用∑WESH图评价某涂料化工厂的可持续性

介绍了在清洁生产过程中用∑WESH图评价涂料化工厂的可持续发展的原理及方法,并进行了一个实例的评价.从该厂的∑WESH图得出该厂的水及能源的利用率高,所用的原材料的稀缺性都不大,唯一较严重的问题是二甲苯的通过量大,危害性较严重.因此建议该厂在配方上尽量减少二甲苯的使用,开发新产品.     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

香叶油的研究进展

为了全面了解香叶油的研究现状,为我国香叶油的开发利用提供思路, 综述了香叶的栽培、组培技术研究、香叶油的应用、香叶油的提取及化学成分研究、香叶油调配研究等方面的现状,并对香叶品种的遗传改良提出一些有益的建议.     

胶原纤维的性能特点和作用

1胶原纤维巴西Novaprom胶原纤维是以精选的牛皮内剖层(真皮)组织提取的,它不同于明胶或明胶的衍生物。它的生产是在严格控制的时间和温度范围内进行的,从而确保其主要成分──胶原蛋白的活性不变,并以天然纤维的形式存在。它在肉制品中的结构呈纤维状而不是一般的胶冻,因而这种结构是非常稳定的,是不可逆的。它是很好的功能性动物纤维蛋白,在肉制品及鱼糜制品等相关的食品中得到广泛的应用。2胶原纤维的性能及相关指标(1)蛋白质含量:胶原纤维中的动物蛋白质(M×6.25)高达98%,含有人体必需的氨基酸。(2)吸水、持水性:胶原纤维结构良好,呈矩…     

鲜为人知的科学珍闻

有言在先,珍闻的挑选奉行以下原则:科学应该是有趣的,科学之所以好玩,部分原因在于你了解、知道这些奇谈怪论的存在。科学的伟大之处在于,它不必是教条的、有价值的实验,也不要求对所有理论进行最准确的过滤以得     

玻璃纤维拉丝池窑配合料设备研制的进展

玻璃纤维池窑拉丝生产线配合料的制备中,原料是形成优质玻璃液的基础,因此可以说配合料的稳定性、均匀性和准确性对玻璃纤维的质量起着决定的作用.生产实践证明:组分和粒度均匀的配合料,不但能强化玻璃液的熔化和澄清过程,而且还能减少或消除影响玻璃质量的各种弊病.所以认真拟定玻璃纤维原料的成分和选择玻璃纤维的种类和化学性质:严格控制进厂原料化学成分、粒度和水份;做好原料的分堆、存放、加工、称量、混合、输送是优质配合料制备不可缺少的手段,这也是做好玻璃纤维池窑配合料的基本任务.     

氢氧化镁阻燃剂的研究进展

主要论述了国内外阻燃剂的种类和发展,指出由于环境和健康的原因,无机阻燃剂是最有发展前途的,其中的氢氧化镁因其特有的性质,在无机阻燃剂中尤为突出.考虑到氢氧化镁的广泛应用的前景和其本身的缺点,对其改性成为业界的研究重点,其中主要介绍了钛酸酯、硬脂酸(盐)、镁盐晶须和胶囊化等技术,指出以后的发展方向是在改性基础上的协同作用.     

高浸透性大分子聚酯乳液的研制

1前言 随着池窑生产的发展,原有的浸润剂在快速浸润性和快速浸透性方面无法得到满足.意大利DSM公司聚酯乳液是公认的喷射纱浸润剂最好的成膜剂.本项目的目的是研制出能工业化生产的与DSM公司产品质量相当的聚酯乳液,替代进口,节约外汇,满足我国池窑发展需要,争创良好的经济社会效益.     

宁静——使艺术深华

宁静的山是心灵的绘画,宁静的水是灵魂的诗篇,宁静的夜是精神的书籍。在这越来越充斥着物欲纵横的社会,浮躁成了现代人的代名词,而保持一颗宁静的心,尤其在艺术创作中显得尤为重要。     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

Analyse Expérimentale et Numérique du Comportement de Membranes Thermoplastiques en ABS et en HIPS dans le Procédé de Thermoformage

In this work, we are interested, on the one hand in the characterization of circular polymeric ABS and HIPS membrane under biaxial deformation using the bubble inflation technique, on the other hand in modelling and numerical simulation of the thermoforming of ABS and HIPS materials using the dynamic finite element method. Hyperelastic models (Mooney‐Rivlin, Ogden) are considered. First, the governing equations for the inflation of a flat circular membrane are solved using a variable‐step‐size‐finite difference method and a modified Levenberg‐Marquardt algorithm to minimize the difference between the calculated and measured inflation pressure. This will determine the material constants embedded within the models used. For numerical simulation, the lagrangian formulation together with the assumption of the membrane theory is used. Moreover, the influence of the hyperalastic model on the thickness and on the stress distribution in the thermoforming sheet are analysed for ABS and HIPS materials.     

