Study of miscibility,crystallization, mechanical properties,and thermal stability of blends of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Natural amorphous polymer poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3HB4HB) containing 41 mol % of 4HB was blended with poly(3‐hydroxybutyrate) (PHB) with an aim to improve the properties of PHB. The influence of P3HB4HB contents on thermal and mechanical properties of the blends was evaluated with differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, stress–strain measurement and thermo gravimetric analyzer. Miscibility of PHB/P3HB4HB blends was mainly decided by the contents of P3HB4HB. When P3HB4HB exceeded 50 wt %, the two polymer phases separated and showed immiscibility. The addition of P3HB4HB did not alter the crystallinity of PHB, yet it diluted the PHB crystalline phase as revealed by DSC studies. DSC and FTIR results showed that the overall crystallinity of the blends decreased remarkably with increasing of P3HB4HB contents. Decreased glass transition temperature and crystallinity imparted desired flexibility for the blends. The ductility of the blends increased progressively with increasing of P3HB4HB content. Thus, the PHB mechanical properties can be modulated by changing the blend composition. P3HB4HB did not significantly improve the thermal stability of PHB, yet it is possible to melt process PHB without much molecular weights loss via blending it with suitable amounts of P3HB4HB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Miscibility and crystallization behaviors of poly(3‐hydroxybutyrate‐co‐11%‐4‐hydroxybutyrate)/Poly(3‐hydroxybutyrate‐co‐33%‐4‐hydroxybutyrate) blends

Biopolyesters poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) with an 11 mol % 4HB content [P(3HB‐co‐11%‐4HB)] and a 33 mol % 4HB content [P(3HB‐co‐33%‐4HB)] were blended by a solvent‐casting method. The thermal properties were investigated with differential scanning calorimetry. The single glass‐transition temperature of the blends revealed that the two components were miscible when the content of P(3HB‐co‐33%‐4HB) was less than 30% or more than 70 wt %. The blends, however, were immiscible when the P(3HB‐co‐33%‐4HB) content was between 30 and 70%. The miscibility of the blends was also confirmed by scanning electron microscopy morphology observation. In the crystallite structure study, X‐ray diffraction patterns demonstrated that the crystallites of the blends were mainly from poly(3‐hydroxybutyrate) units. With the addition of P(3HB‐co‐33%‐4HB), larger crystallites with lower crystallization degrees were induced. Isothermal crystallization was used to analyze the melting crystallization kinetics. The Avrami exponent was kept around 2; this indicated that the crystallization mode was not affected by the blending. The equilibrium melting temperature decreased from 144 to 140°C for the 80/20 and 70/30 blends P(3HB‐co‐11%‐4HB)/P(3HB‐co‐33%‐4HB). This hinted that the crystallization tendency decreased with a higher P(3HB‐co‐33%‐4HB) content. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Miscibility,crystallization, and mechanical properties of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/ poly(butylene succinate) blends

Naturally amorphous biopolyester poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) containing 21 mol % of 4HB was blended with semi‐crystal poly(butylene succinate) (PBS) with an aim to improve the properties of aliphatic polyesters. The effect of PBS contents on miscibility, thermal properties, crystallization kinetics, and mechanical property of the blends was evaluated by DSC, TGA, FTIR, wide‐angle X‐ray diffractometer (WAXD), Scanning Electron Microscope (SEM), and universal material testing machine. The thermal stability of P3/4HB was enhanced by blending with PBS. When PBS content is less than 30 wt %, the two polymers show better miscibility and their crystallization trend was enhanced by each other. The optimum mechanical properties were observed at the 5–10 wt % PBS blends. However, when the PBS content is more than 30 wt %, phase inversion happened. And the two polymers give lower miscibility and poor mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Crystallization kinetics and melting behaviour of microbial poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)

Isothermal and non‐isothermal crystallization kinetics of microbial poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐3HHx)] was investigated by differential scanning calorimetry (DSC) and ¹³C solid‐state nuclear magnetic resonance (NMR). Avrami analysis was performed to obtain the kinetic parameters of primary crystallization. The results showed that the Avrami equation was suitable for describing the isothermal and non‐isothermal crystallization processes of P(3HB‐3HHx). The equilibrium melting temperature of P(3HB‐3HHx) and its nucleation constant of crystal growth kinetics, which were obtained by using the Hoffman–Weeks equation and the Lauritzen–Hoffmann model, were, respectively, 121.8 °C and 2.87 × 10⁵ K² when using the empirical ‘universal’ values of U* = 1500 cal mol^?1. During the heating process, the melting behaviour of P(3HB‐3HHx) for both isothermal and non‐isothermal crystallization showed multiple melting peaks, which was the result of melting recrystallization. The lower melting peak resulted from the melting of crystals formed during the corresponding crystallization process, while the higher melting peak resulted from the recrystallization that took place during the heating process. Copyright © 2005 Society of Chemical Industry     

