具有双阻带特性的新型超宽带天线研究

通过在天线上开设不同形状和尺寸的槽,设计和制作了一种新型的采用微带馈电且具有双阻带特性的平面超宽带天线。通过HFSS对天线仿真并分析,总结出了槽结构参数对天线阻带特性的影响规律。仿真和实测结果表明,除阻带外,天线在3.015~13.27频带上的VSWR小于2,相对带宽达126%,在3.25~3.6GHz、5.15~5.825 GHz具有良好的阻带特性,较好地避免了系统与Wimax及WLAN之间的干扰。该设计天线在工作频段内具有很好的辐射方向性和增益,满足超宽带通信的需求。     

具有双频陷波特性的超宽带印刷天线研究*

通过在超宽带印刷单极子天线上开设不同形状和尺寸的缝隙,设计了一种由共面波导馈电的,具有双频陷波特性的超宽带天线.并且通过对天线仿真结果的分析,总结出了缝隙结构参数对天线陷波特性的影响规律.仿真和实测结果表明,除陷波频带外,天线在3.1到10.6GHz频带上的VSWR小于2,在3.4-3.77GHz和4.91-5.87GHz频段上具有良好的陷波特性,较好地避免了系统与WiMAX及WLAN之间的干扰.在非陷波频段上天线具有较好的全向辐射特性.此外,通过对天线表面电流分布情况的详细分析,推导出了天线的等效电路结构.     

CPW-fed compact monopole antenna for dual-band WLAN applications

A compact CPW-fed monopole antenna is proposed for dual-band wireless local area network (WLAN) operations. The proposed antenna, which consists of two strips, has compact size of 20/spl times/15.5/spl times/1.6 mm/sup 3/ including the ground. The proposed antenna effectively covers both 2.4 GHz (2.4-2.484 GHz) and 5 GHz (5.15-5.825 GHz) bands. The measured peak gains are 1.3 dBi at 2.44 GHz and 2.8 dBi at 5.32 GHz.     

一种小型化超宽带MIMO天线设计

提出了一种基于槽天线的小型化、高隔离度的超宽带(Ultra Wideband, UWB)多入多出(Multiple-Input Multiple-Output, MIMO)天线.该MIMO天线由两个槽天线单元构成, 为了增加天线阻抗带宽, 每个槽天线单元由末端带有圆形贴片的微带线和末端为圆形的槽线两部分耦合馈电.采用在地板上开槽和方向图分集方法, 减少地板表面波和空中电磁波影响, 达到提高天线隔离度的目的.数值仿真和实验结果表明:该天线在3.1~11 GHz频段内满足端口反射系数|S₁₁| < -10 dB, 隔离度|S₁₂|在7~11 GHz频段内小于-25 dB, 在3.1~7 GHz频段内小于-16 dB, 并根据仿真和测试S参数计算了包络相关系数.     

平面小型化双陷波天线设计

本文设计了一种具有双频陷波特性的小型化平面单极子天线．该天线由开有π型与W型缝隙的辐射贴片和一对L型分支组成．L型分支的作用是能够激励额外谐振,从而增加阻抗带宽,π型和W型缝隙能够实现双陷波特性．该天线可以实现超过130％的带宽（2．77～13．62 GHz）,最大的特点是具有12×18×1．6 mm3的小型化尺寸．最终的仿真和测试结果显示其在整个超宽带频段内具有良好的陷波特性、增益和全向辐射特性．     

Compact Folded Monopole Antenna Excited by a Conductor‐Backed Coplanar Waveguide with Vias

A compact monopole antenna excited by a conductor‐backed coplanar waveguide (CBCPW) is developed for wireless USB dongle applications. The proposed antenna has a compact dimension of 14 mm × 47.4 mm × 3.5 mm, which is suitable for a USB dongle housing. A slotted elliptical patch and a CBCPW with vertical vias are employed to achieve a further size reduction and an improved impedance bandwidth. The measurement result demonstrates that the fabricated antenna resonates from 2.25 GHz to 10.9 GHz, which covers all of the important wireless communication bands, including WiBro (2.3 GHz to 2.4 GHz), Bluetooth (2.4 GHz to 2.484 GHz), WiMAX (2.5 GHz to 2.7 GHz and 3.4 GHz to 3.6 GHz), satellite DMB (2.605 GHz to 2.655 GHz), 802.11b/g/a WLAN (2.4 GHz to 2.485 GHz and 5.15 GHz to 5.825 GHz), and ultra‐wideband (3.1 GHz to 10.6 GHz) services. The radiation characteristics of the proposed antenna when attached to a laptop are tested to investigate the influence of the keypad and the LCD panel of the laptop.     

