Synthesis,characterization, and antimicrobial activity of acrylic copolymers

2,4‐Dichlorophenyl methacrylate (2,4‐DMA) and vinyl acetate (VAc) were copolymerized with different feed ratios using dimethyl formamide (DMF) as a solvent and 2,2′‐azobisisobutyronitrile (AIBN) as an initiator at 70°C. The copolymers were characterized by infrared (IR) spectroscopy. Copolymer compositions were determined by ultraviolet (UV) spectroscopy. The monomer reactivity ratios were evaluated by the Fineman–Ross method. Average molecular weight and polydispersity index were determined by gel permeation chromatography (GPC), and the intrinsic viscosities of polymers were also discussed. Thermogravimetric analyses of polymers were carried out under a nitrogen atmosphere. The homo‐ and copolymers were tested for their antimicrobial activity against selected microorganisms. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 895–900, 2003     

Functional copolymers of p‐cumyl phenyl methacrylate and glycidyl methacrylate: Synthesis,characterization, and reactivity ratios

Free‐radical polymerization of p‐cumyl phenyl methacrylate (CPMA) was performed in benzene using bezoyl peroxide as an initiator at 80°C. The effect of time on the molecular weight was studied. Functional copolymers of CPMA and glycidyl methacrylate (GMA) with different feed ratios were synthesized by free‐radical polymerization in methyl ethyl ketone at 70°C, and they were characterized by FTIR and ¹H‐NMR spectroscopy. The molecular weights and polydispersity indexes of the polymers and copolymers were determined by gel permeation chromatography. The copolymer composition was determined by ¹H‐NMR. The glass‐transition temperature of the polymer and the copolymers was determined by differential scanning calorimetry. The reactivity ratios of the monomers were determined by the Fineman–Ross and Kelen–Tudos methods. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 336–347, 2005     

New soybean oil–styrene–divinylbenzene thermosetting copolymers. I. Synthesis and characterization

The cationic copolymerization of regular soybean oil, low‐saturation soybean oil (LoSatSoy oil), or conjugated LoSatSoy oil with styrene and divinylbenzene initiated by boron trifluoride diethyl etherate (BF₃·OEt₂) or related modified initiators provides viable polymers ranging from soft rubbers to hard, tough, or brittle plastics. The gelation time of the reaction varies from 1 × 10² to 2 × 10⁵ s at room temperature. The yields of bulk polymers are essentially quantitative. The amount of crosslinked polymer remaining after Soxhlet extraction ranges from 80 to 92%, depending on the stoichiometry and the type of oil used. Proton nuclear magnetic resonance spectroscopy and Soxhlet extraction data indicate that the structure of the resulting bulk polymer is a crosslinked polymer network interpenetrated with some linear or less‐crosslinked triglyceride oil–styrene–divinylbenzene copolymers, a small amount of low molecular weight free oil, and minor amounts of initiator fragments. The bulk polymers possess glass‐transition temperatures ranging from approximately 0 to 105°C, which are comparable to those of commercially available rubbery materials and conventional plastics. Thermogravimetric analysis (TGA) indicates that these copolymers are thermally stable under 200°C, with temperatures at 10% weight loss in air (T₁₀) ranging from 312 to 434°C, and temperatures at 50% weight loss in air (T₅₀) ranging from 445 to 480°C. Of the various polymeric materials, the conjugated LoSatSoy oil polymers have the highest glass‐transition temperatures (T_g) and thermal stabilities (T₁₀). The preceding properties that suggest that these soybean oil polymers may prove useful where petroleum‐based polymeric materials have found widespread utility. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 658–670, 2001     

Synthesis and properties of ethylene‐substituted styrene copolymers

The copolymerization of ethylene and substituted styrenes [RSt's; p‐methylstyrene (MSt), p‐tert‐butylstyrene (BSt), 2‐vinylnaphthalene (VN), and p‐(tert‐butyldimethylsilyloxy)styrene (BMSiOSt)] were investigated with dimethylsilylene(tetramethylcyclopentadienyl)(N‐tert‐butyl)titanium dichloride to yield the corresponding ethylene–RSt copolymers. The substituent on the styrene (St) monomers did not affect the monomer reactivity ratio. The effect of the substituent structure of RSt on the thermal and mechanical properties was studied with differential scanning calorimetry, dynamic mechanical thermal spectroscopy, and elongation testing. The glass‐transition temperature (T_g) of the copolymers increased with increasing RSt content, and the order of T_g was as follows: BSt > VN > MSt = St. A copolymer with p‐hydroxystyrene (HOSt) was successively synthesized by means of deprotection of the copolymer with BMSiOSt. The copolymer showed a much higher T_g than the other copolymers because of the hydrogen connection of its OH groups. The mechanical properties of the copolymer in the glass state, at a lower temperature than T_g, were almost independent of the nature of the RSt. The substituent of the St monomers affected the pattern of the stress–strain curve in the elongation testing in the amorphous state. An improvement in the shape memory effect was observed in poly(ethylene‐co‐BSt). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of silicone-modified vinyl acetate–acrylic emulsion copolymers

