Synthesis of poly(fluorinated styrene)‐block‐poly(ethylene oxide) amphiphilic copolymers via atom transfer radical polymerization: potential application as paper coating materials

BACKGROUND: The surface of a substrate which comprises a fibrous material is brought into contact with a type of amphiphilic block copolymer which comprises hydrophilic/hydrophobic polymeric blocks. These amphiphilic copolymers have been synthesized by atom transfer radical polymerization (ATRP) technique. The atom transfer radical polymerization of poly(2,3,4,5,6‐pentafluorostyrene)‐block‐poly(ethylene oxide) (PFS‐b‐PEO) copolymers (di‐ and triblock structures) with various ranges of PEO molecular weights was initiated by a PEO chloro‐telechelic macroinitiator. The polymerization, carried out in bulk and catalysed by copper(I) chloride in the presence of 2,2′‐bipyridine ligand, led to A–B–A amphiphilic triblock and A–B amphiphilic diblock structures. RESULTS: With most of the macroinitiators, the living nature of the polymerizations led to block copolymers with narrow molecular weight distributions (1.09 < M_w/M_n < 1.33) and well‐controlled molecular structures. These block copolymers turned out to be water‐soluble through adjustment of the PEO block content (>90 wt%). Of all the block copolymers synthesized, PFS‐b‐PEO(10k)‐b‐PFS containing 10 wt% PFS was found to retard water absorption considerably. CONCLUSION: The printability of paper treated with the copolymers was evaluated with contact angle measurements and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. Copyright © 2009 Society of Chemical Industry     

The potential of Cu(I)Cl/2,2′‐bipyridine catalysis in a triblock copolymer preparation by atom transfer radical polymerization

The ability of atom transfer radical polymerization (ATRP) in the sequential synthesis of triblock copolymers was examined using Cu(I)Cl/2,2′‐bipyridine catalysis at 110°C in toluene, starting from PMMA macroinitiators terminated with the C‐Br group. The PMMAs were prepared by living anionic or group transfer polymerization (GTP), followed by bromination of the respective active site with Br₂ or N‐bromosuccinimide (NBS). The yield of the terminal bromination in the products of both living polymerizations was 60–64% at best, compared with the yield of the bromination of 1‐methoxy‐(1‐trimethylsilyloxy)prop‐1‐ene (a model of the GTP active site) with NBS, as found by ¹H‐NMR. The PMMA macroinitiators prepared were utilized to start the sequential ATRP, finally affording PMMA‐b‐PBuA‐b‐PSt (M_n 69,100), PMMA‐b‐PSt‐b‐PBuA (M_n 21,300) and PMMA‐b‐PSt‐b‐PMMA (M_n 35,200), which have not yet been synthesized by ATRP. After the second block has been formed, the Br‐unterminated part of PMMA macroinitiator was removed by extraction or repeated precipitation. In the third (last) sequence polymerization, induction periods were observed. The first two triblock copolymers were free of precursors and have M_w/M_n values 1.5–1.6 (SEC). In the course of the last step of PMMA‐b‐PSt‐b‐PMMA synthesis, the content of the PMMA‐b‐PSt precursor slowly decreased with increasing MMA conversion. Still, at ≈90% MMA conversion, about 10–15% of the precursor remained in the product. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3514–3522, 2001     

Controlled synthesis and characterizations of amphiphilic poly[(R,S)-3-hydroxybutyrate]-poly(ethylene glycol)-poly[(R,S)-3-hydroxybutyrate] triblock copolymers

Well-defined biodegradable amphiphilic triblock copolymers consisting of atactic poly[(R,S)-3-hydroxybutyrate] (PHB) and poly(ethylene glycol) (PEG) as the side hydrophobic block and middle hydrophilic block were synthesized via ring opening polymerization of (R,S)-β-butyrolactone from PEG macroinitiators and characterized using NMR, GPC, FT-IR, XRD, DSC and TG analyses. The controlled synthesis was made possible by the facile synthesis of pure PEG macroinitiators through a TEMPO-mediated oxidation. Constituting 40-70 wt% of the copolymer content, PHB blocks grown were amorphous while PEG formed crystalline phase when segment was sufficiently long. While hindering PEG crystallization, atactic PHB mixed well with amorphous PEG to give single T_g in all the copolymers. The copolymers exhibited two-step thermal degradation profile starting with PHB degradation from 210 to 300 °C, then PEG from 350 to 450 °C.     

