Production, mechanical properties and in vitro biocompatibility of highly aligned porous poly(ε-caprolactone) (PCL)/hydroxyapatite (HA) scaffolds

We produced highly aligned porous poly(ε-caprolactone) (PCL)/hydroxyapatite (HA) scaffolds by unidirectionally freezing PCL/HA solutions with various HA contents (0, 5, 10 and 20 wt% in relation to the PCL polymer) and evaluated their mechanical properties and in vitro biocompatibility to examine their potential applications in bone tissue engineering. All the prepared scaffolds had a highly aligned porous structure, in which the HA particles were uniformly dispersed in the PCL walls. The elastic modulus of the PCL/HA scaffolds significantly increased from 0.12 ± 0.02 to 2.65 ± 0.05 MPa with increasing initial HA content from 0 to 20 wt%, whereas the pore size decreased from 9.2 ± 0.7 to 4.2 ± 0.8 μm. In addition, the PCL/HA scaffolds showed considerably enhanced in vitro cellular responses that were assessed in terms of cell attachment, proliferation and osteoblastic differentiation.     

Preparation and characterization of poly(L‐lactide)/ poly(ϵ‐caprolactone) fibrous scaffolds for cartilage tissue engineering

Polyblend fibrous scaffolds in mass ratios of 100/0, 90/10, 80/20, and 70/30 from poly(L ‐lactide) (PLLA) and poly(?‐caprolactone) (PCL) for cartilage tissue engineering were prepared in three steps: gelation, solvent exchanging, and freeze‐drying. Effects of the blend ratio, the exchange medium, and the operating temperature on the morphology of scaffolds were investigated by SEM. PLLA/PCL scaffolds presented an ultrafine fibrous network with the addition of a “small block” structure. Smooth and regular fibrous networks were formed when ethanol was used as the exchange medium. Properties of the scaffolds, such as thermal and mechanical properties, were also studied. The results suggested that the compressive modulus declined as PCL amount increased. The incorporation of PCL effectively contributed to reduce the rigidity of PLLA. Bovine chondrocytes were seeded onto PLLA/PCL scaffold. Cells attached onto the fibrous network and their morphology was satisfactory. This polyblend fibrous scaffold will be a potential scaffold for cartilage tissue engineering. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1676–1684, 2004     

Surface‐engineered hydroxyapatite nanocrystal/ poly(ε‐caprolactone) hybrid scaffolds for bone tissue engineering

To achieve novel polymer/bioceramic composite scaffolds for use in materials for bone tissue engineering, we prepared organic/inorganic hybrid scaffolds composed of biodegradable poly(ε‐caprolactone) (PCL) and hydroxyapatite (HA), which has excellent biocompatibility with hard tissues and high osteoconductivity and bioactivity. To improve the interactions between the scaffolds and osteoblasts, we focused on surface‐engineered, porous HA/PCL scaffolds that had HA molecules on their surfaces and within them because of the biochemical affinity between the biotin and avidin molecules. The surface modification of HA nanocrystals was performed with two different methods. Using Fourier transform infrared, X‐ray diffraction, and thermogravimetric analysis measurements, we found that surface‐modified HA nanocrystals prepared with an ethylene glycol mediated coupling method showed a higher degree of coupling (%) than those prepared via a direct coupling method. HA/PCL hybrid scaffolds with a well‐controlled porous architecture were fabricated with a gas‐blowing/particle‐leaching process. All HA/PCL scaffold samples exhibited approximately 80–85% porosity. As the HA concentration within the HA/PCL scaffolds increased, the porosity of the HA/PCL scaffolds gradually decreased. The homogeneous immobilization of biotin‐conjugated HA nanocrystals on a three‐dimensional, porous scaffold was observed with confocal microscopy. According to an in vitro cytotoxicity study, all scaffold samples exhibited greater than 80% cell viability, regardless of the HA/PCL composition or preparation method. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