The triethoxyvinylsilane (TEVS) containing vinyl acetate (VAc)/2-ethylhexylacrylate (2-EHA) copolymers were prepared by emulsion copolymerization. The polymerization was performed with methacrylic acid (MAA) and auxiliary agents at 80 °C in the presence of ammonium peroxodisulfate (APS) as the initiator. Alkyl phenol ether sulfate and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of temperature, agitation speed, initiator and silicone concentrations on the properties of the silicone-modified VAc–acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (53%) and can be used in emulsion paints as a binder. The calculations of monomer conversion versus time histories and monomer conversion indicate that by increasing the TEVS concentration, the polymerization rate and the number of polymer particles decrease, respectively.     

Synthesis and properties of ethylene/styrene copolymers produced by metallocene catalysts

Ethylene/styrene copolymers were synthesized under constant polymerization conditions using six different metallocene catalysts activated with methylaluminoxane. For all the catalysts used, the activity and molecular weight of the copolymers produced decreased with the amount of styrene in the reactor feed, but the styrene content of the copolymers increased. Catalysts with carbon bridges and bulky ligands gave rise to copolymers with higher styrene content. As a result of the increased styrene content of the copolymer, the melting temperature decreased. This effect was ascribed to a decrease in the crystallinity of the copolymers. It was also found that lamellar thickness could be significantly diminished by the incorporation of comonomers. The copolymers showed a broad spectrum of mechanical properties as a function of the comonomer ratio. At low styrene contents, they behaved like typical semicrystalline thermoplastics, and at higher styrene contents, they exhibited the properties typical of elastomers. Of the catalysts tested, [rac‐ethylenebis(4,5,6,7‐tetrahydro‐1‐indenyl)]zirconium dichloride emerged as the most promising for the production of ethylene/styrene copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3420–3429, 2006     

Synthesis and characterization of novel dihydrobenzoxazine resins

Three dihydrobenzoxazines are synthesized from bisphenol A (BPA), 4,4′‐biphenol (BIP), and dicyclopentadiene phenol adduct (DCPD). Polydihydrobenzoxazine containing 4,4′‐biphenol (BIPDB) had the most rigid structure of the three and was found to possess the best mechanical and thermal properties. The glass transition temperature of BIPDB was 206°C, and that of BPA‐type polydihydrobenzoxazine (BPADB) and dicyclopentadiene type polydihydrobenzoxazine (DCPDDB) were 184 and 183°C, respectively. DCPDDB, with a rigid hydrophobic cycloaliphatic structure, was found to possess excellent properties such as low moisture absorption, low dielectric constant, low polarization. The resulted polymer from DCPDDB had a dielectric constant of 2.94U, which was better than that of polymers derived from BPA (3.31U), BIP (3.45U), and traditional phenolic resin (3.9–4.0U). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 342–347, 2006     

Synthesis and characterization of novel polyesterimides

A series of soluble novel polyesterimides was synthesized from diamines [a mixture of 2,2‐bis(4‐(4‐aminophenoxy)phenyl)propane (BAPP) with amine‐terminated polysiloxane (ATPS) in various mole ratios] and the ester‐group‐containing dianhydrides. The ester group containing dianhydrides in turn was synthesized by the transesterification reaction of trimellitic anhydride (TMA) with diacetate ester of hydroquinone (HQ), 4,4′‐dihydrophenyl (BP), 1,6‐hexanediol, or ethylene glycol. The resulted polyesterimides were characterized by using Fourier‐transform infrared spectroscopy, inherent viscosity, solubility, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The polyesterimides of BP and HQ had relatively high glass transition temperatures in the range of 214.7–227.2 and 195.7–210.5°C, respectively. The glass transitions decreased rather slowly with the increase in polysiloxane content. Thermal stability and the weight‐loss behavior of polyesterimides were studied by TGA. All polyesterimides of BP and HQ (BPI and HQI) showed no significant weight loss below 500°C in a N₂ environment, and the decomposition temperatures (T_d5%) of BPI and HQI were >520°C. Most polyesterimides were soluble in polar aprotic solvents and m‐cresol. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 730–738, 2004     

