Passive‐matrix‐driven field‐sequential‐color displays

Abstract— Passive‐matrix‐driven field‐sequential‐color (FSC) displays were successfully fabricated. It makes use of a new multiplex driving scheme that does not depend on voltage averaging. Instead, a transient response of the liquid crystal is employed. An addressing and response time of less than 70 μsec and 2.0 msec, respectively, are used. Scanning time compensation is also introduced to improve the brightness uniformity of the display.     

State‐of‐the‐Art in GPU‐Based Large‐Scale Volume Visualization

This survey gives an overview of the current state of the art in GPU techniques for interactive large‐scale volume visualization. Modern techniques in this field have brought about a sea change in how interactive visualization and analysis of giga‐, tera‐ and petabytes of volume data can be enabled on GPUs. In addition to combining the parallel processing power of GPUs with out‐of‐core methods and data streaming, a major enabler for interactivity is making both the computational and the visualization effort proportional to the amount and resolution of data that is actually visible on screen, i.e. ‘output‐sensitive’ algorithms and system designs. This leads to recent output‐sensitive approaches that are ‘ray‐guided’, ‘visualization‐driven’ or ‘display‐aware’. In this survey, we focus on these characteristics and propose a new categorization of GPU‐based large‐scale volume visualization techniques based on the notions of actual output‐resolution visibility and the current working set of volume bricks—the current subset of data that is minimally required to produce an output image of the desired display resolution. Furthermore, we discuss the differences and similarities of different rendering and data traversal strategies in volume rendering by putting them into a common context—the notion of address translation. For our purposes here, we view parallel (distributed) visualization using clusters as an orthogonal set of techniques that we do not discuss in detail but that can be used in conjunction with what we present in this survey.     

Fault‐tolerant display image‐data‐manipulation unit for system‐on‐panel

Abstract— Bit‐partitioned and conventional shifts, as well as type transformations of multimedia data, are frequently used for display image‐processing systems. A data manipulation unit with fault‐recovery capability based on redundancies is proposed for system‐on‐panel with low processing technology yield. Utilizing data manipulations that are similar to normal shift operation, a proposed data‐manipulation unit is designed with a few additional paths added to the existing barrel shifter. The design methodologies are verified with FPGA and the performance is evaluated in terms of the advantages.     

High‐pixel‐rate grating‐light‐valve laser projector

Abstract— A high‐pixel‐rate, high‐contrast (30,000:1) wide‐color‐gamut grating‐light‐valve laser projector is reported. A new optical engine enabling high‐frame‐rate (240 Hz) scan projection is employed. Panoramic wide‐angle‐scan projection with a 64:9 aspect ratio was also developed. Speckle noise is eliminated using a simple but highly efficient technique. The optical throughput efficiency of the grating‐light‐valve laser projector is reviewed.     

Silicon‐based integrated millimeter‐wave CPW‐to‐dielectric image‐guide transition

In this article, a novel mm‐wave dielectric image‐guide (DIG) to CPW transition is proposed, fabricated, and successfully tested in the silicon technology. A DIG is implemented on high resistivity Silicon‐On‐Insulator (SOI) wafer. The image‐guide height and handle layer thickness are 500 μm and 130 μm, respectively. An Aluminum coplanar waveguide is patterned over the DIG. The measured transmission characteristics of the transition are in acceptable agreement with the simulation results. A transition (coupling) loss of about 1 dB has been achieved at 60 GHz. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:490–497, 2014.     

High‐performance OCB‐mode field‐sequential‐color LCD

Abstract— Optically compensated bend (OCB) mode is a promising technology for future high‐quality display devices due to its wide viewing angle without gray‐scale inversion and color shift, fast response time, high contrast ratio, and wide temperature range. This paper summarizes the developments of the OCB mode and the optical performance of OCB‐mode field‐sequential‐color LCD.     

A high‐aperture‐ratio and low‐crosstalk pixel structure design for in‐plane‐switching‐mode TFT‐LCDs

Abstract— The TFT‐LCD market is growing rapidly, and the replacement of CRT TV by LCD TV requires the implementation of LC modes with wide viewing angles and high brightness. The IPS mode is an excellent technology to realize wide viewing angles, but it has a low aperture ratio that has now been improved by Advanced Super‐IPS (AS‐IPS). In this paper, we propose a novel pixel structure design that not only increases the aperture ratio but also reduces the crosstalk. We have improved the current AS‐IPS aperture ratio by 1.25 times and effectively reduced the capacitive coupling ratio from 1.2% to 0.05%.     

Two‐parallax‐barriers‐based autostereoscopic liquid‐crystal display without cross‐talk

Abstract— An autostereoscopic liquid‐crystal display (LCD) consists of two parallax barriers and an LCD including a liquid‐crystal panel, and a backlight panel is proposed. Parallax barrier 1 is located between the backlight panel and the liquid‐crystal panel, and Parallax barrier 2 is located between the liquid‐crystal panel and viewers. The operation principle of the autostereoscopic display and the calculation equations for the parallax barriers are described in detail. The autostereoscopic LCD was developed and produces high‐quality stereoscopic images without cross‐talk at the optimal viewing distance and less cross‐talk than a conventional one based on one parallax barrier at other viewing distances.     