In vitro degradation of poly(l-lactide)/poly(ε-caprolactone) blend reinforced with MWCNTs

The physical and mechanical properties of poly(l-lactide)/poly(??-caprolactone) (PLLA/PCL) blends reinforced with multiwalled carbon nanotubes (MWCNTs) before and after in vitro degradation were investigated. Because of brittleness, PLLA needs to be plasticized by PCL as a soft polymer. The MWCNTs are used to balance the stiffness and the flexibility of PLLA/PCL blends. The results showed that with incremental increase in concentration of MWCNTs in composites, the agglomerate points of MWCNTs were increased. The physical and mechanical properties of prepared PLLA/PCL blends and MWCNT/PLLA/PCL nanocomposites were characterized. The X-ray diffraction analysis of the prepared blends and composites showed that MWCNTs, as heterogeneous nucleation points, increased the lamella size and therefore the crystallinity of PLLA/PCL. The mechanical strength of blends was decreased with incremental increase in PCL weight ratio. The mechanical behavior of composites showed large strain after yielding and high elastic strain characteristics. The tensile tests results showed that the tensile modulus and tensile strength are significantly increased with increasing the concentration of MWCNTs in composites, while, the elongation-at-break was decreased. The in vitro degradation rate of polymer blends in phosphate buffer solution (PBS) increased with higher weight ratio of PCL in the blend. The in vitro degradation rate of nanocomposites in PBS increased about 65% when the concentration of MWCNTs increased up to 3% (by weight). The results showed that the degradation kinetics of nanocomposites for scaffolds can be engineered by varying the contents of MWCNTs.     

Biocompatibility and strengthening of porous hydroxyapatite scaffolds using poly(l-lactic acid) coating

Hydroxyapatite (HA) is a well-known biocompatible bone substitute. Porous HA is more resorbable and osteoconductive compared with non-porous HA, and has been studied both experimentally and clinically. However, the mechanical strength of porous HA scaffolds is known to be weak. In this study, we developed a porous HA scaffold coated with a synthetic biodegradable polymer, poly(l-lactic acid) (PLLA), to strengthen the scaffold. PLLA-coated HA pellets were used to investigate the in vitro proliferation and alkaline phosphatase (ALP) activity of osteoblasts. PLLA-coated porous HA scaffolds were observed using scanning electron microscopy to investigate surface characteristics, porosity, and mechanical strength. PLLA coating concentration varied from 2 to 10 wt%. Osteoblast proliferation was higher in HA samples coated with PLLA compared with non-coated. ALP activity was highest on 8 wt% PLLA-coating after 3 days and on 4 wt% and 6 wt% PLLA after 9 and 12 days. Porous HA scaffolds with higher concentrations of PLLA were found to have a smoother, flatter surface. This enhanced proliferation and attachment of osteoblasts onto the porous HA scaffold. PLLA solution at a concentration of 10 wt% decreased scaffold porosity to half that of HA scaffolds with no PLLA coating. Scaffold mechanical strength was increased two-fold with a PLLA concentration of 2 wt%. Based on in vitro experimentation, it can be concluded that PLLA-coating on porous HA scaffolds enhances both the biocompatibility and the mechanical strength.     

Influence of hydroxyapatite and BMP‐2 on bioactivity and bone tissue formation ability of electrospun PLLA nanofibers

An excellent bioactive scaffold material which could induce and promote new bone formation is essential in the bone repair field. In this study, the bioactive material hydroxyapatite (HA) and the bone morphogenetic protein‐2 (BMP‐2) were added to poly‐l‐lactic acid (PLLA) using the electrospinning method. Scanning electron microscopy investigations performed on four different fiber scaffolds, PLLA, PLLA/HA, PLLA/BMP‐2 and PLLA/HA/BMP‐2, revealed that the fibers of all scaffolds are closely interwoven, and the presence of large interconnected voids between the fibers, resulting in a three‐dimensional porous network structure that was similar to the structure of the extracellular matrix of healthy bones. In the MG63 cell culture growth experiments, the composite scaffold material PLLA/HA/BMP‐2 showed a higher bioactivity than the other three scaffold materials. The four scaffold materials were implanted in rabbits’ tibia for 30 and 90 days. The results of the animal experiments indicate that the capability of the PLLA/HA/BMP‐2 composite to induce and promote bone tissue formation was better compared with PLLA/HA or PLLA/BMP‐2, suggesting that PLLA combined with HA/BMP‐2 is a promising material for bone tissue repair. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42249.     

Electrospun poly(L‐lactide)/poly(ε‐caprolactone) blend fibers and their cellular response to adipose‐derived stem cells

Polymer blending is one of the most effective methods for providing new, desirable biocomposites for tissue‐engineering applications. In this study, electrospun poly(L ‐lactide)/poly(ε‐caprolactone) (PLLA/PCL) blend fibrous membranes with defect‐free morphology and uniform diameter were optimally prepared by a 1 : 1 ratio of PLLA/PCL blend under a solution concentration of 10 wt %, an applied voltage of 20 kV, and a tip‐to‐collector distance of 15 cm. The fibrous membranes also showed a porous structure and high ductility. Because of the rapid solidification of polymer solution during electrospinning, the crystallinity of electrospun PLLA/PCL blend fibers was much lower than that of the PLLA/PCL blend cast film. To obtain an initial understanding of biocompatibility, adipose‐derived stem cells (ADSCs) were used as seed cells to assess the cellular response, including morphology, proliferation, viability, attachment, and multilineage differentiation on the PLLA/PCL blend fibrous scaffold. Because of the good biocompatibility and nontoxic effect on ADSCs, the PLLA/PCL blend electrospun fibrous membrane provided a high‐performance scaffold for feasible application in tissue engineering using ADSCs. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Enhancing Osteoconduction of PLLA-Based Nanocomposite Scaffolds for Bone Regeneration Using Different Biomimetic Signals to MSCs

In bone engineering, the adhesion, proliferation and differentiation of mesenchymal stromal cells rely on signaling from chemico-physical structure of the substrate, therefore prompting the design of mimetic "extracellular matrix"-like scaffolds. In this study, three-dimensional porous poly-L-lactic acid (PLLA)-based scaffolds have been mixed with different components, including single walled carbon nanotubes (CNT), micro-hydroxyapatite particles (HA), and BMP2, and treated with plasma (PT), to obtain four different nanocomposites: PLLA + CNT, PLLA + CNTHA, PLLA + CNT + HA + BMP2 and PLLA + CNT + HA + PT. Adult bone marrow mesenchymal stromal cells (MSCs) were derived from the femur of orthopaedic patients, seeded on the scaffolds and cultured under osteogenic induction up to differentiation and mineralization. The release of specific metabolites and temporal gene expression profiles of marrow-derived osteoprogenitors were analyzed at definite time points, relevant to in vitro culture as well as in vivo differentiation. As a result, the role of the different biomimetic components added to the PLLA matrix was deciphered, with BMP2-added scaffolds showing the highest biomimetic activity on cells differentiating to mature osteoblasts. The modification of a polymeric scaffold with reinforcing components which also work as biomimetic cues for cells can effectively direct osteoprogenitor cells differentiation, so as to shorten the time required for mineralization.     

