首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 328 毫秒
1.
(S)-2-(Ethyl propionate)-(O-ethyl xanthate) (X1) and the newly synthesized (S)-2-(ethyl isobutyrate)-(O-ethyl xanthate) (X2) were used as the reversible addition-fragmentation chain transfer (RAFT) agents for the radical polymerization of N-vinylpyrrolidone (NVP). The former showed the better chain transfer ability in the polymerization at 60 °C. Kinetics study with X1 shows the psuedo-first order kinetics upto 45% monomer conversion. Molecular weight (M n) of the resulted polymer increases linearly with increase in the monomer conversion upto around 45%. Polydispersity of the corresponding poly(NVP)s increase gradually from 1.2 to 1.9 with increase in the monomer conversion. Chain-end analysis of the resulted polymer by 1H NMR shows clearly that polymerization started with radical forming out of xanthate mediator. Living nature of the polymerization was confirmed from the successful homo chain extension experiment and also the hetero-chain extension experiment involving synthesis of poly(NVP)-b-polystyrene amphiphilic diblock copolymer.  相似文献   

2.
(S)-2-(Ethyl propionate)-(O-ethyl xanthate) (X1) and (S)-2-(Ethyl isobutyrate)-(O-ethyl xanthate) (X2) were used as the reversible addition-fragmentation chain transfer (RAFT) agents for the radical polymerization of vinyl acetate (VAc). The former showed the better chain transfer ability in the polymerization at 60°C. Kinetic study with both RAFT agents showed pseudo-first order kinetics up to around 85% monomer conversion. Molecular weight of the resulting polymer increased linearly with increase in the monomer conversion up to around 85%. The observed molecular weights calculated from 1H-NMR spectrum [Mn(NMR)] are close to the corresponding theoretical molecular weights [Mn(theor)]. The corresponding polydispersity index (PDI) of the resulting polymers remained almost constant at around 1.2 up to ∼ 65% monomer conversion and then increased gradually with the further increase in the monomer conversion. Chain-end analysis of the resulting polymers by 1H-NMR showed clearly that polymerization started with the radical forming out of the xanthate mediator. The negligible homo-chain extension and the hetero-chain extension involving synthesis of poly(VAc)-b-poly(NVP) diblock copolymer were occurred. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012  相似文献   

3.
Two new alkyne‐terminated xanthate reversible addition‐fragmentation chain‐transfer (RAFT) agents: (S)‐2‐(Propynyl propionate)‐(O‐ethyl xanthate) (X3) and (S)‐2‐(Propynyl isobutyrate)‐(O‐ethyl xanthate) (X4) were synthesized and characterized and used for the controlled radical polymerization of N‐vinylpyrrolidone (NVP). X3 showed better chain transfer ability in the polymerization at 60°C. Molecular weight of the resulted polymer increased linearly with the increase in monomer loading. Kinetics study with X3 showed the pseudo‐first order kinetics up to 67% monomer conversion. Molecular weight (Mn) of the resulting polymer increased linearly with the increase in the monomer conversion up to around 67%. With the increase in the monomer conversion, polydispersity of the corresponding poly(NVP)s initially decreased from 1.34 to 1.32 and then increased gradually to 1.58. Chain‐end analysis of the resulting polymer by 1H‐NMR and FTIR showed clearly that polymerization started with radical forming out of xanthate RAFT agent. Living nature of the polymerization was also confirmed from the successful homo‐chain extension experiment and the hetero‐chain extension experiment involving synthesis of poly(NVP)‐b‐polystyrene amphiphilic diblock copolymer. Formed alkyne‐terminated poly(NVP) also allowed easy conjugation to azide‐terminated polystyrene by click chemistry to prepare well‐defined poly(NVP)‐b‐polystyrene block copolymers. Resulting polymers were characterized by GPC, 1H‐NMR, FTIR, and thermal study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013  相似文献   

4.
In this study, a macroporous polypropylene membrane (MPPM) was grafted with hydrophilic poly(N‐vinyl‐2‐pyrrolidone) (PNVP) based on a one‐pot reversible‐addition fragmentation chain transfer (RAFT) polymerization and click chemistry. First, we prepared the clickable membrane by bromination and following SN2 nucleophilic substitution reaction; then, click chemistry and RAFT polymerization were performed in one‐pot to graft PNVP to the MPPM surface. The surface characterizations, including attenuated total reflectance/Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and field‐emission scanning electron microscopy, illustrated that PNVP was really grafted onto the MPPM surface. The permeation and antifouling characteristics of the MPPMs were measured by the filtration of a bovine serum albumin dispersion; this showed that in contrast to the nascent membrane, the grafted membrane efficiently obstructed protein molecules because of the compactly grafted polymer chains. The hydrophilicity and antifouling properties of MPPM were greatly ameliorated after modification. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42649.  相似文献   

5.
The [(η5-C5H4(CH2)3OC(O)(CH2)2C≡CH)Mo(CO)3]2 complex (1) was synthesized and used to explore the feasibility of using the Huisgen cycloaddition reaction (a click reaction) to incorporate molecules with metal–metal bonds into polymer backbones. In a model reaction, coupling of 1 with benzyl azide was observed in 24 h using Cp*Ru(PPh3)2Cl as a catalyst. In contrast, the reaction of 1 with benzyl azide using a CuBr/ligand catalyst (where the ligand is either PMDETA or bipyridine), resulted in disproportionation of the Mo–Mo unit in 1. Complex 1 was also coupled with telechelic azide-terminated polystyrene oligomers. With either the CuBr/PMDETA or CuBr/bipyridine catalyst, disproportionation of the Mo–Mo bonded unit occurred before complete coupling was observed. The reaction was also slow when the Cp*Ru(PPh3)2Cl catalyst was used; however, no disproportionation products were observed and a high molecular weight polymer (M n = 120,000 g/mol) was produced. The Cp*Ru(PPh3)2Cl catalyst was also used to couple 1 with azide-terminated poly(ethylene glycol). After 15 h, this reaction produced a polymer with M n = 73,000 g mol−1. It is concluded that, although somewhat slow, click chemistry using the Cp*Ru(PPh3)2Cl catalyst is an excellent method for synthesizing high molecular weight polymers with metal–metal bonds along the backbone.  相似文献   

6.
New hybrid poly(hydroxyethyl methacrylate‐co‐methyl methacrylate)‐g‐polyhedral oligosilsesquioxane [poly(HEMA‐co‐MMA)‐g‐POSS] nanocomposites were synthesized by the combination of reversible addition fragmentation chain transfer (RAFT) polymerization and click chemistry using a grafting to protocol. Initially, the random copolymer poly(HEMA‐co‐MMA) was prepared by RAFT polymerization of HEMA and MMA. Alkynyl side groups were introduced onto the polymeric backbones by esterification reaction between 4‐pentynoic acid and the hydroxyl groups on poly(HEMA‐co‐MMA). Azide‐substituted POSS (POSS? N3) was prepared by the reaction of chloropropyl‐heptaisobutyl‐substituted POSS with NaN3. The click reaction of poly(HEMA‐co‐MMA)‐alkyne and POSS? N3 using CuBr/PMDEATA as a catalyst afforded poly(HEMA‐co‐MMA)‐g‐POSS. The structure of the organic/inorganic hybrid material was investigated by Fourier transformed infrared, 1H‐NMR, and 29Si‐NMR. The elemental mapping analysis of the hybrid using X‐ray photoelectron spectroscopy and EDX also suggest the formation of poly(HEMA‐co‐MMA)‐anchored POSS nanocomposites. The XRD spectrum of the nanocomposites gives evidence that the incorporation of POSS moiety leads to a hybrid physical structure. The morphological feature of the hybrid nanocomposites as captured by field emission scanning electron microscopy and transmission electron microscopic analyses indicate that a thick layer of polymer brushes was immobilized on the POSS cubic nanostructures. The gel permeation chromatography analysis of poly(HEMA‐co‐MMA) and poly(HEMA‐co‐MMA)‐g‐POSS further suggests the preparation of nanocomposites by the combination of RAFT and click chemistry. The thermogravimetric analysis revealed that the thermal property of the poly(HEMA‐co‐MMA) copolymer was significantly improved by the inclusion of POSS in the copolymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013  相似文献   

7.
The copper(II) xanthate Cu(S2COEt)2·TMEDA (1) (TMEDA = N,N-tetramethylethylenediamine) has been synthesised and is the first structurally-characterised xanthate of copper in the + 2 oxidation state. 1 has an octahedral cis, cis, cis-ligand arrangement about the metal, in which xanthate chelation is markedly asymmetric. Both bulk thermal decomposition and film growth by aerosol-assisted chemical vapour deposition (AACVD) using 1 as precursor lead to the formation of Cu2S.  相似文献   