PTPFCBBMA-b-PEG-b-PTPFCBBMA amphiphilic triblock copolymer: Synthesis and self-assembly behavior

We present the synthesis and self-assembly behavior of a new semi-fluorinated amphiphilic triblock copolymer. A series of perfluorocyclobutyl aryl ether-based amphiphilic ABA triblock copolymer containing hydrophilic poly(ethylene glycol) segment as the middle block were synthesized by atom transfer radical polymerization (ATRP). ATRP of 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate was initiated by PEG-based bifunctional macroinitiators with different molecular weights to obtain the desired copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.30) and the number of perfluorocyclobutyl linkage can be tuned by the feed ratio and the conversion of the fluorine-containing methacrylic monomer. The critical micelle concentrations of these amphiphilic ABA triblock copolymers in aqueous media were determined by fluorescence probe technique. They could aggregate to form spherical and cylindrical micelles visualized by TEM with varying the content of hydrophobic segment.     

Synthesis and characterization of perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer

Perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer containing hydrophilic poly(ethylene glycol) segment was synthesized by atom transfer radical polymerization (ATRP). Perfluorocyclobutyl-containing methacrylate-based monomer, 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate, was prepared firstly, which can be polymerized by ATRP in a controlled way to obtain well-defined homopolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.30). The molecular weights increased linearly with the conversions of monomer and the apparent polymerization rate exhibited first-order relation with respect to the concentration of monomer. ATRP of 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate was initiated by PEG-based macroinitiators with different molecular weights to obtain amphiphilic diblock copolymers with narrow molecular weight distributions (M_w/M_n < 1.35) and the number of perfluorocyclobutyl linkage can be tuned by the feed ratio and the conversion of the fluorine-containing methacrylate monomer. The critical micelle concentrations of these amphiphilic diblock copolymers in water and brine were determined by fluorescence probe technique. The morphologies of the micelles were found to be spheres by TEM.     

Preparation and characterization of polystyrene–poly(ethylene oxide) amphiphilic block copolymers via atom transfer radical polymerization: Potential application as paper coating materials

Poly(ethylene oxide) (PEO) monochloro macroinitiators or PEO telechelic macroinitiators (Cl‐PEO‐Cl) were prepared from monohydroxyfunctional or dihydroxyfunctional PEO and 2‐chloro propionyl chloride. These macroinitiators were applied to the atom transfer radical polymerization of styrene (S). The polymerization was carried out in bulk at 140°C and catalyzed by Copper(I) chloride (CuCl) in the presence of 2,2′‐bipyridine (bipy) ligand (CuCl/bipy). The amphiphilic copolymers were either A‐B diblock or A‐B‐A triblock type, where A block is polystyrene (PS) and B block is PEO. The living nature of the polymerizations leads to block copolymers with narrow molecular weight distribution (1.072 < M_w/M_n < 1.392) for most of the macroinitiators synthesized. The macroinitiator itself and the corresponding block copolymers were characterized by FTIR, ¹H NMR, and SEC analysis. By adjusting the content of the PEO blocks it was possible to prepare water‐soluble/dispersible block copolymers. The obtained block copolymers were used to control paper surface characteristics by surface treatment with small amount of chemicals. The printability of the treated paper was evaluated with polarity factors, liquid absorption measurements, and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. From our study, it is observed that the chain length of the hydrophilic block and the amount of hydrophobic block play an important role in modification of the paper surface. Among all of block copolymers synthesized, the PS‐b‐PEO‐b‐PS containing 10 wt % PS was found to retard water absorption considerably. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4304–4313, 2006     

