The development of anti-heat stress clothing for construction workers in hot and humid weather

The purpose of this study was to develop anti-heat stress clothing for construction workers in hot and humid weather. Following DeJonge’s functional clothing design process, the design situation was explored, including clothing fabric heat/moisture transporting properties and UV protection and the aspects of clothing ergonomic design (mobility, convenience, and safety). The problem structure was derived from the results of the surveys in three local construction sites, which agreed well with the task requirements and observations. Specifications were consequently described and 30 commercially available fabrics were identified and tested. Fabric testing data and design considerations were inputted in S-smart system to predict the thermal functional performance of the clothing. A new uniform prototype was developed and evaluated. The results of all measurements suggest that the new uniform which incorporated fabrics with superior heat/moisture transporting properties and loose-fitting design could reduce the workers’ heat stress and improve their comfort and work performance.

Practitioner Summary:

The construction workers’ uniform currently used in Hong Kong during summer was unsatisfactory. Following DeJonge’s functional clothing design process, an anti-heat stress uniform was developed by testing 30 fabrics and predicting clothing thermal functional performance using S-smart system. The new uniform could reduce the workers’ heat stress and improve their comfort and work performance.     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

A THEORETICAL STUDY ON ADAPTIVE QUALITY CONTROL SYSTEMS

This paper is a study of an adaptive quality control system from a viewpoint of quality goal. The main purpose is to introduce a conceptual framework for setting up quality goals which are in accordance with the external environment and internal capacity of quality control systems. We apply a mathematical general systems approach.

The results of our paper are summarized as follows:

1)As important decision-making in adaptive QCS, the decision-making for estimalion of fitness and examination of attainability are proposed and formalized mathematically.

2)A refinement process is formalized in which models are revised according to the changes of market.

3)Basic steps for setting quality goals are obtained which are based on the above formalization.     

Push Notifications in Diet Apps: Influencing Engagement Times and Tasks

Background: Smartphones have reached levels of popularity and penetration where they are now suitable for use in population health interventions. A key feature of smartphones is push notification or in app messaging service, which can be used to alert users to messages or instructions pertaining to an installed app. Little evidence exists as to the persuasive power of these messages.

Method: We conducted a 24-week live user evaluation of push notifications used in a behavior-based mobile app for a meal replacement program to understand the role of push notifications in persuading users to engage with self-monitoring tasks.

Results: User perception of the prompts were verified through questionnaires, which in conjunction with the interaction logs show that users were tolerant of multiple daily prompts. The decline in compliance to the tasks set, however, shows that while the participants did not object to receiving prompts, they were less likely to respond to them as the study progressed.

Conclusions: Push notifications and user tasks are appropriate mechanisms to engage users with mobile technology in the short term.     

A shirt containing multistage phase change material and active cooling components was associated with increased exercise capacity in a hot,humid environment

Recent advances in clothing design include the incorporation of phase change materials (PCM) and other active cooling components (ACC) to provide better body heat dissipation. The purpose of this study was to determine the effect of wearing a shirt containing multistage PCM/ACC on exercise capacity at low (5.0), moderate–high (7.5) and extreme (9.0) levels of the physiological strain index (PSI). Fourteen individuals tested two shirts (control vs. cooling) during 45-min of interval running in a hot, humid (35 ± 1 °C; 55 ± 6% RH) environment. The cooling shirt resulted in an 8% improvement in exercise capacity at a PSI of 7.5 (p < 0.05). The observed increase in exercise capacity would likely translate to a significant improvement in exercise performance. More research is needed to determine a best practice approach for the use of cooling clothing as a counter to exercise-induced heat exposure.

Practitioner Summary: In this report, we demonstrate that when forced to exercise in a hot, humid environment, an individual’s exercise capacity may increase by as much as 8% when wearing a shirt composed of multistage phase change material and active cooling components.     

DISCRETE EVENT-DYNAMIC SYSTEMS FOR MODELING DYNAMIC VALUED NETS

The last few years have seen the development of Discrete Event-Dynamic Net Systems^1,2 as instruments for modeling complex systems. They are able to achieve the following objectives:

—formality of the modeling methodology

—ability to model static and dynamic aspects

—ability to pass between levels of differently rich structures by morphisms

—uniform representation of the communication process as

—an information process

—a decision process and

—a control process

—homogeneity of the representation and modeling methods

—ability to derive qualitative and quantitative statements.

