Preparation and visible-light photocatalytic activity of In2S3/TiO2 composite

A novel In₂S₃/TiO₂ composite with visible-light photocatalytic activity was prepared by a chemical precipitation method and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope and UV–vis diffuse reflectance spectroscopy. Under both UV- and visible-light irradiation, the In₂S₃/TiO₂ composite shows good photocatalytic activity to degrade methyl orange, ascribed to the absorption of visible light by In₂S₃ sensitizer and enhanced separation of photoinduced electron–hole pairs in the composite semiconductors.     

Fabrication of carbon-modified TiO2 nanotube arrays and their photocatalytic activity

TiO₂ nanotube (TN) arrays were fabricated by an anodic oxidation process. Through a heat treatment of the as-fabricated TN arrays under a continuous Ar and acetylene flux, carbon-modified TN (C-TN) arrays were obtained. The as-fabricated catalysts were characterized by FE-SEM, HRTEM, XPS, Raman and UV-Vis spectra. Moreover, photocatalytic activity of the C-TN arrays was evaluated through the photodegradation of aqueous methyl blue. The experiments demonstrated that the C-TN arrays display an excellent photocatalytic activity. Under sunlight irradiation, the C-TN arrays are able to almost completely decompose the methylene blue pollutant of 1 × 10^− 5 M within 300 min.     

Characterization and photoactivity of TiO2 sols prepared with triethylamine

Using triethylamine as a surface protective agent, a transparent and pale yellowish TiO₂ sol had been prepared at 90 °C. This method was very different from the traditional methods, which produced titanium dioxide nanoparticles with anatase crystalline structure either at high acid condition or high temperature. X-ray diffraction (XRD) and transmission electron spectroscopy (TEM) demonstrated that the as-prepared TiO₂ sol nanoparticles with anatase crystalline structure were uniformly distributed, and the average size was 3 nm. X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectra showed that triethylamine was adsorbed on TiO₂ sol particles surface. FTIR spectroscopy noted that TiO₂ sol particles had the similar spectra with Degussa P25. Photoactivity of the as-prepared TiO₂ sol was studied by investigating the photodegradation of methyl violet in hydrosol reaction system under visible light irradiation.     

Solar photocatalytic degradation of 2-sec-butyl-4,6-dinitrophenol (DNBP) using TiO2/SiO2 aerogel composite photocatalysts

Silica aerogels and TiO₂/silica aerogel composite photocatalysts were synthesized by sol–gel technique at ambient pressure using orthosilioate and tetra-n-butyl titanate as precursors, respectively. The prepared composite photocatalysts were characterized by XRD, TEM, BET surface area, FT-IR and UV–vis absorption spectra. The results showed that the TiO₂/silica aerogel composite photocatalysts possess high surface area. The addition of silica aerogels inhibited the grain growth and phase transformation of anatase to rutile during calcination. The TiO₂/silica aerogel composite sample calcined at 500 °C with an optimal silica aerogel content of 7 wt.% afforded the highest photocatalytic activity. The photocatalytic degradation of 2-sec-butyl-4,6-dinitrophenol (DNBP) was investigated by using this novel TiO₂/silica aerogel composite photocatalyst under solar light irradiation. The effects of irradiation time, pH, catalyst concentration, temperature and initial DNBP concentration were examined as operational parameters. The optimal operational parameters were found as follows: pH as solution pH 4.82, 8 g L⁻¹ catalyst concentration, 20 °C, and 240 min irradiation time. The kinetics of DNBP degradation by TiO₂/silica aerogel composite fit well a pseudo-first-order kinetic model. The repeatability of photocatalytic activity was also tested. This study showed the feasible and potential use of TiO₂/silica aerogel composite photocatalysts in degradation of toxic organic contaminants.     