Synthesis of block copolymers from PDMS macroinitiators

The synthesis of polystyrene‐b‐polydimethylsiloxane‐b‐polystyrene (PSt‐b‐PDMS‐b‐PSt) copolymers is described. Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide resulting in the PDMS macroinitiators. The terminal alkyl bromide groups were then used as initiators for atom transfer radical polymerization (ATRP) to produce block copolymers. Using this technique, triblock copolymers consisting of a PDMS centre block and polystyrene terminal blocks were synthesized. ATRP of St from those macroinitiators showed linear increases in M_n with conversion, demonstrating the effectiveness of ATRP to synthesize a variety of inorganic/organic polymer hybrids. Copyright © 2004 Society of Chemical Industry     

Comparison of morphologies and mechanical properties of crosslinked epoxies modified by polystyrene and poly(methyl methacrylate)) or by the corresponding block copolymer polystyrene-b-poly(methyl methacrylate)

Polystyrene (PS, M_n=28,400, PI=1.07), poly(methyl methacrylate) (PMMA, M_n=88,600, PI=1.03), and PS (50,000)-b-PMMA (54,000) (PI=1.04), were used as modifiers of an epoxy formulation based on diglycidyl ether of bisphenol A (DGEBA) and m-xylylene diamine (MXDA). Both PS and PMMA were initially miscible in the stoichiometric mixture of DGEBA and MXDA at 80 °C, but were phase separated in the course of polymerization. Solutions containing 5 wt% of each one of both linear polymers exhibited a double phase separation. A PS-rich phase was segregated at a conversion close to 0.02 and a PMMA rich phase was phase separated at a conversion close to 0.2. Final morphologies, observed by scanning electron microscopy (SEM), consisted on a separate dispersion of PS and PMMA domains. A completely different morphology was observed when employing 10 wt% of PS-b-PMMA as modifier. PS blocks with M_n=50,000 were not soluble in the initial formulation. However, they were dispersed as micelles stabilized by the miscible PMMA blocks, leading to a transparent solution up to the conversion where PMMA blocks began to phase separate. A coalescence of the micellar structure into a continuous thermoplastic phase percolating the epoxy matrix was observed. The elastic modulus and yield stress of the cured blend modified by both PS and PMMA were 2.64 GPa and 97.2 MPa, respectively. For the blend modified by an equivalent amount of block copolymer these values were reduced to 2.14 GPa and 90.0 MPa. Therefore, using a block copolymer instead of the mixture of individual homopolymers and selecting an appropriate epoxy-amine formulation to provoke phase separation of the miscible block well before gelation, enables to transform a micellar structure into a bicontinuous thermoplastic/thermoset structure that exhibits the desired decrease in yield stress necessary for toughening purposes.     

Amphiphilic poly(acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid) pentablock copolymers from a combination of quasiliving carbocationic and atom transfer radical polymerization

Amphiphilic poly(acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid) (PAA-PS-PIB-PS-PAA) block copolymers were prepared using a combination of quasiliving carbocationic and atom transfer radical polymerization (ATRP) techniques. Poly(styrene-b-isobutylene-b-styrene) (PS-PIB-PS) block copolymer macroinitiators with targeted molecular weights and high degrees of chain end functionality (F_n>1.7) were prepared by quasiliving carbocationic polymerization of isobutylene followed by sequential addition of styrene. Poly(tert-butyl acrylate-b-styrene-b-isobutylene-b-styrene-b-tert-butyl acrylate) (PtBA-PS-PIB-PS-PtBA) pentablock terpolymers with targeted molecular weights and low polydispersities (PDIs) were synthesized from the PS-PIB-PS macroinitiators via ATRP of tBA using either a Cu(I)Cl/1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2-(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. Deprotection of the tert-butyl groups using trifluoroacetic acid at 25 °C resulted in the formation of PAA-PS-PIB-PS-PAA pentablock terpolymers. Comonomer composition of the final terpolymers, determined by ¹H-NMR spectroscopy, was very close to theoretical.     