Blends of bacterial poly[(R)‐3‐hydroxybutyrate] with oligo[(R,S)‐3‐hydroxybutyrate]‐diol

The miscibility, melting and crystallization behaviour of poly[(R)‐3‐hydroxybutyrate], PHB, and oligo[(R,S)‐3‐hydroxybutyrate]‐diol, oligo‐HB, blends have been investigated by differential scanning calorimetry: thermograms of blends containing up to 60 wt% oligo‐HB showed behaviour characteristic of single‐phase amorphous glasses with a composition dependent glass transition, T_g, and a depression in the equilibrium melting temperature of PHB. The negative value of the interaction parameter, determined from the equilibrium melting depression, confirms miscibility between blend components. In parallel studies, glass transition relaxations of different melt‐crystallized polymer blends containing 0–20 wt% oligo‐HB were dielectrically investigated between ?70 °C and 120 °C in the 100 Hz to 50 kHz range. The results revealed the existence of a single α‐relaxation process for blends, indicating the miscibility between amorphous fractions of PHB and oligo‐HB. © 2002 Society of Chemical Industry     

Morphology and properties of biodegradable and biosourced polylactide blends with poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Biodegradable polymer blends based on biosourced polymers, namely polylactide (PLA) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐4HB)), were prepared by melt compounding. The effects of P(3HB‐co‐4HB) on the miscibility, phase morphology, thermal behavior, mechanical properties, and biodegradability of PLA/P(3HB‐co‐4HB) blends were investigated. The blend was an immiscible system with the P(3HB‐co‐4HB) domains evenly dispersed in the PLA matrix. However, the T_g of P(3HB‐co‐4HB) component in the blends decreased compared with neat P(3HB‐co‐4HB), which might be attributed to that the presence of the phase interface between PLA and P(3HB‐co‐4HB) resulted in enhanced chain mobility near interface. The addition of P(3HB‐co‐4HB) enhanced the cold crystallization of PLA in the blends due to the nucleation enhancement of PLA caused by the enhanced chain mobility near the phase interface between PLA and P(3HB‐co‐4HB) in the immiscible blends. With the increase in P(3HB‐co‐4HB) content, the blends showed decreased tensile strength and modulus; however, the elongation at beak was increased significantly, indicating that the inherent brittlement of PLA was improved by adding P(3HB‐co‐4HB). The interesting aspect was that the biodegradability of PLA is significantly enhanced after blends preparation. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Nucleation Effect of Layered Metal Phosphonate on Crystallization of Bacterial Poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyhexanoate)]

The nucleating effect of zinc phenylphosphonate (PPZn) was investigated on the as‐bacterially synthesized poly(3‐hydroxybutyrate) [P(3HB)] and poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyhexanoate)]s [P(3HB‐co‐3HHx)s] in order to improve their crystallization rate. PPZn is found an efficient nucleating agent on the crystallization of P(3HB) and P(3HB‐co‐3HHx) with low 3HHx unit content. The nucleation mechanism is proposed to be epitaxial nucleation. Both the comonomer‐unit composition and its distribution of P(3HB‐co‐3HHx)s were found exhibiting significant effect on the nucleating effect of PPZn. It is found that PPZn is more efficient on nucleating the crystallization of P(3HB‐co‐3HHx) with a broader comonomer‐unit compositional distribution than that with a narrower distribution.

     

Preparation and characterization of microbial biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/organoclay nanocomposites

Novel biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)]/organoclay nanocomposites were prepared via solution casting. Exfoliated nanocomposite structure was confirmed by wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM) for the nanocomposites with low organoclay loadings (≤3 wt%), whereas the mixtures of exfoliated and unexfoliated organoclays were appeared in the nanocomposite with an organoclay content of 5 wt%. The organoclay fillers accelerated significantly the cold crystallization process of P(3HB‐co‐4HB) matrix. The thermal stability of the nanocomposites was in general better than that of pristine P(3HB‐co‐4HB). Considerable increase in tensile modulus was observed for the nanocomposites, especially at an organoclay content of 3 wt%. These results demonstrated that the nanocomposites improved the material properties of P(3HB‐co‐4HB). POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Rheological,thermal, and mechanical properties of P (3HB‐co‐4HB) and P (3HB‐co‐4HB)/EVA blends

Poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] fiber and P(3HB‐co‐4HB)/EVA fiber were obtained by single screw extrusion machine. The rheology of P(3HB‐co‐4HB) and P(3HB‐co‐4HB)/EVA blends was characterized by capillary rheometer, and the chemical groups of the blends were characterized with Fourier transform infrared spectroscopy (FT‐IR). The crystallization behavior and thermal, mechanical and elastic properties of the fibers were measured by differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA) and single fiber strength tester, respectively. Besides, the moisture regain and drying shrinkage rates of the fibers were tested. These results showed that P(3HB‐co‐4HB)/EVA blends have better flowability, crystallinity, and thermal stability than P(3HB‐co‐4HB) fiber. The fracture strength of the P(3HB‐co‐4HB)/EVA fiber decreases with increasing the EVA content, but the elongation at break shows the contrary tendency. The rebound resilience ratio of P(3HB‐co‐4HB)/EVA fiber reaches 100%. Both moisture regain and drying shrinkage increase first and then decrease with increasing the EVA content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41206.     

Effect of nucleation agents on the crystallization of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB)

Boron nitride (BN), talc, hydroxyapatite (HA), and zinc stearate (ZnSt) were investigated as nucleation agents (NA) for nonfossil‐based poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) plastics. Nonisothermal crystallization behaviors of the P3/4HB/NA blends were examined by DSC. It revealed that BN is the most efficient nucleation agent to promote the crystallization rate, however, but not the crystallization degree. The lasting crystallization of P3/4HB was also removed. The nucleation effect was strengthened with increase of BN content up to 1% and then slackened deeply when further BN was added. Isothermal crystallization analysis revealed that the addition of nucleation agent BN does not alter the crystal growth mode of P3/4HB, with maintaining the Avrami parameter n value around 2.40. Talc did enhance the crystallization of P3/4HB with however milder crystal growth rate. HA and ZnSt did not promote, but depressed the crystallization of P3/4HB plastics. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Miscibility and morphology of chiral semicrystalline poly‐(R)‐(3‐hydroxybutyrate)/chitosan and poly‐(R)‐(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/chitosan blends studied with DSC, 1H T1 and T1ρ CRAMPS

The phase structure of poly‐(R)‐(3‐hydroxybutyrate) (PHB)/chitosan and poly‐(R)‐(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV))/chitosan blends were studied with ¹H CRAMPS (combined rotation and multiple pulse spectroscopy). ¹H T₁ was measured with a modified BR24 sequence that yielded an intensity decay to zero mode rather than the traditional inversion‐recovery mode. ¹H T_1ρ was measured with a 40‐kHz spin‐lock pulse inserted between the initial 90° pulse and the BR24 pulse train. The chemical shift scale is referenced to the methyl group of PHB as 1.27 ppm relative to tetramethylsilane (TMS) based on ¹H liquid NMR of PHB. Single exponential T₁ decay is observed for the β‐hydrogen of PHB or P(HB‐co‐HV) at 5.4 ppm and for the chitosan at 3.7 ppm. T₁ values of the blends are either faster than or intermediate to those of the plain polymers. The T_1ρ decay of β‐hydrogen is bi‐exponential. The slow T_1ρ decay component is interpreted as the crystalline phase of PHB or P(HB‐co‐HV). The degree of crystallinity decreases with increasing wt % of chitosan in the blend. The fast T_1ρ of β‐hydrogen and the T_1ρ of chitosan in the blends either follow the same trend as or faster than the weight‐averaged values based on the T_1ρ of the plain polymers. Together with the observation by differential scanning calorimeter (DSC) of a melting point depression and one effective glass transition temperature in the blends, the experimental evidence strongly suggests that chitosan is miscible with either PHB or P(HB‐co‐HV) at all compositions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1253–1258, 2002     

Miscibility,crystallization kinetics,and mechanical properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)(PHBV)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)(P3/4HB) blends

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)(PHBV)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) blend films were prepared by solvent‐cast method. The nonisothermal crystallization results showed that PHBV and P3/4HB are miscible due to a single glass transition temperature (T_g), which is dependent on blend composition. The isothermal crystallization results demonstrate that the crystallization rate of PHBV becomes slower after adding amorphous P3/4HB with 19.2 mol% 4HB, which could be proved through depression of equilibrium melt point ($T_m^o$ ) from 183.7°C to 177.6°C. For pure PHBV and PHBV/P3/4HB (80/20) blend, the maximum crystallization rate appeared at 88°C and 84°C, respectively. FTIR analysis showed that PHBV/P3/4HB blend films would maintain the helical structure, similar to pure PHBV. Meanwhile, with increasing P3/4HB content, the inter‐ and intra‐interactions of PHBV and P3/4HB decrease gradually. Besides, a lower elastic modulus and a higher elongation at break were obtained, which show that the addition of P3/4HB would make the brittle PHBV to ductile materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallization of poly(3‐hydroxybutyrate) with stereocomplexed polylactide as biodegradable nucleation agent