Preparation of metal ion (Fe and Ni) doped TiO2 nanoparticles supported on ZSM-5 zeolite and investigation of its photocatalytic activity

Metal ion doped TiO₂ nanoparticles supported on ZSM-5 zeolite (M-TiO₂/ZSM-5 composites, M = Fe or Ni) were synthesized by hydrothermal method. The prepared composites were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activities of composites were evaluated by degradation of yellow GX aqueous solution under ambient condition. Fe-TiO₂/ZSM-5 composite showed to be more efficient catalyst for degradation of dye molecules as compared with Ni-TiO₂/ZSM-5 and TiO₂/ZSM-5. Its higher photocatalytic activity is attributed to the effective separation of charge carriers that will be discussed in this paper in detail.     

Fabrication of photocatalytic heat-mirror with TiO2/TiN/TiO2 stacked layers

The photocatalytic heat-mirror based on TiO₂/TiN/TiO₂ stacked layers is prepared by reactive magnetron sputtering on quartz substrates under substrate-heating condition. We find that the addition of a thin Ti interlayer between the TiN and the outer TiO₂ layers drastically improves the heat-insulating performance. This type of stacked layer also exhibits higher photocatalytic activity for decomposition of acetaldehyde gas, compared with a TiO₂ single layer. The optical property of the TiN in TiO₂/TiN/TiO₂ stacked layers is the key not only revealing excellent heat-insulating effect but also improving the photocatalytic performance of the outer TiO₂ layers in the stacked layers.     

Preparation and characterization of Co-doped TiO2 materials for solar light induced current and photocatalytic applications

Different amounts of Co-doped TiO₂ powders and thin films were prepared by following a conventional co-precipitation and sol–gel dip coating technique, respectively. The synthesized powders and thin films were subjected to thermal treatments from 400 to 800 °C and were thoroughly investigated by means of X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive analysis with X-rays, FT-infrared, FT-Raman, diffuse reflectance spectroscopy, ultraviolet–visible spectroscopy, BET surface area, zeta potential, flat band potential measurements, band-gap energy, etc. The photocatalytic ability of the powders was evaluated by methylene blue (MB) degradation studies. The thin films were characterized by photocurrent and ultraviolet–visible (UV–Vis) spectroscopy techniques. The characterization results suggest that the Co-doped TiO₂ powders synthesized in this study consist mainly anatase phase, and possess reasonably high specific surface area, low band gap energy and flat band potentials amenable to water oxidation in photoelectrochemical (PEC) cells. The photocatalytic degradation of MB over Co-doped TiO₂ powders followed the Langmuir–Hinshelwood first order reaction rate relationship. The 0.1 wt.% Co-doped TiO₂ composition provided the higher photocurrent, n-type semi-conducting behavior and higher photocatalytic activity among various Co-doped TiO₂ compositions and pure TiO₂ investigated.     

Enhanced photocatalytic activity of mesoporous TiO2 with MgO coating

To improve the photocatalytic activity of TiO₂ on decomposing anionic surfactants, MgO-coated mesoporous TiO₂ was fabricated by evaporation induced self-assembly (EISA) combined with impregnation method. MgO was uniformly dispersed on the surface of TiO₂, which played the role of stabilizing the ordered mesostructure of TiO₂ and improving the adsorption of anion surfactants, while inhibiting the crystallization of TiO₂. The powders coated with 5 wt.% MgO showed the highest photocatalytic activity for the decomposition of sodium dodecylbenzenesulfonate-6 (DBS).     

Effects of HNO3 treatment of TiO2 nanoparticles on the photovoltaic properties of dye-sensitized solar cells

The effects of the nitric acid (HNO₃) treatment of TiO₂ nanoparticles on the photovoltaic properties of the dye-sensitized solar cell (DSSC) were investigated. The HNO₃ treatment enhanced the dispersion of TiO₂ particles, increased the surface area and porosity of the sintered TiO₂ films, increased the relative proportion of the Ti³⁺ state in the Ti 2p X-ray photoelectron spectroscopy spectrum, significantly increased the amount of adsorbed dye molecules on the TiO₂ electrode, and reduced the charge-transfer resistance at the TiO₂/dye/electrolyte interface. The short circuit photocurrent density (I_sc) was increased due to the increased amount of adsorbed dye molecules and the reduced charge-transfer resistance. The HNO₃ pre-treatment of TiO₂ particles improved the overall conversion efficiency of the DSSC by about 14%.     