The foundation is provided by a Discrete Event-Dynamic Net System which includes the axiomatic declaration of general Petri nets. In order to calculate the structural and dynamic aspects, so-called Petri net machines are developed. It is shown that this approach can even be used to treat the following aspects:

—use of time during the process

—increase of costs during the generation and transportation of information

—augmentation, evaluation and transformation of information objects.

Recursive formulas are derived and some examples calculated.     

The Proactive and Preventive Privacy (3P) Framework for IoT Privacy by Design

The Problem

Internet of Things (IoT) is providing new services and insights by sensing contextual data but there are growing concerns of privacy risks from users that need immediate attention.

The Reason

The IoT devices and smart services can capture Personally Identifiable Information (PII) without user knowledge or consent. The IoT technology has not reached the desired level of maturity to standardize security and privacy requirements.

The Solution

IoT Privacy by Design is a user-centric approach for enabling privacy with security and safety as a ‘win-win’ positive outcome of IoT offerings, irrespective of business domain. The Proactive and Preventive Privacy (3P) Framework proposed in this paper should be adopted by the IoT stakeholders for building trust and confidence in end users about IoT devices and smart services.     

A METHODOLOGY OF COORDINATION IN JAPANESE COMPANY-WIDE QUALITY CONTROL

In the practice of Japanese company-wide quality control, some tools which help us to coordinate company-wide activities are developed. One of the main functions of these tools is to organise the diversified information related to the company-wide activities

This report discusses the basic recognition underlying the use of these tools, and presents on a conceptual level an essential philosophy and methodology of coordinating company-wide activities

The basic idea of this report is to make an additional subsystem which helps us to organize the diversified information of activities in order to coordinate activities easily.     

Book reviews

Electronic Finance Law Chris Reed, 1993 Hemel Hempstead: Woodhead‐Faulkner. 450 pp. £50.00

Introduction to Computer Law, 2nd Edn David I. Bainbridge, 1993 London: Pitman £18.99

Deontic Logic in Computer Science: normative system specification John‐Jules CH. Meyer & Roel J. Wieringa, 1993 London: John Wiley £34.95, xiv + 317pp.     

Book reviews

Computer Software: legal protection in the United Kingdom Henry Carr & Richard Arnold, 1992 London: Sweet & Maxwell, 2nd ed, xv + 312 pp., £45.00 (hardback)

Advanced Information Systems for Lawyers V. Mital & L. Johnson, 1992 London: Chapman & Hall. pp. 306, £35.00

Law of Contract Laurence Koffman & Elizabeth MacDonald, 1992 London: Fourmat Publishing, 430 pp., paperback £22.50

The Electronic Media and the Transformation of Law M. Ethan Katsh, 1991 Oxford: Oxford University Press. £13.95     

Zero-correlation linear attack on reduced-round SKINNY

At ToSC 2019, Ankele et al. proposed a novel idea for constructing zero-correlation linear distinguishers in a related-tweakey model. This paper further clarifies this principle and gives a search model for zero-correlation distinguishers. As a result, for the first time, the authors construct 15-round and 17-round zero-correlation linear distinguishers for SKINNY-n-2n and SKINNY-n-3n, respectively, which are both two rounds longer than Anekele et al.’s. Based on these distinguishers, the paper presents related-tweakey zero-correlation linear attacks on 22-round SKINNY-n-2n and 26-round SKINNY-n-3n, respectively.     

A primal-dual approximation algorithm for the k-prize-collecting minimum vertex cover problem with submodular penalties

In this paper, we consider the k-prize-collecting minimum vertex cover problem with submodular penalties, which generalizes the well-known minimum vertex cover problem, minimum partial vertex cover problem and minimum vertex cover problem with submodular penalties. We are given a cost graph G=(V,E;c) and an integer k. This problem determines a vertex set S\subseteq V such that S covers at least k edges. The objective is to minimize the total cost of the vertices in S plus the penalty of the uncovered edge set, where the penalty is determined by a submodular function. We design a two-phase combinatorial algorithm based on the guessing technique and the primal-dual framework to address the problem. When the submodular penalty cost function is normalized and nondecreasing, the proposed algorithm has an approximation factor of 3. When the submodular penalty cost function is linear, the approximation factor of the proposed algorithm is reduced to 2, which is the best factor if the unique game conjecture holds.     

