A new suction device for microsurgery

A new suction device for microsurgical procedures is presented. This device is made of soft, compliant PVC, which enables all fluids to be evacuated from the surgical field without damaging the surrounding soft tissue. The device is designed with front and radial ports that allow placement onto the blood vessel or nerve while the anastomosis is being performed. There is a tapered end providing the surgeon with fine control of the suction. Unlike other bulky suction devices, this one readily fits into the operative field without inhibiting operative procedures. It also readily fits varying sizes of conventional Frazier-type tips. The device has been used in over 100 microsurgical procedures and it has served well.     

Mandibular fracture after endosseous implant placement in conjunction with inferior alveolar nerve transposition: a patient treatment report

A patient with a severely atrophic right posterior mandible had three endosseous implants placed in conjunction with transposition of the inferior alveolar nerve. Three weeks following implant placement surgery, the patient experienced a spontaneous fracture of the mandible involving the two anterior implants. The two implants were removed, and the fracture was treated with open reduction and fixation with titanium mesh. The fracture healed, and the posterior implant integrated. This report suggests that the buccolingual and superior-inferior position of the mandibular canal can increase the possibility of mandibular fracture by increasing the size of the buccal cortical plate that is removed to expose the nerve during surgery.     

The use of osteotomes for sinus augmentation at the time of implant placement

The placement of endosseous dental implants is often hampered by the loss of alveolar bone. In the posterior maxilla, the presence of the maxillary sinus and less-dense bone present additional obstacles to successful implant placement. Existing methods of subantral augmentation require extensive surgical manipulation, often including a second surgical site for harvesting autogenous bone. The development of surgical osteotomes has facilitated the placement of implants in areas of minimal alveolar bone height in the posterior maxilla. This article describes the osteotome technique for sinus augmentation at the time of implant placement and presents a short-term evaluation of 34 implants placed in 18 patients.     

Vascularized bone flaps versus nonvascularized bone grafts for mandibular reconstruction: an outcome analysis of primary bony union and endosseous implant success

We present a patient with a lesion of the mesial frontal cortex, including the supplementary motor areas bilaterally, who on clinical examination revealed no spontaneous movements, although neurophysiological examination indicated integrity of the corticospinal tract to thenar and tibialis anterior muscles bilaterally. The patient was alert, speech was hesitant, and he was able to move his hands only on command. The role of the supplementary motor areas in planning, setting, and execution of skillful voluntary movements has been previously established by direct cortical electrical stimulation and studies of regional cerebral blood flow. The findings in our patient support the role of the supplementary motor areas in initiating movements. The presence of motor evoked potentials after acute insults to the brain is considered to be associated with a good functional outcome. This is in contrast to our patient who did not show improvement in motor performance, despite preserved motor evoked potentials. Hence, in the case of bilateral lesions to the supplementary motor areas sparing the corticospinal tract, the presence of motor evoked potentials may not predict functional recovery.     

Guided bone regeneration for immediate non-submerged implant placement using bioabsorbable materials in Beagle dogs

The aim of the present study was to evaluate the combined application of different bioabsorbable materials for healing of residual peri-implant defects after placement of non-submerged implants into fresh extraction sockets. Second and third mandibular premolars were extracted from 10 Beagle dogs, the coronal part of the distal sockets were surgically enlarged and this was followed by immediate placement of specially designed hollow-screw non-submerged dental implants. For each animal, the coronal peri-implant defects were further treated with one of the 4 following procedures: 1) no treatment, control site; 2) grafting with porous hydroxyapatite (HA); 3) collagen membrane tightly secured around the implant and over the defect and 4) grafting with HA covered with a collagen membrane. After 16 weeks of healing, specimens were removed from the mandibule and prepared for a histomorphometric evaluation. The bone-to-implant contact length (BIC) was measured and compared amongst the different treatment modalities. In the defect area, the irregular bone regeneration was similar between all the treatment procedures (P > 0.10). In the sites covered with a collagen membrane alone, the total BIC (47%) was greater than in control sites (28.7%, P < 0.05) or sites grafted with HA (22.2%, P < 0.02). Total BIC in sites treated with the HA-membrane combination (43%) was only significantly different from sites treated with HA (P < 0.05). It is concluded that the use of bioabsorbable materials results in a limited increase of osseointegration when used in conjunction with immediate placement of non-submerged implants, although the principle of the one stage surgical approach can be maintained.     

Anterior aesthetic considerations for the placement and restoration of nonsubmerged endosseous implants

Nonsubmerged endosseous dental implants should be considered when planning optimal anterior implant rehabilitation. Detailed diagnostic records are a necessity, along with preoperative and preprosthetic treatment plans that are designed to address the unique challenges of anterior restorations. This paper discusses these concerns and presents two case reports which utilize some of the techniques that can be incorporated into achieving predictable anterior aesthetic rehabilitation using a single-stage implant. The learning objective of this article is to familiarize the reader with those challenges and techniques.     

