MEMS技术制作的螺线管微电感

考虑和分析了螺线管微电感的几何结构参数对微电感性能的影响,利用MEMS技术制作了四种不同几何结构的高性能射频螺线管微电感。这些微电感采用铜线圈,以减小线圈寄生电阻,且制作工艺简单,成本低,与IC相兼容。测试结果表明,微电感在较宽的工作频率范围内具有较高的Q值,在频率分别为6 GHz,4.4 GHz,5.8 GHz和5.6 GHz,微电感Q峰值为38,19.1,24.1和21.9,所对应的电感量为1.81 nH,1.07 nH,1.03 nH和1.17 nH。     

纳米晶磁芯螺线管微电感的模拟研究

为了研制小尺寸、高性能的片上微电感,采用Fe基非晶薄带经退火得到的纳米晶带材作为磁芯材料,并对其高频磁导率进行了测试。对纳米晶磁芯螺线管微电感建立了物理模型,模拟分析了结构参数对微电感性能的影响。结果表明:在1~10MHz频率范围内,所设计的微电感的电感量L在2~12μH,品质因数Q值在1.3~2.3,非常适用于DC-DC变换器等功率电子器件。     

高性能螺线管微电感的制作

利用MEMS技术制作了高性能的空芯螺线管型射频微机械电感.这种微电感采用铜线圈以减小线圈寄生电阻,整个微电感的面积是880μm×350μm,与平面螺旋型微电感相比,有效地节省了芯片面积.测试结果表明,微电感在较宽的工作频率范围内具有高Q值,微电感最大Q值为38(@6GHz),对应的电感量为1.82nH.     

高性能螺线管微电感的制作

利用MEMS技术制作了高性能的空芯螺线管型射频微机械电感.这种微电感采用铜线圈以减小线圈寄生电阻,整个微电感的面积是880μm×350μm,与平面螺旋型微电感相比,有效地节省了芯片面积.测试结果表明,微电感在较宽的工作频率范围内具有高Q值,微电感最大Q值为38(@6GHz),对应的电感量为1.82nH.     

铁芯和空芯螺线管型微电感器的性能比较

为了满足RF电路、电源电路、微执行器和微传感器等领域对高性能和工艺简单的电感器的广泛需求，用正、负胶结合的微加工工艺，在硅基片上制作了有坡莫合金铁芯的和在玻璃基片上没有铁芯的、其它结构和参数均相同的两种螺线管型微电感器，测试了它们在1－40MHz频率范围的电感、电阻和Q因子，并进行了比较和讨论。其结果与现有理论知识相一致。实验证明了具有坡莫合金铁芯的螺线管型微电感器在低于30MHz的频率下使用更有意义。而无铁芯螺线管型微电感器还可以用于更高频率的场合。     

MEMS磁芯螺线管微电感的制作工艺研究

采用微机电系统(MEMS)技术制作了磁芯螺线管微电感,该技术包括UV-LIGA、干法刻蚀技术、抛光和电镀技术等。研制的微电感大小为1500μm×900μm×100μm,线圈匝数为41匝,宽度为20μm,线圈之间的间隙为20μm,高深宽比为5∶1。测试结果表明:在1～10MHz频率下,其电感量为0.408～0.326μH,Q值为1.6～4.2。     

采用MEMS技术制作的螺线管电感

采用微机电系统技术制作了螺线管电感.为了获得高电感量和Q值,采用UV-LIGA、干法刻蚀、抛光和电镀技术,研制的电感大小为1500μm×900μm×70μm,线圈匝数为41匝,宽度为20μm,线圈之间的间隙为20μm,高深宽比为3.5:1.测试结果表明电感量最大值为6.17nH,Q值约为6.     

新型悬空结构射频微电感的制作与测试

利用MEMS(Micro Electro-Mechanical System:微机电系统)工艺中的牺牲层技术制作了一种新型悬空结构微电感,在此悬空结构中,微电感的线圈制作在与衬底平行的平面上,线圈与衬底之间有立柱支撑;此新型微电感的制作工艺流程简单,与集成电路工艺相兼容,且其高频性能较好。并对此结构微电感的性能进行了测试,测试频率范围在0.05~10 GHz之间,结果表明:当悬空结构微电感的悬空高度为20 靘,工作频率在3~5 GHz范围内时,其电感量达到4 nH,其Q值最大可达到22。     

用于声光移频的声表面波谐振器

针对一种喇曼型声表面波声光器件的设计需求,设计制作出一种能够满足喇曼-奈斯衍射要求的、低损耗、高Q值声表面波谐振器。利用耦合模(COM)理论仿真谐振器的性能,建立谐振器的COM模型,求解COM方程,提取出COM参数。利用COM软件仿真设计谐振器的结构参数,设计的谐振器中心频率为78.028MHz,Q值为10 428,插入损耗为-6.153dB。利用微加工技术加工制作出声表面波谐振器,用矢量网络分析仪对其性能进行测试,得到谐振器实际中心频率为78.34MHz,插入损耗为-11.273dB,Q值为6 465.7,该谐振器能够满足喇曼型声表面波声光器件的应用需求。     

基于LTCC工艺的低通滤波器设计与实现

为了实现具有高Q值电容电感的小型化滤波器,本文采用低温共烧陶瓷(LTCC)工艺分别构建了垂直螺旋式电感和垂直直插式电容,利用电容电感的参数提取公式并结合HFSS软件进行优化仿真,获得具有高Q值的电容电感模型,并根据此模型来设计一款DC-500MHz小型化低通滤波器。最终经过实际测试结果表明该低通滤波器性能为：在0~500MHz插入损耗优于-0.5dB,回波损耗优于-18dB,带外抑制在1GHz处有-30dB,在1.5GHz处有-50dB。 关键词：低通滤波器;低温共烧陶瓷工艺;高Q值;小型化     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks