Self-heat recuperative fluidized bed drying of brown coal

Brown coal drying based on self-heat recuperation (SHR) technology which recovers effectively both latent and sensible heat was developed to reduce energy consumption which is required during drying. A fluidized bed dryer (SHR–FBD) with heat exchanger immersed inside the bed was adopted as the evaporator. To evaluate the energy efficiency of the proposed SHR–FBD system, a comparison to the available mechanical vapor recompression (MVR) based drying system concerning the effect of the fluidization velocity and bed aspect ratio to the required energy input for brown coal drying was conducted. From the results, the proposed SHR–FBD system was found to be able to drastically reduce the drying energy consumption at all evaluated fluidization velocities and bed aspect ratios. Numerically, the proposed system reduced the energy consumption to about 15% and 75% of that required in hot air and MVR drying systems.     

基于MVR热泵精馏的混合醇热集成分离工艺

机械蒸汽再压缩(MVR)热泵技术是把低品位的蒸汽通过压缩转变为高品位的蒸汽,循环用于热源的供热以减少能耗。而热集成技术则是合理的匹配冷热物流的换热,以提高物流的有效能利用率。鉴于精馏过程的高能耗和低热力学效率,本文以四元混合醇的分离为研究对象,把基于MVR热泵技术的热集成精馏工艺应用于该体系的分离,提出并研究了该体系带热集成与不带热集成各种MVR精馏工艺;以能耗和年总费用(TAC)为评价指标,采用Aspen Plus 软件对各分离工艺进行模拟与优化,确定各分离工艺的操作参数与设备参数。研究结果表明,与常规顺序分离工艺相比,MVR精馏工艺节约能耗50%以上,节约年总费用约61%。带热集成MVR精馏工艺与不带热集成MVR精馏工艺相比,在能耗和年总费用方面,优势相当,但前者热力学效率提高了约9.5%。     

Energy,exergy and economic analyses on heat pump drying of lignite

Abstract

Evaporative drying of lignite is an energy intensive process. In this study, the heat pump is integrated with a lignite drying system to decrease the energy consumption rate of lignite drying. The performance of heat pump drying is energetically and exergetically evaluated with developed models. Results show that the power consumption rates to dehydrate 1?kg of water from raw lignite in the heat pump drying system without and with lignite preheater are 660.82 and 585.62?kJ (kg H₂O)^?1, respectively. Exergetic analysis indicates that most exergy is destructed in the condenser and the evaporator in the heat pump drying. The case of lignite-to-electricity process (i.e., a lignite-fired power plant integrated with heat pump drying) is studied to examine additional benefits of heat pump drying to the downstream industrial processes that consume dried lignite. Thermodynamic and economic models are developed. Net efficiency of the lignite-to-electricity process can be increased by 1.4 and 1.57 percentage points for heat pump drying without and with lignite preheater, respectively. Preliminary economic analysis shows that the integration of heat pump drying without and with lignite preheater can earn additional 1.42 and 1.73 million USD, respectively. The influences of drying system and heat pump parameters are also analyzed.     

Energy and Quality Attributes of Combined Hot-Air/Infrared Drying of Paddy

The kinetics of combined hot-air/infrared thin-layer drying of paddy was studied. The mechanical quality aspects of paddy kernels dried at different drying conditions were evaluated in terms of percentage of cracked kernels and also required failure force obtained from bending tests. The well-known Artificial Neural Network (ANN) modeling technique was applied to predict the drying time, variations in paddy moisture content, the percentages of cracked kernels, and the values of required failure force of paddy at different drying conditions. The best ANN topologies, transfer functions, and training algorithms were determined for prediction of the mentioned parameters. In addition to the product quality aspects, the specific energy consumption (SEC) was estimated for all drying conditions. The results indicated that application of a low-intensity IR radiation (2000 W/m²), together with lower values of inlet air temperature (30°C) and moderate values of inlet air velocity (0.15 m/s), can effectively improve the final quality of paddy (as a heat-sensitive product) with a reasonable SEC.     

