Isospecific polymerization of styrene with supported nickel acetylacetonate/methylaluminoxane catalysts

Summary The polymerization of styrene with catalysts based on Ni(acac)₂ supported on SiO₂ and Al₂O₃ was investigated. Using catalysts based on MAO supported on silica, a highly isotactic polystyrene was obtained. Nevertheless, the Al₂O₃-supported catalyst can promote isospecific polymerization activated by common. alkyl aluminum compounds even by any prior support treatment with MAO. Received: 3 March 1998/Revised version: 14 April 1998/Accepted: 14 April 1998     

Polymerization of ethylene by chromium acetylacetonate/methylaluminoxane catalyst system

Summary The present paper deals with polymerization of ethylene by chromium acetylacetonate - Cr(acac)₃ - activated by alkylaluminium, e.g. Al(C₂H₅)₃ or Al(i-C₅H₉)₃, or methylaluminoxane (MAO). The influence of polymerization parameters on catalyst performance, such as Al/Cr mole ratio, temperature, aging time, type of cocatalyst, was investigated. High activities were obtained only when MAO was the cocatalyst. The polymers were characterized by size exclusion chromatography (SEC) and differential scanning calorimetry (DSC) analyses. Received: 11 September 1997/Revised version: 5 January 1998/Accepted: 20 March 1998     

Copolymerization of styrene and butadiene with nickel compounds–methylaluminoxane catalysts

Copolymerization of styrene (St) and butadiene (Bd) with nickel(II) compound (NiX₂) in combination with methylaluminoxane (MAO) was investigated at the monomer feed ratio of 1:1. Copolymerization of St and Bd induced with NiX₂–MAO catalysts (X = acac, OCOC₆H₅, OCOC₁₈H₃₅, Cl, Cp) gave copolymers with high cis‐1,4 contents of Bd units. The St and cis‐1,4 units of the Bd units in the copolymer were not significantly affected by the X group of NiX₂, although the copolymer yields depended on the substituent. The copolymer yields depended on the solvent used for the copolymerization with the Ni(acac)₂–MAO catalyst; an aromatic hydrocarbon was more favourable than a non‐aromatic hydrocarbon. The effects of triphenylphosphine (TPP) and trifluoroacetic acid (TFA) on copolymerization of St and Bd with the Ni(acac)₂–MAO catalyst were seen the microstructure of Bd units in the copolymer. © 2001 Society of Chemical Industry     

Copolymerization of 2,5-dimethyl-3-vinylthiophene with methyl methacrylate,styrene and isobutyl methacrylate

Summary The title vinyl thiophene monomer was synthesized by dehydration of the corresponding secondary alcohol. Free radical initiated copolymerizations with methyl methacrylate, styrene or isobutyl methacrylate were performed and the copolymer compositions were used in the calculation of reactivity ratios. The data was analyzed via a nonlinear least squares error-in-variables method. The 2,5-dimethyl-3-vinylthiophene was shown to have equal or slightly less reactivity than each of the monomers chosen as comonomers.     

Effect of reaction parameters on the polymerization of methyl methacrylate with nickel acetylacetonate/methylaluminoane

Polymerizations of methyl methacrylate (MMA) employing nickel acetylacetonate [Ni(acac)₂] as catalyst combined with methylaluminoxane (MAO) as cocatalyst were investigated. The main purpose of this work is concerned with the study of reaction parameters MMA polymerization. Temperature of polymerization, Al/Ni mole ratio, type of solvent, catalyst concentration and time dependence were examined. The influence of Lewis bases on the polymerization was also studied. The binary system Ni(acac)₂/MAO was the only one able to polymerize MMA at the conditions employed in this work. The cocatalytic activity of MAO was compared to those of common alkylaluminium compounds. The polymers were characterized by gel-permeation chromatography (GPC) and ¹³C-NMR techniques. Received: 20 August 1996/Revised: 4 December 1996/Accepted: 9 December 1996     

Polymerization of methyl methacrylate catalyzed by mono-/bis-salicylaldiminato nickel(II) complexes and methylaluminoxane

Two types of salicylaldiminato-based nickel complexes, mono-ligated Ni(II) complexes ([O-C₆H₄-o- C(H)=N-Ar]Ni(PPh₃)(Ph) (5), [O-(3,5-Br₂)C₆H₂-o-C(H)=N-Ar]Ni(PPh₃)(Ph) (6), [O-(3-t-Bu)C₆H₃-o-C(H)=N-Ar]Ni(PPh₃)(Ph) (7)) and bis-ligated Ni(II) complexes ([O-(3,5-Br₂)C₆H₂-o-C(H)=N-Ar]₂Ni (8), [O-(3,5-Br₂)C₆H₂-o-C(H)=N-2-C₆H₄(PhO)]₂Ni (9), Ar=2,6-C₆H₃(i-Pr)₂) were synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), mass spectrography (MS) and elemental analysis (EA). In the presence of methylaluminoxane (MAO) as cocatalyst, all the nickel complexes exhibited high activities for the polymerization of methyl methacrylate (MMA) and syndiotactic-rich poly(methyl methacrylate) (PMMA) was obtained. The complexes with less bulky substituents on salicylaldiminato framework possessed higher activities, while with the same salicylaldiminato, the mono-ligated nickel complexes showed higher catalytic activity than bis-ligated ones.     