Visible light absorption ability and photocatalytic oxidation activity of various interstitial N-doped TiO2 prepared from different nitrogen dopants

Nitrogen-doped TiO₂ was developed to enable photocatalytic reactions using the visible range of the solar spectrum. This work reports on the synthesis, characterisation and kinetic study of interstitial N-doped TiO₂ prepared by the sol–gel method using three different types of nitrogen dopants: diethanolamine, triethylamine and urea. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and UV–visible spectroscopy were used to analyse the titania. Different interstitial N-doped TiO₂ properties, such as absorption ability in the UV–visible light region, redshift in adsorption edge, good crystallisation and composition ratio of titania structures (anatase and rutile) could be obtained from different nitrogen dopants. Amongst investigated nitrogen precursors, diethanolamine provided the highest visible light absorption ability of interstitial N-doped TiO₂ with the smallest energy bandgap and the smallest anatase crystal size, resulting in the highest efficiency in 2-chlorophenol degradation. The photocatalytic activity of all N-doped TiO₂ can be arranged in the following order: TiO₂/diethanolamine > TiO₂/triethylamine > TiO₂/urea > un-doped TiO₂. The initial rate of 2-chlorophenol degradation using the interstitial N-doped TiO₂ with diethanolamine was 0.59 mg/L-min and the kinetic constant was 2.34 × 10⁻² min⁻¹ with a half-life of 98 min. In all cases, hydroquinone was detected as a major intermediate in the degradation of 2-chlorophenol.     

Enhancement of photocatalytic properties of TiO2 nanobelts through surface-coarsening and surface nanoheterostructure construction

In this work, heterostructures were obtained by uniformly assembling NiO nanoparticles on the surface-coarsened TiO₂ nanobelts through a precipitation process. The uniform assembling of NiO nanoparticles led to a large number of nano-p-n-junction heterostructures on the surface of the TiO₂ nanobelts, where NiO and TiO₂ are p- and n-type semiconductors, respectively. Compared with both pure NiO nanoparticles and TiO₂ nanobelts, NiO nanoparticles/TiO₂ surface-coarsened nanobelt heterostructured composite exhibited a greatly enhanced photocatalytic activity in the decomposition of a model dye compound methyl orange under ultraviolet light irradiation. It was argued that the nano-p-n-junctions effectively reduce the recombination of electrons and holes, thus resulting in enhanced photocatalytic property of the heterostructured composites. The better performance of the surface-coarsened nanobelts is due to the increased photo absorption and production of charge carriers, which renders the composites with further enhanced photocatalytic performance. The established approach allows the control of the nano-p-n junction heterostructure on the nanobelts, and hence, their photocatalytic effect.     

TiO2-SnO2 system for gas sensing—Photodegradation of organic contaminants

Catalytic photodegradation of organic contaminants by means of UV light has been demonstrated for gas sensors based on composites of TiO₂-SnO₂. Thin film resistive-type gas sensors of TiO₂-SnO₂ have been deposited at 350 °C by RF sputtering from a Ti-SnO₂ target with varying surface ratio of SnO₂/Ti. Photodegradation experiments of bromothymol blue by UV light have been performed by means of the optical spectrophotometry over the wavelength range extending from 300 nm to 600 nm. The influence of the UV illumination on the sensor response to 100-20,000 ppm of H₂ has been investigated in situ on motor oil contaminated sensors. It has been found that sequential exposures to UV light lead to a partial recovery of the sensor signal to hydrogen.     