Preparation of star copolymers with three arms of poly(ethylene oxide-co-glycidol)-graft-polystyrene and investigation of their aggregation in water

The star graft copolymers with three arms composed of poly(ethylene oxide) (PEO) as main chain and polystyrene (PS) as side chains were prepared by sequential anionic ring-opening copolymerization of ethylene oxide and ethoxyethyl glycidyl ether (EEGE), and then atom transfer radical polymerization (ATRP) of styrene. The anionic ring-opening copolymerization of EO and EEGE was carried out using 2-ethyl-2-hydroxymethyl-1,3-propanediol as trifunctional initiator and diphenylmethyl potassium (DPMK) as deprotonating agent. The resulting three-arm star copolymer [poly(EO-co-EEGE)]₃ could be easily hydrolyzed to unmask the pendant hydroxyl groups without affecting the PEO chains. The switch from the first to the second mechanism was completed by the reaction of the multi-pendant hydroxyl groups of three-arm PEO chain with 2-bromoisobutyryl bromide. The obtained poly(ethylene oxide-co-2-bromoisobutyryloxyglycidyl ether), [poly(EO-co-BiBGE)]₃, was used as macroinitiators to initiate the polymerization of styrene in bulk at 90 °C by ATRP. The final products and intermediates were characterized by NMR, SEC and IR in detail. The amphiphilic star graft copolymers synthesized can form micelles in water. The critical micelle concentration (cmc) determined by fluorescence spectra was about 5 × 10⁻⁷ g/mL. Sphere micelles were observed by transmission electron microscopy (TEM) at low copolymer concentration (6 × 10⁻⁵ g/mL), but the micelle shape became irregular when the copolymer concentration increased to 6 × 10⁻⁴ g/mL.     

Heterografted PEO-PnBA brush copolymers

A series of P[(HEMA-TMS)-co-PEOMA] graft copolymers with different amounts of incorporated macromonomer grafts were prepared by copolymerization of a PEO macromonomer (PEOMA, MW_av=1100 g/mol, DP_PEO=23) with 2-(trimethylsilyloxy)ethyl methacrylate (HEMA-TMS) using various initial ratios of the comonomers via atom transfer radical polymerization. After transformation of the HEMA-TMS units to 2-(2-bromopropionyloxy)ethyl methacrylate (BPEM), the resulting P(BPEM-co-PEOMA) copolymers were used as macroinitiators for the controlled polymerization of nBA in a ‘grafting from’ reaction. The resulting densely heterografted brush copolymers with a uniform length of PEO grafts (DP_PEO=23) and a range of lengths for the PnBA side chains (DP_PnBA=15-60) depending solely on the reaction time. Analysis of the bulk properties showed that the specific architecture of the copolymers suppresses crystallization of the PEO, and consequently leads to amorphous, homogeneous materials.     

Synthesis and characterization of Pst‐b‐PDMS‐b‐PSt copolymers by atom transfer radical polymerization

Polystyrene‐b‐poly(dimethylsiloxane)‐b‐polystyrene (Pst‐b‐PDMS‐b‐PSt) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide, resulting in the PDMS macroinitiators for the ATRP of styrene (St). The latter procedure was carried out at 130°C in a phenyl ether solution with CuCl and 4, 4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. By using this technique, triblock copolymers consisting of a PDMS center block and polystyrene terminal blocks were synthesized. The polymerization was controllable; ATRP of St from those macroinitiators showed linear increases in M_n with conversion. The block copolymers were characterized with IR and ¹H‐NMR. The effects of molecular weight of macroinitiators, macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3764–3770, 2004     