ACR对PVC加工性能的影响

详细研究了丙烯酸酯类PVC加工助剂———ACR的特性黏度、组成对PVC共混物加工性能的影响。结果表明,随着甲基丙烯酸甲酯用量的下降和丙烯酸丁酯用量的提高,其塑化速度增大,但熔体强度降低,在组成相同的情况下,特性黏度越大,塑化越慢,熔体强度越大;丙烯酸酯类加工助剂对PVC制品的拉伸强度和维卡软化点无明显影响,高黏度的加工助剂有提高PVC制品拉伸强度和维卡软化点的趋势。     

Kinetics of organic solvent-soluble and native lipase

Organic solvent-soluble lipase was prepared with a synthetic detergent. The solvent-soluble lipase was presumed to be a complex of the enzyme and the detergent. To investigate the effect of the detergent attachment to the enzyme on the reaction properties, the kinetics of the solvent-soluble lipase and of the native lipase were estimated by using glycerides in a homogeneous solution of buffer and tetrahydrofuran. Analysis of the direct interaction between the enzyme and the substrate could serve to characterize the steric structure around the active site of the lipase. The K_m values also differentiated the solvent-soluble lipase from the native lipase. These findings show for the first time that the detergent surrounding the enzyme molecule may affect not only the solubility of the enzyme, but its kinetics as well.     

液滴撞击微结构疏水表面的动态特性

对去离子水滴撞击不同几何尺寸显微结构方柱和方孔状疏水表面的动态特性进行了研究。结果表明：当液滴以不同速度撞击微方柱疏水表面时,液滴展现铺展和回缩过程,且随着韦伯数（We数）增大,最大铺展直径增大,并伴随卫星液滴出现,但到达最大铺展直径的时间一致;而当液滴以相同的速度（We数相同）撞击间距不同的微方柱疏水表面时,液滴的最大铺展直径随着间距的增大而减小,且铺展过程会液滴浸润状态变得不稳定,发生由Cassie向Wenzel状态的浸润转变。当微方柱间距较小时,液滴受到的黏附功越小,越易发生向Cassie状态的转变;液滴撞击微方孔疏水表面时,液滴以规则的圆环状向外铺展和回缩,最后呈现近似规则的椭球状,不会发生向Wenzel状态的浸润转变,利用建立的物理模型对前述现象进行了分析。     

一种自适应柱状密封气膜特性分析

提出一种自适应柱状气膜密封,构建气膜-密封环为研究对象,考虑了偏心间隙发散问题,并定义Rayleigh台阶对气膜周期的突变性,建立了气膜雷诺方程和膜厚变化函数关系式的动力润滑数值模型,获得了摩擦副气膜润滑特性,研究结果表明：气膜力随转速和压力升高而增加,泄漏量随压力升高而增加但是随转速增加而下降,说明密封内部压力流占主导地位。随后,利用曲面槽型雕刻技术,结合高速试验台对密封进行测试,结果表明：理论计算模型与试验结果吻合度较高,斜槽区域存在更多擦痕与磨损,说明斜槽浮动性弱于直列槽;但斜槽的切向流动小于直列槽,导致斜槽泄漏量小于直列槽。该研究成果为自适应柱状气膜密封的气体流动规律和应用提供了理论基础。     

水平及竖直基底上微小固着液滴的蒸发特性分析

为揭示非水平表面上微小蒸发液滴的传热传质特性,本文在准稳态模型的假设下构造三维液滴模型,综合考虑了蒸气扩散、蒸发冷却以及气相域中的自然对流这3种传输机理,对水平以及竖直基底上液滴的蒸发过程进行数值研究。通过分析气液界面上温度分布、蒸发通量分布及总蒸发率的变化,重点探究了基底过热度以及重力的改变对液滴蒸发特性的影响。结果表明：与水平基底上温度的对称分布不同,竖直基底上气液界面温度分布表现出明显的非对称性,且非对称性随基底过热度的升高而增强,最低温度点不再位于液滴顶点,而向一侧偏移。此外,水平基底上气液界面局部蒸发通量呈对称分布,各截面分布相似,而竖直基底上局部蒸发通量分布则呈现出显著的非对称性以及各截面异性,非对称性随着基底过热度的升高而增强,这是重力改变后气相域自然对流发生改变的结果。与水平基底相比,竖直基底上蒸发率更高,总蒸发时间更少。最后,基底由水平变为竖直时,液滴内部流场由对称双涡转变为非对称单涡,单涡流速显著大于双涡流速,液滴内流速随基底过热度的上升而增大,单涡环流造成了气液界面温度分布的改变以及最低温度点的偏移。     