Mn-doped TiO2 nanopowders with remarkable visible light photocatalytic activity

TiO₂ nanocrystalline powders with various Mn-doping levels were synthesized by the sol-gel process using tetrabutyl titanate and manganese nitrate as precursors. The crystal structure, morphology, doping concentration, optical absorption property, and elemental state of the obtained samples were analyzed. TEM results showed that the synthesized TiO₂ powders were anatase nanoparticles about 7 nm in size. EDX and XPS analyses proved the incorporation of Mn ions into the TiO₂ lattice. A remarkable red shift of the absorption edge was achievable by increased Mn content, leading to gigantically narrowed energy gap to permit absorption well into the infrared spectral region. The dramatic optical absorbance of the doped TiO₂ nanopowders in the visible spectral region led to strong photocatalytic activity under visible light illumination, which was observed by measuring the degradation of methylene blue. In contrast, little degradation was observed for the pure TiO₂ powder. The optimum Mn/Ti ratio was observed to be 0.2 at.% for photocatalytic applications.     

Mesoporous TiO2 thin films embedded with Au nanoparticles for the enhancement of the photocatalytic properties

Mesoporous TiO₂ thin films were prepared by hydrothermal-oxidation of titanium metal thin films, which were obtained by DC magnetron sputtering technique. Gold nanoparticles, which were prepared by reduction of HAuCl₄, were embedded into the holes of the mesoporous TiO₂ films by capillary method followed by annealing in air up to 400 °C. The size of pore of TiO₂ films is about 100 nm and that of Au nanoparticles is about 10 nm in average. The morphology of the films was analyzed by field emission scanning electron microscope (FE-SEM) and scanning probe microscopes (SPMs). Subsequently, the photocatalytic performances of the obtained nanosystems in the decomposition of methylene blue solution are discussed. The obtained results show that the dispersion of Au nanoparticles on the mesoporous TiO2 matrix will help enhancing the photocatalytic activity with respect to pure TiO₂ under visible light irradiation.     

Photo-catalytic degradation of toxic dye amaranth on TiO2/UV in aqueous suspensions

The photo-catalytic degradation of an azo dye − Amaranth (AM) - has been investigated in TiO₂/UV aqueous suspensions. The results obtained from the experiments during H₂O₂/TiO₂ addition show that the highest decolorization rate is provided by the combination of (UV + TiO₂ + H₂O₂). The decolorization efficiencies were 17%, 26%, 38% and 64% in the runs UV, UV + H₂O₂, UV + TiO₂ and (UV + TiO₂ + H₂O₂) after approximately 100 min illumination periods, respectively. The observed dye degradation rates followed pseudo-first order kinetics with respect to the substrate concentration under the experimental conditions used. Different experimental conditions, such as temperature, pH and presence of electron acceptor were investigated. The temperature effect was investigated at the range of 293-313 K and it was observed that decolorization rate increased by the increase in temperature. Chemical oxygen demand and dye absorbance of the photodegraded dye solution substantially decreased. Effect of pH was also investigated and it was observed that the lower the pH the higher the degradation. In addition, an enhancement in the photodegradation rate was observed by the addition of hydrogen peroxide as an electron acceptor. The adsorption trends of Amaranth at various initial concentrations followed the Langmuir isotherm trend. This work adds to the global discussion on the role of the advanced oxidation processes in water treatment.     

Structural investigations on TiO2 and Fe-doped TiO2 nanoparticles synthesized by laser pyrolysis

Undoped and Fe-doped TiO₂ nanopowders with Fe/Ti (atomic ratio) precursor concentration ranging from 7% up to 25% have been prepared by the IR laser pyrolysis technique. A sensitized mixture of TiCl₄ and Fe (CO)₅ was used as titanium and iron precursor, respectively. Reference undoped titania samples with a major concentration of anatase phase (about 90%) were obtained by the same technique by using very high flows of the oxidizing agent (air). The effects of the iron-dopant concentration on the essential structural properties of the resultant powders such as the phase formation, the crystallinity, the average particle size and distributions were systematically investigated by X-ray diffraction, Raman spectroscopy and transmission electron microscopy. The decrease of the TiO₂-anatase crystalline phase, the simultaneous increase of the amorphous phase and the decrease in size of particle mean diameter appear as main effects induced by the Fe-dopant concentration.     