Influence of bone quality on stress distribution for endosseous implants

The present study examined the influence of bone quality on the transmission of occlusal forces for endosseous dental implants. Employing the finite element method, the study modeled a 3.75 x 10-mm threaded implant placed in a 12 x 11 x 8-mm section of bone. By varying the elastic parameters assigned to the bone elements, four bone quality categories were established. A load of 100 N was applied at the occlusal surface of the restoration at a 30 degrees angle to the vertical axis of the implant. Maximum von Mises stress concentrations (sigma Emax) were observed to be located in the marginal bone at the coronal aspect of the implant fixture in all four cases. Values of sigma Emax were 13.7 MPa for type 1 bone, 15.8 MPa for type 2 bone, 20.1 MPa for type 3 bone, and 26.5 MPa for type 4 bone. Magnitude of the stresses in bone was strongly correlated (r = 0.997) with computed displacement of the implant system. This analysis predicts that placement of implants in bone with greater thickness of the cortical shell and greater density of the core will result in less micromovement and reduced stress concentration, thereby increasing the likelihood of fixture stabilization and tissue integration.     

Single-stage surgery for implant placement: a retrospective study

Single-stage implant placement surgery offers patients a number of advantages. These include reduced cost and time commitments and greater comfort, function, and convenience. This article reports on the results of using a single-stage technique with 58 patients fitted with 240 implants. No implant failures were detected in any patients prior to the final attachment of a Dolder bar. Among the 27 patients and the 125 implants followed for a longer period of time, 99.2% exhibited no signs of implant mobility or pain. Indicators of gingival health and oral hygiene ranged in quality from acceptable to ideal.     

Simplified guide for precise implant placement: a technical note

Loss of heterozygosity (LOH) at chromosome band 10q23 occurs frequently in a wide variety of human tumors. A recently identified candidate tumor suppressor gene, PTEN located on 10q23, is mutated in multiple advanced cancers. To explore whether PTEN is associated with human squamous cell carcinoma of the head and neck (SCCHN), DNAs from both normal muscle and tumor tissue in 19 SCCHN were used for detecting LOH at chromosome 10q23 and mutational analysis of PTEN by direct polymerase chain reaction (PCR)-DNA sequencing. LOH at 10q23 was identified in 6/15 SCCHN. Mutation of PTEN was identified in 3/19 SCCHN. Of these 3 patients, 2 had stage IV disease; the third patient, with recurrent, metastatic and stage III disease, showed a 36 bp germline heterozygous deletion within intron 7. Furthermore, a missense mutation at codon 501 (TCT --> TTT: Ser --> Phe) in exon 8 was also found in tumor from the same patient. Our results suggest that PTEN may play a role in the genesis of some SCCHNs.     

Complications of motility peg placement for the hydroxyapatite orbital implant

PURPOSE: The hydroxyapatite implant is an ocular motility implant designed to provide natural movement of the artificial eye. The movement of the prosthesis is maximized when the implant is coupled to the prosthesis via a peg. The purpose of this study is to determine the complications of the hydroxyapatite motility peg and the factors related to those complications. DESIGN: Retrospective review of 47 cases over 5 years. METHODS: A retrospective review was performed on all cases of hydroxyapatite motility peg placement. The technique of hydroxyapatite and peg placement, follow-up details, and complications of the peg were recorded. RESULTS: The complications of peg placement included peg extrusion in 26% (12 of 47), nonspecific conjunctivitis in 6% (3 of 47), audible click in 6% (3 of 47), temporary excessive conjunctival edema in 4% (2 of 47), and temporary excessive postoperative pain in 4% (2 of 47). There were no cases of infection, persistent pain, persistent edema, or discharge at peg site. The median time interval from peg placement to extrusion was 16 months (range, 1-52 months). The only statistically significant factor related to peg extrusion was age over 50 years (P = 0.04). There was a trend toward peg extrusion with use of a nonsleeved peg (versus sleeved peg) (P = 0.10). The extrusion rate was 32% (12 of 38) for nonsleeved pegs and 0% (0 of 9) for sleeved pegs. Factors unrelated to peg extrusion were patient sex, prior ocular surgery or radiotherapy, presence of giant papillary conjunctivitis, time interval from enucleation to peg placement, and degree of implant vascularization on magnetic resonance imaging. Of the 12 nonsleeved pegs that extruded, a sleeved peg system was subsequently successfully placed in 5 patients, a nonsleeved peg in 1 patient, and 6 patients remained without a peg system. CONCLUSIONS: Hydroxyapatite motility pegs have relatively few complications except for extrusion. The rate of extrusion can be minimized by employing a sleeved peg rather than a nonsleeved peg system.     