Normative data on the one-handed static pull strength of a Chinese population and a comparison with American data

We assess the one-handed static pull strength of a Chinese population and compare it to that of an American sample. Fifty men and 50 women in five age groups were asked to exert their maximum one-handed pull strength in three pulling directions (across, front and side) and from four pulling heights (61 cm, 76 cm, waist height and above-shoulder height). The results showed that women had less pull strength than men under all of the conditions tested. The front and side pulling resulted in the greatest pull strength, with a decrease detected when the pulling height was increased. The American sample exhibited greater strength than the Chinese. Body mass and men’s handgrip force were also associated with the pull strength. These variables should be taken into account in the development of tasks related to one-handed pulling.

Practitioner summary:

In this paper, we report a laboratory-based experiment conducted to assess the one-handed static pull strength of a Chinese population and compare the results with those of an American population. The variables associated with pull strength included gender, pulling direction, pulling height, race, body mass and men’s handgrip force.     

ON THE REPRESENTATION OF ACTIVITY ARRAYS†

A general methodology for empirical investigaiion is described which consists of: (i) the selection of a system on the object of investigation with respect to the purpose and constraints of investigation, (ii) the gathering of data for the system and organizing them in the form of activity arrays, (iii) the processing of the data through which certain time-invariant properties representing the data are determined, (iv) the interpretation of these time-invariant data representations from the standpoint of the purpose of investigation.

It is shown that each activity array yields many different representations. A procedure through which the various representations can be obtained is described that consists of: (1) the selection of a mask specifying a pattern for sampling the data, (2) the sampling procedure through which certain types of time-invariant relations are determined for the given mask, (3) the simplification of the time-invariant relations, if necessary or desirable.

A basis for the objective comparison of possible representations and ascertainment of the representation with the highest possible degree of determinism, subject to given constraints, is developed.

The procedure is applicable to both well defined and fuzzy variables of any scale. No classification into input and output variables is required, although it is not prohibited.     

AUTONOMOUS PLANNING UNDER UNCERTAINTY: PLANNING MODELS

This paper presents a system-theoretic approach to the general problem of autonomous planning under uncertainty. The autonomous planning problem involves an automaton (an autonomous machine) which interacts with an environment via a set of unreliable control and sensing operations. The task assigned to the automaton is to plan and execute a sequence of control and sensing operations which changes the state of the environment in a desirable way.

The paper introduces the concept of an Uncertainty Machine which models the propagation of the information from the environment to the automaton during the execution of the plans. Based on the concept of an uncertainty machine, mathematical expressions are presented for the active-sensing, the passive-sensing and the control (sensorless) entropies of an arbitrary execution instance. These entropies are shown to be useful measures of the automaton's ability to utilize its control and sensing resources in reducing its uncertainty.

In a companion paper,⁷ the concept of an uncertainty machine is utilized to synthesize strategies which enable the automaton to actively explore the environment.     

THEORY OF CYBERNETIC AND INTELLIGENT MACHINE BASED ON LIE COMMUTATORS

Many attempts^{1, 7, 8, 35} have been made to overcome the limit imposed by the Turing Machine³⁴ to realise general mathematical functions and models of (physical) phenomena.

They center around the notion of computability.

In this paper we propose a new definition of computability which lays the foundations for a theory of cybernetic and intelligent machines in which the classical limits imposed by discrete algorithmic procedures are offset by the use of continuous operators on unlimited data. This data is supplied to the machine in a totally parallel mode, as a field or wave.

This theory of machines draws its concepts from category theory, Lie algebras, and general systems theory. It permits the incorporation of intelligent control into the design of the machine as a virtual element. The incorporated control can be realized in many (machine) configurations of which we give three:

a) a quantum mechanical realization appropriate to a possible understanding of the quantum computer and other models of the physical microworld,

b) a stochastic realization based on Kolmogorov-Gabor theory leading to a possible understanding of generalised models of the physical or thermodynamic macroworld, and lastly

c) a classical mechanical realization appropriate lo the study of a new class of robots.

Particular applications at a fundamental level are cited in geometry, mathematics, biology, acoustics, aeronautics, quantum mechanics, general relativity and. Markov chains. The proposed theory therefore opens a new way towards understanding the processes that underlie intelligence.     

Hand anthropometry survey of rural farm workers in south-eastern Nigeria

The importance of hand anthropometry as it relates to design of hand tools particularly for farm workers have been established; however, anthropometric data for this group of agricultural workers have continued to remain scarce. A survey of hand anthropometry relevant in design of agricultural hand tools was carried out on 200 male and 100 female adult farm workers in south-eastern Nigeria. Comparison of the male and female data obtained showed that male dimensions were higher than that recorded for the females. The hand anthropometric data of the male and female farm workers were compared with that of other populations but no clear distinction was observed. It was however clear that the following hand dimensions, 2nd Joint to root digit 3 and width at tip digit 3 recorded for Nigerian farm workers were highest and lowest, respectively, compared to other populations.