8.
Jian Zhu  Xiulin Zhu  K.G. Neoh 《Polymer》2007,48(24):6992-6999
An alternative approach to the synthesis of well-defined star polymers with hetero-arms was described. An azide-functionalized dithioester chain transfer agent (CTA-N3) was designed and synthesized. Using CTA-N3 as the reversible addition-fragmentation chain transfer (RAFT) agent, styrene was polymerized in a controlled manner. The so-obtained polystyrene showed a high proportion of azide-functionalized chains (PS-N3, about 92%). The azide end-capped PS-N3 could be assembled, via click reaction with a bromide-containing trialkyne coupling agent, to form a 3-arm star polystyrene (PS3-Br) with a narrow molecular weight distribution. PS3-Br could further serve as a macro-initiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). Accordingly, well-defined star polymers containing three polystyrene and one poly(methyl methacrylate) (PMMA) arms, and with a narrow molecular weight distribution, were successfully prepared.  相似文献   

9.
Radiation‐induced graft polymerization of low‐density polyethylene with N‐vinylpyrrolidone, LDPE‐g‐PNVP, was used as a starting material for the synthesis of polyfunctionally substituted heterocyclic products. Thus, LDPE‐g‐PNVP reacts with ylidenemalononitrile derivatives to give the Michael addition products. In multistep reaction, LDPE‐g‐PNVP reacts with N,N‐dimethylformamide dimethyl acetal (DMFDMA), hydrazine hydrate and malononitrile, respectively, to give a hydropyrrolopyridazine derivative. The latter could also be prepared via the reaction of LDPE‐g‐PNVP with DMFDMA, followed by treating with cyanoacetohydrazide. Also, LDPE‐g‐PNVP reacts with malononitrile to give an adduct product, dimer malononitrile derivative 13. The latter reacts with sulfur element to afford the thiophene derivative. Furthermore, this adduct reacts with hydrazine hydrate to isolate the original starting material, LDPE‐g‐PNVP, and aminopyridine derivative. The resulted films were characterized by infrared (IR) spectroscopy, 1H nuclear magnetic resonance (1H‐NMR) mass spectroscopy, elemental analysis, swelling behavior, and electron scanning microscope. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2963–2970, 1999  相似文献   

10.
Pyrene end‐labeled star poly(?‐caprolactone)s (PCLs) with polyhedral oligomeric silsesquioxane (POSS) core were prepared by combination of copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) click chemistry and ring‐opening polymerization techniques. First, ?‐caprolactone (?‐CL) is polymerized by using 1‐pyrene methanol as initiator and stannous octoate as catalyst to obtain α‐pyrene‐ω‐hydroxyl telechelic PCL with different chain lengths. Then, its hydroxyl group is converted to acetylene functionality by esterification reaction with propargyl chloroformate. Finally, the CuAAC click reaction of α‐pyrene‐ω‐acetylene telechelic PCL with POSS‐(N3)8 leads to corresponding pyrene end‐labeled star‐shaped PCLs. The successful synthesis of pyrene end‐labeled star polymers is clearly confirmed by 1H‐nuclear magnetic resonance, Fourier transform infrared, gel permeation chromatograph, differential scanning calorimeter, and thermogravimetric analysis. Furthermore, non‐covalent interactions of obtained star polymers with fullerene are investigated in liquid media. Based on Raman spectroscopy and visual investigations, the star polymer having shorter chain length exhibited better and more stable dispersion with fullerene. The amount of pyrene units present per polymer chains can directly influence the dispersion stability of fullerene. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46520.  相似文献   

11.
Diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as a novel di-functional reversible addition–fragmentation chain transfer (RAFT) agent was synthesized based on 2,5-diketopiperazine. The RAFT agent was designed based on the propagating core (R group) approach and characterized by 1H NMR, 13C NMR, FT-IR, elemental analysis, and melting point technique. Then, ethyl methacrylate was synthesized via free radical and RAFT polymerizations. To investigate the effect of the RAFT agent on the kinetic of polymerization, molecular weight, and polydispersity index (PDI) of polymers and also monomer conversion were monitored. Also, synthesized polymers were characterized by 1H NMR, 13C NMR, FT-IR, and TGA. Characterization analyses of synthesized RAFT agent were consistent with the structure. NMR and FTIR analyses confirmed end group incorporation of RAFT agent into polymer structure. According to results, poly(ethyl methacrylate) with low PDI (1.14) was obtained. Kinetic study indicated well-controlled polymerization of ethyl methacrylate by synthesized RAFT agent. TGA results showed that RAFT agent could reduce termination reactions and so reduce head-to-head bonds and chain-end unsaturation by keeping the concentration of radicals low enough.  相似文献   