基于有机朗肯循环的混合二甲苯MVR热泵精馏工艺

常规机械蒸气再压缩（MVR）热泵精馏分离混合二甲苯工艺,存在压缩机电耗较大及塔顶压缩蒸气的显热未被利用等问题。有机朗肯循环（ORC）发电技术则可以将低温余热转化为电能以供压缩机使用,由此提出了ORC发电技术耦合MVR热泵和带乏汽回热循环（EGC）的ORC发电技术耦合MVR热泵两种精馏工艺应用于本体系的分离研究。以年总费用（TAC）和能耗为分离工艺的评价指标,系统净输出功和循环热效率作为ORC系统的评价指标,对以上两种耦合精馏工艺进行模拟与优化,并与常规MVR热泵精馏工艺进行比较与分析。研究结果表明,ORC发电技术耦合MVR热泵精馏工艺和带EGC的ORC发电技术耦合MVR热泵精馏工艺较常规MVR热泵精馏工艺均具有一定的节能和经济优势,可分别减少能耗9.64%和9.89%,节省TAC 3.19%和3.50%。     

Improvement in the Efficiency and Capacity of Chopped Spring Onion Drying

ABSTRACT

Appropriate strategy for drying chopped spring onion with a batchwise flat bed was investigated. Both experimental and simulated results such as product quality, drying capacity and energy consumption were taken into consideration. For simulation work, equations of drying parameters such as specific heat, equilibrium moisture content and thin layer drying were first developed from the lab-scale experimental results. Then a mathematical model including shrinkage for a batchwix flat bed drying was developed. The model was lested with the results obtained from a food processing plant with an acceptable accuracy. Appropriate drying strategy war then investigated. The approximate conclusion was that the drying should be devided into 3 stages. In the 1^st stage, drying air temperature was 80°C, specific air flow rate was 33.9 m³/min -kg dry matter and drying time was 0.5 h. In the 2nd stage, drying air temperature and drying time were kept unchanged but specific air flow rate was decreased to 13.5 m³/min - kg dry matter. In the final stage, drying air temperature was decreased to 67°C, specific air flow rate was also decreased to 6.8 m³/min - kg dry matter and drying time was approximately 1.7 h. Following the suggested strategy, specific primary energy cornsumption was 6.2 MJ/kg H₂O, drying time was 2.7 h and product quality was maintained. It was proven that energy consumption was approximalcly 70% of that of the present practice in the plant.     

Steam Dewatering of Filter Cakes in a Vertical Filter Press

Steam dewatering of filter cakes is recognized as a competitive alternative to conventional air drying and thermally assisted mechanical dewatering (TAMD). The main benefit of cake dewatering with high-pressure steam is that mechanical and thermal dewatering can be efficiently performed in a single process step. The target of this study was to determine the potential of a steam-dewatering technique for two industrial mineral suspensions. The first mineral, kaolin, was very difficult to dewater using conventional mechanical dewatering techniques, whereas the second one, ground calcium carbonate (GCC), represented only moderate resistance to filtration. The secondary objective was to compare the filterability of the original kaolin slurry with the same slurry treated with a coagulant (aluminum sulphate, Al₂(SO₄)₃ · 16H₂O). Four different kinds of experiments were performed: tests without any kind of cake dewatering, tests with air drying, tests with steam drying, and tests with both coagulation and steam drying. The obtained results show that steam dewatering is an efficient technique for achieving lower cake-moisture contents. Also, the positive influence of coagulation on the filtration capacity was found to be considerable in the case of kaolin. An approximate energy balance was created for the steam-drying process and the determined energy efficiencies were compared with those obtainable with an ideal thermal drier. The main conclusion from these comparisons is that steam drying can be effectively used instead of traditional thermal drying if the large energy losses can be reduced by proper insulation and heat recovery systems.     

Ultrasonic Convective Drying Kinetics of Clipfish During the Initial Drying Period

A hybrid drying system for high-intensity airborne ultrasound applied in convective drying was investigated for the drying of salted codfish (clipfish). Convective drying with ultrasonic assistance at 10, 20, and 30°C was compared to the same process without ultrasound. The Weibull model was used to model and investigate the drying behavior, and the effective diffusion in Fick's law was determined. The ultrasound decreased the drying time more at lower drying temperatures. The drying time was reduced by over 90% at a drying temperature of 10°C. For an industrial drying process at a temperature of 20°C, the drying time was reduced by 32.2%. The ultrasonic, convective drying of clipfish at a temperature of 20°C was faster than the same process without ultrasound at 30°C. The investigations showed a thermal effect for all products when ultrasound was applied. The specific moisture extraction ratio (SMER) in the investigated system was improved by 0.2 kg_water kWh^?1. The heat transfer coefficient in the system used was increased by 32.6% for a heating process in a separate investigation, whereas for a cooling process no increased heat transfer coefficient was determined. The thermal effect might (at least partially) explain the faster drying of ultrasonic-assisted convective drying. The results obtained demonstrate the potential of airborne ultrasound in convective drying with regard to drying time, energy consumption, and product quality. Documentation of the thermal effect should be included in future R&D on this topic.     

