In situ formation of thermosensitive P(NIPAAm-co-GMA)/PEI hydrogels

A strategy for in situ chemical gelation of poly(N-isopropylacrylamide-co-glycidyl methacrylate)/polyethylenimine (P(NIPAAm-co-GMA)/PEI) polymers has been demonstrated. Two kinds of P(NIPAAm-co-GMA) with epoxy pendant groups were prepared. When the solution of P(NIPAAm-co-GMA) was mixed with branched polyethylenimine (PEI, M_w 800), the cross-linking between the epoxy functional groups and amines, a type of nucleophilic substitution reaction occurred. The corresponding gelation process was confirmed via rheology. The in situ formed hydrogels were studied via scanning electric microscopy (SEM) and the equilibrium swelling ratio, swelling kinetics, and temperature response kinetics were examined. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermosensitive hydrogels.     

Radiation crosslinking and sorption properties of hydrogels based on 1‐vinyl‐2‐pyrrolidone,hydroxyethyl methacrylate,and their copolymers

This work has been concerned with the synthesis of the hydrogels of poly (vinyl pyrrolidone) (NVP), poly (hydroxy ethylmethacrylate) (HEMA), and their copolymer under the effect of gamma radiation in the presence of N,N‐methylenebisacryl‐amide (MBAm) as a crosslinking agent. The effect of the different factors that may affect the gelation and yield product, such as solvent composition and irradiation dose, was investigated. The formed hydrogels were characterized in terms of swelling in water and different organic solvents, X‐ray diffraction (XRD), and IR spectroscopic analysis. The sorption capability of these hydrogels towards some commercial basic and acid dyesstuffs was also studied. The results showed that a solvent mixture composed of equal contents of water and methanol is the most suitable to afford the minimum sol fraction and the highest yield product at a minimal irradiation dose of 10 kGy. It was observed that NVP hydrogel displayed the highest swelling in water, alcohols, and dimethyformamide of ～1300% and a lower tendency to swell in nonpolar solvents. The results showed that HEMA hydrogel has a high affinity to absorb basic dyes while NVP has a tendency for acid dyes. Also, the sorption of either the basic or acid dyes by the different hydrogels was found to greatly depend on the concentration of dye in solution and the mass of the used hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3274–3280, 2004     

Rapid swelling and deswelling of thermoreversible hydrophobically modified poly(N-isopropylacrylamide) hydrogels prepared by freezing polymerisation

Rapid response thermally sensitive hydrophobically modified poly(N-isopropylacrylamide) hydrogels have been synthesised successfully using a two-step polymerisation method, the initial polymerisation being carried out at 20 °C, followed by polymerisation at −28 °C for 24 h. The results show that the swelling/deswelling rates of poly[N-isopropylacrylamide-co-(di-n-propylacrylamide)] P(NIPA-co-DPAM) hydrogels prepared by two-step polymerisation are much faster than for the same type of hydrogels prepared via conventional methods (30 °C for 24 h), i.e. the time for the former xerogel to absorb 70 and 90 wt% is just 30 and 240 min, respectively, compared to the latter xerogel which takes 1600 and 2500 min to absorb the same amounts of water. During deswelling (shrinking), the hydrogel loses 95 wt% water in 1 min, compared to a timescale for the corresponding cross-linked copolymers prepared by conventional methods of about 5 h for 50 wt% water loss. Scanning electron microscopy, and flotation experiments together with swelling ratio studies reveal that the polymeric network of the former hydrogel is characterised by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the latter hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Synthesis and properties of thermosensitive, crown ether incorporated poly(N-isopropylacrylamide) hydrogel

A crown ether derivative (4′-allyldibenzo-18-crown-6, CE) was covalently incorporated into the network of temperature sensitive poly(N-isopropylacrylamide) (PNIPA) hydrogels by copolymerization in a mixed solvent of water and tetrahydrofuran (H₂O/THF). The poly(N-isopropylacrylamide-co-4′-allyldibenzo-18-crown-6) (poly(NIPA-co-CE)) hydrogels exhibited dramatically faster deswelling rates than normal PNIPA hydrogels at a temperature (50 °C) above their lower critical solution temperatures. The effect of the solvent component ratio in the mixed solvent during the copolymerization on the swelling properties of the poly(NIPA-co-CE) hydrogel was investigated. The thermosensitive poly(NIPA-co-CE) hydrogels have potential applications in the extraction of cations and separation of chiral drugs.     