Blends of aliphatic polyesters. VIII. Effects of poly(L‐lactide‐co‐ε‐caprolactone) on enzymatic hydrolysis of poly(L‐lactide), poly(ε‐caprolactone), and their blend films

Poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA), poly(ε‐caprolactone) (PCL), and their blend (50/50) films containing different amounts of poly(L ‐lactide‐co‐ε‐caprolactone) (PLLA‐CL), were prepared by solution casting. The effects of added PLLA‐CL on the enzymatic hydrolysis of the films were investigated in the presence of proteinase K and Rhizopus arrhizus lipase by use of gravimetry. The addition of PLLA‐CL decreased the proteinase K–catalyzed hydrolyzabilities of the PLLA and PLLA/PCL (50/50) films as well as the Rhizopus arrhizus lipase‐catalyzed hydrolyzability of the PCL and PLLA/PCL (50/50) films. The decreased enzymatic hydrolyzabilities of the PLLA and PCL films upon addition of PLLA‐CL are attributable to the fact that the PLLA‐CL is miscible with PLLA and PCL and the dissolved PLLA‐CL must disturb the adsorption and/or scission processes of the enzymes. In addition to this effect, the decreased enzymatic hydrolyzabilities of the PLLA/PCL (50/50) films upon addition of PLLA‐CL can be explained by the enhanced compatibility between the PLLA‐rich and PCL‐rich phases arising from the dissolved PLLA‐CL. These effects result in decreased hydrolyzable interfacial area for PLLA/PCL films. The decrement in proteinase K–catalyzed hydrolyzability of the PLLA film upon addition of PLLA‐CL, which is miscible with PLLA, was in marked contrast with the enhanced proteinase K–catalyzed hydrolyzability of the PLLA film upon addition of PCL, which is immiscible with PLLA. This confirms that the miscibility of the second polymer is crucial to determine the proteinase K–catalyzed hydrolyzabilities of the PLLA‐based blend films. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 412–419, 2003     

Characterization of the mechanical and thermal properties and morphological behavior of biodegradable poly(L‐lactide)/poly(ε‐caprolactone) and poly(L‐lactide)/poly(butylene succinate‐co‐L‐lactate) polymeric blends

Two series of biodegradable polymer blends were prepared from combinations of poly(L ‐lactide) (PLLA) with poly(?‐caprolactone) (PCL) and poly(butylene succinate‐co‐L ‐lactate) (PBSL) in proportions of 100/0, 90/10, 80/20, and 70/30 (based on the weight percentage). Their mechanical properties were investigated and related to their morphologies. The thermal properties, Fourier transform infrared spectroscopy, and melt flow index analysis of the binary blends and virgin polymers were then evaluated. The addition of PCL and PBSL to PLLA reduced the tensile strength and Young's modulus, whereas the elongation at break and melt flow index increased. The stress–strain curve showed that the blending of PLLA with ductile PCL and PBSL improved the toughness and increased the thermal stability of the blended polymers. A morphological analysis of the PLLA and the PLLA blends revealed that all the PLLA/PCL and PLLA/PBSL blends were immiscible with the PCL and PBSL phases finely dispersed in the PLLA‐rich phase. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Disclosing the crystallization behavior and morphology of poly(ϵ‐caprolactone) within poly(ϵ‐caprolactone)/poly(l‐lactide) blends

In this work, the effect of poly(l ‐lactide) (PLLA) components on the crystallization behavior and morphology of poly(?‐caprolactone) (PCL) within PCL/PLLA blends was investigated by polarized optical microscopy, DSC, SEM and AFM. Morphological results reveal that PCL forms banded spherulites in PCL/PLLA blends because the interaction between the two polymer components facilitates twisting of the PCL lamellae. Additionally, the average band spacing of PCL spherulites monotonically decreases with increasing PLLA content. With regard to the crystallization behaviors of PCL, the crystallization ability of PCL is depressed with increase of the PLLA content. However, it is interesting to observe that the growth rate of PCL spherulites is almost independent of the PLLA content while the overall isothermal crystallization rate of PCL within PCL/PLLA blends decreases first and then increases at a given crystallization temperature, indicating that the addition of PLLA components shows a weak effect on the growth rate of the PCL but mainly on the generation of nuclei. © 2018 Society of Chemical Industry     

A facile strategy to modulate the fluorescent properties of star polymers by varying the arm numbers

Toughening of poly (L-lactide) (PLLA) by flexible poly (??-caprolactone) (PCL) is very attractive for biomedical applications. However, PLLA/PCL blends usually behave brittle fracture, which is ascribed to the immiscibility between two components. This study demonstrates that without physical aging dispersed PCL particles can induce significant ductile deformation of PLLA matrix, accompanied by remarkable decreasing of yield strength, opposite to what is observed in the aged blends. It is deduced that segmental mobility of PLLA matrix and crystalline order of PCL domains, rather than immiscibility, play vital role in determining the ductility of PLLA/PCL blends.     

