Improving oxygen barrier properties of poly(ethylene terephthalate) by incorporating isophthalate. II. Effect of crystallization

The present study examined crystallization of poly(ethylene terephthalate) (PET) and a series of random and blocky copolymers in which up to 30% of the terephthalate was replaced with isophthalate. Isothermal crystallization kinetics and direct observation of the spherulitic morphology revealed that the blocky copolymers crystallized more rapidly than PET, at least in part, as the result of enhanced spherulite nucleation. The statistical copolymers with 10 and 20% isophthalate achieved almost the same level of crystallinity as that of the blocky copolymers. The statistical copolymers with 10% isophthalate crystallized almost as fast as PET, although the statistical copolymer with 20% isophthalate crystallized much more slowly. Crystallization substantially reduced the oxygen permeability. Analysis of oxygen‐transport parameters in terms of a two‐phase structural model that considered a dispersion of lower‐permeability spherulites in an amorphous matrix of higher permeability revealed that dedensification of the PET interlamellar amorphous regions was responsible for the unexpectedly high oxygen solubility of crystallized PET. In contrast, copolymerization with isophthalate prevented dedensification of the interlamellar amorphous regions. As a result, crystallization was more effective in reducing the oxygen permeability. It was speculated that segregation of kinked isophthalate units to the amorphous regions of the spherulite relieved constraint on the interlamellar amorphous chain segments. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1629–1642, 2005     

Blends of poly(ethylene terephthalate) and poly(butylene terephthalate)

Commercial grade poly(ethylene terephthalate), (PET, intrinsic viscosity = 0.80 dL/g) and poly(butylene terephthalate), (PBT, intrinsic viscosity = 1.00 dL/g) were melt blended over the entire composition range using a counterrotating twin‐screw extruder. The mechanical, thermal, electrical, and rheological properties of the blends were studied. All of the blends showed higher impact properties than that of PET or PBT. The 50:50 blend composition exhibited the highest impact value. Other mechanical properties also showed similar trends for blends of this composition. The addition of PBT increased the processability of PET. Differential scanning calorimetry data showed the presence of both phases. For all blends, only a single glass‐transition temperature was observed. The melting characteristics of one phase were influenced by the presence of the other. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 75–82, 2005     

A preliminary study of blends of bisphenol a polycarbonate and poly(ethylene terephthalate)

The microstructure of blends of bisphenol A polycarbonate (PC), and poly(ethylene terepthalate) (PETP) has been studied by solvent extraction, infrared spectrophotometry, differential scanning calorimetry and dynamic mechanical thermal analysis. The blends appear to contain two amorphous phases over the whole composition range. The tensile behaviour and the Charpy impact strength of some of the blends have been determined, before and after heat treatment at 125°C for 18 hours. Improved performance of the blends, compared with that of the homopolymers PC and PETP, has been demonstrated.     

Microstructure and crystallization of melt‐mixed poly(ethylene terephthalate)/poly(ethylene isophthalate) blends

Physical blends of poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI), abbreviated PET/PEI (80/20) blends, and of PET and a random poly(ethylene terephthalate‐co‐isophthalate) copolymer containing 40% ethylene isophthalate (PET₆₀I₄₀), abbreviated PET/PET₆₀I₄₀ (50/50) blends, were melt‐mixed at 270°C for different reactive blending times to give a series of copolymers containing 20 mol % of ethylene isophthalic units with different degrees of randomness. ¹³C‐NMR spectroscopy precisely determined the microstructure of the blends. The thermal and mechanical properties of the blends were evaluated by DSC and tensile assays, and the obtained results were compared with those obtained for PET and a statistically random PETI copolymer with the same composition. The microstructure of the blends gradually changed from a physical blend into a block copolymer, and finally into a random copolymer with the advance of transreaction time. The melting temperature and enthalpy of the blends decreased with the progress of melt‐mixing. Isothermal crystallization studies carried out on molten samples revealed the same trend for the crystallization rate. The effect of reaction time on crystallizability was more pronounced in the case of the PET/PET₆₀I₄₀ (50/50) blends. The Young's modulus of the melt‐mixed blends was comparable to that of PET, whereas the maximum tensile stress decreased with respect to that of PET. All blend samples showed a noticeable brittleness. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3076–3086, 2003     