12.
A structure‐exact starch‐based xanthate agent was prepared and used as chain transfer agent to mediate RAFT polymerization of vinyl acetate, which offered a convenient way to well control the structure and composition of starch‐g‐poly(vinyl acetate). The structures of the intermediate and the polymer were verified with FTIR and 1H‐NMR. Gel permeation chromatography measurement results indicated that the polymerization was performed as expected. It was found that the relationship between number average molecular weight and monomer conversion was linear. The polydispersity index of grafted side‐chain ranged from 1.19 to 1.53 and most of them were around 1.2. There was one more degradation stage appeared on the thermogravimetric analysis profile of starch‐g‐poly(vinyl acetate) than that of starch. TEM observation exhibited that the product was able to self‐assemble into micelles in aqueous solution, which suggested the copolymer was amphiphilic. Both the thermal and amphiphilic properties demonstrated the starch‐g‐poly(vinyl acetate) was successfully synthesized as well. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012  相似文献   

13.
For the first time formation of well-defined poly n-vinylpyrrolidone/n-TiO2 nanocomposite by xanthate-mediated radical polymerization was accomplished. The synthesis of polymer nanocomposite materials has been intensively studied due to their extraordinary properties and wide-spread potential applications. For this purpose, first 2‐propionic acid-O-ethyl xanthate, as a RAFT agent, was synthesized by the reaction of 2-bromopropionic acid with potassium O-ethyl xanthate with acetone as the solvent. A carboxylic group in the RAFT agent was attached to the n-TiO2 surface by metalation reaction. Then, RAFT polymerization of n-vinylpyrrolidone (NVP) was subsequently conducted to graft poly(n-vinylpyrrolidone) (PNVP) onto the exterior surface of n-TiO2 nanoparticles, forming a novel core–shell nanostructure with a mesoporous core and a polymeric nanoshell. The viscosimetry data and 1H NMR spectra were used to calculate the molecular weight of the polymer. The obtained results showed a good agreement withthe methods used. A significant enhancement in the stability of the composites was obtained as demonstrated by the TGA results. The SEM and TEM results showed that the polymer was formed on the surface of the particles. The XRD pattern of the nanoparticles of n-TiO2 presented the amorphous structure of the crystal morphology of the composites. The FTIR and UV–visible spectroscopy results proved that the PNVP chains were grafted onto the n-TiO2 nanoparticles by surface RAFT polymerization.  相似文献   

14.
Complex formation between zinc (5 × 10?2?5 × 10?4M) and cellulose xanthate and its effect upon the rate of dexanthation by 0.25M sulfuric acid were studied. The determinations were based on spectrophotometric measurements on dilute solutions of cellulose xanthate with γ-numbers from 140 to 30. The results showed that the tendency of the xanthate groups to enter into complexes with zinc increased as the γ-number decreased. The stabilization toward decomposition by acid produced by complex formation was also found to vary with the γ-number and was much smaller at low than at high γ-numbers. These findings indicate that cellulose xanthate, because of local differences in the steric arrangement of potential ligand groups along the molecule, can form a whole set of zinc complexes, differing in thermodynamic stability and reactivity toward acid.  相似文献   

15.
Conclusions The type of chemical bond in the chromium compounds obtained which are based on cellulose xanthate has been ascertained.It has been shown that, as a result of an oxidation-reduction reaction between the thiocarbonate groups of the cellulose xanthate and K2Cr2O7 (in acid medium), a chromium xanthate is formed which has a covalent type of bond between the sulfur atoms and chromium.Translated from Khimicheskie Volokna, No. 6, pp. 29–30, November–December, 1987.  相似文献   

16.
A facile synthetic pathway to a multi‐arm star graft polymer has been developed via a grafting‐onto strategy using a combination of a reversible addition–fragmentation chain transfer (RAFT) arm‐first technique and aldehyde–aminooxy click reaction. A star backbone bearing aldehyde groups was prepared by the RAFT copolymerization of acrolein (Ac), an existing commercial aldehyde‐bearing monomer, with styrene (St), followed by crosslinking of the resultant poly(St‐co‐Ac) macro‐RAFT agent using divinylbenzene. The aldehyde groups on the star backbone were then used as clickable sites to attach poly(ethylene glycol) (PEG) side chains via the click reaction between the aldehyde groups and aminooxy‐terminated PEG, leading to a structurally well‐defined star graft copolymer with arms consisting of poly(St‐co‐Ac) as backbone and PEG as side chains. Crystalline morphology and self‐assembly in water of the obtained star graft copolymer were also investigated. Opportunities are open for the star graft copolymer to form either multimolecular micelles or unimolecular micelles via control of the number of grafted PEG side chains. © 2013 Society of Chemical Industry  相似文献   