A modified pultrusion process for preparing composites reinforced with continuous fibers and aligned hydroxyapatite nano needles

Of importance to orthopedic procedures are repair materials that can carry significant loads without excessive deformation. In addition, these materials need to be biocompatible, bioabsorbable, and conducive to the replacement of the repair material with native bone. To meet these requirements, we have designed composites using two biocompatible/bioabsorbable polymers, poly(l ‐lactic acid) (PLLA) in fiber form and polycaprolactone (PCL) filled in a carefully designed fashion with nano needles of hydroxyapatite (HA). Discussed in this article is a modified pultrusion process that proved useful for producing suitable composites. In this process, the feed to the pultrusion die is a stabilized suspension of the HA needles in a PCL/MEK solution, whereas the fiber “bundle” is a single yarn containing 360 PLLA fibers. The small scale is needed to maximize the content of HA in the final composite and assure uniformity. Process variables studied include the ratio of HA to PCL in the suspension, the solids content of the suspension and various geometrical variables in the die design that influence the shear‐rate profile along the fiber path. The goal of the pultrusion step is to fill all interstices between the fibers with a PCL matrix that is reinforced with highly aligned HA needles. POLYM. COMPOS., 36:931–938, 2015. © 2014 Society of Plastics Engineers     

Ultraporous poly(l-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface

The activity of polystyrene-block-poly(l-lactide) (PS-b-PLLA) and polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymer brushes located at a PS/PLLA interface were employed as a route to control the final microstructure of 95% void volume, ultraporous PLLA scaffolds. The latter were initially prepared from melt-processed quaternary blends of ethylene propylene diene rubber/poly(?-caprolactone)/polystyrene/poly(l-lactide) (EPDM/PCL/PS/PLLA) 45/45/5/5%vol. modified with the diblock copolymers. The blends display a layer comprised of the PS and PLLA phases located at the interface of the co-continuous EPDM and PCL phases. When the PS-b-PLLA copolymer is added, sub-micrometric PLLA droplets are encapsulated within the PS continuous layer phase. In comparison, both the PS and PLLA phases compete for the encapsulation process when the PS-b-PMMA is used, indicating that the microstructure of the PLLA phase can be fine-tuned with an adequate choice of interfacial modifier. These effects were investigated by analyzing the microstructure of ternary high-density polyethylene (HDPE)/PS/PMMA 80/10/10%vol. blends displaying PS/PMMA shell/core composite droplets in a HDPE matrix. An inversion of the shell/core structure is observed when the PS-b-PLLA copolymer is used to compatibilize the PS/PMMA interface, whereas no such restructuring occurs with the PS-b-PMMA. These effects are explained by the activity and swelling powers of the copolymer brushes. For the EPDM/PCL/PS/PLLA quaternary systems modified with the PS-b-PMMA, the PLLA homopolymer phase significantly penetrates and swells the PMMA blocks due to their mutual high affinity, as compared to the classical like-prefers-like compatibilization approach. The swelling of the blocks will tend to bend the interface toward the PS phase in order to minimize the lateral compression of the PMMA blocks. A similar effect explains the reversal of the PS/PMMA shell/core structure in the HDPE/PS/PMMA ternary system. This level of control ultimately leads to quite significant differences in microstructures and surface textures for the PLLA scaffolds.     