Rheological and thermal properties of blends of modified poly(ethylene terephthalate) with p‐acetoxybenzoic acid and poly(butylene terephthalate)

Blending of thermotropic liquid crystalline polyesters (LCPs) with conventional polymers could result in materials that can be used as an alternative for short fiber‐reinforced thermoplastic composites, because of their low melt viscosity as well as their inherent high stiffness and strength, high use temperature, and excellent chemical resistance and low coefficient of expansion. In most of the blends was used LCP of 40 mol % of poly(ethylene terephthalate) (PET) and 60 mol % of p‐acetoxybenzoic acid (PABA). In this work, blends of several copolyesters having various PABA compositions from 10 to 70 mol % and poly(butylene terephthalate) (PBT) were prepared and their rheological and thermal properties were investigated. For convenience, the copolyesters were designated as PETA‐x, where x is the mol % of PABA. It was found that PET‐60 and PET‐70 copolyesters decreased the melt viscosity of PBT in the blends and those PBT/PETA‐60 and PBT/PETA‐70 blends showed different melt viscosity behaviors with the change in shear rate, while blends of PBT and PET‐x having less than 50 mol % of PABA exhibited totally different rheological behaviors. The blends of PBT with PETA‐50, PETA‐60, and PETA‐70 showed the morphology of multiple layers of fibers. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1797–1806, 1999     

Synthesis and characterisation of copolyesters from poly(ethylene terephthalate) and poly(hexamethylene terephthalate)

Copolyesters containing poly(ethylene terephthalate) and poly(hexamethylene terephthalate) (PHT) were prepared by a melt condensation reaction. The copolymers were characterised by infrared spectroscopy and intrinsic viscosity measurements. The density of the copolyesters decreased with increasing percentage of PHT segments in the backbone. Glass transition temperatures (T_g). melting points (T_m) and crystallisation temperatures (T_c) were determined by differential scanning calorimetry. An increase in the percentage of PHT resulted in decrease in T_g, T_m and T_c. The as-prepared copolyesters were crystalline in nature and no exotherm indicative of cold crystallisation was observed. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in a nitrogen atmosphere. An increase in percentage of PHT resulted in a decrease in initial decomposition temperature. The rate of crystallisation of the copolymers was studied by small angle light scattering. An increase in percentage of PHT resulted in an increase in the rate of crystallisation.     

Influence of branching on the properties of poly(ethylene terephthalate) fibers

A series of branched poly(ethylene terephthalate) samples was prepared by employing 0.07–0.42 mol % trimethylolpropane (TMP) for melt polycondensation. These polymers were characterized with respect to molar mass, intrinsic viscosity, and melt viscosity. Spinning into fibers took place at spinning speeds ranging from 2500 to 4500 m/min. The molecular orientation of the fibers as measured by birefringence and polarized fluorescence decreases with growing amounts of TMP, as does crystallinity. Thus with slightly branched polymers, higher spinning speeds than with a linear polymer can be used to achieve a certain property profile. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 728–734, 1999     

Uniaxial orientation and tensile properties of poly(ethylene terephthalate)/poly(ethylene-2,6-naphthalate) blends

