Femtosecond near-field scanning optical microscopy study of molecular thin films

A near-field scanning optical microscope has been combined with a two-colour time-resolved pump-probe measurement system. It has a noise-equivalent transmittance change of 5.0 × 10⁻⁵ for a probe pulse with an intensity of 30 nW. The system has been used for evaluating molecular thin films that have a domain structure, particularly for observing a gate action of the single domains. The results include key features to understand an origin of the domains and suggest that the film composition is uniform over a distance of several micrometres.     

Optical microcantilever consisting of channel waveguide for scanning near-field optical microscopy controlled by atomic force

We develop a novel optical microcantilever for scanning near-field optical microscopy controlled by atomic force mode (SNOM/AFM). The optical microcantilever has the bent channel waveguide, the corner of which acts as aperture with a large tip angle. The resonance frequency of the optical microcantilever is 9 kHz, and the spring constant is estimated to be 0.59 N/m. The optical microcantilever can be operated in contact mode of SNOM/AFM and we obtain the optical resolution of about 200 nm, which is as same size as the diameter of aperture. We confirm that the throughput of optical microcantilever with an aperture of 170 nm diameter would be improved to be more than 10⁻⁵.     

Coaxial probes for scanning near-field microscopy

This paper deals with the development of coaxial aperture tips integrated in a cantilever probe for combined scanning near-field infrared microscopy and scanning force microscopy. A fabrication process is introduced that allows the batch fabrication of hollow metal aperture tips integrated on a silicon cantilever. To achieve the coaxial tip arrangement a metal rod is deposited inside the hollow tip using the focused ion beam technique. Theoretical calculations with a finite integration code were performed to study the transmission characteristics of coaxial tips in comparison with conventional aperture probes. In addition, the influence of the geometrical design parameters of the coaxial probe on its optical behaviour is investigated.     

Photoconductive imaging in a photon scanning tunnelling microscope capable of point-contact current sensing using a conductive fibre probe

A photoconductive photon scanning tunnelling microscope was developed to investigate the point-contact photoconductive properties of condensed matter. In order to detect the current and the optical signal at a local point on a surface, we coated the edge of a bent type fibre probe with indium tin oxide. Thus it was possible to measure both photocurrent and optical property with subwavelength resolution. The performance of the novel microscope was evaluated by analysing an organic thin film of copper phthalocyanine (CuPc), which is known to be an efficient photoconductive material. Photocurrent and current–voltage characteristics were observed at the local point on the CuPc thin films. Furthermore, photoconductive images were obtained with topography and near-field optical imaging using this system. The photoconductive PSTM shows potential in various areas of future optics and electronics.     

Imaging of optical disc using reflection-mode scattering-type scanning near-field optical microscopy

A phase-change optical disc was observed using a reflection-mode scattering-type scanning near-field optical microscope (RS-SNOM). In an a.c.-mode SNOM image, the 1.2 μm × 0.6 μm recording marks were successfully observed although the data were recorded on the groove. In contrast, no recording marks could be resolved in a d.c.-mode SNOM image. These results are in good agreement with those from a numerical simulation using the finite difference time domain method. The resolution was better than 100 nm with a.c.-mode SNOM operation and the results indicate that recording marks in phase-change optical media can be directly observed with the RS-SNOM.     

The tetrahedral tip as a probe for scanning near-field optical microscopy at 30 nm resolution

The tetrahedral tip is introduced as a new type of a probe for scanning near-field optical microscopy (SNOM). Probe fabrication, its integration into a scheme of an inverted photon scanning tunnelling microscope and imaging at 30 nm resolution are shown. A purely optical signal is used for feedback control of the distance of the scanning tip to the sample, thus avoiding a convolution of the SNOM image with other simultaneous imaging modes such as force microscopy. The advantages of this probe seem to be a very high efficiency and its potential for SNOM at high lateral resolution below 30 nm.     