Graft copolymers with hydrophilic and hydrophobic polyether side chains

Poly(ethylene glycol)methyl ether methacrylate (PEOMA) and oligo(propylene glycol)-4-nonylphenyl ether acrylate (OPOPhNA) were copolymerized by atom transfer radical polymerization (ATRP). Grafting through method was employed in the presence of CuBr/HMTETA or CuBr/PMDETA catalyst/ligand complex in anisole at 70 °C. It yielded a heterografted copolymers containing hydrophilic PEO and hydrophobic OPOPhNA side chains with polymerization degree DP = 68-315 in the presence of PMDETA and DP = 48-195 in the presence HMTETA. Moreover, higher reactivity of PEOMA than OPOPhNA (r_methacrylate > r_acrylate), which was observed during copolymerization, suggested the formation of copolymers with a spontaneous gradient composition starting from the grafted segment of P(PEOMA). The molecular weight distribution (MWD) was increased with DP in the range 1.2-1.6. The X-ray diffraction analysis (WAXS) indicated that larger number of PEO segments generated crystalline properties in the copolymers with amorphous OPOPhNA.     

Synthesis and characterization of amphiphilic graft copolymer poly(ethylene oxide)-graft-poly(methyl acrylate)

A novel well-defined amphiphilic graft copolymer of poly(ethylene oxide) as main chain and poly(methyl acrylate) as graft chains is successfully prepared by combination of anionic copolymerization with atom transfer radical polymerization (ATRP). The glycidol is protected by ethyl vinyl ether first, then obtained 2,3-epoxypropyl-1-ethoxyethyl ether (EPEE) is copolymerized with EO by initiation of mixture of diphenylmethyl potassium and triethylene glycol to give the well-defined poly(EO-co-EPEE), the latter is deprotected in the acidic conditions, then the recovered copolymer [(poly(EO-co-Gly)] with multi-pending hydroxyls is esterified with 2-bromoisobutyryl bromide to produce the ATRP macroinitiator with multi-pending activated bromides [poly(EO-co-Gly)_(ATRP)] to initiate the polymerization of methyl acrylate (MA). The object products and intermediates are characterized by NMR, MALDI-TOF-MS, FT-IR, and SEC in detail. In solution polymerization, the molecular weight distribution of the graft copolymers is rather narrow (M_w/M_n < 1.2), and the linear dependence of Ln [M₀]/[M] on time demonstrates that the MA polymerization is well controlled.     

Synthesis and applications of triblock and multiblock copolymers using telechelic oligopropylene

Isotactic polypropylene (iPP)-polystyrene (PS) and iPP-poly(methyl methacrylate) (PMMA) multiblock copolymers were synthesized by atom transfer radical coupling (ATRC) of PS-iPP-PS and PMMA-iPP-PMMA triblock copolymers obtained by atom transfer radical polymerization (ATRP) of styrene (St) and methyl methacrylate (MMA), respectively, using α,ω-dibromoisobutyrateoligopropylene (iPP-Br) as a bifunctional macroinitiator. The iPP-Br was prepared by hydroxylation and subsequent esterification of telechelic oligopropylene having terminal vinylidene double bonds at both ends obtained by controlled thermal degradation of iPP. ATRP of St and (meth) acrylic monomers using iPP-Br formed the corresponding triblock copolymers. It was confirmed that the PMMA-iPP-PMMA triblock copolymer was effective as the compatibilizer for the iPP/PMMA blend. An iPP-PS multiblock copolymer (M_n: 25?000 g/mol and M_w/M_n: 4.1) was prepared by ATRC of PS-iPP-PS triblock copolymer (M_n: 8900 g/mol and M_w/M_n: 1.3). ATRC with St of PMMA-iPP-PMMA triblock copolymer (M_n: 13?000 g/mol and M_w/M_n: 1.4) provided an iPP-PMMA multiblock copolymer containing St chains (M_n: 39?000 g/mol and M_w/M_n: 2.8).     

PBT-b-PEO-b-PBT triblock copolymers: Synthesis,characterization and double-crystalline properties

We demonstrated here a facile method to synthesize novel double crystalline poly(butylene terephthalate)-block-poly(ethylene oxide)-block-poly(butylene terephthalate) (PBT-b-PEO-b-PBT) triblock copolymers by solution ring-opening polymerization (ROP) of cyclic oligo(butylene terephthalate)s (COBTs) using poly(ethylene glycol) (PEG) as macroinitiator and titanium isopropyloxide as catalyst. The structure of copolymers was well characterized by ¹H NMR and GPC. TGA results revealed that the decomposition temperature of PEO in triblock copolymers increased about 30 °C to the same as PBT copolymers, after being end-capped with PBT polymers. These triblock copolymers showed double crystalline properties from PBT and PEO blocks, observed from DSC and WAXD measurements. The melting and crystallization peak temperatures corresponding to PBT blocks increased with PBT content. The crystallization of PBT blocks showed the strong confinement effects on PEO blocks due to covalent linking of PBT blocks with PEO blocks, where the melting and crystallization temperatures and crystallinity corresponding to PEO blocks decreased significantly with increment of PBT content. The confinement effect was also observed by SAXS experiments, where the long distance order between lamella crystals decreases with increasing PBT length. For the triblock copolymer with highest PBT content (PBT₅₄-b-PEO₂₂₇-b-PBT₅₄), this effect shows a 30 °C depression on PEO crystals' melting temperature and 77% on enthalpy, respectively, compared to corresponding PEO homopolymer. The crystal morphology was observed by POM, and amorphous-like spherulites were observed during PBT crystallization.     

New water soluble azobenzene-containing diblock copolymers: synthesis and aggregation behavior

Homopolymers of azobenzene (azo) methacrylates with different substituents and their diblock copolymers with poly(2-(dimethylamino)ethyl methacrylate p(DMAEMA) were synthesized via atom transfer radical polymerization (ATRP). Controlled/‘living’ ATRP of azo methacrylates were achieved up to ∼50% conversion, after which deviation occurred. It was found that the copolymerization rate of 6-[4-phenylazo]phenoxy]hexylmethacrylate (PPHM) from p(DMAEMA) macroinitiator was almost identical to that for the homopolymerization of PPHM monomer, with k_app∼0.0078 min⁻¹. For the copolymerizations, almost complete incorporation of the azo methacrylate monomers could be obtained with low molecular weight macroinitiator (PDMAEMA)-Cl, whereas macroinitiators of long chain length did not give full conversion, most likely due to chain floding and steric hindrance caused by the bulk azo monomers. Because azo monomers are highly hydrophobic, only the diblock copolymers with short azo segment were soluble in water which self-assembled into micellar particles. The effect of photo-induced trans-cis isomerization on lower critical solution temperature (LCST) and surface tension were studied. The LCST of the diblock copolymers increased upon irradiation by UV light due to the cis conformers being more hydrophilic. However, the trans-cis isomerization had only small effect on the critical micelle concentration (cmc) and γ_cmc of azo methacrylate block copolymers, due to the formation of compact core of the micelles. The formations of core-shell micelles were established from LLS and TEM studies. All the three azo methacrylate amphiphilic block copolymers formed hard core-shell micelles with relatively small R_h values of 31 nm for p(DMAEMA₁₇₂-b-BPHM₇), 26 nm for p(DMAEMA₁₇₂-b-CPHM₇) and 32 nm for p(DMAEMA₁₇₂-b-PPHM₉). Whereas for the azo acrylate copolymer, p(DMAEMA₁₇₂-b-BPHA₆), large micelles with R_h∼78 nm with loose core was formed.     