Complementary meander‐line‐inspired dielectric resonator multiple‐input‐multiple‐output antenna for dual‐band applications

The communication presents a simple dielectric resonator (DR) multiple‐input‐multiple‐output (MIMO) dual‐band antenna. It utilizes two “I”‐shaped DR elements to construct an “I”‐shaped DR array antenna (IDRAA) for MIMO applications. The ground plane of the antenna is defected by two spiral complementary meander lines and two circular ground slots. In the configuration, two “I”‐shaped DR elements are placed with a separation of 0.098λ. The antenna covers dual‐band frequency spectra from 3.46 to 5.37 GHz (43.26%) and from 5.89 to 6.49 GHz (9.7%). It ensures the C‐band downlink (3.7‐4.2 GHz), uplink (5.925‐6.425 GHz), and WiMAX (5.15‐5.35 GHz) frequency bands. Each DR element is excited with a 50‐Ω microstrip line feed with aperture‐coupling mechanism. The antenna offers very high port isolation of around 18.5 and 20 dB in the lower band and upper band, respectively. The proposed structure is suitable to operate in the MIMO system because of its very nominal envelope correlation coefficient (<0.015) and high diversity gain (>9.8). The MIMO antenna provides very good mean effective gain value (±0.35 dB) and low channel capacity loss (<0.35 bit/s/Hz) throughout the entire operating bands. Simulated and measured results are in good agreement and they approve the suitability of the proposed IDRAA for C‐band uplink and downlink applications and WiMAX band applications.     

Spatio‐temporal scanning backlight mode for field‐sequential‐color optically‐compensated‐bend liquid‐crystal display

Abstract— A spatially and temporally scanning backlight consisting of ten isolated micro‐structured light guides has been developed to be combined with a fast‐response optically‐compensated‐bend‐mode field‐sequential‐color LCD in which the liquid‐crystal cell does not contain color filters. The sequential fields of three primary colors are generated by illumination of the red‐, green‐, and blue‐light‐emitting diodes, each illuminating for one‐half of the field, resulting in a luminance of 200 cd/m² for the LCD. The effect of light leakage between the blocks in the scanning backlight in field‐sequential‐color applications was measured and will be described.     

Electro‐optical characteristics of ion‐beam‐aligned FFS‐LCDs on diamond‐like‐carbon thin film

Abstract— A fringe‐field‐switching (FFS) mode cell having LC alignment has been developed by using a non‐rubbing method, a ion‐beam‐alignment method on a‐C:H thin film, to analyze the electro‐optical characteristics of this cell. The suitable inorganic thin film for FFS‐LCDs and the alignment capabilities of nematic liquid crystal (NLC) have been studied. An excellent voltage‐transmittance (V‐T) and response‐time curve for the ion‐beam‐aligned FFS‐LCDs were observed using oblique ion‐beam exposure on DLC thin films.     

Large‐video‐display‐format conversion

Abstract— High‐quality video‐format converters apply motion estimation and motion compensation to prevent jitter resulting from picture‐rate conversion, and aliasing due to de‐interlacing, in sequences with motion. Although initially considered as too expensive, high‐quality conversion is now economically feasible, and since 1995 has been available in consumer television ICs. This paper addresses the issues in format conversion and shows recent progress, introducing a new high‐quality video‐format‐conversion IC for consumer applications.     

High‐gain magnetic‐dipole quasi‐Yagi antenna using higher‐order‐mode dielectric resonator with near‐zero‐index metamaterial

For the first time, the rectangular dielectric resonator (DR) operating in higher‐order TE_3δ1 mode is investigated and used as a magnetic‐dipole driver to design quasi‐Yagi antenna with high gain. For further enhancing the antenna gain, a near‐zero‐index (NZI) metamaterial (NZIM) is proposed instead of the traditional directors and put in the front of DR driver. It is a simple structure and composed of a set of the parallel metallic lines printed on a substrate along the end‐fire direction. Benefiting from the higher‐order mode operation of the DR and NZIM, the realized gain of the proposed antenna can reach 10.3 dBi, including the gain improvement of 2 dBi resulting from the employed NZIM. To verify the design concept, the prototype of quasi‐Yagi DR antenna with NZIM is fabricated and characterized. The measured results agree very well with the simulated results.     