Influence of the swelling history on the swelling kinetics of stimuli-responsive poly[(N-isopropylacrylamide)-co-(methacrylic acid)] hydrogels

The influence of the swelling history on the swelling behavior of poly[(N-isopropylacrylamide)-co-(methacrylic acid)] P[(N-iPAAm)-co-(MAA)] random copolymers hydrogels synthesized by free radical polymerization in solution of N-iPAAm and MAA comonomers crosslinked with tetraethylene glycol dimethyl acrylate (TEGDMA) has been studied. The swelling behavior under pH 7 at 18, 29, 39 and 49 °C of this series of copolymers, previously soaked either at pH 2 or 7 has been investigated. The swelling kinetics of these two series of samples displays different behavior as function of the composition and temperature. However, the equilibrium swelling values only show slight dependences on the previous soaking pH and temperature. When samples are soaked at pH 7, then the swelling at pH 7 follows a first order kinetics, irrespective of the copolymer composition or the temperature at which the experiment has been carried out. In this case, the swelling process is very fast and depends only slightly on temperature. The first order rate constant increases with the MAA content in the hydrogel. Furthermore, the swelling rate of copolymer hydrogels soaked at pH 2, show strong dependence on composition and temperature. They follow an autocatalytic swelling kinetics due to the disruption of hydrogen bond arrangements. An initial slow water uptake is followed by an acceleration process, in which water molecules inside the gel help the next water molecules to come in. Two rate constants, a first-order rate constant and an autocatalytic one have been obtained from the kinetics analysis. They have revealed different temperature dependence which may be due to a balance between hydrophobic and hydrogen bond interactions. The temperature dependence of the swelling kinetics is stronger and more complex for copolymers treated under pH 2 than for copolymers soaked under pH 7.     

NVP接枝壳聚糖水凝胶的合成与溶胀性能

合成了N-乙烯基吡咯烷酮（NVP）接枝壳聚糖（CHI）水凝胶,讨论了NVP/CHI、引发剂、交联剂、聚合温度、乙酸浓度等因素对接枝率及凝胶溶胀性能的影响,NVP∶CHI为6时,接枝率达到300%以上. 溶胀温度、pH值、盐浓度等对凝胶溶胀性能的影响实验表明,凝胶表现出温度敏感性,在40 ℃出现最大平衡溶胀率,并观察到一级相转变;在中性或弱酸性介质中溶胀性能较好;与PVP凝胶相比,NVP接枝CHI凝胶表现出反聚电解质效应. 溶胀动力学研究表明,在溶胀前期,CHI含量较高时,凝胶趋向于非Fick溶胀,说明除了溶剂扩散外,凝胶网络链段弛豫、水分子与凝胶网络间及凝胶高分子链段间相互作用对凝胶溶胀性能的影响至关重要;CHI含量较高时则趋向于Fick溶胀.     

Synthesis and Gelation Characteristics of Photo-Crosslinkable Star Poly(ethylene oxide-co-lactide-glycolide acrylate) Macromonomers

Viability of encapsulated cells in situ crosslinkable macromonomers depends strongly on the minimum concentration of polymerization initiators and monomers required for gelation. Novel 4-arm poly(ethylene oxide-co-lactide-glycolide acrylate) (SPELGA) macromonomers were synthesized and characterized with respect to gelation, sol fraction, degradation, and swelling in aqueous solution. SPELGA macromonomers were crosslinked in the absence of N-vinyl-2-pyrrolidone (NVP) monomer to produce a hydrogel network with a shear modulus of 27±4 kPa. The shear modulus of the gels increased by 170-fold as the macromonomer concentration was increased from 10 to 25 wt%. Sol fraction ranged between 8-18%. Addition of only 0.4 mol% NVP to the polymerization mixture increased modulus by 2.2-fold from 27±4 (no NVP) to 60±10 kPa. The higher modulus was attributed to the dilution effect of polymer chains in the sol, by delaying the onset of diffusion-controlled reaction, and cross-propagation of the growing chains with network-bound SPELGA acrylates. Degradation of SPELGA gels depended on water content and density of hydrolytically degradable ester groups.     