Porous biodegradable polyester blends of poly(L‐lactic acid) and poly(ε‐caprolactone): physical properties,morphology, and biodegradation

Poly(L ‐lactic acid) (PLLA), poly(ε‐caprolactone) (PCL), and their films without or blended with 50 wt% poly(ethylene glycol) (PEG) were prepared by solution casting. Porous films were obtained by water‐extraction of PEG from solution‐cast phase‐separated PLLA‐blend‐PCL‐blend‐PEG films. The effects of PLLA/PCL ratio on the morphology of the porous films and the effects of PLLA/PCL ratio and pores on the physical properties and biodegradability of the films were investigated. The pore size of the blend films decreased with increasing PLLA/PCL ratio. Polymer blending and pore formation gave biodegradable PLLA‐blend‐PCL materials with a wide variety of tensile properties with Young's modulus in the range of 0.07–1.4 GPa and elongation at break in the range 3–380%. Pore formation markedly increased the PLLA crystallinity of porous films, except for low PLLA/PCL ratio. Polymer blending as well as pore formation enhanced the enzymatic degradation of biodegradable polyester blends. Copyright © 2006 Society of Chemical Industry     

Confined crystallization morphology of poly(ϵ‐caprolactone) block within poly(ϵ‐caprolactone)–poly(l‐lactide) copolymers

The confined crystallization of poly(?‐caprolactone) (PCL) block in poly(?‐caprolactone)–poly(l ‐lactide) (PCL‐PLLA) copolymers was investigated using differential scanning calorimetry, polarized optical microscopy, scanning electronic microscopy and atomic force microscopy. To study the effect of crystallization and molecular chain motion state of PLLA blocks in PCL‐PLLA copolymers on PCL crystallization morphology, high‐temperature annealing (180 °C) and low‐temperature annealing (80 °C) were applied to treat the samples. It was found that the crystallization morphology of PCL block in PCL‐PLLA copolymers is not only related to the ratio of block components, but also related to the thermal history. After annealing PCL‐PLLA copolymers at 180 °C, the molten PCL blocks are rejected from the front of PLLA crystal growth into the amorphous regions, which will lead to PCL and PLLA blocks exhibiting obvious fractionated crystallization and forming various morphologies depending on the length of PLLA segment. On the contrary, PCL blocks more easily form banded spherulites after PCL‐PLLA copolymers are annealed at 80 °C because the preexisting PLLA crystal template and the dangling amorphous PLLA chains on PCL segments more easily cause unequal stresses at opposite fold surfaces of PCL lamellae during the growth process. Also, it was found that the growth rate of banded spherulites is less than that of classical spherulites and the growth rate of banded spherulites decreases with decreasing band spacing. © 2019 Society of Chemical Industry     

Part 7. Effects of poly(L‐lactide‐co‐ϵ‐caprolactone) on morphology,structure, crystallization,and physical properties of blends of poly(L‐lactide) and poly(ϵ‐caprolactone)

Blended films of poly(L ‐lactide) [ie poly(L ‐lactic acid)] (PLLA) and poly(?‐caprolactone) (PCL) without or mixed with 10 wt% poly(L ‐lactide‐co‐?‐caprolactone) (PLLA‐CL) were prepared by solution‐casting. The effects of PLLA‐CL on the morphology, phase structure, crystallization, and mechanical properties of films have been investigated using polarization optical microscopy, scanning electron microscopy, differential scanning calorimetry and tensile testing. Addition of PLLA‐CL decreased number densities of spherulites in PLLA and PCL films, and improved the observability of spherulites and the smoothness of cross‐section of the PLLA/PCL blend film. The melting temperatures (T_m) of PLLA and PCL in the films remained unchanged upon addition of PLLA‐CL, while the crystallinities of PLLA and PCL increased at PLLA contents [X_PLLA = weight of PLLA/(weight of PLLA and PCL)] of 0.4–0.7 and at most of the X_PLLA values, respectively. The addition of PLLA‐CL improved the tensile strength and the Young modulus of the films at X_PLLA of 0.5–0.8 and of 0–0.1 and 0.5–0.8, respectively, and the elongation at break of the films at all the X_PLLA values. These findings strongly suggest that PLLA‐CL was miscible with PLLA and PCL, and that the dissolved PLLA‐CL in PLLA‐rich and PCL‐rich phases increased the compatibility between these two phases. © 2003 Society of Chemical Industry     