Solution‐processable double‐layered ionic p‐i‐n organic light‐emitting diodes

Abstract— Solution‐processed double‐layered ionic p‐i‐n organic light‐emitting diodes (OLEDs), comprised of an emitting material layer doped with an organometallic green phosphor and a photo‐cross‐linked hole‐transporting layer doped with photo‐initiator is reported. The fabricated OLEDs were annealed using simultaneous thermal and electrical treatments to form a double‐layered ionic p‐i‐n structure. As a result, an annealed double‐layered OLED with a peak brightness over 20,000 cd/m² (20 V, 390 mA/cm²) and a peak efficiency of 15 cd/A (6 V, 210 cd/m²) was achieved.     

Non‐polar‐oriented InGaN light‐emitting diodes for liquid‐crystal‐display backlighting

Abstract— This article addresses spontaneously polarized light emission from GaN‐based light‐emitting diodes (LEDs) fabricated on electrically non‐polar crystallographic orientations and application of spontaneously polarized emission for backlighting of liquid‐crystal displays (LCDs). The first half of the article describes polarized light emission from GaN‐based LEDs and its role in solid‐state lighting technology. The second half reports on our experimental work to explore the potential of non‐polar LEDs for LCD backlighting applications. Optical transmission of non‐polar LED emission was characterized through a liquid‐crystal layer. Extinction ratios of 0.21 were measured between zero and an applied bias voltage to the liquid‐crystal cells. These extinction ratios are not particularly high yet; nevertheless, the experiment has demonstrated the potential of such non‐polar LEDs for LCD backlighting.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Defect‐free half‐V‐mode ferroelectric liquid‐crystal device

Abstract— The horizontal chevron defect found in a half‐V‐mode ferroelectric‐liquid‐crystal (HV‐FLC) device can be suppressed by lowering the FLC's total free energy. The energy levels between spontaneous polarization (PS) up and down domains were degenerated by asymmetrical‐alignment treatments. The difference in the polar surface coefficient (γ²) was the key to suppressing the alignment defect. Alignment layers with opposite surface polarities and different anchoring energies were applied to control the sign and value of γ². The asymmetric cells of PIrub ‐ PIplasma (rubbed polyimide and plasma‐treated polyimide surfaces), PVArub ‐ PIplasma (rubbed polyvinyl alcohol and plasma‐treated polyimide surfaces), and PVArub ‐ PIplasma (both rubbed PI and PVA) alignment conditions presented defect‐free alignment textures under a slow‐cooling process. Among these different alignment treatments, the PVArub ‐ PIrub treated cell demonstrated the best alignment result, benefited by the largest difference in polar surface coefficient.     

State‐of‐the‐Art Report in Web‐based Visualization

In this report, we review the current state of the art of web‐based visualization applications. Recently, an increasing number of web‐based visualization applications have emerged. This is due to the fact that new technologies offered by modern browsers greatly increased the capabilities for visualizations on the web. We first review these technical aspects that are enabling this development. This includes not only improvements for local rendering like WebGL and HTML5, but also infrastructures like grid or cloud computing platforms. Another important factor is the transfer of data between the server and the client. Therefore, we also discuss advances in this field, for example methods to reduce bandwidth requirements like compression and other optimizations such as progressive rendering and streaming. After establishing these technical foundations, we review existing web‐based visualization applications and prototypes from various application domains. Furthermore, we propose a classification of these web‐based applications based on the technologies and algorithms they employ. Finally, we also discuss promising application areas that would benefit from web‐based visualization and assess their feasibility based on the existing approaches.     

Ink‐jet‐printable phosphorescent organic light‐emitting‐diode devices

Abstract— A novel method for the fabrication of ink‐jet‐printed organic light‐emitting‐diode devices is discussed. Unlike previously reported solution‐processed OLED devices, the emissive layer of OLED devices reported here does not contain polymeric materials. The emission of the ink‐jet‐printed P²OLED (IJ‐P²OLED) device is demonstrated for the first time. It shows good color and uniform emission although it uses small‐molecule solution. Ink‐jet‐printed green P²OLED devices possess a high luminous efficiency of 22 cd/A at 2000 cd/m² and is based on phosphorescent emission. The latest solution‐processed phosphorescent OLED performance by spin‐coating is disclosed. The red P²OLED exhibits a projected LT50 of >53,000 hours with a luminous efficiency of 9 cd/A at 500 cd/m². The green P²OLED shows a projected LT50 of >52,000 hours with a luminous efficiency of 35 cd/A at 1000 cd/m². Also discussed is a newly developed sky‐blue P²OLED with a projected LT50 of >3000 hour and a luminous efficiency of 18 cd/A at 500 cd/m².     

High‐Xe‐content high‐efficacy PDPs

Abstract— The trade‐off between PDP efficacy improvement and driving voltages was investigated for several design factors. It was found that for a proper combination of an increased Xe content, cell design, and the use of a TiO₂ layer combined with “non‐saturating” phosphors, a large increase in both efficacy and luminance can be realized at moderately increased drive voltages. In a 4‐in. color test panel, a white efficacy of 5 lm/W and a luminance of 5000 cd/m² was obtained for sustaining at 260 V in addressed condition.