Application of the reaction engineering approach (REA) for modeling intermittent drying under time-varying humidity and temperature

A ‘good’ drying model is important for the design of dryer, evaluation of dryer performance and prediction of product quality. Among the available models, the reaction engineering approach (REA) is a lumped model, proven to be simple, robust and accurate to model drying of several materials. In this paper, the REA is implemented to model intermittent drying, which is usually practiced for saving energy consumption and maintaining product quality during drying, under time-varying drying air temperature and humidity, which is a challenging drying case to model. For this purpose, the equilibrium activation energy (ΔE_v,b) is defined according to the drying settings in each time period and combined with the relative activation energy (ΔE_v/ΔE_v,b) generated from the convective drying experimental data obtained under constant drying conditions. The mass and heat balances also implement the corresponding drying settings in each time period during the intermittent drying. The results indicate that the REA can describe both the moisture content and temperature profiles of the intermittent drying under time-varying drying air temperature and humidity well. The accuracy, simplicity and robustness of the REA for the intermittent drying under time-varying drying air temperature and humidity are proven here. This has provided a major and significant extension of the REA on modeling challenging drying cases.     

Influence of Combined Hot Air Impingement and Infrared Drying on Drying Kinetics and Physical Properties of Potato Chips

Air jet impingement combined with infrared drying (IMIRD) was developed as an alternative processing method to produce health-friendly potato chips in place of conventional deep-fat frying. This article investigates the effects of IMIRD compared to air jet impingement drying alone (IMD) and conventional convective drying (CCVD) on potato being processed as potato chips in term of drying characteristics, quality attributes (shrinkage, color, and hardness), and specific energy consumption (SEC) of the dryer. The experiments were carried out at three different air velocities (5, 10, 15 m/s) and infrared intensities (0.16, 0.27, and 0.33 W/cm²) at a fixed air temperature of 85°C. The experimental results show that the drying air velocity and infrared intensity had a significant effect on the moisture removal from potato slices. IMIRD, compared to IMD and CCVD, provided a higher drying rate, less shrinkage, lower hardness, and less color deterioration. An increase in air velocity at each infrared intensity caused a decrease in the total SEC value.     

Energy and Cost Estimation for Application of Chemical Heat Pump Dryer to Industrial Ceramics Drying

Abstract

In this article we estimate the potential of a new chemical heat pump dryer (CHPD) application to an industrial ceramics drying process from the viewpoints of energy and cost saving. A CaSO₄/H₂O/CaSO₄·1/2H₂O hydration/dehydration CHPD system and a CaO/H₂O/Ca(OH)₂ hydration/dehydration CHPD system were examined. The CHPD systems store heat and simultaneously release the increased amount of heat at different temperature levels by using two chemical heat pumps (CHP) in their heat-enhancement mode. Furthermore, we propose enhanced systems using chemical heat pipes (CHPipe) for their environmental and cost merits. As a result, the consumed energy and the cost of using the CHPD systems in the industrial ceramics drying process are found to decrease to less than half of the conventional drying process using gas-fired boilers. For example, the energy efficiency and the cost of the present drying process are 28.4% and 604 × 10³ (JPY/month) (JPY: Japanese Yen), respectively. The energy efficiency and the cost of the proposed CHPD system are found to be 79.7% and 216 × 10³ (JPY/month), respectively, based on our experiments.     