Lipid distribution on textiles in relation to washing with lipases

Effectiveness of lipase in detergency was studied using three test soils (lard, artificial sebum, and olive oil) on a woven cotton fabric. Distribution of oily soil on fabrics was determined for three different treatments (unwashed, washed with detergent without lipase, and washed with detergent plus lipase). Osmium tetroxide was used to label lipid soil for analysis in the scanning electron microscope. Both longitudinal and cross-sectional backscattered electron images for unwashed samples showed that soil was present on surfaces of the cotton fibers and in interfiber spaces of the yarn bundle. Lard soiled samples had large deposits on the fabric surfaces, while artificial sebum and olive oil appeared more uniformly distributed throughout the textile. Oil was deposited in the interfiber capillaries of the yarn bundle and in the crenulation, secondary walls, and lumen of the fibers. Energy dispersive X-ray microanalysis was used to determine relative concentrations of oil at selected morphological locations within the fiber structure and at the fiber surface. Soil distributions within the fibrous structures differed with type of soil and laundry treatment. Backscattered electron images dramatically demonstrated the effect of lipase on cleaning. After washing with detergent plus lipase, yarn surfaces had much less residual soil; residual soil that remained was in the irregularities of the cotton fiber surfaces. Concentrations of oil in the secondary walls, crenulations, lumen, and the fiber surfaces were lower after lipase treatment for all three soils. While washing with detergent removed soil from the yarn and fiber surfaces and the crenulation of the cotton fiber, only the samples washed with detergent plus lipase had lower concentrations of soils within the secondary wall and lumen of the cotton fibers. Fabrics soiled with olive oil and washed with detergent plus lipase had the lowest concentrations of residual soil across the textile structure; the residual soil observed was mainly in the irregularities on the fiber surfaces.     

二氧化钛改性α-氧化铝载体对银催化剂催化乙烯环氧化反应性能的影响

为了排除载体孔结构变化对催化性能的影响,研究了二氧化钛改性α-氧化铝载体对银催化剂催化乙烯环氧化反应性能的影响。研究结果表明,二氧化钛表面改性α-氧化铝载体对载体的比表面积、孔结构无明显影响;载体表面改性导致催化活性组分银在载体表面均匀分散,分散状况明显改善;经二氧化钛改性后载体表面与银的相互作用增强;对单负载银催化剂,由改性载体制备的银催化剂的活性和选择性均下降,改性对催化性能明显不利;对于共浸渍法制备的多组分银催化剂,低温焙烧对催化性能不利,而由经1000℃高温焙烧的二氧化钛改性载体制备的银催化剂的催化活性明显提高。研究表明,载体表面等电点降低及其与银的强相互作用是造成催化剂上金属银良好分散的主要原因;此外,银催化剂助剂的存在减弱了二氧化钛改性载体与银之间的强相互作用、抑制了环氧乙烷（EO）深度反应的活性,两者协同作用提升了多组分银催化剂的催化反应性能。     

煤油贮箱冷氦鼓泡增压过程数值研究

火箭飞行过程中,约90 K的低温氦气用以加压室温下的煤油贮箱使煤油流出,保障发动机燃料供应。为尽可能减少氦气用量,设计低温氦气从液相中喷入,使得氦气在贮箱内上升过程先和液态煤油充分换热升温,再进入气相空间增压。但该过程可能引起两个不利的结果,首先浸没在煤油中的低温氦气管路表面可能结冰,结冰沉底或可能堵塞发动机滤网;其次氦气可能被煤油携带,从而排出口位置可能出现气液两相流。这两种情况都对火箭发动机稳定运行造成负面影响,因此是不允许的。对低温氦气在贮箱中心喷入和环向多孔喷入两种结构的气液两相流过程进行了数值研究,构建了基于Euler-Euler模型的两相传热非稳态模型,数值结果与地面实验观察到的现象进行了定性对比,定性验证了模型的准确性。重点考察了煤油排出过程两种喷入结构的气液两相流分布以及煤油结冰可能性。研究结果从机理上解释了实验现象,并为煤油贮箱增压排出方案设计提供了参考。