Synthesis and characterization of ABA triblock and novel multiblock copolymers from ethylene glycol,L‐lactide,and ϵ‐caprolactone

Three types of copolymers were synthesized and characterized. First, triblock ABA copolymers [where A is a homopolymer of ?‐caprolactone and B is poly(ethylene glycol)] were prepared by the ring‐opening polymerization of poly(ethylene glycol) with ?‐caprolactone in the presence of stannous octoate (Sn(Oct)₂). The spectral, thermal, and mechanical properties of one sample of these copolymers were studied, and it was discovered that these types of copolymers were more hydrophilic, possessed lower melting points, and had superior mechanical properties (greater toughness) than poly(?‐caprolactone). Second, triblock ABA copolymers [where A is a homopolymer of L ‐lactide and B is poly(ethylene glycol)] were prepared by the ring‐opening polymerization of poly(ethylene glycol) with L ‐lactide in the presence of Sn(Oct)₂. The mechanical properties of these copolymers were studied, and it was found that they were tougher and softer than poly(L ‐lactide). Third, novel ABA triblock copolymers [where A is a copolymer of ?‐caprolactone and L ‐lactide and B is poly(ethylene glycol)] were prepared, and ¹H‐NMR and ¹³C‐NMR spectra of these copolymers indicated a microblock structure for the two end blocks. The stress–strain behavior revealed low yields and high toughness for these copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2072–2081, 2002     

New polymeric materials for paper and textiles conservation. II. Grafting polymerization of ethyl acrylate/methyl methacrylate copolymers onto linen and cotton

In the preservation of Cultural Heritage items, the use of polymeric materials for the consolidation and protection of artifacts with historical and artistic value is widely accepted, except for cellulose‐based materials, since here there are no suitable products and appropriate application techniques. Grafting polymerization of acrylic monomers onto cellulose chains represents an innovative method of restoration for both artificially and naturally aged textiles. In this article, some results concerning the grafting polymerization of ethyl acrylate/ethyl methacrylate 75/25 and ethyl acrylate/methyl methacrylate/trifluoroethyl methacrylate 73/24.5/2.5 polymers onto linen and cotton are reported. The effectiveness of grafting polymerization as a method for textiles conservation is discussed. The consolidating and protective effects were investigated by evaluating the mechanical properties and the wetting behavior of the grafted samples, and comparing them with the original and aged substrates. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 90–99, 2007     

Synthesis and characterization of some aromatic polyimides

The diamine 2‐methyl‐1,3‐bis(4‐aminophenyloxy)benzene was prepared via a nucleophilic substitution reaction and was characterized with Fourier transform infrared, elemental analysis, and ¹H‐ and ¹³C‐NMR spectroscopy. The prepared diamine was also characterized with single‐crystal analysis. The geometric parameters of C₁₉H₁₈N₂O₂ were in the usual ranges. The dihedral angles between the central phenyl ring and the two terminal aromatic rings were 88.9 and 91.6°. The crystal structure was stabilized by N? H···N hydrogen bonds. The diamine was then polymerized with 3,3′,4,4′‐benzophenone tetracarboxylic acid dianhydride, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 3,4,9,10‐perylenetetracarboxylic acid dianhydride, and pyromellitic dianhydride by either a one‐step solution polymerization reaction or a two‐step procedure. These polymers had inherent viscosities ranging from 0.61 to 0.85 dL/gm. Some of the polymers were soluble in most common organic solvents even at room temperature, and some were soluble on heating. The degradation temperatures of the resultant polymers fell in the range of 260–500°C in nitrogen (with only 10% weight loss). The specific heat capacity at 200°C ranged from 1.0 to 2.21 J g^?1 K^?1. The temperatures at which the maximum degradation of the polymer occurred ranged from 510 to 610°C. The glass‐transition temperatures of the polyimides ranged from 182 to 191°C. The activation energy and enthalpy of the polyimides ranged from 44.44 to 73.91 kJ/mol and from 42.58 to 72.08 kJ/mol K, respectively. The moisture absorption was found in the range of 0.23–0.71%. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of the molecular weight on the thermal and mechanical properties of ethylene/norbornene copolymers