Polymerization of methyl methacrylate with Ni(acac)2–methylaluminoxane catalyst

Polymerization of methyl methacrylate (MMA) with nickel(II) acetylacetonate [Ni(acac)₂] in combination with methylaluminoxane (MAO) was investigated. Ni(acac)₂ was found to be an effective catalyst for the polymerization of MMA. From a kinetic study of the polymerization of MMA with the Ni(acac)₂–MAO catalyst, the overall activation energy was estimated to be 15 kJmol⁻¹. The polymerization rate (R_p) was expressed as follows: R_p = k [MMA]^1.0[Ni(acac)₂–MAO]^0.6 (the MAO/Ni mole ratio was kept constant). The mechanism for the polymerization of vinyl monomers with the Ni(acac)₂–MAO catalyst is discussed. © 2000 Society of Chemical Industry     

Copolymerization of ethylene/nonconjugated dienes over a Bis(2‐methyl indenyl) zirconium dichloride/methylaluminoxane catalyst system

Ethylene was copolymerized with 1,5‐hexadiene (1,5‐HD), 1,4‐hexadiene (1,4‐HD) and 1,7‐octadiene (1,7‐OD) with bis(2‐methyl indenyl) zirconium dichloride/methylaluminoxane. 1,5‐HD units formed the trans‐structured cyclopentane rings and 1‐butenyl side chains, and cross‐linking took place during ethylene/1,5‐HD (E15HD) copolymerizations. The lower the polymerization temperature was, the larger the amount of hot xylene (XYL)‐insoluble faction was. Copolymers of ethylene/1,7‐OD (E17OD) did not have any cyclic structures and were nearly insoluble in XYL when produced below 60°C. In contrast, all the copolymers of ethylene/1,4‐HD (E14HD) were completely soluble in XYL. The broadest differential scanning calorimetry melting peak was found for E15HD and then for E17OD, and the narrowest was found for E14HD due to the presence or the absence of the cyclic structures and cross‐linking. Addition of 1,7‐OD or 1,4‐HD as a comonomer reduced the polymerization rate and the molecular weight of the respective copolymers much more than that of 1,5‐HD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1048–1058, 2002; DOI 10.1002/app.10397     

苯乙烯和甲基丙烯酸甲酯梯度共聚物的合成

以2－溴异丁酸乙酯为引发剂,溴化亚酮／联二吡啶／铜为催化剂,通过原子转移自由基聚合（ATRP）以及连续补加第二单体的方法制备苯乙烯（St)－甲基丙烯酸甲酯（MMA）梯度共聚物。共聚物相对分子质量的可控性和窄分布证明这是一种活性聚合过程,反应过程中聚合物链的组成变化情况说明形成了梯度结构;聚合温度和MMA加料速度影响聚合速率和共聚物梯度结构,聚合温度升高和加料速度增大使聚合速率加快;改变单体与引发剂的配比,可以得到相应的相对分子质量聚合物。     

Copolymerization of styrene and methyl methacrylate. Part I: Experimental kinetics and mathematical modeling

A population balance approach is described to follow the time evolution of molecular properties in free-radical copolymerization. The model formulation is based on the two dimensional orthogonal collocation on finite difference (2-OCFD) and method of generating functions (GF) which was properly adopted to calculate time-conversion behavior of styrene-methyl methacrylate copolymerization. A comprehensive model which uses the free volume theory to account for diffusion controlled termination and propagation reactions as well as the variation of the initiator efficiency with respect to the monomer conversion was developed. The model is capable of predicting the conversion, composition and molecular weight development up to limiting conversions. The plasticizing effect of a blowing agent on the rate of copolymerization has been investigated. The phenomenological aspect of rate data is analyzed for the copolymerization of styrene with methyl methacrylate over a full range of conversion and the gel effect index is used to systematize the observations.     

苯乙烯和甲基丙烯酸甲酯梯度共聚物的应用

将用原子转移自由基聚合及连续补加甲基丙烯酸甲酯（MMA）的方法制备的苯乙烯（St）/MMA梯度聚合物P（Pt-t-MMA）作为增容剂应用于聚氯乙烯/苯乙烯-丁二烯-苯乙烯嵌段共聚物（PVC/SBS）和PS/PMMA聚合物合金的增容和改性。扫描电镜结果表明,P（St-t-MMA）可以改善PVC/SBS和PMMA/PS合金的相容性。PVC/SBS合金中加入少量P（St-t-MMA)后,冲击强度从6.0kJ/m^2提高到12.1kJ/m^2,加工流变性能得到了改善。SBS用量也影响PVC/SBS合金的冲击强度。     

Copolymerization of aromatic polyamide macromonomers with methyl methacrylate

Summary Graft copolymers of end methacrylate-functionalized[MacroAM] or styrene-functionalized[MacroAS] polyamide macromonomers with methyl methacrylate(MMA) were prepared by radical copolymerization, and their thermal, dynamic properties, and miscibility with matrix PMMA have been investigated. The glass transition temperature(Tg)s of the copolymers were significantly elevated with the increase of the macromonomer content in the copolymer. Storage modulus E of the graft copolymers began to decrease at around 85°C, which is close to Tg of PMMA, irrespective of the macromonomer content in the copolymers. As the macromonomer content and its degree of polymerization became higher, the drop in E became significant.     