Amorphous films of poly(ethylene terephthalate)/poly(ethylene-2,6-naphthalate) (PET/PEN) blends with different blend ratios were uniaxially drawn by solid-state coextrusion and the structure development during solid state deformation was studied. As-prepared blends showed two T_gs. The lower T_g was ∼72 °C, independent of the blend ratio. In contrast, the higher T_g increased with increasing PEN content. Thus, the coextrusion was carried out around the higher T_g of the sample. At a given draw ratio of 5, which was close to the achievable maximum draw ratio, the tensile strength of the drawn samples from the initially amorphous state increased gradually with increasing PEN content. On the other hand, the tensile modulus was found to decrease initially, reaching a minimum at 40-60 wt% PEN, and then increased as the PEN content increased. The results indicate that we can get the drawn films with a moderate tensile modulus and a high tensile strength. The drawn samples from the blends containing 40-60 wt% of PEN showed a maximum elongation at break, and a maximum thermal shrinkage around 100 °C. Also, the degree of stress-induced crystallinity showed a broad minimum around the blend ratio of 50% of PEN. These morphological characteristics explained well the effects of blend ratio on the tensile modulus and strength of drawn PET/PEN blend films.     

Effect of poly(ethylene glycol) on the solid‐state polymerization of poly(ethylene terephthalate)

Poly(ethylene glycol) (PEG) and end‐capped poly(ethylene glycol) (poly(ethylene glycol) dimethyl ether (PEGDME)) of number average molecular weight 1000 g mol^?1 was melt blended with poly(ethylene terephthalate) (PET) oligomer. NMR, DSC and WAXS techniques characterized the structure and morphology of the blends. Both these samples show reduction in T_g and similar crystallization behavior. Solid‐state polymerization (SSP) was performed on these blend samples using Sb₂O₃ as catalyst under reduced pressure at temperatures below the melting point of the samples. Inherent viscosity data indicate that for the blend sample with PEG there is enhancement of SSP rate, while for the sample with PEGDME the SSP rate is suppressed. NMR data showed that PEG is incorporated into the PET chain, while PEGDME does not react with PET. Copyright © 2005 Society of Chemical Industry     

A review on the potential biodegradability of poly(ethylene terephthalate)

This paper reviews the state of the art in the field of the hydrolytic degradation of poly(ethylene terephthalate) (PET) under bio-environmental conditions. Most of the papers published so far on this subject have been focused on the hydrolysis of PET at high temperatures. Although some authors claim to enhance the biodegradation properties of this aromatic polyester by copolymerization with readily hydrolysable aliphatic polyesters, no clear and satisfying conclusions can yet be formulated. Poly(ethylene terephthalate-co-lactic acid), poly(ethylene terephthalate-co-ethylene glycol), and poly(ethylene terephthalate-co-ε-caprolactone) block and random copolymers are the modifications mainly investigated for biodegradable applications. The hydrodegradability and biodegradability of PET, PET copolymers and PET blends are detailed in this review. A total of 89 references including 16 patents are cited. © 1999 Society of Chemical Industry     

Mechanical properties of poly(ethylene terephthalate) modified with functionalized polymers

This study examined the effect of blending poly(ethylene terephthalate) (PET) with 5% of a functionalized polymer. The blends were characterized by particle size and size distribution, unnotched tensile behavior, toughness, and notch sensitivity. The improved properties of blends that incorporated a functionalized elastomer were consistent with in situ formation of a graft copolymer by reaction with PET end groups. Triblock copolymers were examined that had styrene end blocks and an ethylene/butylene midblock (SEBS) with grafted maleic anhydride. The present study extended previous investigations that focused on level of grafting to examine the effects of component molecular weight and PET hydroxyl‐to‐carboxyl end‐group ratio. Increasing the molecular weight of the SEBS and decreasing the hydroxyl‐to‐carboxyl ratio of the PET increased the effectiveness of the SEBS. In addition, a mix of an unfunctionalized SEBS with a functionalized SEBS was more effective than a single SEBS with the same total anhydride content. The same elastomers were the most effective for modifying a lower molecular weight PET (intrinsic viscosity 0.73) and a higher molecular weight PET (intrinsic viscosity 0.95). Some functionalized polypropylenes included in the study did not enhance the properties of PET. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 203–219, 1999     

Improvement of compatibility of poly(ethylene terephthalate) and poly(ethylene octene) blends by γ‐irradiation

