogels (DN gels), despite their high water content, are the strongest and toughest soft and wet materials available. However, in conventional DN gels, which show extraordinarily high mechanical performance comparable to that of industrial rubbers, the first network must be a strong polyelectrolyte and this requirement greatly hinders the widespread application of these gels. A general method involving the use of a “molecular stent” for the synthesis of tough DN gels using any hydrophilic polymer as the first network is reported. This is the first reported method for the synthesis of tough DN gels using various neutral or weak polyelectrolyte hydrogels as the first network. This method helps extend the DN gel concept to various functional polymers and may increase the number of applications of hydrogels in various fields.     

Synthesis and Characterization of Gelatin‐Based Magnetic Hydrogels

A simple preparation of thermoreversible gelatin‐based ferrogels in water provides a constant structure defined by the crosslinking degree for gelatin contents between 6 and 18 wt%. The possibility of varying magnetite nanoparticle concentration between 20 and 70 wt% is also reported. Simulation studies hint at the suitability of collagen to bind iron and hydroxide ions, suggesting that collagen acts as a nucleation seed to iron hydroxide aggregation, and thus the intergrowth of collagen and magnetite nanoparticles already at the precursor stage. The detailed structure of the individual ferrogel components is characterized by small‐angle neutron scattering (SANS) using contrast matching. The magnetite structure characterization is supplemented by small‐angle X‐ray scattering and microscopy only visualizing magnetite. SANS shows an unchanged gelatin structure of average mesh size larger than the nanoparticles with respect to gel concentration while the magnetite nanoparticles size of around 10 nm seems to be limited by the gel mesh size. Swelling measurements underline that magnetite acts as additional crosslinker and therefore varying the magnetic and mechanical properties of the ferrogels. Overall, the simple and variable synthesis protocol, the cheap and easy accessibility of the components as well as the biocompatibility of the gelatin‐based materials suggest them for a number of applications including actuators.     

A Synthetic Hydrogel Composite with the Mechanical Behavior and Durability of Cartilage

This article reports the first hydrogel with the strength and modulus of cartilage in both tension and compression, and the first to exhibit cartilage‐equivalent tensile fatigue strength at 100 000 cycles. These properties are achieved by infiltrating a bacterial cellulose (BC) nanofiber network with a poly(vinyl alcohol) (PVA)–poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid sodium salt) (PAMPS) double network hydrogel. The BC provides tensile strength in a manner analogous to collagen in cartilage, while the PAMPS provides a fixed negative charge and osmotic restoring force similar to the role of aggrecan in cartilage. The hydrogel has the same aggregate modulus and permeability as cartilage, resulting in the same time‐dependent deformation under confined compression. The hydrogel is not cytotoxic, has a coefficient of friction 45% lower than cartilage, and is 4.4 times more wear‐resistant than a PVA hydrogel. The properties of this hydrogel make it an excellent candidate material for replacement of damaged cartilage.     

Transparent,Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

Cellulose nanofibrils are attractive as building blocks for advanced photonic, optoelectronic, microfluidic, and bio‐based devices ranging from transistors and solar cells to fluidic and biocompatible injectable devices. For the first time, an ultrastrong and ultratough cellulose film, which is composed of densely packed bacterial cellulose (BC) nanofibrils with hierarchical fibril alignments, is successfully demonstrated. The molecular level alignment stems from the intrinsic parallel orientation of crystalline cellulose molecules produced by Acetobacter xylinum. These aligned long‐chain cellulose molecules form subfibrils with a diameter of 2–4 nm, which are further aligned to form nanofibril bundles. The BC film yields a record‐high tensile strength (≈1.0 GPa) and toughness (≈25 MJ m^?3). Being ultrastrong and ultratough, yet the BC film is also highly flexible and can be folded into desirable shapes. The BC film exhibits a controllable manner of alignment and is highly transparent with modulated optical properties, paving the way to enabling new functionalities in mechanical, electrical, fluidic, photonics, and biocompatible applications.     