Rapid pH/temperature-responsive cationic hydrogels with dual stimuli-sensitive grafted side chains

Dual temperature- and pH-sensitive comb-type grafted cationic hydrogels are successfully synthesized by grafting polymeric chains with freely mobile ends, which are composed of both N-isopropylacrylamide (NIPAM) segments and N,N-dimethylamino ethyl methacrylate (DMAEMA) segments, onto the backbone of crosslinked poly(NIPAM-co-DMAEMA) networks. Equilibrium and dynamic swelling/deswelling properties of the prepared hydrogels responding to pH and/or temperature are investigated. The prepared hydrogels demonstrate a lower critical solution temperature (LCST) at about 34 °C and a pK_a value at about pH 7.3. At lower pH and lower temperature, both the swelling degree and the swelling rate of the comb-type grafted hydrogel are larger than those of the normal-type crosslinked hydrogel. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogel exhibits a more rapid deswelling rate than that of the normal-type hydrogel in response to a pH jump from 2.0 to 11.0 at a fixed temperature. The volume changes of the poly(NIPAM-co-DMAEMA) hydrogels are acute in a series of fixed buffer solutions with an abrupt increase of environmental temperature from 18 °C to a temperature higher than the LCST. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogels show quite fast shrinking behaviors in response to simultaneous dual temperature and pH stimuli. Drug-release in vitro from the prepared poly(NIPAM-co-DMAEMA) hydrogels is carried out when the environmental temperature and pH are changed synchronously. The results show that the model drug Vitamin B₁₂ is released much more rapidly from the comb-type grafted hydrogel than that from the normal-type hydrogel. The proposed dual temperature/pH-sensitive comb-type grafted cationic poly(NIPAM-co-DMAEMA) hydrogel in this study may find various potential applications, e.g., for fabricating rapid-response smart sensors, actuators, and chemical/drug carriers and so on.     

Synthesis and characterization of pH- and temperature-sensitive hydrogel of N-isopropylacrylamide/cyclodextrin based copolymer

A reactive β-Cyclodextrin (β-CD) based monomer carrying vinyl carboxylic acid functional groups was synthesized via reaction of β-CD with maleic anhydride (MAH) in N,N-dimethylformamide (DMF) at 80 °C. By copolymerization of the monomer with N-isopropylacrylamide (NIPA), a novel hydrogel, poly(NIPA-co-MAH-β-CD) with pH and temperature sensitivities plus molecular inclusion function, was obtained using free radical polymerization in aqueous solution. The hydrogel's composition was determined by element analysis and infrared spectroscopy. Equilibrium swelling ratio (ESR) of hydrogels was tested under different environment of pH, temperature and ionic strength. The results indicated that ESR of hydrogels presents marked variations following the change of experimental conditions used.     

Effect of degree of cross-linking on swelling and on drug release of low viscous chitosan/poly(vinyl alcohol) hydrogels

In the present work, a series of cross-linked LVCS/PVA hydrogels with various feed compositions were prepared using glutaraldehyde as cross-linking agent. The prepared hydrogels were used for dynamic and equilibrium swelling studies. The swelling behavior of these hydrogels was investigated as functions of effect of pH, polymeric compositions and degree of cross-linking. Swelling studies were performed in 0.05 M USP phosphate buffer solutions of varying pH 1.2, 5.5, 6.5 and 7.5. Results showed that swelling increased by increasing PVA contents in the structure of hydrogels in solutions of higher pH values. This is due to the presence of more hydroxyl groups (–OH) in the PVA structure. On the other hand, by increasing LVCS contents, swelling increased in a solution of acidic pH and it is due to ionization of amino groups (–NH₂), but this swelling was not significant. Swelling of hydrogels was decreased with increase in cross-linking ratio due to tighter hydrogel structure. Porosity and sol–gel fraction were also investigated. It was found that with increase in LVCS and PVA contents porosity and gel fraction increased, whereas by increasing glutaraldehyde content gel fraction increased and porosity decreased. Diffusion coefficient (D) and network parameters, i.e., the average molecular weight between cross-links (M _C), solvent interaction parameters (χ), polymer volume fraction in swollen state (V _2S) and cross-linked density (q) were calculated using Flory–Rehner theory. Selected samples were loaded with model drug diphenhydramine HCl. The release of diphenhydramine HCl was studied for 12 h period in 0.05 M USP phosphate buffer solutions of varying pH 1.2, 5.5 and 7.5. It was observed that drug release increased with increasing PVA contents in the hydrogels, while release of drug decreased as the ratio of cross-linking agent increased in the hydrogel structure owing to strong physical entanglements between polymers. The release mechanisms were studied by fitting experimental data to model equations like zero order, first order, Higuchi and Peppas. Results showed that the kinetics of drug release from hydrogels in buffer solutions of pH 1.2, 5.5 and 7.5 was mainly non-fickian diffusion. Hydrogels were characterized by Fourier transform infrared and X-ray diffraction to confirm the structure and study the crystallinity of hydrogel, respectively.     