A novel well-defined amphiphilic diblock copolymer containing perfluorocyclobutyl aryl ether-based hydrophobic segment

A series of well-defined binary hydrophilic-fluorophilic diblock copolymers were synthesized by successive atom transfer radical polymerization (ATRP) of methoxylmethyl acrylate (MOMA) and 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate (TPFCBBMA) followed by the acidic selective hydrolysis of the hydrophobic poly(methoxymethyl acrylate) (PMOMA) segment into the hydrophilic poly(acrylic acid) (PAA) segment. ATRP of MOMA was initiated by 2-MBP at 50 °C in bulk to give two different PMOMA homopolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.15). PMOMA-b-PTPFCBBMA well-defined diblock copolymers were synthesized by ATRP of TPFCBBMA at 90 °C in anisole using Br-end-functionalized PMOMA homopolymer as macroinitiator and CuBr/PMDETA as catalytic system. The final PAA-b-PTPFCBBMA amphiphilic diblock copolymers were obtained via the selective hydrolysis of PMOMA block in dilute HCl without affecting PTPFCBBMA block. The critical micelle concentrations (cmc) of PAA-b-PTPFCBBMA amphiphilic copolymers in aqueous media were determined by fluorescence spectroscopy using pyrene as probe and these diblock copolymers showed different micellar morphologies with the changing of the composition.     

Synthesis of poly[dimethylsiloxane-block-oligo(ethylene glycol) methyl ether methacrylate]: an amphiphilic copolymer with a comb-like block

AB amphiphilic comb-like block copolymers of poly(oligo[ethylene glycol] methyl ether methacrylate) and polydimethylsiloxane were synthesised with a methodology based on atom transfer radical polymerization (ATRP). The anionic ring opening polymerisation of hexamethylcyclotrisiloxane followed by reaction with 3-(chlorodimethylsilyl) propyl 2-bromo-2-methylpropanoate propyldimethylchlorosilane gave suitable macroinitiators for the ATRP of oligo[ethylene glycol] methyl ether methacrylate. The latter synthetic procedure was optimised by performing a number of syntheses varying the reaction solvent, catalytic complex and the temperature used. Copolymers with relatively high polydispersity indices (M_w/M_n>1.3) could be synthesised at room temperature by employing a Cu(I)Br:N,N,N′,N′,N″-pentamethyldiethylenetriamine complex in n-propanol with Cu(II)Br. The optimum reaction conditions employed a Cu(I)Cl:N-(n-propyl)-2-pyridyl(methanimine) complex with an n-propanol/water mixture or toluene as solvent at 90 °C. This gave block copolymers of the desired molecular weights and polydispersity indices of less than 1.1. The block copolymers were characterised with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography.     

Original route to polylactide–polystyrene diblock copolymers containing a sulfonyl group at the junction between both blocks as precursors to functional nanoporous materials

Novel functionalized nanoporous polymeric materials could be derived from poly(D,L-lactide)-block-polystyrene (PLA-b-PS) diblock copolymers with a sulfonyl group at the junction between both blocks were synthesized by a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) using a synthetic difunctional initiator through a three-step sequential methodology. Different ω-bromo PLA polymers with various molar masses ranging from 3640 to 11,440 g mol⁻¹ were first produced by coupling ω-hydroxy PLA precursors to a chlorosulfonyl-functionalized ATRP initiator previously prepared, thus leading to the formation of suitable macroinitiators for the subsequent ATRP polymerization of styrene. Consequently, PLA-b-PS diblock copolymers were obtained with a finely tuned PLA volume fraction (f_PLA) in order to develop a microphased-separation morphology. The resulting copolymers as well as the intermediate compounds were carefully analyzed by size exclusion chromatography and ¹H NMR. Upon shear flow induced by a channel die processing, oriented copolymers were generally afforded as characterized by small-angle-X-ray scattering (SAXS). Such copolymers were finally submitted to mild alkaline conditions so as to hydrolyze the sacrificial PLA block, and the presence of the sulfonic acid functionality on the pore walls of the resulting nanoporous materials was evidenced by means of a post-modification reaction consisting in the corresponding sulfonamide formation.