Injectable and Tunable Gelatin Hydrogels Enhance Stem Cell Retention and Improve Cutaneous Wound Healing

Stem cells have shown substantial promise for various diseases in preclinical and clinical trials. However, low cell engraftment rates significantly limit the clinical translation of stem cell therapeutics. Numerous injectable hydrogels have been developed to enhance cell retention. Yet, the design of an ideal material with tunable properties that can mimic different tissue niches and regulate stem cell behaviors remains an unfulfilled promise. Here, an injectable poly(ethylene glycol) (PEG)–gelatin hydrogel is designed with highly tunable properties, from a multifunctional PEG‐based hyperbranched polymer and a commercially available thiolated gelatin. Spontaneous gelation occurs within about 2 min under the physiological condition. Murine adipose‐derived stem cells (ASCs) can be easily encapsulated into the hydrogel, which supports ASC growth and maintains their stemness. The hydrogel mechanical properties, biodegradability, and cellular responses can be finely controlled by changing hydrogel formulation and cell seeding densities. An animal study shows that the in situ formed hydrogel significantly improves cell retention, enhances angiogenesis, and accelerates wound closure using a murine wound healing model. These data suggest that injectable PEG–gelatin hydrogel can be used for regulating stem cell behaviors in 3D culture, delivering cells for wound healing and other tissue regeneration applications.     

Covalent Poly(2‐Isopropenyl‐2‐Oxazoline) Hydrogels with Ultrahigh Mechanical Strength and Toughness through Secondary Terpyridine Metal‐Coordination Crosslinks

The present study reports the synthesis of poly(2‐isopropenyl‐2‐oxazoline) (PiPOx) dual‐crosslinked hydrogels by both covalent and physical (i.e., metal–ligand coordination) interactions. First, chemical crosslinking of a modified PiPOx polymer containing terpyridine (TPy) unit is achieved by reacting with azelaic acid (non‐anedioic acid). Transient crosslinks are subsequently introduced by complexation of the TPy units with different divalent transition metal ions. This strategy provides access to hydrogels with superior mechanical properties compared to the pure covalently crosslinked PiPOx hydrogels. The mechanical properties and water uptake of the hydrogels could be easily controlled by swelling in different aqueous metal ion solutions. PiPOx hydrogels swollen in Zn²⁺ solution are found to possess ultrahigh compression strength (9 MPa), remarkable toughness (99 MJ m^?3) and outstanding self‐recoverability (98% toughness recovery after swelling for 60 min without external stimuli), which are among the highest reported in literature to date. These remarkable properties are assigned to the thermodynamically stable, but kinetically labile Zn²⁺‐TPy complexes that produce a dynamic network with fewer imperfections and better adaptive properties under mechanical stress compared to those with other metal ions.     

Superplastic Air‐Dryable Graphene Hydrogels for Wet‐Press Assembly of Ultrastrong Superelastic Aerogels with Infinite Macroscale

Highly compressible graphene‐based monoliths with excellent mechanical, electrical, and thermal properties hold great potential as multifunctional structural materials to realize the targets of energy‐efficiency, comfort, and safety for buildings, vehicles, aircrafts, etc. Unfortunately, the ultralow mechanical strength and limited macroscale have hampered their practical applications. Herein, ultrastrong superelastic graphene aerogel with infinite macroscale is obtained by a facile wet‐press assembly strategy based on the novel superplastic air‐dryable graphene hydrogel (SAGH). The SAGH with isotropic, open‐cell, and highly porous microstructure is carefully designed by a dual‐template sol–gel method. Countless SAGH “bricks” can be assembled together orderly by press to form the strongly combined wet‐press assembled graphene aerogel (WAGA) “wall” after air‐drying. The WAGA with highly oriented, dense, multiple‐arch microstructure possesses arbitrary macroscale, outstanding compressive strength (47 MPa, over 10 times higher than the best ever reported), super elasticity (>97% strain), and high conductivity (378 S m^?1). The strong adhesion is attributed to the tightly face‐to‐face contacted graphene interfaces caused by wet‐press and air‐drying. The WAGAs prove to be excellent multifunctional structural materials in the fields of high pressure/strain sensor, tunable mechanical energy absorber, high‐performance fire‐resistance, and thermal insulation. This facile strategy is easily extended to fabricate other similar metamaterials.     