Efficient Energy Recovery with Wood Drying Heat Pumps

This article presents a 13-m³ wood dryer coupled with a 5.6-kW (compressor power input) heat pump. Drying tests with hardwood species such as yellow birch and hard maple were completed in order to determine the system's energy performance. Supplementary heating to compensate for the dryer heat losses was supplied using electrical coils or steam exchangers. The heat pump running profiles and dehumidification performance in terms of volumes removed and water extraction rates, coefficients of performance, and specific moisture extraction rates were determined for two all-electrical and two hybrid drying tests. The hardwood drying curves, share of the final moisture content, and final quality of the dried wood stacks, as well as total drying energy consumption and costs, were determined for each drying run. Finally, the total energy consumption of the drying cycles using a heat pump was compared with that of a conventional drying cycle using natural gas as a single energy source.     

Optimization of mixed flow dryers to increase energy efficiency

ABSTRACT

Agricultural driers are used for grain or maize drying with a limited annual operating time of about 100–1,000?h. To compensate the increasing costs of energy, permanent optimization of the drying process and the drying apparatus is necessary to increase energy efficiency. To attain higher energy efficiency, the drying potential of air should be fully utilized. The objective of this study is to investigate the medium flow in mixed flow dryers to identify adverse drying conditions. The investigation is based on experimental and numerical modeling and takes into account the bed motion (discrete element method) and the drying air flow (computational fluid dynamics). The results show superposition of a homogeneous air flow distribution with a particle flow profile, resulting in locally inhomogeneous residence time, different drying conditions, and ultimately uneven grain drying. Uneven drying is one of the main reasons for high energy consumption. Considering the results, a new mixed flow dryer geometry was developed which should equalize the drying process and thus be more energy efficient.     

Gas drying with ionic liquids

The gas drying technology with ionic liquids (ILs) was systematically studied ranging from the molecular level to industrial scale. The COSMO‐RS model was first used to screen the suitable IL and provide theoretical insights at the molecular level. Toward CO₂ gas dehydration, we measured the CO₂ solubility in single [EMIM][Tf₂N] and in the [EMIM][Tf₂N] + H₂O mixture, as well as the vapor‐liquid equilibrium (VLE) of [EMIM][Tf₂N] + H₂O system, to justify the applicability of UNIFAC model. Based on the thermodynamic study, the rigorous equilibrium (EQ) stage mathematical model was established for process simulation. The gas drying experiment with IL was also performed and the water content in gas product can be reduced to 375 ppm. It was confirmed that a less flow rate of absorbent, a higher CO₂ recovery ratio and a much lower energy consumption can be achieved with IL than with the conventional triethylene glycol (TEG). © 2017 American Institute of Chemical Engineers AIChE J, 64: 606–619, 2018     

Heat pump drying of grape pomace: Performance and product quality analysis

Abstract

Grape is one of the most popular fruits and various types of grape have been cultivated by more than 100 countries around the World. The wine and juice industry produces large quantities of by-product, called grape pomace (GP) as an industrial waste and it consists of skins, seeds, and stems. Various processes such as separation, pressing, drying, and milling are applied to benefit from its health effects. In this study, the seeded black GP Kalecik karas? (Vitis vinifera) was dried in an assisted closed cycle heat pump dryer (HPD) designed for high-moisture products to investigate the drying behaviors of GP. The effects of drying air temperature on bioactive properties and the drying characteristics of GP, and performance of system have discussed. Experiments were carried out at two different temperatures (45 and 50°C) and air velocity of 1.0 m/s. It was seen that increasing temperature decreased the drying time, coefficient of performance of whole system (COP_ws), and specific energy consumption (SEC). The average values of COP_ws for temperatures 45°C and 50°C were calculated as 3.28 and 3.10, respectively. The drying efficiencies (DE) at drying air temperature of 45°C and 50°C ranged from 2 to 12% and from 2 to 15%, respectively. Additionally, result of analysis has indicated that using a HPD at lower temperatures increases performance of system despite of higher energy input. Bioactive properties of dried samples at drying air temperature of 45°C are better than 50°C. The results show that drying the GP at low temperature is more suitable for product quality. For this reason, heat pump may be preferred. It shows that this drying system with higher capacities in the future can be recommended as an alternative technique in terms of energy usage, drying time, and performance of system.     