Blends of poly(ethylene terephthalate) (PET) and poly(ethylene octene) (POE) were prepared by melt blending with various amounts of trimethylolpropane triacylate (TMPTA). The mechanical properties, phase morphologies, and gel fractions at various absorbed doses of γ‐irradiation have been investigated. It was found that the toughness of blends was enhanced effectively after irradiation as well as the tensile properties. The elongation at break for all studied PET/POE blends (POE being up to 15 wt %) with 2 wt % TMPTA reached 250–400% at most absorbed doses of γ‐irradiation, approximately 50–80 times of those of untreated PET/POE blends. The impact strength of PET/POE (85/15 wt/wt) blends with 2 wt % TMPTA irradiated with as little as 30 kGy absorbed dose exceeded 17 kJ/m², being approximately 3.4 times of those of untreated blends. The improvement of the mechanical properties was supported by the morphology changes. Scanning electron microscope images of fracture surfaces showed a smaller dispersed phase and more indistinct inter‐phase boundaries in the irradiated blends. This indicates increased compatibility of PET and POE in the PET/POE blends. The changes of the morphologies and the enhancement of the mechanical properties were ascribed to the enhanced inter‐phase boundaries by the formation of complex graft structures confirmed by the results of the gelation extraction and Fourier Transform Infrared analyses. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Geometrical bowing and molecular orientation angle in biaxially stretched poly(ethylene terephthalate) films

The aim of this study was to investigate in greater detail the occurrence of geometrical bowing and the average molecular orientation direction in biaxially stretched and annealed film webs and to determine possible causes for these effects at a morphological level. This involved studying the temperature‐dependent behavior of annealed and nonannealed film webs and determining the geometrical bowing and average molecular orientation direction across the working width of the film. The average molecular orientation direction was measured offline using a polarimeter and also online using a novel online orientation sensor. It was shown that the geometrical bowing correlates directly with the amount of film shrinkage in machine direction which occurs during annealing in the transverse direction orienter. In addition, a possible explanation is given for the greater increase in the molecular orientation angle at the film edges compared with the geometrical bowing. Good agreement was found between online and offline measurement of the molecular orientation angle. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(ethylene terephthalate‐co‐isophthalate) copolyesters obtained from ethylene terephthalate and isophthalate oligomers

A series of poly(ethylene terephthalate‐co‐isophthalate) copolyesters containing upto 50%‐mole of isophthalic units were prepared by polycondensation from ethylene terephthalate and ethylene isophthalate fractions of linear oligomers containing from 5 to 6 repeating units in average. The polyesters were obtained in good yields and with high‐molecular‐weights. The microstructure of the copolyesters was studied as a function of reaction time by ¹³C‐NMR showing that a random distribution of the comonomers was achieved since the earlier stages of polycondensation. The melting temperature and enthalpy of the copolyesters decreased with the content of isophthalic units so that copolyesters containing more than 25% of these units were amorphous. Isothermal crystallization studies made on crystalline copolyesters revealed that the crystallization rate of copolyesters decreased with the content in isophthalic units. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of recycling on the properties of poly(ethylene terephthalate) films

Different proportions of recycled poly(ethylene terephthalate) (PET) films were blended with virgin PET and evaluated for physicomechanical, chemical, thermal, optical and barrier properties. The safety evaluation of the films for food contact applications has also been carried out. The variations in properties, such as tensile behaviour, impact strength, tear resistance, burst strength, gloss, haze, barrier properties, crystallization temperature and melting temperature, are reported. © 2000 Society of Chemical Industry     

Preparation and hydrolytic degradation of sulfonated poly(ethylene terephthalate) copolymers

A series of poly(ethylene terephthalate-co-ethylene 5-sodiosulfoisophthalate) copolyesters containing from 1 up to 50 mol% of sulfonated units was prepared by melt polycondensation from ethylene glycol and mixtures of dimethyl terephthalate and dimethyl 5-sodiosulfoisophthalate. The resulting copolymers had a random microstructure and contained oligo(ethylene glycol) units in amounts increasing with the content in sulfonated isophthalate units. Copolyesters with more than 20 mol% of 5-sodiosulfoisophthalic units were amorphous and easily soluble in water. The hydrodegradability of the copolyesters was very high as compared to poly(ethylene terephthalate), and increased with the content in sulfonated units. It was demonstrated that the susceptibility to acidic hydrolysis of these copolymers is mainly due to the presence of the sodium sulfonate groups, the influence of the oligo(ethylene glycol) units in this regard being noticeable but limited.     