Herbally derived polymeric nanofibrous scaffolds for bone tissue regeneration

Hydroxyapatite (HA), the bone mineral and Cissus quadrangularis (CQ), a medicinal plant with osteogenic activity, are attaining increasing interest as a potential therapeutic agent for enhanced bone tissue regeneration. In the present study a synergistic effect of these two agents were analyzed by fabricating PCL‐CQ‐HA nanofibrous scaffolds by electrospinning and compared with PCL‐CQ and PCL (control) nanofibrous scaffolds. Morphology, composition, hydrophilicity, and mechanical properties of the electrospun PCL, PCL‐CQ, PCL‐CQ‐HA nanofibrous scaffolds were examined by Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), Contact angle and Tensile tests, respectively. The response of human foetal osteoblast cells on these scaffolds were evaluated using MTS assay, alkaline phosphatase activity, alizarin red staining, and osteocalcin expression for bone tissue regeneration. While the observed cellular response to both groups of scaffolds was better than for the control PCL scaffold, the PCL‐CQ‐HA nanofibrous scaffolds provided the most favorable substrate for cell proliferation and mineralization. The results showed that PCL‐CQ‐HA nanofibrous scaffolds had appropriate surface roughness for the osteoblast adhesion, proliferation, and mineralization comparing with other scaffolds. The observed investigation of physicochemical and biological properties suggests that the CQ‐HA loaded PCL nanofibrous scaffolds serve as a potential biocomposite material for bone tissue engineering. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39835.     

Morphology,wettability, and mechanical properties of polycaprolactone/hydroxyapatite composite scaffolds with interconnected pore structures fabricated by a mini‐deposition system

A new mini‐deposition system (MDS) was developed to fabricate scaffolds with interconnected pore structures and anatomical geometry for bone tissue engineering. Polycaprolactone/hydroxyapatite (PCL/HA) composites with varying hydroxyapatite (HA) content were adopted to manufacture scaffolds by using MDS with a porosity of 54.6%, a pore size of 716 μm in the x‐y plane, and 116 μm in the z direction. The water uptake ratio and compressive modulus of PCL/HA composite scaffold increase from 8 to 39% and from 26.5 to 49.8 MPa, respectively, as the HA content increases from 0 to 40%. PCL/HA composite scaffolds have better wettability and mechanical properties than pure PCL scaffold. A PCL/HA composite scaffold for mandible bone repair was successfully fabricated with both interconnected pore structures and anatomical shape to demonstrate the versatility of MDS. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Preparation and characterization of PLLA/P(CL-b-LLA) blends by an in situ ring-opening polymerization

This paper describes a new reactive blending approach to improve the compatibility of poly(l-lactide) (PLLA) and poly(?-caprolacton) (PCL). For this purpose, the ring-opening polymerization of l-lactide (LLA) was carried out in the presence of PCL-OH (OH groups on one end). The P(CL-b-LLA) block copolymers were in situ formed during polymerization, and as a result, PLLA/P(CL-b-LLA) blends were obtained. The characterization of GPC and ¹H NMR verified the synthesis of PLLA/P(CL-b-LLA) blends. Furthermore, the ¹³C NMR spectroscopy showed that no transesterification reaction occurred to a significant extent during LLA polymerization process. The in situ formed P(CL-b-LLA) compatibilizes the phase separated structure of PCL domains in PLLA matrix. The size of PCL domains in PLLA matrix became much smaller than that in a solution blended sample. The average sizes of PCL domains are controllable in the level of sub-micron scale.