Bibliography of Literature on Fundamentals and Applications of Vibration in Particle Processing

This article describes the results of calculations of specific energy consumption, E _s , performed on a well-mixed fluidized bed dryer simulator. Exhaust air temperature–humidity loci required to yield a specified outlet moisture content were also determined. Most of the calculations related to solids whose drying rate was gas-film controlled. Six model drying curves were employed to examine the effects of drying rate and hygroscopicity in addition to the normal operating parameters. The results indicated that E _s was highest for slow-drying hygroscopic solids and lowest for fast-drying, non-hygroscopic solids. Specific energy consumption increased with decreasing bed temperature and outlet moisture content and with increasing heat loss but was independent of solids loading and airflow rate. For both the aforementioned solids and a much slower drying material (wheat), there was close agreement between the zero heat loss data and a single theoretical curve approximating the performance of an ideal adiabatic dryer. Distinct differences between the behavior of well-mixed and plug flow fluidized bed dryers are reported.     

Drying Kinetics of Tomato by Using Electric Resistance and Heat Pump Dryers

Abstract

Drying kinetics of tomato was studied by using heat pump dryer (HPD) and electric resistance dryers with parallel and crossed airflow. The performance of both systems was evaluated and compared and the influence of temperature, air velocity, and tomato type on the drying kinetics was analyzed. The use of HPD showed to be adequate in the drying process of tomatoes, mainly in relation to the conversion rate of electric energy into thermal energy. The heat pump effective coefficient of performance (COP_HT,EF) was between 2.56 and 2.68, with an energy economy of about 40% when compared to the drying system with electric resistance. The Page model could be used to predict drying time of tomato and statistical analysis showed that the model parameters were mainly affected by drying temperature.     

Mathematical Model of Fixed-Bed Drying and Strategies for Crumb Rubber Producing STR20

The objectives of this research were to investigate empirical and diffusion models for thin-layer crumb rubber drying for producing STR20 rubber using hot air temperatures of 110–130°C and to study the effect of drying parameters such as inlet drying temperature, volumetric flow rate, and initial moisture content on the quality of dried rubber. Finally, a mathematical drying model for predicting the drying kinetics of crumb rubber was developed using inlet air flow rates of 300–600 m³/min-m³ of crumb rubber (equivalent to 1.8–5.0 m/s) with the crumb rubber thickness fixed at 0.25 m. The average initial moisture content of samples was in the ranges of 40 and 50% dry basis while the desired final moisture content was below 5% dry basis. The results showed that the drying equation of crumb rubber was highly related to the inlet air temperature, while the drying constant value was not proportional to the initial moisture content. Consequently, the experimental data were formulated using nine empirical models and the analytical solution of moisture ratio equation was developed by Fick's law of diffusion. The result showed that the simulated data best fitted the logarithmic model and was in reasonable agreement to the experimental data. The effective diffusion coefficient of crumb rubber was in the range of 1.0 × 10^?9 to 2.15 × 10^?5 m²/s corresponding to drying temperatures between 40 and 150°C, respectively. The effects of air recirculation, inlet drying temperature, initial moisture contents, air flow rate, and drying strategies on specific energy consumption and quality of samples were reported. The experiments were conducted using two different drying strategies as follows: one-stage and two-stage drying conditions. The results showed that initial moisture content and air flow rates significantly affected the specific energy consumption and quality of rubber, while the volumetric air flow rate acted as dominant effect to the specific energy consumption. The simulated results concluded that the percentage of recycled air between 90 and 95% provided the lowest specific energy consumption as compared to the others.     

Electrohydrodynamic drying of sand

This study analyzes the electrohydrodynamic (EHD) drying characteristics of sand. Effect of process parameters (independent variables) including air speed, electrode gap, and applied voltage on drying kinetics and dependent variables including percentage water removed (%), Sherwood number, EHD number, and specific energy consumed (SEC) (kJ/kg) were also investigated using a central composite design and response surface methodology. Maximum drying was obtained for process parameter combination of air speed (2?m/s), electrode gap (1.5?cm), and applied voltage (15?kV). Air speed and electric field intensity (ratio of applied voltage to electrode gap) were found to have a significant effect on percentage water removed (%) and Sherwood number. In case of EHD number and SEC during the EHD drying process, all process parameters had a significant effect on them. The SEC increased with an increase in applied voltage but reduced with an increase in air speed at any given applied voltage suggesting that the EHD drying process, in combination with cross flow, will lead to higher drying rate and low energy consumption under ambient conditions. Regression models were also developed describing the relation between independent and dependent variables.