Practitioner Summary:

Hand anthropometric data relevant in design of hand tools have continued to remain scarce particularly for farm workers. Hand anthropometry survey of farm workers carried out in south-eastern Nigeria revealed higher dimensions for males than females; however, no clear distinction was observed in comparison with other populations.     

Distress and worry as mediators in the relationship between psychosocial risks and upper body musculoskeletal complaints in highly automated manufacturing

As a result of changes in manufacturing including an upward trend in automation and the advent of the fourth industrial revolution, the requirement for supervisory monitoring and consequently, cognitive demand has increased in automated manufacturing. The incidence of musculoskeletal disorders has also increased in the manufacturing sector. A model was developed based on survey data to test if distress and worry mediate the relationship between psychosocial factors (job control, cognitive demand, social isolation and skill discretion), stress states and symptoms of upper body musculoskeletal disorders in highly automated manufacturing companies (n = 235). These constructs facilitated the development of a statistically significant model (RMSEA 0.057, TLI 0.924, CFI 0.935). Cognitive demand was shown to be related to higher distress in employees, and distress to a higher incidence of self-reported shoulder and lower back symptoms. The mediation model incorporating stress states (distress, worry) as mediators is a novel approach in linking psychosocial risks to musculoskeletal disorders.

Practitioners’ Summary

With little requirement for physical work in many modern automated manufacturing workplaces, there is often minimal management focus on Work-Related Musculoskeletal Disorders (WRMSDs) as important occupational health problems. Our model provides evidence that psychosocial factors are important risk factors in symptoms of WRMSD and should be managed.     

A comfort assessment of existing cervical orthoses

Purpose: Identify location and intensity of discomfort experienced by healthy participants wearing cervical orthoses.

Method: Convenience sample of 34 healthy participants wore Stro II, Philadelphia, Headmaster, and AspenVista^® cervical orthoses for four-hour periods. Participants reported discomfort level (scale 0–6) and location.

Results: Participants reported mean discomfort for all orthoses over the four-hour test between ‘a little discomfort’ and ‘very uncomfortable’ (mean discomfort score = 1.64, SD = 1.50). Seven participants prematurely stopped tests due to pain and six reported maximum discomfort scores. Significant linear increase in discomfort with duration of wear was found for all orthoses. Significantly less discomfort was reported with Stro II than Headmaster and Philadelphia. Age correlated with greater perceived discomfort. Orthoses differed in the location discomfort was experienced.

Conclusion: Existing cervical orthoses cause discomfort influenced by design and duration of wear with orthoses’ design the more significant factor. This work informed the design of a new orthosis and future orthoses developments.

Practitioner Summary: The purpose of this study was to gain greater knowledge about the discomfort caused by wearing of existing neck orthoses in order to inform the design and development of a new neck orthosis. This study gathers empirical data from a surrogate population and concludes that orthosis design is more influential than the duration of wear.     

A PROBABILISTIC-PROPOSITIONAL FRAMEWORK FOR THE O-THEORY INTERSECTION RULE

In a previous paper, O-theory (OT), a hybrid uncertainly theory was proposed for dealing with problems of uncertainty in logical inference. The foundations of one of the concepts introduced, the OT intersection operator, are explored in this paper. The developments rely solely on set-theoretic and probability notions which are the distinguishing features of this operator's role in the theory.

The OT intersection rule has as its basis Dempster's rule of combination which ties it closely to Dempster-Shafer theory. In this paper the OT rule will be shown to be based more fundamentally on classical probability theory. To demonstrate this, possibility sets are interpreted in a propositional framework and mass assignments are converted to the probabilistic form originally proposed by Dempster. These changes are used to show that the OT intersection rule can be derived from first principles in a probability theory of propositions. Since this derivation does not require conditional probabilities, it can be used as alternative to Bayes' theorem for combining conjunctive information consistently. Dempster's rule will be shown to be a special case of the OT intersection rule. It too will be derived using probability theory.

The formal connection between mass and probability presented originally by Dempster and used here in a propositional framework, makes distinctions between DST and probability theory less consequential. DST is still seen to be a generalization of the concept of probability, but it is also seen to fit within a probabilistic-propositiona) framework.