Preparation of oxygen gas barrier poly(ethylene terephthalate) films by deposition of silicon oxide films plasma‐polymerized from a mixture of tetramethoxysilane and oxygen

To prepare silicon oxide (SiOx)‐deposited poly(ethylene terephthalate) films with high oxygen gas barrier capability, SiOx deposition by plasma polymerization has been investigated from the viewpoint of chemical composition. Tetramethoxysilane (TMOS) is suitable as a starting material for the synthesis of the SiOx films. The SiOx deposition under self‐bias, where the etching action occurs around an electrode surface, is effective in eliminating carbonaceous compounds from the deposited SiOx films. There is no difference in the chemical composition between the SiOx films deposited under self‐bias and under no self‐bias. The SiOx films are composed of a main component of Si O Si networks and a minor component of carbonized carbons. The SiOx films deposited under no self‐bias from the TMOS/O₂ mixture show good oxygen gas barrier capability, but the SiOx films deposited under the self‐bias show poor capability. The minimum oxygen permeation rate for poly(ethylene terephthalate) films deposited SiOx film is 0.10 cm³ m⁻² day⁻¹ atm⁻¹, which corresponds to an oxygen permeability coefficient of 1.4 × 10⁻¹⁷ cm³‐cm cm⁻² s⁻¹ cm⁻¹ Hg for the SiOx film itself. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2091–2100, 1999     

Morphology and crystallization of poly(ethylene terephthalate)

The melting behaviour and the morphology of poly(ethylene terephthalate) crystallized from the melt are reported. In general, dual or triple melting endotherms are seen, and single endotherms are seen when the samples are crystallized above 215°C for long times. The location of the uppermost endotherm was found to be constant below T_c = 230°C, and above that temperature the location depends on T_c. Therefore, we have shown that samples of PET which are crystallized above T_c = 230°C contain perfect crystals only; below T_c = 230°C, they contain perfect and imperfect crystals. Scanning electron microscopy showed that the perfect crystals are the dominant lamellae in the spherulitic structure, while the imperfect crystals are the subsidiary lamellae in the spherulitic structure, The amorphous regions are located between individual lamellae.     

PEN/PET共混物结晶行为研究

用差示扫描量热法(DSC)研究了不同共混比例PEN/PET共混物的熔体结晶行为,并进行了等温结晶动力学测定。结果表明:随着两种组分向中间比例(50/50)靠近,共混物的熔融温度越低,结晶速率也越慢。     

Synthesis and properties of poly(trimethylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) random copolyesters

Poly(trimethylene terephthalate‐co‐2‐methyl‐ ethylene terephthalate) random copolymers of various compositions were synthesized via traditional two‐step polycondensation by incorporating of 1,2‐propanediol. The molar composition of trimethylene terephthalate and 2‐methyl‐ethylene terephthalate units and chemical structure were confirmed by means of ¹H‐NMR and Fourier transform infrared. The thermal properties of the copolyesters were evaluated by DSC and TGA. As far as the thermal properties is concerned, the main effect of incorporation of 1,2‐propanediol was a lowering in the melting temperature, and an increment of glass transition temperature compared to homopolymer PTT. Due to the effect of the lateral methyl groups in the polymeric chain, the thermal stability is slightly decreased as the amount of the MET units is increased. Furthermore, the crystals of PTT/MET copolyesters were observed by hot‐stage optical polarizing microscopy at the indicated crystallization temperatures. As expected, the incorporation of MET units in the polymer chain of PTT was found to decrease the dimension of the crystals. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010