Crystallization kinetics behavior and morphology of poly(3‐hydroxybutyrate) (PHB) blended with of 2–10 wt% loadings of poly(L ‐ and D ‐lactic acid) (PLLA and PDLA) stereocomplex crystallites, as biodegradable nucleating agents, were studied using differential scanning calorimetry, polarizing‐light optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). Blending PLLA with PDLA at 1:1 weight ratio led to formation of stereocomplexed PLA (sc‐PLA), which was incorporated as small crystalline nuclei into PHB for investigating melt‐crystallization kinetics. The Avrami equation was used to analyze the isothermal crystallization of PHB. The stereocomplexed crystallites acted as nucleation sites in blends and accelerated the crystallization rates of PHB by increasing the crystallization rate constant k and decreasing the half‐time (t_1/2). The PHB crystallization was nucleated most effectively with 10 wt% stereocomplexed crystallites, as evidenced byPOM results. The sc‐PLA complexes (nucleated PHB crystals) exhibit much small spherulite sizes but possess the same crystal cell morphology as that of neat PHB based on the WAXD result. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Crystallization and thermal properties of biodegradable polyurethanes based on poly[(R)‐3‐hydroxybutyrate] and their composites with chitin whiskers

A series of biodegradable polyurethanes (PUs) were synthesized from hydroxylated bacterial poly[(R)‐3‐hydroxybutyrate], P[(R)‐HB]‐diol, as crystallizable hard segment and hydroxyl‐terminated synthetic poly[(R,S)‐3‐hydroxybutyrate), P[(R,S)‐HB]‐diol, as an amorphous soft segment, using 1,6‐hexamethylene diisocyanate, as non‐toxic connecting agent. The P[(R)‐HB] content was varied from 30 to 70 wt %. The resulting copolymers were characterized by FT‐IR, ¹H‐NMR, DSC, and TGA. The DSC data revealed that the melting of P[(R)‐HB] segment increases with increasing its own content in the PUs. The cold and melt crystallization are enhanced with increasing P[(R)‐HB] content. The TGA data revealed that the thermal decomposition mainly occurred via a single degradation step and the thermal stability slightly increased with increasing P[(R)‐HB] content. The non‐isothermal crystallization behavior of PU sample containing 40 wt % PHB with and without α‐Chitin whiskers was studied using DSC, and their kinetics data were investigated via the Avrami, Ozawa, and Z.S. Mo methods, respectively. Crystallization activation energy was estimated using Kissinger's method. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40784.     

Miscibility and intermolecular hydrogen‐bonding interactions in poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/poly(4‐vinyl phenol) binary blends

The miscibility and hydrogen bonding interaction in the poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/poly(4‐vinyl phenol) [P(3HB‐co‐3HH)/PVPh] binary blends were investigated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The DSC results indicate that P(3HB‐co‐3HH) with 20 mol % 3HH unit content is fully miscible with PVPh, and FTIR studies reveal the existence of hydrogen bonding interaction between the carbonyl groups of P(3HB‐co‐3HH) and the hydroxyl groups of PVPh. The effect of blending of PVPh on the mechanical properties of P(3HB‐co‐3HH) were studied by tensile testing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Miscibility and crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ poly(methyl methacrylate) blends

The miscibility and crystallization kinetics of the blends of random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] copolymer and poly(methyl methacrylate) (PMMA) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PMMA blends were miscible in the melt. Thus the single glass‐transition temperature (T_g) of the blends within the whole composition range suggests that P(HB‐co‐HV) and PMMA were totally miscible for the miscible blends. The equilibrium melting point (T°_m) of P(HB‐co‐HV) in the P(HB‐co‐HV)/PMMA blends decreased with increasing PMMA. The T°_m depression supports the miscibility of the blends. With respect to the results of crystallization kinetics, it was found that both the spherulitic growth rate and the overall crystallization rate decreased with the addition of PMMA. The kinetics retardation was attributed to the decrease in P(HB‐co‐HV) molecular mobility and dilution of P(HB‐co‐HV) concentration resulting from the addition of PMMA, which has a higher T_g. According to secondary nucleation theory, the kinetics of spherulitic crystallization of P(HB‐co‐HV) in the blends was analyzed in the studied temperature range. The crystallizations of P(HB‐co‐HV) in P(HB‐co‐HV)/PMMA blends were assigned to n = 4, regime III growth process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3595–3603, 2004     

