智利纪行

智利以铜著称,是中国铜业关注的地方.尽管北京与智利首都圣地亚哥的距离是全球各国首都之间最远的两个点,但还是有一批又一批的考察团远渡重洋来到这个神秘的国度. 2008年4月,我随山东方圆集团组成的考察组从北京启程,经过两次转机与航行到达地球另一面的圣地亚哥.这是一次行程长达两万多公里,历时近36个小时,横跨了欧亚大陆、穿越非洲大陆、掠过大西洋、赤道线和南美洲的漫长旅行,再加上智利境内的考察航程,往返的行程累计起来可以绕地球一周了!     

汽车废料的回收：分类、切碎和分离

报废汽车的大规模机械处理,开始于美国,改进于欧洲.美国报废汽车的回收,重点放在大量回收上;而欧洲的发展方向则是处理的最佳化,以提高回收物质的品位和回收率.欧洲委员会(EC)的法规和中国金属消费量的快速增长影响着美国和欧盟的技术发展.在未来,自动切碎机渣的机械处理将增多,成本将降低.     

阿基米得螺线系数选择对模拟钛弯管推扩成形的影响

采用MSC公司的Superform软件对不同阿基米得螺线系数下的热推扩进行了模拟.扩径段采用了3种不同的系数并分析了不同系数下对热推扩成形弯管的影响.结果表明:扩径变形段中心轴线采用曲率半径渐变的阿基米得螺线,有利于管坯凹面金属充分向凸面流动,避免了传统弯曲变形内侧受压增厚,外侧受拉减薄;阿基米得螺线系数a≤0.9时,环向厚度差大;a≥l.3时,容易出现起皱和45°剪切变薄.本试验范围内,a值取1.0最佳.     

盲孔套料切断一例

针对大直径内孔套料料芯的切断及取出这一难题,介绍了一种套料切断装置的结构,动作原理,该装置采用轴向移动的推杆,通过铰链推动刀头作圆弧摆动,实现对料芯的圆弧切断,使用结果表明该装置效率高,性能稳定、可靠,加工出的断面表面质量较高。     

客户关系改善活动

阐述了塑件生产企业的客户关系改善活动研究现状,解决问题的步骤及基于使用描述、分析、量化、格式化等工具,从而提供解决问题的方向,为同类企业提供参考与借鉴.     

国外废金属的主要分布区域

国外废金属主要分布在工业发达国家.按产生分布地区划分,大体可分为北美地区(美国、加拿大),欧洲地区(欧共体),东南亚地区(日本、韩国、台湾),俄罗斯及澳洲几大部分.     

调解的精髓在于双赢——中国国际商会调解中心为再生企业排忧解难

1987年,伴随着国际贸易、国际投资和国际经济合作业务的持续增长,各种商事纠纷和贸易摩擦的不断增加,中国贸促会成立了第一家商事调解机构--北京调解中心2000年北京调解中心正式更名为中国贸促会/中国国际商会调解中心. 中国贸促会/中国国际商会调解中心秉承"以和为贵"、"促进双赢"的调解理念,以调解的方式,独立公正地帮助中外当事人解决了大量的商事争议,成为中国商事调解领域一支最重要的社会力量.其现有中外籍在册调解员300 余名,有41家贸促会系统地方调解中心遍布在全国各地,形成了一个庞大的调解网络.整个调解网络的受案量已达 6 000余件,调解成功率达到80%.调解当事人涉及50多个国家和地区.     

梦醒在开始的地方再生产业从风雨迷茫中一路走来

资源再生、循环经济在今天可谓风光无限:国家大力提倡,企业日益重视,再生产业吸引了全社会的目光.但在从新中国成立到改革开放后二十年的时间里,资源再生还是一个没有独立构成的行业,从业人员也往往因为每天与"破烂"为伍而被人看不起.     