Physical Double‐Network Hydrogel Adhesives with Rapid Shape Adaptability,Fast Self‐Healing,Antioxidant and NIR/pH Stimulus‐Responsiveness for Multidrug‐Resistant Bacterial Infection and Removable Wound Dressing

Developing physical double‐network (DN) removable hydrogel adhesives with both high healing efficiency and photothermal antibacterial activities to cope with multidrug‐resistant bacterial infection, wound closure, and wound healing remains an ongoing challenge. An injectable physical DN self‐healing hydrogel adhesive under physiological conditions is designed to treat multidrug‐resistant bacteria infection and full‐thickness skin incision/defect repair. The hydrogel adhesive consists of catechol–Fe³⁺ coordination cross‐linked poly(glycerol sebacate)‐co‐poly(ethylene glycol)‐g‐catechol and quadruple hydrogen bonding cross‐linked ureido‐pyrimidinone modified gelatin. It possesses excellent anti‐oxidation, NIR/pH responsiveness, and shape adaptation. Additionally, the hydrogel presents rapid self‐healing, good tissue adhesion, degradability, photothermal antibacterial activity, and NIR irradiation and/or acidic solution washing‐assisted removability. In vivo experiments prove that the hydrogels have good hemostasis of skin trauma and high killing ratio for methicillin‐resistant staphylococcus aureus (MRSA) and achieve better wound closure and healing of skin incision than medical glue and surgical suture. In particular, they can significantly promote full‐thickness skin defect wound healing by regulating inflammation, accelerating collagen deposition, promoting granulation tissue formation, and vascularization. These on‐demand dissolvable and antioxidant physical double‐network hydrogel adhesives are excellent multifunctional dressings for treating in vivo MRSA infection, wound closure, and wound healing.     

Biofabricating Multifunctional Soft Matter with Enzymes and Stimuli‐Responsive Materials

Methods that allow soft matter to be fabricated with controlled structure and function would be beneficial for applications ranging from flexible electronics to regenerative medicine. Here, the assembly of a multifunctional gelatin matrix is demonstrated by triggering its self‐assembly and then enzymatically assembling biological functionality. Triggered self‐assembly relies on electrodeposition of the pH‐responsive hydrogelator, 9‐fluorenylmethoxycarbonyl‐phenylalanine (Fmoc‐Phe), in response to electrical inputs that generate a localized pH‐gradient. Warm solutions of Fmoc‐Phe and gelatin are co‐deposited and, after cooling to room temperature, a physical gelatin network forms. Enzymatic assembly employs the cofactor‐independent enzyme microbial transglutaminase (mTG) to perform two functions: crosslink the gelatin matrix to generate a thermally stable chemical gel and conjugate proteins to the matrix. To conjugate globular proteins to gelatin these proteins are engineered to have short lysine‐rich or glutamine‐rich fusion tags to provide accessible residues for mTG‐catalysis. Viable bacteria can be co‐deposited and entrapped within the crosslinked gelatin matrix and can proliferate upon subsequent incubation. These results demonstrate the potential for enlisting biological materials and mechanisms to biofabricate multifunctional soft matter.     

Engineering Platelet-Rich Plasma Based Dual-Network Hydrogel as a Bioactive Wound Dressing with Potential Clinical Translational Value

Delayed wound healing has a profound impact on patients, healthcare, and society. Platelet-rich plasma (PRP) gel, as a preparation for regenerative medicine, has proven to be of clinical value in various wound treatments. Nevertheless, its weak mechanical properties and consequent burst release effect have restricted its application and efficacy. Here, an engineered PRP dual-network hydrogel (named DN gel) based on sodium alginate is constructed through a simple “one-step” activation process. Its improved gelling property and sustained release of growth factors may be beneficial for clinical use. Evaluations in rats indicate that DN gel promote wound healing in terms of rapid re-epithelialization, up-regulated growth factor levels and early transitions in the wound healing and angiogenesis stages. As a proof of concept, DN gel also exhibits superior healing efficiency in a porcine wound model. These results demonstrate the great potential of transforming this hydrogel into the next generation of PRP-based bioactive wound dressing.     