Novel monotitanocene and methylaluminoxane catalyst for syndiospecific polymerization of styrene

Syndiotactic polystyrene (sPS) was synthesized with a novel monotitanocene complex of η⁵‐pentamethylcyclopentadienyltri‐4‐methoxyphenoxy titanium [Cp*Ti(OC₆H₄OCH₃)₃] activated by methylaluminoxane (MAO) in different polymerization media, including heptane, toluene, chlorobenzene, and neat styrene. In all cases bulk polymerization produced sPS with the highest activity and molecular weight. Solution polymerization produced much better activity in heptane than in the other solvents. Using a solvent with a higher dipole moment, such as chlorobenzene resulted in lower activity and syndiotacticity because of the stronger coordination of solvent with the Ti(III) active species, which controlled syndiospecific polymerization of styrene. With bulk polymerization at a higher polymerization temperature the Cp*Ti(OC₆H₄OCH₃)₃–MAO catalyst produced sPS with high catalytic activity and molecular weight. The external addition of triisobutylaluminum (TIBA) to the Cp*Ti(OC₆H₄OCH₃)₃–MAO system catalyzing styrene polymerization led to significant improvement of activity at a lower Al:Ti molar ratio, while the syndiotacticity and molecular weight of the yields were little affected. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1243–1248, 2001     

Graft polymerization of methyl methacrylate onto wool initiated by ferric acetylacetonate/dichloroacetic acid system

The graft polymerization of methyl methacrylate (MMA) initiated by ferric acetyl acetonate/dichloroacetic acid [Fe(acac)₃–Cl₂CHCOOH] system onto wool has been investigated in a mixture of water and dioxane. No grafting occurred in organic solvent; water was essential to the grafting. Both the total conversion and the percentage of grafting showed maxima when the mole ratio of Fe(acac)₃ and Cl₂CHCOOH was ¼. Increasing wool content increased the percentage of grafting, while homopolymer conversion was independent of wool content. The rate of grafting was not proportional to MMA concentration. The grafting mechanism was discussed from these results.     

澳化亚铜催化下的甲基丙烯酸甲醋(MMA)与乙烯的共聚合

以溴化亚铜为催化剂,采用原子转移自由基聚合方法对MMA和乙烯进行共聚合,用核磁共振法表征了共聚物中聚乙烯的含量。结果表明,在压力为6MPa的条件下,MMA与乙烯共聚物中聚乙烯的摩尔分数可达到15.9％。关键词：甲基丙烯     

Organotin polymers. IX. Copolymerization parameters of di-(tri-n-butyltin) itaconate with styrene and methyl methacrylate

Copolymerization reactions of di-(tri-n-butyltin) itaconate with styrene and methyl methacrylate were carried out in solution at 70°C using 1 mol% azobisisobutyronitrile as a free radical initiator. The copolymer compositions were determined by chemical analysis as well as from ¹H-NMR data. The monomer reactivity ratios for copolymerizations of di-(tri-n-butyltin) itaconate with styrene and methyl methacrylate have been found to be r₁ = 0.228, r₂ = 0.677, and r₁ = 0.220, r₂ = 1.635, respectively. The sequence distribution of the triad fractions were calculated from reactivity ratios and compared with those obtained from ¹H-NMR data.     

Copolymerization of ethylene and styrene with supported TiCl4/NdCl3 catalyst

The copolymerization of ethylene and styrene was carried out in the presence of TiCl₄/NdCl₃/MgCl₂/AlEt₃ catalyst. The influences of comonomer ratio, concentrations of catalyst and AlEt₃, solvents, and temperature on the copolymerization were investigated. Copolymerization products containing styrene of 4–85 mol % were obtained with good yield. The results of ¹³C-NMR, IR, X-ray diffraction, and solvent extraction show that the products are mainly copolymers with various comonomer sequences and exhibit special mechanical properties. © 1994 John Wiley & Sons, Inc.     

Copolymerization of 2-methacryloxytropone with methyl methacrylate and ethyl acrylate

Summary 2-Methacryloxytropone was synthesized via reported methods and it's free radical initiated copolymerization with methyl methacrylate or ethyl acrylate was investigated. The 2-methacryloxytropone was found to be the more reactive monomer in both cases, however the difference in reactivity was more pronounced in the ethyl acrylate case.