A multi-objective variable-fidelity optimization method for genetic algorithms

A novel variable-fidelity optimization (VFO) scheme is presented for multi-objective genetic algorithms. The technique uses a low- and high-fidelity version of the objective function with a Kriging scaling model to interpolate between them. The Kriging model is constructed online through a fixed updating schedule. Results for three standard genetic algorithm test cases and a two-objective stiffened panel optimization problem are presented. For the stiffened panel problem, statistical analysis of four performance metrics are used to compare the Pareto fronts between the VFO method, full high-fidelity optimizer runs, and Pareto fronts developed by enumeration. The fixed updating approach is shown to reduce the number of high-fidelity calls significantly while approximating the Pareto front in an efficient manner.     

Multiobjective optimization with an adaptive weight determination scheme using the concept of hyperplane

Finding an optimum design that satisfies all performances in a design problem is very challenging. To overcome this problem, multiobjective optimization methods have been researched to obtain Pareto optimum solutions. Among the different methods, the weighted sum method is widely used for its convenience. However, since the different weights do not always guarantee evenly distributed solutions on the Pareto front, the weights need to be determined systematically. Therefore, this paper presents a multiobjective optimization using a new adaptive weight determination scheme. Solutions on the Pareto front are gradually found with different weights, and the values of these weights are adaptively determined by using information from the previously obtained solutions' positions. For an n-objective problem, a hyperplane is constructed in n -dimensional space, and new weights are calculated to find the next solutions. To confirm the effectiveness of the proposed method, benchmarking problems that have different types of Pareto front are tested, and a topology optimization problem is performed as an engineering problem. A hypervolume indicator is used to quantitatively evaluate the proposed method, and it is confirmed that optimized solutions that are evenly distributed on the Pareto front can be obtained by using the proposed method.     

A method for simulation based optimization using radial basis functions

We propose an algorithm for the global optimization of expensive and noisy black box functions using a surrogate model based on radial basis functions (RBFs). A method for RBF-based approximation is introduced in order to handle noise. New points are selected to minimize the total model uncertainty weighted against the surrogate function value. The algorithm is extended to multiple objective functions by instead weighting against the distance to the surrogate Pareto front; it therefore constitutes the first algorithm for expensive, noisy and multiobjective problems in the literature. Numerical results on analytical test functions show promise in comparison to other (commercial) algorithms, as well as results from a simulation based optimization problem.     

Pareto optimization using the struggle genetic crowding algorithm

Many real-world engineering design problems involve the simultaneous optimization of several conflicting objectives. In this paper, a method combining the struggle genetic crowding algorithm with Pareto-based population ranking is proposed to elicit trade-off frontiers. The new method has been tested on a variety of published problems, reliably locating both discontinuous Pareto frontiers as well as multiple Pareto frontiers in multi-modal search spaces. Other published multi-objective genetic algorithms are less robust in locating both global and local Pareto frontiers in a single optimization. For example, in a multi-modal test problem a previously published non-dominated sorting GA (NSGA) located the global Pareto frontier in 41% of the optimizations, while the proposed method located both global and local frontiers in all test runs. Additionally, the algorithm requires little problem specific tuning of parameters.     

Two efficient algorithms for constructing almost even approximations of the Pareto front in multi-objective optimization problems

In this article, two algorithms are proposed for constructing almost even approximations of the Pareto front of multi-objective optimization problems. The first algorithm is a hybrid of the ε-constraint and Pascoletti–Serafini scalarization methods for solving bi-objective problems. The second is a modification of the successive Pareto optimization (SPO) algorithm for solving three-objective problems. In these algorithms, the MATLAB fmincon solver is used to solve single-objective optimization problems, which returns a local optimal solution. Some metrics are considered to evaluate the quality of approximations obtained by the suggested algorithms on six test problems, and their results are compared with other algorithms (normal constraint, weighted constraint, SPO, differential evolution, multi-objective evolutionary algorithm/decomposition–differential evolution, non-dominated sorting genetic algorithm-II and S-metric selection evolutionary multi-objective algorithm). Experimental results show that the proposed algorithms provide almost even approximations of the whole Pareto front, and better quality of approximation and CPU time compared with established algorithms.     