Reconstruction of the extremely resorbed mandible with interposed bone grafts and placement of endosseous implants. A preliminary report on outcome of treatment and patients'' satisfaction

An analysis method for volatile organic compounds in blood based on purge-and-trap extraction coupled with gas chromatography-Fourier transform infrared spectroscopy (GC-FTIR) was developed. The sample volume was 5 mL, and the internal standard was diethyl ketone. The chromatographic separation was carried out on a PoraPLOT Q capillary column, and the effluent was first directed to the FTIR and then to a flame ionization detector (FID). FTIR identification limits were measured for 27 volatile organic compounds; the criteria for the limit were that the first hit-list position should be obtained against the Sadtler library, which contains 3240 spectra, and that the correlation value should exceed 0.5. It was required that the peak be seen by FID but not necessarily by a Gram-Schmidt chromatogram. The FTIR identification limits, ranging from 0.01 mg/L for ethyl acetate, methylethyl ketone, and sevoflurane to 24 mg/L for methanol, generally allowed the detection of volatile-substance exposure at a lower level than is acutely toxic. Quantitative calibration data were presented for selected substances, based on the FID response, which shows that the method is also amenable to quantitative analysis. The throughput of the method without additional automation is five samples per day, the purge-and-trap stage being the limiting factor.     

The extracted tooth pontic--provisional replacement during bone graft and implant healing

When tooth extraction is required, a provisional restoration may be utilized as an interim prosthesis during bone graft and implant healing. The selection of provisional replacement of the anterior teeth following extraction may have a direct influence on the success of the definitive tooth replacement. This article describes a technique for using the extracted tooth or a denture tooth as an interim prosthesis during bone graft and implant healing. This method of provisionalization offers several advantages, including no adjacent tooth preparation, natural appearance, and retention of the papillae.     

Prosthetic considerations in the fabrication of surgical stents for implant placement

The utilization of surgical stents/templates for implant placement is of significant importance to the success of the definitive prosthesis. However, major conceptual differences exist between surgical stents designed for implant-supported crowns and bridges and those designed for implant overdentures. In addition, various types of surgical stents exist within each group. In either case, optimizing the prosthetic result by customization of the stent should be a major consideration in the fabrication process. The design of the stent must account for several treatment conditions, including position of the implant, the tissue present, and the anticipated prosthesis. The teaching objective of this article is to present the prosthetic considerations in the fabrication and customization of surgical stents. The article compares the two groups and offers specific guidelines for the fabrication of surgical stents for the various types of restorations within each group.     

Mandibular onlay grafting using prefabricated bone grafts with primary implant placement: an experimental study in minipigs

The aim of this experimental study was to evaluate the use of prefabricated autogenous bone grafts as onlay grafts to the mandible. Excess bone of 10 x 12 x 40 mm was produced inside blocks of pyrolyzed bovine bone under a polylactic membrane coverage on the outside of the mandible in 15 adult G?ttingen minipigs. After 5 months, this bone was harvested and transferred to the premolar region of the mandibular body in 10 animals. Onlay grafts of mandibular bone were used as controls for the transplanted prefabricated grafts. All grafts were fixed by primary placement of one titanium implant each. Five animals served as ungrafted controls. Evaluation was performed after 3 months and 5 months, respectively. Two animals were lost to evaluation, and one scaffold became infected. Eleven of the remaining 12 scaffolds showed sufficient bone ingrowth for grafting. Three months after transplantation, bone volume of the prefabricated grafts was almost completely preserved, with only minimal resorption in the superficial pores of the scaffolds, while the control grafts exhibited partial resorption. The titanium implants, which had been placed at the time of only grafting, exhibited direct bone-implant contact. Five months after grafting, all titanium implants showed complete osseointegration, with direct bone-implant contact. The grafted bone exhibited a significant increase in bone density by appositional bone formation. The control grafts were nearly completely resorbed at that time.     

Comparison of intraoral donor sites for onlay grafting prior to implant placement

The influence of flecainide (0.1, 0.5, 1.0, and 2.0 micrograms/mL) on atrioventricular (AV) conduction was studied in neonatal and adult perfused rabbit hearts using extracellular bipolar surface electrograms and premature atrial and ventricular pacing. Flecainide produced a concentration and rate-related increase in the steady-state nodal conduction (AHmin) and an increase in slow AH conduction (AHmax) in both age groups. The drug produced significant increases in the refractory periods of the atrium, AV node, His-Purkinje system, and ventricular myocardium. The neonatal refractory periods were significantly greater at lower or the same drug concentrations than those of the adult. The neonatal Wenckebach cycle length was significantly greater with a lower concentration of drug (0.5 microgram/mL) than was the adult Wenckebach cycle length. The His-Purkinje system steady-state conduction time (HVmin) was increased by a lower concentration of drug in the neonate (0.5 microgram/mL) as compared with 2.0 micrograms/mL in the adult. These data show that across a wide range of AV conduction parameters, the neonatal preparations responded to a lower concentration of flecainide than did the adult preparations. These findings may, in part, be the basis for the reported greater efficacy of the drug in children than in adults.     

A general dentist's guide to proper dental implant placement from an oral surgeon's perspective

This article is designed to help the general or restorative dentist more accurately predict proper implant placement by using palatal stents for the maxilla and lingual stents for the mandible, as well as parallel pin guides and vacupress stents, which help ensure both precise location and angulation. Because these stents and pin guides are easily used during surgery, the restorative dentist can prescribe with accuracy the exact position where the implants should be placed. To further the predictability of implant placement, especially in the anterior maxilla, an abutment can actually be placed into the pilot hole in the bone and checked with a vacupress stent before making the implant socket.