多频印刷单极子天线的设计

〗提出一种应用于2.4/5.2/5.8 GHz WLAN和2.5/3.5/5.5 GHz WiMAX共面波导印刷单极子天线。该天线结构紧凑,可以方便地植入无线通讯设备中,有较强的实用性。此天线由50 Ω的微带传输线通过共面波导馈电的方式对具有对称结构的蝶型贴片馈电。在设计中,通过开缝和添加倾斜微带条,使天线获得的阻抗带宽可以覆盖WLAN和WiMAX频段。天线的总体尺寸为30 mm×32 mm,其结构紧凑、便于集成和加工,适合无线通讯应用。     

一款低不圆度WLAN 双频天线的设计与实现

提出了一种改进型的应用于无线局域网的双频印刷单极子天线。该天线可以覆盖IEEE 802. 11a/ b/ g (2. 4 ~2. 484GHz,5. 15 ~5. 825GHz)频段标准,其回波损耗小于10dB 的阻抗带宽在2. 4GHz 频段可达290MHz(2. 28 ~2. 57GHz),在5GHz 频段可达5. 53GHz(4. 34 ~9. 87GHz)。另外,在工作频带内,还获得了良好的全向辐射方向图 和天线增益。该天线的总体尺寸为22mm×44mm,结构紧凑, 且具有不圆度低、成本低和易于集成等优点, 因此具有 十分良好的应用潜质。     

Printed Planar Antenna for Wideband Applications

A compact planar antenna operating at a frequency range of 3–16 GHz is presented for wideband applications. The antenna is composed of a square patch fed by a microstrip line and a partial ground plane with a rectangular slot. The proposed antenna is very easy to be integrated with microwave circuitry for low manufacturing cost. The flat antenna has a compact structure and the total size is 29 mm × 22 mm. The result shows that the measured impedance bandwidth (VSWR≤ 2) of the proposed antenna is 3.2–15.44 GHz, with a notch from 4.7 to 5.8 GHz. The effects of the structure parameters on impedance bandwidth are also investigated. Details of the proposed compact planar antenna design are presented and discussed.     

一种应用于WLAN/WiMAX的新颖的三分枝单极天线

提出了一种应用于WLAN/WiMAX的新颖的多分枝单极天线,天线有三个分枝,结构紧凑,其大小为26mm×24mm×1.6mm,加工出了天线并进行测试,测试结果表明天线具有良好的双波段工作特性,｜S11｜≤-10dB时对应中心频率2.47GHz和4.825GHz处带宽分别达4%和62.4%,覆盖WLAN的2.4/5.2/5.8GHz频段及WiMAX的3.5/5.5GHz频段,同时采用了接地板开槽技术以调整带宽,天线在上述频段有近似于全向辐射方向图。     

Design of a modified circular-cut multiband fractal antenna

This paper presents a modified circular-cut multiband fractal antenna with good radiation patterns designed for digital cellular system (DCS), personal communication system (PCS), 2.4/5.2/5.8 GHz wireless local area networks (WLAN) and 2.5/3.5/5.5 GHz worldwide interoperability for microwave access (WiMAX) applications simultaneously. Originally, the modified circular monopole antenna is designed to resonate at around 2.1 GHz and 3.6 GHz. After subtracting the circular iterative tree fractal structure, it can produce three other resonances at around 5.6 GHz, 6.47 GHz and 7.89 GHz. Besides, as the number of iterations increases, not only do the new frequency bands appear (it demonstrates the good self-similarity property of the proposed antenna), but also the operating bands shift from high frequency to low frequency (it shows the well space filling property). Furthermore, the proposed antenna owns a compact structure, which can achieve the 5.28 dBi of relative high gain. And the measured results are basically accordant to simulated results, which proves the effectiveness of the proposed antenna.     

Wideband CPW-Fed Spiral-Shaped Slot Antenna for Wireless Applications

A new compact design of CPW-fed wideband (WB) spiral-shaped slot antenna is proposed. The proposed antenna has a compact size with overall dimensions 37-33 mm and is fabricated on FR4 substrate with dielectric constant ? _r = 4.4 and thickness h = 1.6 mm. With the different length of the spiral-shaped slots, simulated and experimental results of the antenna are suitable for WB operations. The–10 dB bandwidth of the WB antenna from measurement is approximately 115.2% (2.36–8.53 GHz). The proposed antenna provides nearly omni-directional radiation characteristics. The new antenna configuration operates in several different bands: 2.4, 3.5, 5.2, 5.5, and 5.8 GHz covering 2.4/5.2/5.8 GHz WLAN bands and 2.5/3.5/5.5 GHz WiMAX bands. The results for S₁₁, far-field H- and E-plane radiation patterns and gain of the proposed antennas are presented and discussed. The agreement between measured results and full-wave simulation validates the feasible configuration of the proposed antennas.     