A series of ethylene‐norbornene copolymers were synthesized using Me₂Si(Me₄Cp)(NtBu)TiCl₂ as the metallocene catalyst and methylaluminoxane (MAO) as the cocatalyst, with the same molecular characteristics except the molecular weight, to evaluate its influence on the determination of the glass transition temperature (T_g). The polymers were characterized using wide‐angle X‐ray scattering, differential scanning calorimetry, microhardness measurements, and dynamic mechanical thermal analysis. The value of the T_g, for the same norbornene content and determined from the last three mentioned methods, increases significantly up to a limit of M_n about 6–10 × 10⁴ (g/mol). Above this value, T_g remains practically constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3358–3363, 2003     

High Tg and tough poly(butylene 2,5-thiophenedicarboxylate-co-1,4-cyclohexanedimethylene 2,5-thiophenedicarboxylate)s: Synthesis and characterization

The purpose of this study was to enhance the glass-transition temperature of poly(butylene 2,5-thiophenedicarboxylate) (PBTF). A series of poly(butylene-co-1,4-cyclohexanedimethylene 2,5-thiophenedicarboxylate)s (PBCTFs) were synthesized from 2,5-thiophenedicarboxylic acid, 1,4-cyclohexanedimethanol (CHDM), and 1,4-butanediol. CHDM can increase the chain rigidity and lead the β relaxation temperature shift to lower temperature. Consequently, PBCTFs showed not only the high glass-transition temperature, but also high elongations at break. PBTF was a crystalline polyester. However, differential scanning calorimetry and wide-angle X-ray diffraction results suggested PBCTFs were amorphous polyesters. Thermogravimetric analysis results indicated the thermal stability of copolyesters was gradually enhanced with increasing the CHDM content. When the CHDM content was 95 mol %, PBCTF95 exhibited high glass-transition temperature (69.2 °C), tensile strength (44.4 MPa), and elongation at break (205%). © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48634.     

Dynamic mechanical properties of three‐component composites (acrylic polymer/epoxy/SiO2) in the glass‐transition region

In previous studies, we reported the linear and nonlinear rheological properties of three‐component composites consisting of acrylic polymer (AP), epoxy resin (EP), and various SiO₂ contents (AP/EP/SiO₂) in the molten state. In this study, the dynamic mechanical properties of AP/EP/SiO₂ composites with different particle sizes (0.5 and 8 μm) were investigated in the glass‐transition region. The EP consisted of three kinds of EP components. The α relaxation due to the glass transition shifted to a higher temperature with an increase in the volume fraction (?) for the AP/EP/SiO₂ composites having a particle size of 0.5 μm, but the α relaxation scarcely shifted for the composite having a particle size of 8 μm as a general result. This result suggested that the SiO₂ nanoparticles that were 0.5 μm in size adsorbed a lot of the low‐glass‐transition‐temperature (T_g) component because of their large surface area. The AP/SiO₂ composites did not exhibit a shift in T_g; this indicated that the composite did not adsorb any component. The modulus in the glassy state (E′_g) exhibited a very weak &phis; dependence for the AP/EP/SiO₂ composites having particle sizes of 0.5 and 8 μm, although E′_g of the AP/SiO₂ composites increased with &phis;. The AP/EP/SiO₂ composites exhibited a peculiar dynamic mechanical behavior, although the AP/SiO₂ composites showed the behavior of general two‐component composites. Scanning electron microscopic observations indicated that some components in the EP were adsorbed on the surface of the SiO₂ particles. We concluded that the peculiar behavior of the AP/EP/SiO₂ composites was due to the selective adsorption of the EP component. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40409.     

Synthesis,characterization, and glass transition temperature of poly(styrene-b-butyl methacrylate) block copolymers by stable free radical polymerization

The synthesis of controlled polystyrenes with different molecular weights has been performed in the presence of 1-phenyl-1-(2,2,6,6-tetramethyl-1-piperidinyloxy)ethane (PETEMPO). The polystyrenes have served as macroinitiators for the formation of poly(styrene-b-butyl methacrylate) block copolymers. Using differential scanning calorimetry (DSC) it has been shown that all block copolymers synthesized do not present phase segregation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 14–21, 2001     

Epoxy-based divinyl ester resin/styrene copolymers: Composition dependence of the mechanical and thermal properties