A scanning near-field optical microscope having scanning electron tunnelling microscope capability using a single metallic probe tip

A new microscope system that has the combined capabilities of a scanning near-field optical microscope (SNOM) and a scanning tunnelling microscope (STM) is described. This is achieved with the use of a single metallic probe tip. The distance between the probe tip and the sample surface is regulated by keeping the tunnelling current constant. In this mode of operation, information about the optical properties of the sample, such as its refractive index distribution and absorption characteristics, can be disassociated from the information describing its surface structure. Details of the surface structure can be studied at resolutions smaller than the illumination wavelength. The performance of the microscope is evaluated by analysing a grating sample that was made by coating a glass substrate with gold. The results are then compared with the corresponding SNOM and STM images of the grating.     

Nano-slit probes for near-field optical microscopy fabricated by focused ion beams

The near-field probes described in this paper are based on metallized non-contact atomic force microscope cantilevers made of silicon. For application in high-resolution near-field optical/infrared microscopy, we use aperture probes with the aperture being fabricated by focused ion beams. This technique allows us to create apertures of sub-wavelength dimensions with different geometries. In this paper we present the use of slit-shaped apertures which show a polarization-dependent transmission efficiency and a lateral resolution of < 100 nm at a wavelength of 1064 nm. As a test sample to characterize the near-field probes we investigated gold/palladium structures, deposited on an ultrathin chromium sublayer on a silicon wafer, in constant-height mode.     

Tapping-mode tuning-fork near-field scanning optical microscopy of low power semiconductor lasers

The newly developed inverted tapping-mode tuning-fork near-field scanning optical microscopy (TMTF-NSOM) is used to study the local near-field optical properties of strained AlGaInP/Ga_0.4In_0.6P low power visible multiquantum-well laser diodes. In contrast to shear-force mode NSOM, TMTF-NSOM provides the function to acquire the evanescent wave intensity ratio | I (2ω)|/| I (ω)| image, from which the evanescent wave decay coefficient q can be evaluated for a known tapping amplitude. Moreover, we probe the near-field stimulated emission spectrum, which gives the free-space laser light wavelength λ_o and the index of refraction n _r of the laser diode resonant cavity. Once q , λ_o, and n _r are all measured, we can determine the angle of incidence θ_o of the dominant totally internally reflected waves incident on the front mirror facet of the resonator. Determination of such an angle is very important in modelling the stability of the laser diode resonator.     

Spectroscopy with scanning near-field optical microscopy using photon tunnelling mode

We have demonstrated Raman spectroscopy using scanning near-field optical microscopy (SNOM). Photon tunnelling mode was employed, in which the sample is illuminated using an attenuated total reflection (ATR) configuration and the evanescent wave perturbed by the sample is picked up by a sharpened optical fibre probe. By this experimental arrangement Raman scattering from the optical fibre probe was greatly reduced, therefore we were able to excite the sample using more intense laser light compared to the illumination mode SNOM. Raman spectra of copper phthalocyanine (CuPc) were obtained in the off-resonance condition and without using surface-enhanced Raman scattering (SERS).     

A versatile multipurpose scanning probe microscope

A combined scanning probe microscope has been developed that allows simultaneous operation as a non‐contact/tapping mode atomic force microscope, a scattering near‐field optical microscope, and a scanning tunnelling microscope on conductive samples. The instrument is based on a commercial optical microscope. It operates with etched tungsten tips and exploits a tuning fork detection system for tip/sample distance control. The system has been tested on a p‐doped silicon substrate with aluminium depositions, being able to discriminate the two materials by the electrical and optical images with a lateral resolution of 130 nm.     

Domain formation in thin lipid films probed with near-field scanning optical microscopy

High-resolution near-field scanning optical microscopy (NSOM) fluorescence and topographic images of l -α-dipalmitoylphosphatidylcholine (DPPC) monolayers doped with a fluorescent dye are presented. DPPC monolayers are deposited onto mica substrates from the air–water interface at several surface pressures using the Langmuir–Blodgett technique. Sub-diffraction limit phase domain structures are observed in both fluorescence and topographic NSOM images of the lipid films. The morphology of the resulting monolayers depends strongly on the surface pressure and composition of the subphase used in the film transfer. Mechanisms for lipid domain formation and growth are discussed.     

