约束阻尼结构的改进准则法拓扑减振动力学优化

旨在为减振设计提供理论基础,研究约束阻尼结构拓扑动力学优化。以阻尼材料用量、振动特征方程、模态频率为约束,以多模态损耗因子倒数的加权和最小为目标,建立了约束阻尼结构拓扑优化模型,引入MAC因子控制结构的振型跃阶。在引入质量阵惩罚因子基础上推导出优化目标灵敏度。考虑到优化目标函数的非凸性,采用常规准则法(OC)寻优可能会使拓扑变量出现负值或陷入局部优化,故引入数学规划移动渐近技术对OC法进行改进,从而将全体拓扑变量纳入改进算法的优化迭代全过程。编程实现了约束阻尼板改进OC法拓扑动力学优化并对改进法性能进行了仿真。结果显示,改进算法可得到更合理的约束阻尼层构形,可使结构取得更佳减振效果。研究表明,改进算法迭代稳定性更好、寻优效率更高、更具全域最优性。     

Topology optimization of continuum structures with bi-modulus materials

Since the elasticity of bi-modulus materials is stress dependent, it is difficult to apply most conventional topology optimization methods to such bi-modulus structures owing to great computational expense. Therefore, this study employs the material-replacement method to improve the computational efficiency for topology optimization of bi-modulus structures. In this method, first, the bi-modulus material is replaced by two isotropic materials which have the same tensile or compressive modulus. Secondly, the isotropic materials for finite elements are determined by the local stress/strain states. The local elemental stiffness can be modified according to the current modulus and stress state of the element. Thirdly, the relative densities of elements, acting as the design variables, are updated using the optimality criterion method. Finally, the distributions of elemental densities and moduli are obtained for further applications. Several typical numerical examples are used to demonstrate the effectiveness of the proposed method.     

Topology optimization for nano‐scale heat transfer

We consider the problem of optimal design of nano‐scale heat conducting systems using topology optimization techniques. At such small scales the empirical Fourier's law of heat conduction no longer captures the underlying physical phenomena because the mean‐free path of the heat carriers, phonons in our case, becomes comparable with, or even larger than, the feature sizes of considered material distributions. A more accurate model at nano‐scales is given by kinetic theory, which provides a compromise between the inaccurate Fourier's law and precise, but too computationally expensive, atomistic simulations. We analyze the resulting optimal control problem in a continuous setting, briefly describing the computational approach to the problem based on discontinuous Galerkin methods, algebraic multigrid preconditioned generalized minimal residual method, and a gradient‐based mathematical programming algorithm. Numerical experiments with our implementation of the proposed numerical scheme are reported. Copyright © 2008 John Wiley & Sons, Ltd.     

基于变频率区间约束的结构材料优化设计

针对频率约束的结构材料优化问题,基于结构拓扑优化思想,提出变频率区间约束的结构材料优化方法。借鉴均匀化及ICM(独立、连续、映射)方法,以微观单元拓扑变量倒数为设计变量,导出宏观单元等效质量矩阵及导数,进而获得频率一阶近似展开式。结合变频率区间约束思想,获得以结构质量为目标函数、频率为约束条件的连续体微结构拓扑优化近似模型;采用对偶方法求解。通过算例验证该方法的有效性及可行性,表明考虑质量矩阵变化影响所得优化结果更合理。     

Topology optimization of material‐nonlinear continuum structures by the element connectivity parameterization

The application of the element density‐based topology optimization method to nonlinear continuum structures is limited to relatively simple problems such as bilinear elastoplastic material problems. Furthermore, it is very difficult to use analytic sensitivity when a commercial nonlinear finite element code is used. As an alternative to the element density formulation, the element connectivity parameterization (ECP) formulation is developed for the topology optimization of isotropic‐hardening elastoplastic or hyperelastic continua by using commercial software. ECP varies the stiffness of zero‐length linear elastic links that connect design domain‐discretizing finite elements. Unloading was not considered. But the advantages of ECP in material‐nonlinear problems were demonstrated: considerably simple analytic sensitivity calculation using a commercial code and simple link stiffness penalization regardless of nonlinear material behaviour. Copyright © 2006 John Wiley & Sons, Ltd.     

Topological optimization for the design of microstructures of isotropic cellular materials

The aim of this study was to design isotropic periodic microstructures of cellular materials using the bidirectional evolutionary structural optimization (BESO) technique. The goal was to determine the optimal distribution of material phase within the periodic base cell. Maximizing bulk modulus or shear modulus was selected as the objective of the material design subject to an isotropy constraint and a volume constraint. The effective properties of the material were found using the homogenization method based on finite element analyses of the base cell. The proposed BESO procedure utilizes the gradient-based sensitivity method to impose the isotropy constraint and gradually evolve the microstructures of cellular materials to an optimum. Numerical examples show the computational efficiency of the approach. A series of new and interesting microstructures of isotropic cellular materials that maximize the bulk or shear modulus have been found and presented. The methodology can be extended to incorporate other material properties of interest such as designing isotropic cellular materials with negative Poisson's ratio.     

约束阻尼板结构振动声辐射优化

根据经典薄板理论,建立约束阻尼板有限元模型,将其视作镶嵌于无限大刚性障板,利用Rayleigh积分法推导结构的辐射声功率及灵敏度表达式。以一阶峰值频率或频带激励下的声功率最小化为目标,约束阻尼材料体积分数为约束条件,建立拓扑优化模型,采用渐进优化算法,编制了优化计算程序,获得了约束阻尼材料的最优拓扑构型,并与全覆盖板及基板的辐射声功率进行了对比。研究表明：以声功率最小化为目标,对约束阻尼材料布局进行拓扑优化,能有效抑制结构的振动声辐射,为结构低噪声设计提供了重要的理论参考和技术手段。     

基于宏观性能的微观多孔材料拓扑优化

基于均匀化理论,建立与微观材料拓扑形状相关的宏观结构材料等效弹性张量。集成宏观结构所得到的位移场,推导出带有宏观结构力学特性的微观敏度。从而实现在给定材料体积分数前提下,以宏观结构最大刚度为目标,对材料微结构进行拓扑优化的目的。相关算例说明该方法可以得到与宏观力学性能相对应的各种微观结构蜂窝材料或复合材料。揭示了材料的微观结构拓扑形状依赖于宏观结构尺寸、载荷及初始边界条件等因素。