基于粒子群与聚类的多目标优化算法

针对粒子群优化算法容易陷入局部最优的问题,提出了一种基于粒子群优化与分解聚类方法相结合的多目标优化算法。算法基于参考向量分解的方法,通过聚类优选粒子策略来更新全局最优解。首先,通过每条均匀分布的参考向量对粒子进行聚类操作,来促进粒子的多样性。从每个聚类中选择一个具有最小聚合函数适应度值的粒子,以平衡收敛性和多样性。动态更新全局最优解和个体最优解,引导种群均匀分布在帕累托前沿附近。通过仿真实验,与4种粒子群多目标优化算法进行对比。实验结果表明,提出的算法在27个选定的基准测试问题中获得了20个反世代距离(IGD)最优值。     

Fuzzy multiobjective system reliability optimization by genetic algorithms and clustering analysis

System reliability optimization is a key element for a competitive and safe industrial plant. This paper addresses the multiobjective system reliability optimization in the presence of fuzzy data. A framework solution approach is proposed and based on four steps: defuzzify the data into crisp values by the ranking function procedure, the defuzzified problems are solved by the non-sorting genetic algorithms II and III (NSGA-II and NSGA-III), the Pareto fronts are compared by the spacing method for selecting the best one, and then the best Pareto front is reduced by the clustering analysis for helping the decision maker. A case study presented in the literature as a mono-objective redundancy allocation problem with fuzzy data is investigated in the present paper as multiobjective redundancy allocation and reliability-redundancy allocation problems show the applicability of the approach.     

矿物质粉体对砂浆及混凝土Cl-渗透性的影响

研究了不同水胶比、不同矿物质粉体掺量的砂浆和混凝土，经标准养护至56天、90天时的导电量。在相同水胶比和相同矿物质粉体掺量下，混凝土的导电量远低于砂浆的导电量。含矿物质粉体的砂浆及混凝土的导电量均低于基准砂浆及混凝土的导电量。导电量随水胶比的降低而降低，也随龄期的增长而降低。     

Optimal feeding profile in fed-batch bioreactors using a genetic algorithm

An optimal feeding profile for a fed-batch process was designed based on an evolutionary algorithm. Usually the presence of multiple objectives in a problem leads to a set of optimal solutions, commonly known as Pareto-optimal solutions. Evolutionary algorithms are well suited for deriving multi-objective optimisation since they evolve a set of non-dominated solutions distributed along the Pareto front. Several evolutionary multi-objective optimisation algorithms have been developed, among which the Non-dominated Sorting Genetic Algorithm NSGA-II is recognised to be very effective in overcoming a variety of problems. To demonstrate the applicability of this technique, an optimal control problem from the literature was solved using several methods considering the single-objective dynamic optimisation problem.     

Evolutionary multi-objective concurrent maximisation of process tolerances

Concurrent tolerancing which simultaneously optimises process tolerance based on constraints of both dimensional and geometrical tolerances (DGTs), and process accuracy with multi-objective functions is tedious to solve by a conventional optimisation technique like a linear programming approach. Concurrent tolerancing becomes an optimisation problem to determine optimum allotment of the process tolerances under the design function constraints. Optimum solution for this advanced tolerance design problem is difficult to obtain using traditional optimisation techniques. The proposed algorithms (elitist non-dominated sorting genetic algorithm (NSGA-II) and multi-objective differential evolution (MODE)) significantly outperform the previous algorithms for obtaining the optimum solution. The average fitness factor method and the normalised weighting objective function method are used to select the best optimal solution from Pareto optimal fronts. Two multi-objective performance measures namely solution spread measure and ratio of non-dominated individuals are used to evaluate the strength of the Pareto optimal fronts. Two more multi-objective performance measures namely optimiser overhead and algorithm effort are used to find the computational effort of the NSGA-II and MODE algorithms. Comparison of the results establishes that the proposed algorithms are superior to the algorithms in the literature.     

Local Pareto approximation for multi-objective optimization

The design process of complex systems often resorts to solving an optimization problem, which involves different disciplines and where all design criteria have to be optimized simultaneously. Mathematically, this problem can be reduced to a vector optimization problem. The solution of this problem is not unique and is represented by a Pareto surface in the objective function space. Once a Pareto solution is obtained, it may be very useful for the decision-maker to be able to perform a quick local approximation in the vicinity of this Pareto solution for sensitivity analysis. In this article, new linear and quadratic local approximations of the Pareto surface are derived and compared to existing formulas. The case of non-differentiable Pareto points (solutions) in the objective space is also analysed. The concept of a local quick Pareto analyser based on local sensitivity analysis is proposed. This Pareto analysis provides a quantitative insight into the relation between variations of the different objective functions under constraints. A few examples are considered to illustrate the concept and its advantages.     