17.
Poly(vinyl acetate) combs have been prepared via macromolecular design via interchange of xanthate (MADIX)/reversible addition-fragmentation chain-transfer (RAFT) polymerization using xanthate functionalized polymer cores. The comb backbones were prepared using well-defined poly(vinyl alcohol) PVA polymers with a degree of polymerization of 20, 100 and 170, respectively. Functionalization with xanthates via R-group or a Z-group approach resulted in the formation of macromolecular MADIX agents. While Z group designed macromolecular xanthate agents appeared to inhibit the polymerization of vinyl acetate (VAc), R group designed macromolecular xanthate agents achieved to mediate efficiently the bulk polymerization of VAc affording PVAc combs. However, the growth of the combs was accompanied at low conversions by the formation of linear polymer chains as a result of the constant initiation (AIBN) and shoulders, which can be attributed to intermolecular coupling reactions. The proportions of single chains and termination products were observed to increase with the degree of polymerization of the macromolecular MADIX agents broadening the molecular weight distribution. As a result of a stable ester link between the branches and the PVA backbone, the branched PVAc architectures were finally hydrolyzed to afford poly(vinyl alcohol) combs.  相似文献   

18.
Alexander Theis 《Polymer》2006,47(4):999-1010
Living free radical polymerization technology (macromolecular design via the interchange of xanthates (MADIX)) was applied to give accesses to chain length and conversion dependent termination rate coefficients of vinyl acetate (VAc) at 80 °C using the MADIX agent 2-ethoxythiocarbonylsulfanyl-propionic acid methyl ester (EPAME). The kinetic data were verified and probed by simulations using the PREDICI® modelling package. The reversible addition-fragmentation transfer (RAFT) chain length dependent termination (CLD-T) methodology can be applied using a monomer reaction order of unity, since VAc displays significantly lower monomer reaction orders than those observed in acrylate systems (ω(VAc, 80 °C)=1.17±0.05). The observed monomer reaction order for VAc is assigned to chain length dependent termination and a low presence of transfer reactions. The α value for the chain length regime of log(i)=1.25−3.25 (in the often employed expression ) reads 0.09±0.05 at low monomer to polymer conversion (10%) and increases significantly towards larger conversions (α=0.55±0.05 at 80%). Concomitantly with a lesser amount of midchain radicals, the chain length dependence of kt is significantly less pronounced in the VAc system than in the corresponding acrylate systems under identical reaction conditions. The RAFT(MADIX)-CLD-T technique also allows for mapping of kt as a function of conversion at constant chain lengths. Similar to observations made earlier with methyl acrylate, the decrease of kt with conversion is more pronounced at increased chain lengths, with a strong decrease in kt exceeding two logarithmic units from 10 to 80% conversion at chain lengths exceeding 1800.  相似文献   

19.
Depending on the different coordinated anions used, reaction of Cd(II) salt with 2,2′-(1,4-butanediyl)bis(1H-benzimidazole) results in the formation of two coordination polymers: a 1D chain {[Cd(H2C4BIm)Cl2] · (H2C4BIm)}n (1), and a 2D sheet [Cd(HC4BIm)(NCS)]n (2) which features distorted 4.82 topology (H2C4BIm = 2,2′-(1,4-butanediyl)bis(1H-benzimidazole)). The fluorescence properties for both the complexes have been studied.  相似文献   

20.
Summary Rare earth catalyst system: lanthanide phosphonate/tri-i-butyl aluminum (Nd(P204)3/Al(i-Bu)3) has been found for the first time as a novel catalyst for the polymerization of n-hexyl isocyanate (HNCO). Nd(P204)3 and Nd(P507)3 are the commercial names of neodymium 2-ethylhexyl phosphonates, their formulas are shown in table 1. The catalyst can be prepared easily by mixing Nd(P204)3 and Al(i-Bu)3. The effects of catalyst, solvent, reaction temperature and time on the polymerization of HNCO were studied. The obtained poly (n-hexyl isocyanate) (PHNCO) was characterized by GPC, FT-IR, 1H-NMR and TGA. The resulting PHNCO had molecular weight (Mn=39.6×104, Mv=67.2×104), molecular weight distribution (MWD=2.44) and yield (82.7%) under the moderate reaction conditions: catalyst concentration [Nd]=6.65×10-2mol/L, Al/Nd=10 molar ratio, [HNCO]/[Nd]=100 molar ratio, at -10oC for 10h in bulk. Relatively high reaction temperature (-10oC) is the most distinct virtue. The IR and NMR analyses show that the polymer obtained is not polyether but polyisocyanate.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号