Epoxy-based divinyl ester resins (DVER) were obtained by reacting diglycidyl ether of bisphenol A (DGEBA) with methacrylic acid (MA) and characterized by FTIR and ¹H-NMR spectroscopies and gel permeation chromatography (GPC). The densities and viscosities of the DVER in styrene (S) solutions were measured at different temperatures, 25, 40, and 60°C and compositions, 3.4 to 100% by weight of styrene. Dynamic mechanical measurements (DMA) and differential scanning calorimetry (DSC) were used to determine the glass transition temperatures of the homopolymers and the DVER/S copolymers: 20, 40, 60, and 80% by weight of styrene. The values obtained are in the range limited by the homopolymers glass transition, 100°C for polystyrene and 173°C for the cured DVER. The data were well fitted if two contributions to the glass transition are taken into account: the “linear copolymer” contribution (Fox eq.) and the “crosslinking” contribution (Nielsen model). Uniaxial static compression tests were carried out to determine the modulus, yield stress, and ultimate stress in samples with different compositions. All the mentioned properties decrease with an increase in the styrene concentration in the final copolymer. It was found that the volumetric contraction during curing increases with styrene concentration. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1059–1066, 1997     

Synthesis and characterization of propylene‐α‐olefin random copolymers with isotactic propylene sequence. II. Propylene–hexene‐1 random copolymers

A series of novel hexene‐1–propylene random copolymers with isotactic sequence of propylene was synthesized with a MgCl₂‐supported Cr(acac)₃ catalyst. The molecular weight distribution of copolymers and homopolymers was considerably narrower than that of typical polyolefins produced by heterogeneous Ziegler–Natta catalysts. The crystallizability of the copolymers having a propylene‐unit content of more than 50 mol % drastically decreased with decreasing propylene‐unit content, and the copolymers with a propylene content of less than 50 mol % were completely amorphous. In the present novel type of random copolymers with crystallizable and noncrystallizable units, a single glass transition was observed between pure polypropylene and polyhexene‐1, and a major component was found to govern the final morphology and the mechanical characteristics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2949–2954, 2004     

Synthesis and properties of poly(imide siloxane) block copolymers with different block lengths

Several poly(imide siloxane) block copolymers with the same bis(γ‐aminopropyl)polydimethylsiloxane (APPS) content were prepared. The polyimide hard block was composed of 4,4′‐oxydianiline and 3,3′,4,4′‐diphenylthioether dianhydride (TDPA), and the polysiloxane soft block was composed of APPS and TDPA. The length of polysiloxane soft block increased simultaneously with increasing the length of polyimide hard block. For better understanding the structure–property relations, the corresponding randomly segmented poly(imide siloxane) copolymer was also prepared. These copolymers were characterized by FT‐IR, ¹H‐NMR, dynamic mechanical thermal analysis, thermogravimetric analysis, polarized optical microscope, rheology and tensile test. Two glass transition temperatures (T_g) were found in the randomly segmented copolymer, while three T_gs were found in the block copolymers. In addition, the T_gs, storage modulus, tensile modulus, solubility, elastic recovery, surface morphology and complex viscosity of the copolymers varied regularly with increasing the lengths of both blocks. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of phthalonitrile resins from ortho‐linked aromatic and heterocyclic monomers

This article describes the synthesis and properties of phthalonitrile polymers prepared from three different ortho‐linked monomers, namely 2,2′‐bis(3,4‐dicyanophenoxy)biphenyl, 1,2‐bis(3,4‐dicyanophenoxy)benzene and 2,2′‐bis(3,4‐dicyanophenoxy)‐1,3,4‐oxadiazole. The resins exhibited a low complex viscosity, with a varying range of processing temperatures for all three systems. Thermogravimetric analysis showed that the synthesized polymers exhibited high thermal and thermo‐oxidative stability. The high char yields, which ranged from 64 to 69% at 900 °C under nitrogen atmosphere, and the high glass transition temperatures of the polymers indicated a high crosslinking density in the network structure. Dynamic mechanical measurements demonstrated that the fully cured monomer 2,2′‐bis(3,4‐dicyanophenoxy)‐1,3,4‐oxadiazole exhibited no change in glass transition temperature or in storage modulus up to 500 °C. © 2013 Society of Chemical Industry     

Preparation and properties of methyl methacrylate and fluoroacrylate copolymers for plastic optical fiber cladding

Copolymers of methyl methacrylate (MMA) and fluoroacrylate (FA), with different FA content (0–100 wt %), were prepared by bulk polymerization. The chemical structure was identified by ¹H‐NMR and other physical properties were measured by DSC, Abbé refractometer, X‐ray diffractometry, polarized optical microscopy, and DMA. The copolymers were confirmed as random copolymers by Fineman–Ross analysis and first‐order Markov statistics. Increasing the FA content from 0 to 100 wt % decreased the refractive index from 1.492 to 1.368. Copolymers with FA content higher than 70 wt % crystallized and led to low transparency and poor thermal properties. On the other hand, copolymers with FA content lower than 70 wt % was thermally stable (T_g was as high as 60°C) and transparent. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2082–2089, 2004