Poly(N-isopropylacrylamide) hydrogels with improved shrinking kinetics by RAFT polymerization

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of N-isopropylacrylamide (NIPAM) in the presence of N,N-methylenebisacylamide (BIS) as a cross-linker and 4-cyanopentanoic acid dithiobenzoate as chain transfer reagent (CTA). The swelling behaviors were investigated and the hydrogels by RAFT polymerization (RAFT gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains mainly caused by CTA, which could retard the crosslinking reaction rate greatly. Another CTA, 3-(trithiocarbonyl) propanoic acid, was adopted to further investigate the effect of CTA. It showed the similar effect except the different accelerated degree to the shrinking kinetics. Furthermore, the living character of the RAFT process was used to polymerize a new batch of monomer (NIPAM) from functional RAFT gels to introduce grafted structure. The PNIPAM-g-PNIPAM hydrogels indicted further accelerated shrinking kinetics than functional backbone hydrogels.     

Swelling and dye adsorption study of novel superswelling [Acrylamide/N-vinylpyrrolidone/3(2-hydroxyethyl carbamoyl) acrylic acid] hydrogels

Summary Super swelling acrylamide (Am)/N-vinylpyrrolidone (NVP)/3-(2-hydroxyethyl carbamoyl) acrylic acid (HECA) hydrogels were prepared by free radical polymerization of quaternary mixtures of Am, NVP, HECA and water. The hydrogels were used in experiments on swelling, diffusion and adsorption of some water-soluble monovalent cationic dyes such as Crystal Violet (CV), Malachite Green (MG) and Methylene Blue (MB). In the experiment of the adsorption of dyes from their aqueous solutions type-S adsorption isotherm were found. The diffusion of water within the hydrogel was found to have non Fickian character. The uptake of dyes within the hydrogel increased in the following order: MG > MB > CV. The binding ratio of the hydrogel/dye systems was gradually increased with the increase of HECA content in the AAm/NVP/HECA hydrogel.     

Modulating properties of chemically crosslinked PEG hydrogels via physical entrapment of silk fibroin

A variety of polymers of synthetic origins (e.g., poly(ethylene glycol) or PEG) and macromolecules derived from natural resources (e.g., silk fibroin or SF) have been explored as the backbone materials for hydrogel crosslinking. Purely synthetic PEG‐based hydrogels are often chemically crosslinked to possess limited degradability, unless labile motifs are designed and integrated into the otherwise non‐degradable macromers. On the other hand, SF produced by Bombyx mori silkworm can be easily formulated into physical hydrogels. These physical gels, however, are less stable than the chemically crosslinked gels. Here, we present a simple strategy to prepare hybrid PEG‐SF hydrogels with chemically crosslinked PEG network and physically entrapped SF. Visible light irradiation initiated rapid thiol‐acrylate gelation to produce a network composed of non‐degradable poly(acrylate‐co‐NVP) chains, hydrolytically labile thioether ester bonds, and interpenetrating SF fibrils. We evaluated the effect of SF entrapment on the crosslinking efficiency and hydrolytic degradation of thiol‐acrylate PEG hydrogels. We further examined the effect of adding soluble SF or sonicated SF (S‐SF) on physical gelation of the hybrid materials. The impacts of SF or S‐SF inclusion on the properties of chemically crosslinked hybrid hydrogels were also studied, including gel points, gel fraction, equilibrium swelling ratio, and mesh size. We also quantified the fraction of SF retention in PEG hydrogels, as well as the influence of remaining SF on moduli and degradation of chemically crosslinked thiol‐acrylate PEG hydrogels. This simple hybrid hydrogel fabrication strategy should be highly useful in future drug delivery and tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43075.     