Optoelectronic detector probes for scanning near-field optical microscopy

A brief explanation of the optoelectronic probe concept and a comparison between the implementation of passive waveguide probes and optoelectronic probes in scanning near-field optical microscopy (SNOM) is presented. The first probe realizations using cleaved semiconductor crystals and the work at present in progress using microfabricated Si pyramids are described. These crystals with evaporated metal electrodes forming a slit aperture with subwave-length dimensions work as metal–semiconductor–metal photodetectors. Their optical detection behaviour is investigated by measuring the intensity distribution of a laser focal point. Measurements where the external bias voltage is changed show that it is possible to modify the detection behaviour of the device because of the varying depletion widths. The last part of the article describes a concept where pyramidal probes should function simultaneously as sensors for scanning force microscopy (SFM) to measure topography and as optoelectronic probes for scanning near-field optoelectronic microscopy (SNOEM).     

Magnetic domain imaging with a scanning near-field optical microscope using a modified Sagnac interferometer

We report on the combination of a scanning near-field optical microscope and a modified Sagnac interferometer for magnetic-domain imaging in the reflection mode. The Sagnac interferometer is used for detection of the magneto-optical Kerr effect. Since the interferometer is inherently insensitive to polarization changes caused by topography effects, magnetic-domain imaging is not limited to samples with flat surfaces. In this way, it is possible to image magnetic bits written on the tracks of a magneto-optical disc that has a rather pronounced surface profile.     

散射型近场扫描光学显微镜的探针振动参数优化研究

基于原子力显微镜平台设计了可见-近红外波段的散射型近场扫描光学显微镜,通过理论模型计算和实验测量,分析了散射探针振动的调制振幅和扫描反馈幅值对近场信号的影响。研究表明:与探针针尖尺寸相近的调制振幅有利于抑制背景散射噪声及优化近场信号的信噪比;当探针扫描反馈幅值与自由空间调制振幅之比大于90%时,可基本消除探针扫描过程中非简谐振动对近场成像测量的影响。     

Imaging of various surface properties of fluorescently labelled phospholipid Langmuir–Blodgett films with a combined scanning probe microscope

We present results of phase separation of a single-component system of 1,2-dihexadecanoyl- sn -glycero-3-phospho-[ N -(4-nitrobenz)-2-oxa-1,3-diazolyl]ethanolamine in which a liquid-condensed (LC) phase co-exists with a liquid-expanded (LE) phase. Domain formation in the co-existence region was studied using a newly developed combined scanning near-field optical microscope–atomic force microscope (SNOM–AFM). We demonstrate for the first time that the topographic, friction, fluorescence and surface potential distributions for a phase-separated single-component Langmuir–Blodgett film between the LE and LC phases can be simultaneously observed using the SNOM–AFM with a thin-step etched optical fibre probe.     

Plasmon-coupled tip-enhanced near-field optical microscopy

Near the cut‐off radius of a guided waveguide mode of a metal‐coated glass fibre tip it is possible to couple radiation to surface plasmons propagating on the outside surface of the metal coating. These surface plasmons converge toward the apex of the tip and interfere constructively for particular polarization states of the initial waveguide mode. Calculations show that a radially polarized waveguide mode can create a strong field enhancement localized at the apex of the tip. The highly localized enhanced field forms a nanoscale optical near‐field source.     

Nanoscopic observation of a gold nanoparticle-conjugated protein using near-field scanning optical microscopy

This study describes a single gold nanoparticle (AuNP)-based observation of biomolecular interaction using a near-field scanning microscope (NSOM) in transmission mode. To observe streptavidin molecules, a glass surface was first patterned with a micro-scale line of (3-aminopropyl)trimethoxysilane (APTMS) by micro-contact printing (μCP) with a subsequent reaction of N-hydroxysuccinimide (NHS)-biotin. The AuNP-conjugated streptavidin was then applied to the biotin-modified glass surface and NSOM was employed to detect the resulting specific interaction between streptavidin and biotin on the glass surface. Using the optical and topological images generated from the NSOM analysis, the interaction could be observed at the nanoscopic scale. This study demonstrates that the NSOM is a powerful tool for the detection of protein interactions at the nanoscopic level when the protein is conjugated with AuNPs.