Microstructure and photocatalytic activity of mesoporous TiO2 film coated on an aluminum foam

A TiO₂ film was synthesized via a surfactant assisted sol-gel process and dip-coated on the surface of an open-celled aluminum foam. The film shows a typical mesoporous structure composed of anatase crystalline grains with the average size of 10 nm, and has the thickness of about 3.5 μm as well as the BET surface area of 78.1 m²/g. It exhibits high photocatalytic efficiency toward the decomposition of formaldehyde at continuous flow mode. The relatively small grain size of TiO₂ and relatively thick mesoporous structure, which is favorable for high photochemical activity and the mass transfer of the reactants, should be responsible for the properties.     

Molecular recognitive photocatalytic decomposition on mesoporous silica coated TiO2 particle

Mesoporous silica coated titania exhibited a substrate selective photocatalytic reaction; 4-nonylphenol and phenol were decomposed while nonane was not decomposed by the UV irradiation to their aqueous mixture.     

Solar photocatalytic degradation of isoproturon over TiO2/H-MOR composite systems

The photocatalytic degradation and mineralization of isoproturon herbicide was investigated in aqueous solution containing TiO₂ over H-mordenite (H-MOR) photocatalysts under solar light. The catalysts are characterized by X-ray diffraction (XRD), UV–Vis diffused reflectance spectra (UV–Vis DRS), Fourier transform-infra red spectra (FT-IR) and scanning electron microscopy (SEM) techniques. The effect of TiO₂, H-MOR support and different wt% of TiO₂ over the support on the photocatalytic degradation and influence of parameters such as TiO₂ loading, catalyst amount, pH and initial concentration of isoproturon on degradation are evaluated. 15 wt% TiO₂/H-MOR composite is found to be optimum. The degradation reaction follows pseudo-first order kinetics and is discussed in terms of Langmuir–Hinshelwood (L–H) kinetic model. The extent of isoproturon mineralization studied with chemical oxygen demand (COD) and total organic carbon (TOC) measurements and 80% mineralization occurred in 5 h. A plausible mechanism is proposed based on the intermediates identified by liquid chromatography–mass spectroscopy (LC–MS).     

Study of the deposition parameters and Fe-dopant effect in the photocatalytic activity of TiO2 films prepared by dc reactive magnetron sputtering

The reactive magnetron sputtering method was used to prepare pure and Fe-doped titanium dioxide thin films. The films were deposited onto microscope glass slides and polycarbonate plates at different total pressure and Fe-doping concentrations. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and UV-visible spectroscopy (UV). For glass substrates a polycrystalline TiO₂ structure was verified with X-ray diffraction, which showed typical characteristic anatase reflections. An iron phase appeared in the highly Fe-doped samples. The absorption edges of the Fe-doped TiO₂ films shifted to visible region with increasing concentration of iron. For the polycarbonate substrate an amorphous TiO₂ structure was revealed for all deposition conditions. The effects of different Fe-doping and total pressure levels on the photocatalytic activity were obtained by the degradation rates of Rhodamine-B (RoB) dye under UV light irradiation. For the deposition conditions considered in this study the highest photodegradation rates were achieved for films deposited on the polymer substrates. Of these overall highest rates was achieved for deposition at 0.4 Pa and without doping. However, for both substrates, films prepared at the particular total pressure of 0.5 Pa and a low iron concentration showed better photocatalytic activity than the pure TiO₂ films prepared under the same deposition parameters. On the contrary, the photocatalytic degradation rates of RoB on the highly Fe-doped TiO₂ films decreased strongly.