Kinetic degradation and controlled drug delivery system studies for sensitive hydrogels prepared by gamma irradiation

Ternary mixtures of N‐vinyl‐2‐pyrrolidone/itaconic acid and gelatin were irradiated by gamma rays at 30 kGy/s and at ambient temperature to prepared poly (NVP/IA and G) hydrogels. Poly (NVP/IA) hydrogels were prepared in different compositions (NVP/IA) mole ratio, (100/0), (98/1.5), (96.5/3.5), and (93/7.0) at 30 kGy. Then adding gelatin at different content (5, 10, 15, 20) mg to the best composition (NVP/IA/H₂O) (93/7)% for the characterization of network structure of these hydrogels, kinetic swelling drug release behavior and Scan Electron Microscope was studied. The equilibrium degree of swelling for P(NVP/IA) and P(NVP/IA/G) copolymer and the swelling‐degradation kinetics were also studies. According to dynamic swelling studies, both the diffusion exponent and the diffusion coefficient increase with increasing content of (IA), whereas, the addition of gelatin to (NVP/IA) composition by different content did not lead to any significant change in swelling percent. Also, the swelling behavior of copolymer hydrogels in response to pH value of the external media was studied, it is noted that the highest swelling values were at pH 4. The in vitro drug release behavior of these hydrogels was examined by quantification analysis with a UV/VIS spectrophotometers. Chlorpromazine hydrochloride was loaded into dried hydrogels to investigate the stimuli‐sensitive property at the specific pH and the drug release profile of these pH‐sensitive hydrogels in vitro. The release studies show that the highest value of release was at pH 4 which can be used for drug delivery system. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

N-vinylpyrrolidone/acrylic acid/2-acrylamido-2-methylpropane sulfonic acid based hydrogels: Synthesis,characterization and their application in the removal of heavy metals

In this work, the synthesis of N-vinylpyrrolidone/acrylic acid/2-acrylamido-2-methylpropane sulfonic acid (NVP/AAc/AMPS) based hydrogels by UV-curing technique was studied and their swelling behavior, heavy metal ion recovery capabilities were investigated. The structures of hydrogels were characterized by FT-IR analysis and the results were consistent with the expected structures. Thermal gravimetric analysis of hydrogels showed that the thermal stability of hydrogel decreases slightly with incorporation of AMPS units into the structure. In addition, the morphology of the dry hydrogel sample was examined by SEM. According to swelling experiments, hydrogels with higher AMPS content gave relatively higher swelling ratio compared to neat hydrogel. These hydrogels were used for the separation of Cd(II), Cu(II) and Fe(III) ions from their aqueous solutions. The influence of the uptake conditions such as pH, time and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. The selectivity of the hydrogel towards the different metal ions tested was Cd(II) > Cu(II) > Fe(III). It was observed that the specific interaction between metal ions and ionic co-monomers in the hydrogel affected the metal binding capacity of the hydrogel. The recovery of metal ions was also investigated in acid media.     

Synthesis of rapid responsive gels comprising hydrophilic backbone and poly(N-isopropylacrylamide) graft chains by RAFT polymerization and end-linking processes

A thermosensitive poly(N-isopropylacrylamide) (PNIPAM) grafted gel, which comprises hydrophilic backbone and freely mobile PNIPAM graft chains, was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and end-linking processes. Functional PNIPAM bearing dithiobenzoate end group (-C(S)S-R) was prepared first, and then it was reacted with divinyl compounds to obtain gel. In order to adjust the composition of the gels, two divinyl compounds, N,N-methylenebisacrylamide (BIS) and poly(ethylene glycol) diacrylate (PEGDAC), were used. The cross-linking polymerization mechanism was proposed. The swelling and deswelling kinetics of the hydrogels were measured. The gels exhibit rapid deswelling kinetics. At the same time, they show rapid swelling kinetics within 30 min, whereas a conventional PNIPAM-co-PEG-co-BIS gel with the same feed composition requires more than 10 h to reach swelling equilibrium.     

Effect of the cross-linking degree on the morphology of poly(NIPAAm-co-AAc) hydrogels

Hydrogels of poly(N-isopropylacrylamide) co-polymerized with acrylic acid [P(NIPAAm-co-AAc)] were synthesized with cross-linking degrees of 2-7% using (N,N′-methylenebisacrylamide). SEM micrographs revealed that the morphology of dry hydrogels changes from interconnected spherical pores to channel-like pores, with the change in the cross-linking degrees from 3 to 5%. The change in morphology is associated with a significant change in the swelling ratio. It was found that the diffusion rates and permeabilities of methylene blue (MB) through the hydrogel with channel-like pores are significantly higher if the main axes of the pores are oriented parallel to the flow of MB molecules, than if it is oriented perpendicularly. These results show that different morphologies can be obtained by controlling the cross-linking degree of P(NIPAAm-co-AAc) hydrogels in a narrow range around 5% and by performing the polymerization reaction in moulds placed in horizontal and vertical positions, opening a new perspective for modulating their properties in applications as matrices for controlled release of drugs or as membranes for separation processes.     