基于统计提升准则的注塑工艺参数优化

为了同时改善生产平板型注塑制品时的总体收缩度和收缩均匀度,提出基于统计提升准则的注塑成型工艺参数的多目标优化方法,寻找平衡两个质量指标的优化设计.首先利用小规模的实验设计方法获得建模数据集,针对应用中存在的建模数据奇异点问题提出一种数据预处理方法,并依此分别建立两个指标的初始替代模型,用于代替优化过程中代价高昂的计算分析;随后依据Pareto统计提升准则寻找新的采样点加入建模数据集来重新建模,使寻优结果不断趋近真实的Pareto前沿.仿真结果表明,较常规的建模优化方法,本文提出的方法能使用较少的采样数据,显著地改善平板制品的收缩质量.对于HDPE材质的矩形制品,保压曲线先恒定后线性递减可以获得好的收缩均匀度,使用压力上限值恒定保压可以获得好的平均收缩度.     

Metamodel Assisted Evolutionary Algorithm for Multi-objective Optimization of Non-steady Metal Forming Problems

Multiobjective optimization problems are considered in the field of nonsteady metal forming processes, such as forging or wire drawing. The Pareto optimal front of the problem solution set is calculated by a Genetic Algorithm. In order to reduce the inherent computational cost of such algorithms, a surrogate model is developed and replaces the exact the function simulations. It is based on the Meshless Finite Difference Method and is coupled to the NSGAII Evolutionary Multiobjective Optimization Algorithm, in a way that uses the merit function. This function offers the best way to select new evaluation points: it combines the exploitation of obtained results with the exploration of parameter space. The algorithm is evaluated on a wide range of analytical multiobjective optimization problems, showing the importance to update the metamodel along with the algorithm convergence. The application to metal forming multiobjective optimization problems show both the efficiency of the metamodel based algorithms and the type of practical information that can be derived from a multiobjective approach.     

A multi-objective military system of systems architecting problem with inflexible and flexible systems: formulation and solution methods

System of systems (SoS) architecting is the process of bringing together and connecting a set of systems so that the collection of the systems, i.e., the SoS is equipped with a set of required capabilities. A system is defined as inflexible in case it contributes to the SoS with all of the capabilities it can provide. On the other hand, a flexible system can collaborate with the SoS architect in the capabilities it will provide. In this study, we formulate and analyze a SoS architecting problem representing a military mission planning problem with inflexible and flexible systems as a multi-objective mixed-integer-linear optimization model. We discuss applications of an exact and an evolutionary method for generating and approximating the Pareto front of this model, respectively. Furthermore, we propose a decomposition approach, which decomposes the problem into smaller sub-problems by adding equality constraints, to improve both the exact and the evolutionary methods. Results from a set of numerical studies suggest that the proposed decomposition approach reduces the computational time for generating the exact Pareto front as well as it reduces the computational time for approximating the Pareto front while not resulting in a worse approximated Pareto front. The proposed decomposition approach can be easily used for different problems with different exact and heuristic methods and thus is a promising tool to improve the computational time of solving multi-objective combinatorial problems. Furthermore, a sample scenario is presented to illustrate the effects of system flexibility.     

Adapting the Hypervolume Quality Indicator to Quantify Trade‐offs and Search Efficiency for Multiple Criteria Decision Making Using Pareto Fronts

When choosing a best solution based on simultaneously balancing multiple objectives, the Pareto front approach allows promising solutions across the spectrum of user preferences for the weightings of the objectives to be identified and compared quantitatively. The shape of the complete Pareto front provides useful information about the amount of trade‐off between the different criteria and how much compromise is needed from some criterion to improve the others. Visualizing the Pareto front in higher (3 or more) dimensions becomes difficult, so a numerical measure of this relationship helps capture the degree of trade‐off. The traditional hypervolume quality indicator based on subjective scaling for multiple criteria optimization method comparison provides an arbitrary value that lacks direct interpretability. This paper proposes an interpretable summary for quantifying the nature of the relationship between criteria with a standardized hypervolume under the Pareto front (HVUPF) for a flexible number of optimization criteria, and demonstrates how this single number summary can be used to evaluate and compare the efficiency of different search methods as well as tracking the search progress in populating the complete Pareto front. A new HVUPF growth plot is developed for quantifying the performance of a search method on completeness, efficiency, as well as variability associated with the use of random starts, and offers an effective approach for method assessment and comparison. Two new enhancements for the algorithm to populate the Pareto front are described and compared with the HVUPF growth plot. The methodology is illustrated with an optimal screening design example, where new Pareto search methods are proposed to improve computational efficiency, but is broadly applicable to other multiple criteria optimization problems. Copyright © 2012 John Wiley & Sons, Ltd.     