一种双阻带椭圆单极子UWB天线的设计

通过仿真与实际测试结合的方法,研究并设计了一种用于UWB通信的、具有双阻带特性的紧凑椭圆单极子天线。双阻带特性是通过在辐射单元上插入一个缝隙和在馈线上引入一共面波导谐振单元实现的。测试结果表明此天线在3.45~3.75 GHz(覆盖了WIMAX频段)和5~6 GHz(覆盖了5.15~5.85 GHz的WLAN频段)分别有两个阻带,此外,驻波系数在3.1~10.6 GHz UWB的范围内小于2。天线的辐射特性也近似于全向。天线的增益和传输函数也证实了天线能达到双阻带特性。     

一种小型化双频天线的设计与分析

提出了一种小型化宽频带双频天线的设计。该天线由一个E形微带贴片和一个偶极子天线组合而成,产生高低2个频率,且低频段带宽可控。仿真的-10dB阻抗带宽分别为83MHz(2.4～2.485GHz)和812MHz(5.1～5.912GHz)。能够覆盖IEEE802.11b/g(2.4～2.483GHz)和IEEE802.11a(5.15～5.825GHz)工作频段,并对仿真结果进行了分析。同时给出的设计双频段宽带小型化天线的方法,可以对高低2个频段分开设计,对工程实践有一定的指导意义。     

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual‐feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are 28 mm × 28 mm × 4 mm, which is the most compact size among the dual‐band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).     

Compact and contact quad-band (DVB-H UHF/L, WLAN 11a/b) antenna for PMP applications

The quad-band antenna, which is composed of two compact dual-band antennas, is presented for potable media player (PMP) applications. The antenna for the broadcasting dual-band (DVB-H UHF; 470 - 862 - MHz, L; 1452 - 1492 - MHz) is composed of a planar inverted F-shaped antenna with an input matching circuit. The antenna for the communication dual-band (WLAN 11b; 2.4 - 2.5 - GHz, 11a; 5.15 - 5.8 - GHz) is composed of a folded dipole antenna with enhanced mutual coupling. The proposed antennas are contact with the PMP case (?_r = 3.2) which is used as a substrate for size reduction and compact design.     

Compact dual-band bandstop filter using folded resonator

A compact dual-band bandstop filter composed of main transmission line and four folded resonators is presented. Through analyzing the structure of folded resonator, it is found that the main transmission line connected with two proposed folded resonators exhibits the characteristic of band-rejection. Simulated results show that the center frequency of stopband is 2.72 GHz. Then, through adding another pair of folded resonator; a compact dual-band bandstop filter is achieved. Simulated results demonstrate that transmission poles are induced to have better selectivity. Additionally, in order to explain the mechanism of proposed structure, the LC equivalent circuit, analysis of parametric effect and surface current distributions are given. Due to the folded structure, the filter dimensions are reduced and the adjustable stopband is another feature. By virtue of optimization, proposed structure is fabricated. Measured results agree well with the simulation.     

A Compact UWB and Bluetooth Slot Antenna for MIMO/Diversity Applications

A novel compact pattern diversity slot antenna for ultra‐wideband (UWB) and Bluetooth applications is presented. This antenna consists of two modified coplanar waveguides that feed staircase‐shaped radiating elements, wherein two different fork‐like stubs are placed at the 45° axis. The measured results show that this proposed antenna operates from 2.3 GHz to 12.5 GHz, covering Bluetooth, WLAN, WiMAX, and UWB. The performance of radiation patterns and the corresponding envelope correlation coefficient prove this antenna is suitable for MIMO/diversity systems. Also, the antenna's compact size makes it a good candidate for portable devices.     

应用于手机中的小型化WLAN双频天线设计

设计了一款适用于手机的小型化WLAN天线,尺寸为10 mm×35 mm,天线的主要结构为一个折叠型倒L-L结构.设计过程中采用了共面波导馈电（CPW）技术,有效地增加了天线的带宽.仿真结果表明,天线在2.45 GHz时覆盖了2.38 GHz ～ 2.688 GHz,5.2 GHz时覆盖了4.77 GHz～6 GHz,同时达到了IEEE 802.1 1a和IEEE 802.11 b/g标准.整体来说,天线尺寸小、频带宽,方向图性能良好.对天线进行了实物加工并进行了测试,结果显示仿真与实验结果吻合,均能覆盖所需频段.     

A novel Ultra WideBand monopole antenna with band-notched characteristics

A simple and compact microstrip-fed Ultra WideBand(UWB) printed monopole antenna with band-notched characteristic is proposed in this paper.The antenna is composed of a square ring with a small strip bar,so that the antenna occupies about 7.69 GHz bandwidth covering 3.11～10.8 GHz with expected band rejection from 5.12 GHz to 5.87 GHz.A quasi-omnidirectional and quasi-sym-metrical radiation pattern is also obtained.This kind of band-notched UWB antenna requires no ex-ternal filters and thus greatly simplifie...