Highly Stretchable,Elastic, and Ionic Conductive Hydrogel for Artificial Soft Electronics

High conductivity, large mechanical strength, and elongation are important parameters for soft electronic applications. However, it is difficult to find a material with balanced electronic and mechanical performance. Here, a simple method is developed to introduce ion‐rich pores into strong hydrogel matrix and fabricate a novel ionic conductive hydrogel with a high level of electronic and mechanical properties. The proposed ionic conductive hydrogel is achieved by physically cross‐linking the tough biocompatible polyvinyl alcohol (PVA) gel as the matrix and embedding hydroxypropyl cellulose (HPC) biopolymer fibers inside matrix followed by salt solution soaking. The wrinkle and dense structure induced by salting in PVA matrix provides large stress (1.3 MPa) and strain (975%). The well‐distributed porous structure as well as ion migration–facilitated ion‐rich environment generated by embedded HPC fibers dramatically enhances ionic conductivity (up to 3.4 S m^?1, at f = 1 MHz). The conductive hybrid hydrogel can work as an artificial nerve in a 3D printed robotic hand, allowing passing of stable and tunable electrical signals and full recovery under robotic hand finger movements. This natural rubber‐like ionic conductive hydrogel has a promising application in artificial flexible electronics.     

Self‐Assembly of Mechanoplasmonic Bacterial Cellulose–Metal Nanoparticle Composites

Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC–NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self‐assembly strategy is described for fabrication of complex and well‐defined BC–NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self‐assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near‐field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies.     

Layered Gradient Nonwovens of In Situ Crosslinked Electrospun Collagenous Nanofibers Used as Modular Scaffold Systems for Soft Tissue Regeneration

In a versatile modular scaffold system, gradient nonwovens of in situ crosslinked gelatin nanofibers (CGN), fabricated by reactive electrospinning, are laminated with perforated layers and nonwovens of thermoplastic non‐crosslinked biodegradable polyesters. The addition of glyoxal to a gelatin solution in a non‐toxic solvent mixture consisting of acetic acid, ethyl acetate, and water (5:3:2 w/w/w) enables the in situ crosslinking of gelatin nanofibers during electrospinning. The use of this fluorine‐free crosslinking system eliminates the need of post‐treatment crosslinking and purification steps typical for conventional CGN scaffolds. The slowly progressing crosslinking of the dissolved gelatin in the presence of glyoxal increases the viscosity of the gelatin solution during electrospinning so that the average diameter of the crosslinked gelatin nanofibers gradually increases from 90 to 680 nm. During the subsequent lamination process, alternating layers of CGN and polycaprolactone (PCL) nonwovens, produced by 3D microextrusion of micrometer‐sized PCL fibers, are bonded together upon heating above the PCL melting temperature. In contrast to the water‐soluble gelatin nanofibers and the comparatively weak CGN, the CGN/PCL/CGN layered biocomposites are water‐resistant and very robust. In such modular scaffold systems, strength, biodegradation rate, and biological functions can be controlled by varying the type, composition, fiber diameter, porosity, number, and sequence of the individual layers. The CGN/PCL multilayer biocomposites can be cut into any desired scaffold shape and attached to tissue by surgical sutures in order to suit the needs of individual patients.     

Amine‐Functionalized Boron Nitride Nanosheets: A New Functional Additive for Robust,Flexible Ion Gel Electrolyte with High Lithium‐Ion Transference Number

Ion gel electrolytes show great potential in solid‐state batteries attributed to their outstanding characteristics. However, because of the strong ionic nature of ionic liquids, ion gel electrolytes generally exhibit low lithium‐ion transference number, limiting its practical application. Amine‐functionalized boron nitride (BN) nanosheets (AFBNNSs) are used as an additive into ion gel electrolytes for improving their ion transport properties. The AFBNNSs‐ion gel shows much improved mechanical strength and thermal stability. The lithium‐ion transference number is increased from 0.12 to 0.23 due to AFBNNS addition. More importantly, for the first time, nuclear magnetic resonance analysis reveals that the amine groups on the BN nanosheets have strong interaction with the bis(trifluoromethanesulfonyl)imide anions, which significantly reduces the anion mobility and consequently increases lithium‐ion mobility. Battery cells using the optimized AFBNNSs‐ion gel electrolyte exhibit stable lithium deposition and excellent electrochemical performance. A LiFePO₄|Li cell retains 92.2% of its initial specific capacity after the 60th cycle while the cell without AFBNNSs‐gel electrolyte only retains 53.5%. The results not only demonstrate a new strategy to improve lithium‐ion transference number in ionic liquid electrolytes, but also open up a potential avenue to achieve solid‐state lithium metal batteries with improved performance.