Preparation and characterization of pH-sensitive hydrogel microparticles as a biological on–off switch

The pH-responsive swelling and release behaviors of anionic P(MAA-co-EGMA) hydrogel microparticles having various MAA and EG contents were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. When DC was used as a dispersion stabilizer, well-dispersed hydrogel microparticles having an average diameter of approximately 4 μm were obtained. There was a drastic change of the equilibrium weight swelling ratio of P(MAA-co-EGMA) hydrogels at a pH of around 5, which is the pK _a of PMAA. When the MAA content in the hydrogel increased, the swelling ratio increased at a pH above 5 due to the more electrostatic repulsion between the charged groups of MAA. The P(MAA-co-EGMA) hydrogel microparticles showed a pH-responsive release behavior. At low pH (pH 4.0) small amounts of Rh-B were released while at high pH (pH 6.0) relatively large amounts of Rh-B were released from the hydrogels. The difference in the released amount of Rh-B from the hydrogels between pH 4.0 and 6.0 decreased when the MAA content in the hydrogels decreased, which means that the pH-responsive release behavior of the P(MAA-co-EGMA) hydrogel microparticles is closely related to the pH-responsive swelling property of the hydrogel.     

Fabrication of interpenetrating polymer network to enhance the biological activity of synthetic hydrogels

A three dimensional porous hydrogel with suitable biological and mechanical properties are required for bone tissue engineering. Hydrogels of poly(lactic-ethylene oxide fumarate) (PLEOF), crosslinked with poly(ethylene glycol)-diacrylate (PEG-da) have desirable mechanical properties, however, their application for bone regeneration is limited due to the lack of cell motif sites within their structure. The aim of this study was to incorporate a naturally derived polymer such as gelatin into PLEOF hydrogels to promote their biological properties. Interpenetrating polymer network (IPN) was used as an efficient technique to acquire uniform mixture of these two polymers. Additionally gas foaming agents were used to create pores with average diameter of 250 μm in these IPN hydrogels. The concentrations of PEG-da and gelatin were optimized to tune the mechanical strength and degradation properties of these hydrogels. A compression modulus of 500 kPa was achieved for hydrogel fabricated with 400 mg/ml PLEOF, 200 mg/ml PEG-da and 150 mg/ml gelatin. The addition of gelatin to PLEOF elevated the compression modulus by two-fold and decreased the energy loss by 40%. The result of protein analysis demonstrated that IPN substantially enhanced the retention of physically crosslinked gelatin in the 3D structure of hydrogel. More than 50% of gelatin was retained in IPN hydrogel after two weeks of incubation in simulated physiological environment. Preserving gelatin in the hydrogel structure provides cell motif sites for a longer period of time, which is desirable for uniform cell proliferation. In vitro studies showed that primary human osteoblast cells adhered and proliferated in PLEOF-gelatin hydrogel. These results demonstrated the potential of using this IPN hydrogel for bone tissue engineering.     

Radiation synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone/acrylic acid) and poly(N‐vinyl‐2‐pyrrolidone/acrylamide) hydrogels for some metal‐ion separation

Two different hydrogels, prepared from N‐vinyl‐2‐pyrrolidone/acrylic acid (NVP/AAc) and N‐vinyl‐2‐pyrrolidone/acrylamide (NVP/AAm), were studied for the separation and extraction of some heavy‐metal ions from wastewater. The hydrogels were prepared by the γ‐radiation‐induced copolymerization of the aforementioned binary monomer mixtures. Further modification was carried out for the NVP/AAc copolymer through an alkaline treatment to improve the swelling behavior by the conversion of the carboxylic acid groups into its sodium salts. The thermal stability and swelling properties were also investigated as functions of the N‐vinyl‐2‐pyrrolidone content. The characterization and some selected properties of the prepared hydrogels were studied, and the possibility of their practical use in wastewater treatment for heavy metals such as Cu, Ni, Co, and Cr was investigated. The maximum uptake for a given metal was higher for a treated NVP/AAc hydrogel than for an untreated NVP/AAc hydrogel and was higher for an untreated NVP/AAc hydrogel than for an NVP/AAm hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2642–2652, 2004