Bi-objective partial flexible job shop scheduling problem: NSGA-II,NRGA, MOGA and PAES approaches

This paper deals with a problem of partial flexible job shop with the objective of minimising makespan and minimising total operation costs. This problem is a kind of flexible job shop problem that is known to be NP-hard. Hence four multi-objective, Pareto-based, meta-heuristic optimisation methods, namely non-dominated sorting genetic algorithm (NSGA-II), non-dominated ranked genetic algorithm (NRGA), multi-objective genetic algorithm (MOGA) and Pareto archive evolutionary strategy (PAES) are proposed to solve the problem with the aim of finding approximations of optimal Pareto front. A new solution representation is introduced with the aim of solving the addressed problem. For the purpose of performance evaluation of our proposed algorithms, we generate some instances and use some benchmarks which have been applied in the literature. Also a comprehensive computational and statistical analysis is conducted in order to analyse the performance of the applied algorithms in five metrics including non-dominated solution, diversification, mean ideal distance, quality metric and data envelopment analysis are presented. Data envelopment analysis is a well-known method for efficiently evaluating the effectiveness of multi-criteria decision making. In this study we proposed this method of assessment of the non-dominated solutions. The results indicate that in general NRGA and PAES have had a better performance in comparison with the other two algorithms.     

A hybrid evolutionary graph-based multi-objective algorithm for layout optimization of truss structures

In this paper a new graph-based evolutionary algorithm, gM-PAES, is proposed in order to solve the complex problem of truss layout multi-objective optimization. In this algorithm a graph-based genotype is employed as a modified version of Memetic Pareto Archive Evolution Strategy (M-PAES), a well-known hybrid multi-objective optimization algorithm, and consequently, new graph-based crossover and mutation operators perform as the solution generation tools in this algorithm. The genetic operators are designed in a way that helps the multi-objective optimizer to cover all parts of the true Pareto front in this specific problem. In the optimization process of the proposed algorithm, the local search part of gM-PAES is controlled adaptively in order to reduce the required computational effort and enhance its performance. In the last part of the paper, four numeric examples are presented to demonstrate the performance of the proposed algorithm. Results show that the proposed algorithm has great ability in producing a set of solutions which cover all parts of the true Pareto front.     

Modelling and optimisation of energy-efficient U-shaped robotic assembly line balancing problems

Within U-shaped assembly lines, the increase of labour costs and subsequent utilisation of robots has led to growing energy consumption, which is the current main expense of auto and electronics industries. However, there are limited researches concerning both energy consumption reduction and productivity improvement on U-shaped robotic assembly lines. This paper first develops a nonlinear multi-objective mixed-integer programming model, reformulates it into a linear form by linearising the multiplication of two binary variables, and then refines the weight of multiple objectives so as to achieve a better approximation of true Pareto frontiers. In addition, Pareto artificial bee colony algorithm (PABC) is extended to tackle this new complex problem. This algorithm stores all the non-dominated solutions into a permanent archive set to keep all the good genes, and selects one solution from this set to overcome the strong local minima. Comparative experiments based on a set of newly generated benchmarks verify the superiority of the proposed PABC over four multi-objective algorithms in terms of generation distance, maximum spread, hypervolume ratio and the ratio of non-dominated solution.     

A hybrid approach combining modified artificial bee colony and cuckoo search algorithms for multi-objective cloud manufacturing service composition

This paper proposes a multi-objective hybrid artificial bee colony (MOHABC) algorithm for service composition and optimal selection (SCOS) in cloud manufacturing, in which both the quality of service and the energy consumption are considered from the perspectives of economy and environment that are two pillars of sustainable manufacturing. The MOHABC uses the concept of Pareto dominance to direct the searching of a bee swarm, and maintains non-dominated solution found in an external archive. In order to achieve good distribution of solutions along the Pareto front, cuckoo search with Levy flight is introduced in the employed bee search to maintain diversity of population. Furthermore, to ensure the balance of exploitation and exploration capabilities for MOHABC, the comprehensive learning strategy is designed in the onlooker search so that every bee learns from the external archive elite, itself and other onlookers. Experiments are carried out to verify the effect of the improvement strategies and parameters’ impacts on the proposed algorithm and comparative study of the MOHABC with typical multi-objective algorithms for SCOS problems are addressed. The results show that the proposed approach obtains very promising solutions that significantly surpass the other considered algorithms.