Processability modifications of poly(3‐hydroxybutyrate) by plasticizing,blending, and stabilizing

Poly(3‐hydroxybutyrate) (PHB) was plasticized with dioctyl (o‐)phthalate, dioctyl sebacate, and acetyl tributyl citrate (ATBC). The thermal properties, mechanical properties, and melt flow ability were studied with differential scanning calorimetry, thermogravimetric analysis, a universal material testing machine, and a melt flow indexer. ATBC was revealed to be an efficient plasticizer, reducing the glass‐transition temperature and increasing the thermoplasticization ability of PHB. We also blended poly(3‐hydroxybutyrate‐co‐hydroxyhexanoate) (PHBHHx) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3/4HB)] with PHB, ATBC, and antioxidant 1010 to overcome the brittleness of PHB and improve the melt flow stability of the materials. PHBHHx did little to improve the thermal processing but increased the fluidity of PHB, and P(3/4HB) toned the toughness of PHB. The addition of antioxidant 1010 enhanced the thermal stabilization of PHB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/silica nanocomposites

Biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)]/silica nanocomposites were prepared by melt compounding. The effects of silica on the morphology, crystallization, thermal stability, mechanical properties, and biodegradability of P(3HB‐co‐4HB) were investigated. The nanoparticles showed a fine and homogeneous dispersion in the P(3HB‐co‐4HB) matrix for silica contents below 5 wt%, whereas some aggregates were detected with further increasing silica content. The addition of silica enhanced the crystallization of P(3HB‐co‐4HB) in the nanocomposites due to the heterogeneous nucleation effect of silica. However, the crystal structure of P(3HB‐co‐4HB) was not modified in the presence of silica. The thermal stability of P(3HB‐co‐4HB) was enhanced by the incorporation of silica. Silica was an effective reinforcing agent for P(3HB‐co‐4HB), and the modulus and tensile strength of the nanocomposites increased, whereas the elongation at break decreased with increasing silica loading. The exciting aspect of this work was that the rate of enzymatic degradation of P(3HB‐co‐4HB) was enhanced significantly after nanocomposites preparation. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(vinyl acetate) blends

The miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV))/poly(vinyl acetate) (PVAc) blends have been investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PVAc blends were miscible in the melt over the whole compositions. Thus the blend exhibited a single glass transition temperature (T_g), which increased with increasing PVAc composition. The spherulitic morphologies of P(HB‐co‐HV)/PVAc blends indicated that the PVAc was predominantly segregated into P(HB‐co‐HV) interlamellar or interfibrillar regions during P(HB‐co‐HV) crystallization because of the volume‐filled spherulites. As to the crystallization kinetics study, it was found that the overall crystallization and crystal growth rates decreased with the addition of PVAc. The kinetics retardation was primarily attributed to the reduction of chain mobility and dilution of P(HB‐co‐HV) upon mixing with higher T_g PVAc. The overall crystallization rate was predominantly governed by the spherulitic growth rate and promoted by the samples treated with the quenched state because of the higher nucleation density. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 980–988, 2006     

Biodegradation of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) by a novel P3/4HB depolymerase purified from Agrobacterium sp. DSGZ

A poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB)‐degrading strain, Agrobacterium sp. DSGZ, was isolated from sewage by poly(3‐hydroxybutyrate) (PHB) mineral agar plates. A novel P3/4HB depolymerase with a molecular weight of 34 kDa was purified through a novel single‐step affinity chromatography method from the culture supernatant of the strain by using P3/4HB powder as a substrate. The purified depolymerase showed optimum activity at pH 7.0 and 50°C, and was stable at the pH range of 6.0 to 9.0 and temperature below 50°C. Enzyme activity was strongly inhibited by phenylmethylsulfonyl fluoride (PMSF), ethylenediaminetetraacetic acid (EDTA), hydrophobic reagents, and some metal ions. The depolymerase degraded poly(3‐hydroxybutyrate) (PHB), poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV), P3/4HB, and polycaprolactone (PCL), instead of polylactic acid (PLA) or poly(butylene succinate) (PBS). Meanwhile, the depolymerase showed high hydrolytic activity against short‐chain length esters, such as butyrate acid ester and caprylic acid ester. The main degradation products of the depolymerase were identified as hydroxybutyrate monomers and dimers, and the monomers were identified as 3‐hydroxybutyrate (3HB) monomers and 4‐hydroxybutyrate (4HB) monomers. The preparation procedure, crystallinity, and 4HB composition of the P3/4HB copolymer showed evident effect on degradation behavior, and change in crystallinity was the main factor affecting degradation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42805.