2007年中国机床工具行业十大新闻

1. 中央和地方省市主要领导频繁视察机床行业企业,国家为数控机床产业发展创造了空前良好的发展环境. 胡锦涛、吴邦国、温家宝、贾庆林、李长春等党和国家领导人以及辽宁、黑龙江、山东、江苏、云南、湖北、广东、陕西、浙江、天津、重庆等省市主要领导相继视察了机床工具厂和数控系统厂.各级领导频繁视察,为数控机床产业的发展创造了空前良好的发展环境.     

透析营销失败的10大原因

经验主义,没有创新 　　一些企业或个人成功后,总是喜欢用过去的思路经营新的品种.殊不知任何新品都有差异性,他们的消费对象、产品的核心卖点及表现力均是不同的,经验主义很容易使产品销售走弯路,甚至导致营销失败.作为老产品,包装也要常更新,但要沿袭原有的核心记忆点与要素,才能使市场趋于稳定,甚至增长.……     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

The Mirror with Patterns of Auspicious Animals and Grapes——Exquisite cast mirror and the technology of surface tin-enrichment by rubbing-in and infiltration of tin-rich powder

<正>Bronze mirrors were used by the Chinese people before the introduction of the glass mirror.Only after it was replaced by the glass mirror did the bronze mirror gradually retreat from people's lives.Different styles of bronze mirrors were made in different historical periods,particularly in the Warring States Period,the Han and Tang Dynasties,which were the three peaks of the development of bronze mirror arts in ancient China.The casting techniques were exquisite.The surface of the bronze mirror was smooth and bright enough to reflect one's image,and there were scarcely any casting defects on the mirror surface.On the back of the bronze mirror,there were rich depictions of Arts and Humanities,and the ornamentations were also     

The 9th China International Diecasting Congress & Exhibition

The 9th China International Diecasting Congress ＆ Exhibition was held on July 22-24, 2014 at Shanghai New International Expc Centre. This exhibition was the most successful over the years, with over 6890 visitors and 155 exhibitors, and the exhibition area increased by 30% from 9,500 square meters in 2012 to 12340 square meters. Die casting enterprises from a total of 24 countries and regions, including China mainland, Chinese Taiwan and Hong Kong, South Korea, Japan, Germany, India, Thailand, Malaysia, the United States, Russia, Australia, Iran, Ukraine, Brazil, Colombia, Singapore, Austria, Canada, Croatia, France, Turkey, United Kingdom, Vietnam, attended the congress and exhibition.     

Introduction of the Fluid Control Engineering Institute of Kunming University of Science and Technology

正The Fluid Control Engineering Institute of Kunming University of Science and Technology was set up in 1996.The researches of institute concentrate on electro-hydraulic(pneumatic)servo/proportional control and hydromechatronics.The Institute is committed to research and development of electro-hydraulic control of high-end technical equipment in ferrous metallurgy refining produc-     

RARE METALS Volume Contents

正~~     

Antimony Induced Crystallization of Amorphous Silicon

Antimony induced crystallization of PVD (physics vapor deposition) amorphous silicon can be observed on sapphire substrates. Very large crystalline regions up to several tens of micrometers can be formed. The Si diffraction patterns of the area of crystallization can be observed with TEM (transmission electron microscopy). Only a few and much smaller crystals of the order of 1μm were formed when the antimony layer was deposited by MBE (molecular beam epitaxy) compared with a layer formed by thermal evaporation. The use of high vacuum is essential in order to observe any Sb induced crystallization at all. In addition it is necessary to take measures to limit the evaporation of the antimony.     

A CUMULATIVE FATIGUE DAMAGE RULE UNDER THE ALTERNATIVE OF CORROSION OR CYCLIC LOADING

Fatigue damage increases with the applied loading cycles in a cumulative manner and the material deteriorates with the corrosion time. A cumulative fatigue damage rule under the alternative of corrosion or cyclic loading was proposed. The specimens of aluminum alloy LY12-CZ soaked in corrosive liquid for different times were tested under the constant amplitude cyclic loading to obtain S-N curves. The test was carried out to verify the proposed cumulative fatigue damage rule under the different combinations among corrosion time, loading level, and the cycle numbers. It was shown that the predicted residual fatigue lives showed a good agreement with the experimental results and the proposed rule was simple and can be easily adopted.